WIG varilni aparat, elektrodni varilni aparat, električni varilni stroj

MESSER GRIESHEIM Uniwig GW 280 AC/DC

Stanje: zelo dobro (rabljeno), Here we offer a Heraeus heating and circulating air drying oven. Heraeus Heating and Circulating Air Drying Oven temperature up to 300°C Manufacturer / Model: Heraeus UT 6060 Features: - Temperature range: up to 300°C - Net volume: 52 liters - Weight (empty): 53 kg - Internal dimensions: Depth 403 mm, Width 340 mm, Height 380 mm - External dimensions: Depth 744 mm, Width 535 mm, Height 552 mm Godsd Hpv Ajpfx Afqebg - Rated voltage: 230V, Rated frequency: 50/60Hz, Rated current: 6.8A, Rated power: 1.50kW - Includes 2 shelves - Model: UT 66060 - Condition: used - Scope of supply: (see picture) (Specifications are subject to change and errors excepted!) For further questions, feel free to contact us by phone.

Leto izdelave: 2013, Stanje: pripravljen za uporabo (rabljen), The following units are available: one Rehm Invertig Pro 350 AC/DC and one Rehm Invertig Pro 450 DC, both used and in good condition. 1) Invertig Pro 350 AC/DC Standards: IEC 60 974-1, IEC 60 974-2 Welding current range (TIG): 3–350A Output voltage U₂ (at maximum current): approx. 24V Open circuit voltage U₀: approx. 91V Duty cycle (DC): 100% (for TIG at 350A) Mains voltage/input: 3-phase, 400V, 50Hz Protection class: IP 23S, safety class S Adjustment range: 3–350A (TIG) for AC/DC version Duty cycle: 100% at 40°C, 350A (TIG), 100% DC Input fuse: 32A at 3x400V for the 350 AC/DC version Dimensions: length 520mm, width 360mm, height 460mm Weight: 29.5kg (AC/DC version) 2) Invertig Pro 450 DC Standard: IEC 60 974-1 Welding current range (TIG): 3–450A Output voltage U₂ at maximum current: approx. 28V Gsdpfx Afjxddameqsbg Open circuit voltage U₀: approx. 91V Duty cycle (DC): 100% at 450A (TIG); for electrode welding, duty cycle is lower (approx. 60%) Mains/input: 3x400V, 50Hz Protection class: IP 23S Duty cycle at 100% DC, 450A (TIG) at 40°C Electrode welding current: approx. 360A at 100% DC (electrode) for the 450 DC version Power/input fuse: 32A at 400V (three-phase) for the 450 versions Dimensions: length 520mm, width 360mm, height 460mm Weight: approx. 28kg On-site inspection is possible.

Leto izdelave: 2010, obratovalne ure: 29.000 h, Stanje: zelo dobro (rabljeno), Catégorie : Extrudeuse bi-vis Gsdpfx Afoxykcgjqebg Numéro : DE27699 Fabricant : Coperion - Werner & Pfleiderer Modèle : ZSK 50 MCC+ Année de fabrication : 2010 Diamètre des vis : 2 x Ø 50,0 mm Rapport L/D : 48:1 Moteur d'entraînement : 129 kW Détails : Co-rotative, vis et cylindre segmentés, pompe à vide, thermorégulateur, 2x alimentations latérales, 1x dégazage latéral L’extrudeuse est en très bon état et n’a que 29 000 heures de fonctionnement. Options : Système de dosage 7 voies Motan Colortronic, séchoir (Motan LA 1200/4), extraction de brins IPS, convoyeur à brins, bain d’eau, granulateur, tamis vibrant – disponible immédiatement moyennant un supplément. Cette offre ne correspond pas à vos attentes ? Veuillez visiter notre site web Plama ou nous envoyer votre demande détaillée. Nous avons des solutions adaptées à presque tous les budgets dans notre gamme.

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Multifunkcijski varilni stroj (MIG, TIG, elektrode) Znamka: Kemppi Model: Pro 3000 / Promig 500 Stroj s hlajenjem z vodo in hladilnikom Kemppi PRO Cool 10. Enota za TIG/elektro varjenje Kemppi PRO TIG 410 - Panel Kemppi TL - Funkcije za TIG varjenje: predplin, poplin, oblok, visoka frekvenca TIG generator Kemppi Pro 3000 Gbsdpjxf Hv Hefx Afqsg Enota za MIG/žično varjenje Kemppi PRO MIG 500 - Delovni cikel: 500A – 60% - Kontrolna plošča Kemppi ML SYNERGIC - 4 pogonski valji - Impulzni obločni tok s Synergic panelom - Posebne funkcije za varjenje jekla, nerjavnega jekla in aluminija Vključuje: - TIG varilna pištola - MIG varilna pištola - Masa - Regulator za plin

