Robusten teleskopski viličar

Merlo TF 42.7 CS-136

Stanje: rabljeno, moč: 100 kW (135,96 KM), Leto izdelave: 2023, obratovalne ure: 142 h, največja hitrost: 40 km/h, Operating hours: 142, First registration: 16/01/2024 Maximum lifting capacity: 4,200 kg Maximum lift height: 7,000 mm Maximum outreach: 3,800 mm Length to carriage: 4,730 mm Width: 2,310 mm Height: 2,530 mm / 2,590 mm (CS activated) Total weight with forks: 8,170 kg Total weight without forks: 8,000 kg Engine: 4-cylinder Perkins 904J, 3.6 l displacement, water-cooled Power: 100 kW (136 hp) at 2,300 rpm Hydraulic reversible fan Emission Stage V Diesel particulate filter, oxidation catalyst and SCR catalyst with AdBlue injection (DPF + DOC + SCR) Hydrostatic drive system Pump: electronically controlled with variable flow rate Motor: variable displacement motor EPD PLUS including optional automatic speed increase Mineral hydraulic oil HVI 46 Kedpfxjpcht Hs Af Todg Transmission: 2-speed, electrohydraulic control Max speed: 1st / 2nd gear = 16 / 20 km/h, optional 40 km/h Cab: fully enclosed, split door, 360-degree visibility GRAMMER air-suspended seat with lap belt, ROPS/FOPS certified Heating Front, roof, and rear wipers Sun blind 4x1 electronic joystick with capacitive release including direction selector CS = hydropneumatic cab suspension Telescopic boom: 2-part with electronic end position damping (Soft Stop) Quick-attach tool carrier system Type “ZM2”, hydraulically operated from the cab Steering: hydraulic 3 steering modes: all-wheel, front-wheel, crab steering Drive: permanent all-wheel drive Axles: front fixed, rear oscillating Brake system: power-assisted disc brakes on all four drive shafts, automatic parking brake when engine is off Chassis: high-strength steel construction Hydraulics: variable-output pump “LOAD SENSING”, work hydraulics flow 151 l/min, fan hydraulics flow 46 l/min, total 197 l/min, working pressure 250 bar, Flow-sharing control block Electrics: 12 V, 100 Ah battery, 120 A alternator Stability control: simplified Merlo ASCS system (ASCS-light) with fully electronic stability control, audiovisual alert, attachment recognition, and overload cut-off Tyres: 460/70 R 24 Standard equipment: - Power-assisted brakes - Hydraulic oil cooler - Rear plate for trailer hitch installation - Hydraulic reversible fan - Radio preparation - Working lights on cab (2 front, 2 rear) - Boom head auxiliary circuit preparation - 2 hydraulic connections at boom head - Load protection grille at tool carrier - Road lighting - Automatic battery main switch - Electrical cable in boom - Acoustic reverse travel signal - Lift cylinder support for safety Special equipment: - EU road registration as tractor/towing vehicle 40 km/h incl. automatic trailer coupling, 30/32 mm pin, incl. trailer lighting connector - Air conditioning - Boom suspension (B.S.S.) - LED work lights on cab (2 front, 2 rear), 2 work lights at end of first boom section - ASCS upgrade: screen with all ASCS functions + data

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2012, obratovalne ure: 7.792 h, nosilnost: 4.000 kg, dvižna višina: 5.650 mm, težišče tovora: 500 mm, vrsta goriva: plin, Certificirano po DGUV do: 11/2025, dolžina vilic: 1.600 mm, stanje pnevmatik: 95 odstotek, lastna masa: 7.183 kg, barva: rumena, We are offering an absolutely top-class forklift from Jungheinrich. In 2021, it underwent a full 5-star refurbishment by Jungheinrich and has only run 45 hours since the overhaul. The paintwork is original and has not been resprayed or touched up! The forklift has always been kept indoors and is in excellent condition. Maintenance and safety inspection (UVV) are up to date. The manual and keys are of course included. The last major service was in October 2024 UVV valid until 10/2025 Operating hours: 7,792 (77,44 since refurbishment) Model: TFG 540s SP G+E 120-565 DZ Type: LPG forklift Year of manufacture: 2012 / 5-star overhaul in 03/2021, complete with Kaup fork positioner T466 Load capacity: 4,000 kg Lift height: 5,650 mm Overall height: 2,640 mm Fork length: 1,600 mm Load centre: 500 mm Mast: Triplex with full free lift Equipment: Solo-Pilot control, road approval lighting (StVZO), LED configuration with two work lights front and rear, front, cab roof, and rear windows Steel doors, leather seat, rear-view mirror, armrest, additional hydraulics with 2 functions Kaup fork positioner NEW 4.8T 466B Kdodpfx Afjw N Iz Hs Tjg Since its overhaul, the machine has only operated for 45 hours. All safety inspections and maintenance have been carried out.

