Kombi z visokim stropom

MERCEDES-BENZ Sprinter 315 CDI Maxi L3H2 Klima AHK 2,8t

Stanje: rabljeno, prevoženi kilometri: 170.000 km, moč: 110 kW (149,56 KM), prva registracija: 06/2022, vrsta goriva: dizel, skupna masa: 3.500 kg, barva: bela, vrsta prenosa: mehanski, emisijski razred: Euro 6, število sedežev: 3, Leto izdelave: 2022, Oprema: ABS, elektronski program stabilnosti (ESP), filter saj, klimatska naprava, Special equipment: - Overhead storage compartment in cab headliner - 13-pin trailer socket - DAB tuner (digital radio reception) - Roof-mounted load compartment light with door contact - Entry handle on rear right C-pillar - Tachograph control unit front under headliner - Digital tachograph - Vehicle without lowering suspension - Alternator 250 A - Rear doors (opening angle 270 degrees) - Wooden floor in load compartment - Terminal strip for electrical connections (under driver's seat) - Fuel tank: main tank 93 litres - Instrument panel charging package (extra USB ports and additional 12V socket) - LED cargo area lighting - Cable duct at rear portal - Cable duct at side wall Knedpfxsxpy U Ro Ah Ajf - MBUX multimedia system (7" touchscreen) - Park package with reversing camera - Crossmember with integrated step - Smoker package - Spare wheel with operational tires - Spare wheel carrier under rear frame incl. jack - Seats in cab: dual passenger seat - Seats in cab: driver’s seat with lumbar support - Seats in cab: comfort suspension seat, driver side - Seats in cab: low-profile driver’s seat box - High wooden lining in cargo/body area (up to roof) - Lashing rails in load compartment – sidewall at belt rail - Reinforced front axle - Jack - Heat-insulating glazing (windscreen with top filter strip) Further equipment: - Third brake light - Overhead storage compartment above windscreen - Lower glove compartment (passenger side) - Adaptive brake light - Driver's airbag - Hill-start assist - Traction control system (ASR) - Washer fluid level indicator - Electrically adjustable and heated exterior mirrors, both sides - Outside temperature display - Brake assist - Automatic headlight activation - Entry handle for sliding door on cargo partition wall - Electronic brakeforce distribution (EBD) - Driver assistance system: breakdown management - Driver assistance system: crosswind assist - Chassis: stabilization level I - Exterior noise reduction measures - Body/chassis: high-roof panel van (standard) - Keyless start - Child safety lock - Communication module (LTE) for digital services - Full partition wall for cargo area - Steering wheel (mechanically adjustable column) - Headlight range adjustment - Truck registration - Side marker lights - Mercedes-Benz emergency call system - Engine: 2.0 L - 110 kW CDI CAT - Wheelbase 4325 mm - Low-emission as per Euro 6d standard - Sliding door, right, to cargo/passenger area - Seat belt system with warning device (passenger side) - Seat belt system with warning device (driver side) - Upholstery: Fabric - Steel wheels 6.5x16 - Engine start/stop system - Fleece battery 92 Ah - Service interval indicator, Assyst - Permissible gross weight 3.50 t Subject to prior sale, errors, and changes.

