Robusten teleskopski viličar

Dieci Icarus 40.17 Vorführgerät

Stanje: novo, Bending capacity: 6.0 mm Working length: 3100 mm Material thickness: 8.0 mm Total power requirement: 11.0 kW Weight approx.: 6.7 t Dimensions (LxWxH): 4,88 x 1,16 x 1,18 m Image similar Bending performance: 8.0 mm » at 3x top roll diameter. Pre-bending: 6.0 mm » at 1.5x top roll diameter. Top roll diameter: 230 mm Lower roll diameter: 210 mm Side roll diameter: 190 mm Max. opening: 30 mm Working height: 825 mm • Fully hydraulic drive of the top and bottom rolls via planetary gearboxes • Digital display for side roll positions • Hydraulic drop-end bearing • Cone bending device • Hardened rolls • Hydraulic adjustment of the side rolls, synchronized via PLC • Hydraulic adjustment of the lower roll via torsion shaft • Pressure-adjustable lower roll • Electric and hydraulic overload protection • Movable control panel • Operating manual in GERMAN and ENGLISH • Machine and equipment in compliance with CE regulations Catalog, see the following link: Important points for cone rolling: • The max. sheet thickness is 50% of the nominal capacity Pgsdsd Ab H Hepfx Adysg • Cone length must be a max. of 30% or more than 60% of the roll length • Hardened rolls are recommended

Stanje: novo, Leto izdelave: 2025, Unladen weight: 2,500 kg Overall condition: very good Pedpfsq Ixukex Adyegg Technical condition: very good Visual condition: very good Reference number: 3 Suitable for the following machines: 18-35 tons Delivery terms: EXW Country of origin: KR Please contact Mr. Ö. Inalkac for further information.

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2024, nosilnost: 2.600 kg, dvižna višina: 5.730 mm, vrsta goriva: dizel, tip droga: simpleks, vrsta pogona: Diesel, Rigid telehandler Mast type: Standard Condition: New machine Technical condition: New Front tyres type: Pneumatic Pjdpsw Eqctjfx Adyjgg Front tyres condition: 80–100% Rear tyres type: Pneumatic Rear tyres condition: 80–100% Description: MINI AGRI 26.6 STAGE V, TÜV/DEKRA approval for 20 KM/H, standard steering axles, hydraulic single-lever control unit with proportional and simultaneous control (flow-sharing). Closed-center system including pressure relief kit for hydraulic couplings. Compatible with lifting equipment with winches. (Joystick with dead-man sensor). Air-suspended seat. Air conditioning. Wheelset #12.0/75-18 with mudguards. EURO carrier plate with quick-change system for attachments, with hydraulic control from the cab. Steering control indicator lamp. Radio prep kit with speakers and antenna. Work lights on cab. Two rear swiveling LED work lights on cab. Additional external glove box. Boom suspension damping. 3rd valve, 4th valve, rear work lights, front work lights, heater, full cab, CE certificate, with Weidemann coupling.

Stanje: rabljeno, barva: drugo, dvižna višina: 10 mm, konfiguracija osi: 4x4, Leto izdelave: 2017, obratovalne ure: 1.733 h, Oprema: pogon na vsa štiri kolesa, CE-markering: ja Serienummer: JCB5RA7GEH2572450 Machines te koop! Bekijk onze website voor een breed scala aan direct beschikbare machines. Wij hebben meer opties dan online zichtbaar, dus neem gerust telefonisch of per e-mail contact met ons op. Al onze machines zijn volledig onderhouden en gecontroleerd op betrouwbaarheid. Foto's nodig? Neem contact met ons op, dan sturen wij ze u direct toe. Pgsdpfx Adoth N Nijyjg Wij staan klaar om u te helpen in het Nederlands, Engels, Frans, Duits, Spaans en Russisch. Ontdek ons uitgebreide assortiment betrouwbare machines.

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2024, obratovalne ure: 43 h, nosilnost: 3.200 kg, dvižna višina: 10.000 mm, vrsta goriva: dizel, tip droga: teleskopski, moč: 79 kW (107,41 KM), lastna masa: 7.330 kg, vrsta pogona: Diesel, Rigid Telehandler Mast type: Telescopic Speed class: 40 Condition: New machine Technical condition: New Front tyres: Pneumatic Front tyre size: 400/70-24 Front tyre condition: 80 - 100% Rear tyres: Pneumatic Rear tyre size: 400/70-24 Rear tyre condition: 80 - 100% Description: Hydraulic adapter to Manitou 2550 3rd hydraulic function, 4th hydraulic function, rear work lights, front work lights, heater, full cabin, air conditioning, CE certificate, exterior mirrors, joystick, rotating beacon, windscreen wiper, LED lighting Specifications: - Homologated as a tractor unit with possible trailer use - 20.0 t towing capacity, 7-pin trailer socket - Fixed Dieci implement carrier plate with hydraulically operated double quick coupler from the cab for attachments including hydraulic coupling (mandatory for forks with adapter plate for quick change system usage) - Hydraulic single-lever control unit with proportional simultaneous control (flow sharing) Pgedpfxsw Eqddo Adyog - Closed-center system including pressure relief kit - Lifting capacity: 3,200 kg - Lift height: 8.65 m - Engine: KUBOTA 79.5 kW (107 hp) - Displacement: 3769 cm³ - Emissions standard: Tier 4f - Steering: Four-wheel steering / crab steering / front-wheel steering - Rear hydraulics - 40 km/h top speed - Air-suspended seat - Carrier plate with hydraulically operated quick coupler - Steering indicator light