Stanje: novo, With the Brugger Power Split S22, we present a powerful vertical log splitter that impresses with a splitting force of 22 tons. Kdjdpfx Afotpxgtj Tjg This robust machine is ideally suited for a wide range of applications and offers maximum flexibility in terms of drive – whether via electric motor or PTO. The splitting process features two speed settings, allowing for fast and efficient wood processing. Key features: - 22-ton splitting force - Combination drive: 5kW electric motor & PTO drive - Weight: 335kg - Up to 110cm log length - Log lifter - Two speeds A log lifter is included in the scope of delivery, making it easier to handle heavy logs. A hydraulic cable winch is optionally available, providing additional application possibilities and further simplifying work. With a maximum splitting length of 110 cm, the Brugger Power Split S22 offers the flexibility to easily process even larger pieces of wood. A support table for shorter pieces is also included. The Brugger Power Split S22 is the ideal choice for anyone looking for a reliable and powerful solution for splitting wood – whether for professional or private use. Pricing: Power Split S22 = €2,670 Support table for short wood = €125 4-way splitting wedge = €99 Hydraulic cable winch = €595 Contact us for your customized offer!

Stanje: novo, Leto izdelave: 2024, nosilnost: 2.500 kg, dvižna višina: 5.850 mm, skupna dolžina: 5.200 mm, · Maximum lateral reach: 3.30 m · Reach at maximum lift height: 0.50 m · Breakout force with bucket: 4205 daN · Front overhang: 0.99 m · Dump angle: 117° · Tilt-back angle: 12° · Turning radius (over tyres): 3.31 m · Drive wheels (front / rear): 2 / 2 · Steering wheels (front / rear): 2 / 2 · Lifting time: 7.30 s · Lowering time: 4.95 s Kjdpfoxd Hwnox Af Tsdg · Telescope extension: 5.20 s · Telescope retraction: 3.70 s · Tilt-in time: 3.20 s · Dump-out time: 3.20 s · Engine: Kubota, emission standard Stage V · Engine model: V3307-CR-T-E5B · Number of cylinders - cylinder capacity: 4 - 3331 cm³ · Rated engine power: 75 HP / 55.40 kW · Max. torque / engine speed: 265 Nm @ 1400 rpm · Tractive force: 3240 daN · Standard reversible fan · Engine cooling system: 2 water coolers + hydraulic oil cooler · Transmission type: hydrostatic · Number of gears (forward / reverse): 2 / 2 · Max. travel speed (may vary according to regulations): 25 km/h · Differential lock: locking differential on front axle · Parking brake: automatic negative parking brake · Service brake: oil-immersed multi-disc brakes on front axles · Pump type: gear pump · Hydraulic flow / pressure: 86 l/min – 235 bar · Fuel tank capacity: 63 l · Noise level (LpA) according to NF EN 12053: 76 dB · Environmental noise (LwA): 104 dB · Hand/arm vibration exposure: < 2.50 m/s² · Safety cab approval: ROPS - FOPS Level 1 cab · Controls: JSM

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2024, nosilnost: 2.600 kg, dvižna višina: 5.730 mm, vrsta goriva: dizel, tip droga: simpleks, vrsta pogona: Diesel, Rigid telehandler Mast type: Standard Condition: New machine Kodpjw Eqctofx Af Tedg Technical condition: New Front tyres type: Pneumatic Front tyres condition: 80–100% Rear tyres type: Pneumatic Rear tyres condition: 80–100% Description: MINI AGRI 26.6 STAGE V, TÜV/DEKRA approval for 20 KM/H, standard steering axles, hydraulic single-lever control unit with proportional and simultaneous control (flow-sharing). Closed-center system including pressure relief kit for hydraulic couplings. Compatible with lifting equipment with winches. (Joystick with dead-man sensor). Air-suspended seat. Air conditioning. Wheelset #12.0/75-18 with mudguards. EURO carrier plate with quick-change system for attachments, with hydraulic control from the cab. Steering control indicator lamp. Radio prep kit with speakers and antenna. Work lights on cab. Two rear swiveling LED work lights on cab. Additional external glove box. Boom suspension damping. 3rd valve, 4th valve, rear work lights, front work lights, heater, full cab, CE certificate, with Weidemann coupling.