Stanje: rabljeno, Technical details: Power consumption: 240 A Voltage: 3x400 V Open-circuit voltage: 91 V Apparent power: 9.3 kVA Approx. machine weight: 28 kg Machine dimensions: 1.0 x 0.6 x 1.0 m Welding Rectifier (Inverter) TIG (Steel/Stainless Steel) and Manual Arc Welding Direct current TIG = up to 240 A / 19.6 V Manual Arc Welding = up to 240 A / 19.6 V 2/4-stroke mode switching, stepless switchable to pulse Gedpfxju U Iixo Afqjbg Protection classification: IP 23 Water-cooled with frost protection Shielding gas / solenoid valve Torch head gas-cooled with remote control for welding current Equipment: Hose package 7.4 meters Ground clamp and ground cable 4.2 meters

Stanje: rabljeno, Leto izdelave: 2010, obratovalne ure: 76.256 h, Funkcionalnost: popolnoma funkcionalen, Oprema: Na voljo je tipska ploščica, Frequency-controlled compressor Oil & filters replaced Compair Model: L22SR-7.5A V2 Free air delivery: 3.53 m³/min Max. pressure: 10 bar Motor power: 22 kW Year of manufacture: 12/2010 Operating hours: 76,256 Weight: 355 kg A matching refrigerated dryer and 2000L compressed air tank are available separately. The machine can be tested under power on site by arrangement. Gsdpfx Aswvac Refqobg All information given without guarantee Subject to errors and prior sale.

Stanje: kot nova (razstavni stroj), Fronius TPS 3200 ✅ Scope of delivery: ➤ Fronius TPS 3200 power source (320A TRANS PULS SYNERGIC) ➤ Fronius FK 4000 FC cooling unit – Equipped as standard with Flow Control, Thermocontrol, and coolant filter. The unit shuts down if the water cooling fails or overheats to protect the torch assembly. These features typically cost around €400 extra at Fronius. ➤ Fronius VR 7000 wire feed case – Compact and practical – in our opinion, the most sensible wire feed case. The wire spool is safely stored inside the closed case. ➤ Fronius intermediate hose package, long version – each unit includes a 5-meter connecting hose set between the power source and wire feeder for greater flexibility and improved handling. Take the wire feed case off the machine to reach difficult areas! The connecting hose is neatly mounted on a hook at the side of the unit (hooks are manufactured by us). ➤ Fronius large transport cart – Probably the best cart with gas cylinder holder on the market. ➤ Binzel torch package – With up/down amperage adjustment on the torch handle. ➤ Earth cable 3–4m Dobkh Hjum Rw Dsufpokk (unclear term left untranslated) ➤ New Messer pressure regulator ➤ New basket spool adapter for large wire spools With this equipment you can weld nearly all materials, including aluminium, steel, and V2A. It features cold wire programmes and is also suitable for Mig brazing (CuSi), which is widely used in sheet metalworking. Additional options available for a surcharge, for example Fronius Job Master torch package (display on torch) + EUR 500.00 Gedpfxjwbilxe Afqsbg ----- IMMEDIATELY AVAILABLE PROPER INVOICE Inspection possible in Vienna, Austria 1230! ✔ Insured shipping on pallet available! ✔ We are also available via Whatsapp and Viber. ✅Questions✅Questions✅Questions✅ Questions: ✅Questions✅Questions✅ Questions✅ ►►►What is the condition of the equipment? For clarification: we buy nearly new pre-owned units, dismantle and check everything, replace wear parts if necessary, and only release for sale after successful test welding. "All" equipment is clean and has neither burn marks on the display nor multiple burn holes or dents across the unit! You are buying an item from us that is also ⭐worth seeing and does not look completely worn out! ►►►Do we receive an invoice with the purchase? Yes, you will receive a proper invoice from us. If you have a valid VAT ID and meet the requirements for an intra-Community delivery within the EU, we can issue a net invoice. ►►►What are the payment options? Prepayment or cash on collection in person. ►►►Why buy from us? We are professionals for this Fronius welding machine series and always stock 60–80 units – exclusively Fronius, no other brands! We know these machines inside out and never sell anything we aren't fully familiar with.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2010, Funkcionalnost: popolnoma funkcionalen, WE Flexmaster 400 Laser Welding Machine Year of manufacture: 2010 Laser unit: TruDisk 3302, Trumpf Chiller: P805-17640, Termotek Material: Mild steel sheet and stainless steel sheet Gbsdpfx Aev Ipcfsfqeg Sheet thickness: 0.6 - 2.0 mm Tube diameter: 80 - 600 mm Tube length: 100 - 1250 mm

Stanje: kot nova (razstavni stroj), FRONIUS MAGICWAVE 5000 AC DC Obseg dobave: ➤ Fronius MagicWave 5000 (500A) ➤ Fronius FK 4000 vodno hlajenje Gjdpfxsxhd Tuo Afqjbg ➤ Fronius TIG ročna varilna gorilka ➤ Voziček Fronius ➤ Kabel za maso 3–4 m ➤ Reduktor tlaka

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1998, MIG-MAG welding system Gedpfxowx Hz Es Afqjbg Adjustable welding current: 50 - 400 A Max. welding current at 45/60/100% duty cycle: 400/345/265 A Open-circuit voltage: 16.5 - 45 V Standard wire feed for steel: 1.0 + 1.2 mm Wire feed speed: 1 - 20 m/min Electrical connection: 380 V Weight: 164 kg Space requirement: 950 x 550 x 850 mm