Leto izdelave: 2009, obratovalne ure: 11.300 h, Stanje: rabljeno, Intended use: Construction Contact Mohamad Fattah Ahmad for further information. Prepared for grab and piping system MAN engine LD 2842 LE 103 with 670 kW 2x 30-ton winches with 36 mm wire ropes 25-ton single hook Pgsdpfx Aeh Ty Arsdyeg Base boom, mast: 2x 6 m + mast head

Stanje: novo, CENA: 2.000 EUR Mlin za meso Proizvajalec: Ital Form Popolnoma izdelan iz nerjavečega jekla Pgsdsx Dcd Dspfx Adyeg Dimenzije: 980x605x900 mm Kapaciteta: 320 kg/h Napetost: 220V / 50Hz Moč: 2,2 kW

Stanje: zelo dobro (rabljeno), DOUBLE-SIDED LOADING STATION Vacuum system (with pump) No. 2 vertical support columns for the upper support beam Pgodpfx Aefi Tg Hedyog No. 1 upper horizontal support beam (on which the carriage slides) No. 1 motorized carriage with horizontal metal arms External roller conveyor (on the floor) for loading the stack of panels onto the loading station External motorized roller conveyor (for receiving panels from the loading station) Separate electrical control panel Perimeter safety fencing with safety mats Working capacity (cycles/min) approx. 16 Panel thickness (min/max) mm 10 / 50 (approx.) Min. panel dimensions mm 250 x 320 (approx.) Max. panel dimensions mm 1300 x 3000 (approx.) Total connected load kW 30

Stanje: dober (rabljeno), Diamond core drilling machine Psdpfx Adjb A H U Asyogg - Drill stand - Vacuum pump - Water pump tank - Core bits: Ø 15/20/3x 25/3x 28/32/40 mm

Stanje: dober (rabljeno), Leto izdelave: 2019, obratovalne ure: 840 h, dvižna višina: 15.700 mm, vrsta goriva: dizel, barva: bela, General Information Odometer reading: 10,740 km Weights Unladen weight: 3,500 kg Performance Lifting capacity: 300 kg Working height: 1,770 cm Working width: 230 cm CE marking: yes Maintenance, History and Condition Number of owners: 1 Technical condition: good Visual condition: good Additional Information Terms of delivery: EXW Max. horizontal reach: 1,100 m Max. boom angle: 140° Max. platform slewing range: 450° Transport dimensions (L x W x H): 6.23 x 2.27 x 2.99 m Last inspection: 2025-10-22 Further Information Please contact Rothlehner Arbeitsbühnen GmbH for more information. Mounted on Nissan Cabstar 35.13 EU6 Mileage: 10,730 km Operating hours: 840 Working height: approx. 17.70 m Pjdpfxjxqzw Aj Adyegg Platform capacity: 300 kg / 2 persons Slewing range: 450° Side reach: approx. 11.00 m / 80 kg Total weight: 3,500 kg Passage width: approx. 2.27 m Passage height: approx. 2.99 m Overall length: approx. 6.23 m Platform constructed from aluminum checker plate Internal energy guide Internal telescopic cylinder Electro-hydraulic proportional control Drive via vehicle hydraulic pump Start-stop diesel engine from the working basket Telescopic boom in steel Load moment limitation Rotatable aluminum work basket, 2 x 70°, Dimensions: 0.70 x 1.40 x 1.10 m Rapid, vehicle-width hydraulic outriggers Vertical stabilizers front and rear Support plates with holders Driver’s cab collision protection Hour meter Mounted on carrier vehicle Rotating beacons, yellow, 2 units, on driver’s cab Flashing beacon yellow under working basket Tool tray in the work basket Aluminum side panels, 100 mm, all round, fixed Stainless steel toolbox, Size: approx. 650 x 650 x 1200 mm Hinged lid with gas strut, opens upwards, lockable Mounted at rear right of platform The unit will be technically overhauled, is fully operational, and will have its TÜV certification and safety inspection renewed. All documentation is available. Service and spare parts supply are guaranteed. Why do we not quote prices? Our pricing is partially dependent on the customer's requirements regarding the desired level of optical and technical refurbishment, or on possible special equipment. Many customers prefer these individual customization options. All questions will be gladly answered in a personal consultation. Please include your telephone number with your inquiry, so that our staff can provide expert advice.