Stanje: novo, Bernardo Universal Lathe Titan 660 x 2000 Technical Specifications Centre distance: 2,000 mm Centre height: 330 mm Swing diameter over bed: 660 mm Swing diameter over gap: 900 mm Swing diameter over cross slide: 460 mm Bed width: 400 mm Spindle bore: 105 mm Spindle mount: DIN 55029, D1-8 Speed range (16): 25 – 1,600 rpm Longitudinal feed range (25): 0.044 – 1.48 mm/rev Cross feed range (25): 0.022 – 0.740 mm/rev Metric threads (54): 0.45 – 120 mm Inch threads (54): 7/16 – 80 TPI Quill diameter: 90 mm Quill travel: 235 mm Quill taper: MT 5 Motor power: 7.5 kW (10.0 HP) Machine dimensions (W x D x H): 3,630 x 1,200 x 1,520 mm Weight: approx. 2,900 kg Features Versatile applications in general engineering, production, single-part manufacturing, etc. Central, easy-to-use control for feeds and threads using leadscrew and feed shaft Prism bed made of cast iron, induction-hardened and precision-ground Modern main spindle bearing with precision angular contact roller bearings Hardened and ground gears and shafts, including in the feed gearbox Rapid traverse for longitudinal and cross feeds as standard to reduce idle times Large spindle bore (105 mm) for workpieces with large diameters Smooth start via mechanical multi-disc clutch Kdjdpfxefbbx Re Af Tjg Electromechanical foot brake for reduced idle times Excellent cutting performance even for facing operations The machine bed is reinforced with sturdy ribs to increase rigidity and minimize vibration influences Scope of delivery 3-axis digital readout ES-12 V with LCD display Slip clutch Rapid traverse longitudinal and cross LED machine light 3-jaw steel chuck PO3-315 mm / D8 Faceplate 450 mm Fixed steady rest – max. dia. 180 mm Travelling steady rest – max. dia. 120 mm 2 centre points Motor with magnetic brake according to CE standards Foot pedal with brake function according to CE Initial fill with Shell Tellus 46 Coolant system Quick-change tool post with 4 holders Protection device for quick-change tool post Change gears Reducing sleeve Chip guard Cable routing via energy chain Operating tools

Stanje: novo, Number of drawers: 9 pcs Dimensions (L x W x H): 1,360 x 460 x 950 mm Net weight: 115 kg Drawer cabinet Drawer 1 dimensions: 1245 x 400 x 100 mm (W x D x H) Drawers 2 to 5 dimensions: 565 x 400 x 60 mm (W x D x H) Ksdpfxsu Imqko Af Tsdg Drawer 6 dimensions: 565 x 400 x 140 mm (W x D x H) Drawers 7 and 8 dimensions: 310 x 370 x 530 mm (W x D x H) Worktop thickness: 40 mm External dimensions of stackable boxes: 105 x 135 x 75 mm (W x D x H) External dimensions of waste bin: 255 x 320 x 380 mm (W x D x H)

