TIG varilni aparat za enosmerni in izmenični tok

Merkle Insquare 300 AC/DC

MERKLE Insquare W 300 AC/DC Welding Machine
with original hose package

Primary:
Voltage: 3 x 400 V
Frequency: 50 (60) Hz
Power factor (cos phi): 0.95

TIG DC Range:
Open circuit voltage: 80 V
Working voltage: 10-22.8 V
Welding current: 5-320 A
Duty cycle at 60% ED (10 min.): 320 A
Duty cycle at 80% ED (10 min.): 300 A
Duty cycle at 100% ED: 260 A (40°C)
Primary continuous power: 9.5 kVA
Primary continuous current: 13.7 A
Primary max. current: 19 A

TIG AC Range:
Open circuit voltage: 80 V
Working voltage: 10-22.8 V
Welding current: 5-320 A
Duty cycle at 60% ED (10 min.): 320 A
Duty cycle at 80% ED (10 min.): 300 A
Duty cycle at 100% ED: 260 A (40°C)
Primary continuous power: 9.5 kVA
Primary continuous current: 13.7 A
Primary max. current: 19 A

Stick Electrode Operation:
Rod electrodes: 1.5-6 mm
Open circuit voltage: 80 V
Working voltage: 20-32.8 V
Welding current: 5-320 A
Duty cycle at 60% ED (10 min.): 320 A
Duty cycle at 80% ED (10 min.): 300 A
Duty cycle at 100% ED: 260 A (40°C)
Primary continuous power: 13.1 kVA
Primary continuous current: 19 A
Primary max. current: 22 A

Welding Processes: 10-position rotary switch:
TIG DC Negative, TIG DC Positive,
TIG DC Negative with ignition pulse,
TIG AC low-noise,
TIG AC square wave
TIG AC "Balanced TIG",
Electrode Negative
Electrode Positive
Electrode "Sine"
Electrode Square Wave

Selector Switch 1: 10-position rotary switch:
Current 1, Time 1,
Up/down slope,
Start current, End current,
Hfodpfel Sm Hbjx Afwef
Ignition pulse, Spot time,
Pre-gas and post-gas flow time

Selector Switch 2: 9-position rotary switch:
Current 2, Time 2 (for pulsed operation),
AC Balance, AC Frequency,
Hotstart time and current,
Post current adjustment,
Electrode diameter, Voltage display

Settings: 2 rotary encoders for selector switches 1 and 2
Displays: 2 LED displays with pre-read and hold function for current, voltage, time, frequency

Time Functions: 4-position rotary switch:
OFF, Pulse slow,
Pulse fast, Spot welding

Ignition: 4-position switch:
OFF, High frequency,
Lift-Tig

Energy Control: 4-position switch:
at unit,
Hand or foot remote control,
Torch

Operating Mode: 4-position switch:
2-stroke, 4-stroke, 4-stroke with 2 currents, Gas test, Test, Program

Program memory: 20 freely assignable memory slots

AC Frequency: 50-200 Hz
AC Balance: 9-91 %
Pre-gas flow time: 0-3 s

Post-gas flow time: 0-25 s
Current up-slope time: 0-2 s
Current down-slope time: 0-20 s
Ignition pulse: 0-100 ms
Spot time: 0.1-2.5 s
Pulse slow: 10 ms-2.5 s
Pulse fast: 50 Hz-5 kHz
Hotstart time: 0-1.5 s
Hotstart current: 10-200 %
Current post-regulation: 100-250 %
Button: Test safety device
Button: Program selection
LED: Power ON, Overtemperature,
Fault, Protective circuit,
Display hold, Start current
Up-slope, Current 1, Current 2,
Down-slope, End current
Power source: IGBT inverter
Ignition: High frequency or Lift-Tig
Standard: EN 60974-1 "S" / CE
Torch connection: EURO central connector
with 5-pin plug
Torch cooling: Water-circulation cooling unit
Socket 50 mm²: Workpiece cable
Socket 50 mm²: Electrode welding cable
Power supply connection: 4 x 4 mm², 5 m long
Gas connection hose: 2 m

Weight: 130 kg (300 AC/DC)
Dimensions (L x W x H): 910 x 600 x 910 mm with cylinder holder
Gas cylinder holder: suitable for 10 - 20 - 50 l gas cylinders

Financing through our bank is also available.
komplett-konzept.leasingo.de

Further articles – new and used – can be found in our shop!
International shipping costs on request!

Oglas je bil avtomatsko preveden. Možne so napake pri prevodu.