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, moč: 36,77 kW (49,99 KM), vrsta prenosa: samodejen, vrsta goriva: dizel, barva: rdeča, skupna masa: 3.520 kg, dvižna moč: 1,4 kg/m, dvižna višina: 2.538 mm, velikost pnevmatike: 20,5-70 R16, stanje pnevmatik: 100 odstotek, stanje pogona: 100 odstotek, konfiguracija osi: 2 osi, število sedežev: 1, emisijski razred: Euro 5, širina izkopne žlice: 1.500 mm, Leto izdelave: 2025, gorivo: dizel, nosilnost: 1.400 kg, Oprema: dodatne luči, filter saj, hidravlika, kabina, parkirni grelec, pogon na vsa štiri kolesa, spojka prikolice, standardna žlica, vilice za palete, H&R Loader 3514 – The Powerful Wheel Loader for Versatile Applications Advantages of the H&R 3514 Articulated Loader - Powerful Engine: The Yunnei DEF20CFF4 engine delivers 50 HP for maximum performance with reduced fuel consumption, complying with Euro 5 emission standards. - Easy Operation: The 2-stage torque converter and all-wheel drive ensure easy handling, even when dealing with heavy loads and challenging ground conditions. - Compact Design, High Maneuverability: Despite its own weight and a lifting capacity of 1,400 kg, the H&R Wheel Loader 3514 remains highly maneuverable—ideal for confined construction sites and agricultural applications. - Hydraulic Quick Coupler: The hydraulic quick coupler enables fast and simple switching between various attachments such as the standard bucket or manually adjustable pallet fork. - Expandable Functions: Use the 3rd and 4th hydraulic circuits to operate additional attachments like mowers, bale grabs, snow blades, and more. - Comfortable Cabin for All-Day Work: The H&R Wheel Loader 3514 features a spacious, air-conditioned comfort cabin equipped with an adjustable seat and steering column, diesel heater, and rear-view camera. This ensures you can work longer shifts comfortably and safely. H&R loaders are technically and visually optimized in-house and undergo rigorous inspection. Every machine also receives comprehensive rust protection treatment. Our loaders are CE compliant according to the EU Machinery Directive. A TÜV Süd certificate is available for each machine to obtain an individual operating permit according to §21 StVZO (road registration / operating permit as a self-propelled work machine). Key Features of the H&R 3514 Wheel Loader • Fully equipped • Includes standard bucket (150 cm) and pallet fork • Powerful and robust – suitable for various applications Kdjdpfx Afjrkmfxe Teg • Compact design for excellent maneuverability • Comfort cabin with heating, ventilation, and diesel heater • Joystick with electronic gear shift for precise control • Additional 3rd and 4th hydraulic circuits for attachments • LED work lights and windshield wipers for clear visibility in any weather • Rear-view camera with display • MP3 radio and USB port for entertainment during work • Ball hitch with socket for additional trailer use • 220V coolant pre-heating for reliable cold starts • Hour meter to monitor operating hours and maintenance intervals • CE compliant according to EU Machinery Directive • Extensively optimized in Germany • 1-year spare parts warranty Price Net: €22,530.00 VAT: €4,280.70 Gross: €26,810.70 Financing Available! Optional Road registration / operating permit: €480 Extended warranty (2 years): €590 Transport within Germany and Austria: On request Technical Details Engine: 4-cylinder Yunnei Engine output: 50 HP Emission class: Euro 5 Lifting height: 2,538 mm (bottom edge, standard pallet fork) Dumping height: 1,950 mm (standard bucket dumped) Lifting capacity: 1,400 kg Wheelbase: 2,200 mm Tires: 20.5-70 R16 Dimensions: 3,870 x 1,750 x 2,570 mm Weight: 3,520 kg Accessories and spare parts are available from us. Please include your telephone number in all inquiries!

Stanje: novo, €1,690 + 22% Italian VAT. A net invoice will be issued for customers with a valid VAT identification number. ----- The Brugger Power Split S14 is a powerful vertical log splitter offering an impressive splitting force of 14 tons. This robust machine is ideally suited for a wide range of applications and offers maximum flexibility in drive options – either via the 3.7 kW electric motor or PTO shaft. Key Features: - 14-ton splitting force - Combination drive: 3.7 kW electric motor & PTO drive - Weight: 250 kg - Split length up to 110 cm - Log lifter The delivery includes a log lifter which facilitates handling of heavy timber. Optionally, a hydraulic winch is available, providing added versatility and simplifying operation even further. With a maximum split length of 110 cm, the Brugger Power Split S14 offers the flexibility to process even larger logs with ease. A support table for shorter wood is also included. The Brugger Power Split S14 is the ideal choice for anyone seeking a reliable and high-performance wood splitting solution – whether for professional or private use. Prices + VAT: - Power Split S14 = €1,690 Ksdpfx Asxn Iq Rjf Tsdg - Power Split S22 = €2,670 - Power Split S30 = €2,960 Accessories: - Support table for short logs = €125 - 4-way splitting wedge = €99 - Hydraulic winch = €595 ----- Contact us for your customised offer!

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2021, obratovalne ure: 116 h, nosilnost: 4.000 kg, dvižna višina: 17.000 mm, vrsta goriva: dizel, tip droga: teleskopski, moč: 85 kW (115,57 KM), lastna masa: 13.040 kg, vrsta pogona: Diesel, Rigid telehandler Mast type: Telescopic Speed class: 20 Technical condition: New Front tires type: Pneumatic Front tires size: 400/70-24 Front tires condition: 80 - 100% Rear tires type: Pneumatic Rear tires size: 400/70-24 Rear tires condition: 80 - 100% 3rd valve, 4th valve, heating, full cab, CE certificate Kdjdpfx Aov Ezt Def Teg Specifications: - Lifting capacity 4000 kg - Lifting height 16.4 m - Max. gradeability 40% - Unladen weight 13,040 kg - Engine KUBOTA 85.1 kW ( 114 HP ) - Displacement 3,769 cm³ - Emission standard Tier 4f - Steering: front wheel steering, all-wheel steering and crab steering.