Stanje: novo, Dimensions (L x W x H): 960 x 460 x 860 mm Weight: 75 kg Number of drawers: 8 pcs. Tool trolley with 8 drawers, all fully equipped with tools. - The extendable drawers are all ball-bearing mounted. - The entire workshop trolley is lockable. - The workshop trolley is equipped with 4 robust wheels, 2 of which are swivel and lockable. - The included tools are made of chrome vanadium steel. - The workshop trolley features 4 robust wheels, 2 swivel and 2 lockable, providing very smooth maneuverability. On top of the tool trolley is a sturdy worktop made from polypropylene plastic. - The tools in the workshop trolley are stored in foam/styrofoam inserts and are made of chrome vanadium steel. Drawer 1: - 1/4" drive: 13 sockets from 4mm to 14mm, 11 deep sockets 4mm – 13mm Ratchet, universal joint, extension bar. - 3/8" drive: 10 sockets from 10mm to 19mm, 11 deep sockets from 6mm to 19mm Ratchet, universal joint, extension bar. - 1/2" drive: 17 sockets from 8mm to 32mm, 9 deep sockets from 10mm to 22mm Ratchet, universal joint, extension bar. Drawer 2: - 1/4" drive ratchet accessories: Torx sockets without hole: T8, T9, T10, T15, T20, T25, T27, T30, T40 Torx sockets with hole: TT8, TT9, TT10, TT15, TT20, TT25, TT27, TT30, TT40. Hex sockets: H3 to H8 Slotted sockets: SL4 to SL7 Pozidriv sockets: PZ0 to PZ3, Phillips: PH0 to PH3 Spline sockets: M8, M10, M12 Five-point star sockets: TS10, TS15, TS20, TS25, TS27, TS30, TS40, TS45, TS50 - 3/8" drive ratchet accessories: Bit adapter Torx sockets without hole: T40, T45, T50, T55, T60, T70 Torx sockets with hole: TT40, TT45, TT50, TT55, TT60, TT70 Hex sockets: H7, H8, H10, H12, H14 Slotted sockets: SL8, SL10, SL12 Pozidriv sockets: PZ3, PZ4, Phillips: PH4, PH8 - 1/2" drive ratchet accessories: Hex sockets: H14, H17, H19, H22, H24 Hex sockets: H5, H10, H11, H13 Torx: T40, T45, T50, T55, T60, T70, T80 Ribe: R9, R10, Spline: M16 Spline: M9, M10, M12, M14, M16, M18 Short, medium, and long adapters Torx: T30, T45, T50, Hex: H7 Drawer 3: - Ratcheting combination spanners: 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 19, 22 mm - Double ring spanner set 8 pcs: 6-7mm, 8-9mm, 10-11mm, 12-13mm, 14-15mm, 16-17mm, 18-19mm, 20-22mm - Torque wrench Drawer 4: Kodpfsu Impyox Ah Aonf - Precision screwdrivers: Slotted: SL3.0 x 100mm, Phillips: PH0 x 100mm - Screwdrivers with soft grip and external hex: Slotted: SL6 x 38mm; SL5 x 75mm; SL6 x 100mm; SL8 x 150mm Phillips: PH2 x 38mm; PH1 x 75mm; PH2 x 100mm; PH3 x 150mm - Torx screwdrivers: T6 x 80; T7 x 80; T8 x 80; T9 x 80; T10 x 80; T15 x 100; T20 x 100; T25 x 100; T27 x 100; T30 x 100; T40 x 150 Drawer 5: - T-handle hex/Allen key set with ball end: 3 x 115mm; 4 x 120mm; 5 x 140mm; 6 x 160mm; 7 x 170mm; 8 x 175mm; 10 x 200mm - T-handle TORX: T10 – T40 Drawer 6: - Internal/external circlip plier set, 4 pcs, 2 bent, 2 straight - Plier set: combination pliers, side cutters, straight long nose pliers, bent long nose pliers, pipe wrench - Claw hammer Drawer 7: - Nut driver set: 6, 7, 8, 10, 11, 12, 13, 14 mm Drawer 8: - Bodywork tools

Stanje: novo, Dimensions (L x W x H): 1045 x 5050 x 1010 mm Weight: 100 kg Number of drawers: 7 pcs. Workshop trolley equipped with 274 quality tools. Features 7 drawers and 1 door. Fixed ball bearing slides (double bearings), anti-slip mat in each compartment, Thick rubber top mat, central locking system, 4 heavy-duty wheels (125 x 50 mm), of which 2 are swivel casters with brakes, 2 keys included. Kjdpfxju Impae Ah Asnf

Stanje: novo, Saw blade diameter: 210 mm Cutting height: 70 x 305 mm Knsdpfsu Imnijx Ah Ajf Cutting height at 45°: 35 x 305 mm Saw blade speed: 4500 rpm Motor power: 1.5 kW Machine weight: approx. 9 kg Dimensions (L x W x H): 340 x 500 x 740 mm Sliding compound mitre saw The machine is equipped with numerous adjustment options and tools to support and secure the workpiece being cut. A line laser indicates where the cut will take place. The blade guard is automatically retracted. Delivery includes: Saw blade (pre-installed) 6 mm Allen key Dust bag 2x side supports

Stanje: novo, Dimensions (L-W-H): 745 x 525 x 915 mm Weight: 93.5 kg Number of drawers: 7 Workshop trolley filled with 283 quality tools. Solid ball bearing slides (double bearings), anti-slip mat in each compartment, thick rubber top mat, central locking system, 4 heavy-duty wheels (125 x 50 mm), including 2 swivel castors with brakes, 2 keys. The tool trolley is equipped with 283 tool pieces, including: 3 socket sets: 1/4" from 4 - 14 mm, 3/8" from 9 - 22 mm and Torx from E8 - E20, 1/2" from 8 - 32 mm. 3 sets of ratcheting ring spanners from 8 - 19 mm, ring spanner set from 6 - 32 mm. Various screwdriver sets, bit sets for socket sets, Knedpfou Imk Dsx Ah Asf various hex keys and much more. See pictures.

Stanje: novo, Dimensions (L x W x H): 790 x 460 x 960 mm Weight: 70 kg Number of drawers: 7 units Tool trolley with 7 drawers, equipped with tools - All extendable drawers are ball bearing mounted. - The entire workshop trolley is lockable. - Drawer 1: 1/4" premium ratchet 1/4" universal joint, 45 mm 1/4" extension, 100 mm 1/4" sockets: 4, 4.5, 5.5, 6, 7, 8, 9, 10, 11, 12, 13, 14 mm 1/4" deep sockets: 4, 5, 6, 7, 8, 9, 10, 11, 12, 13 mm 3/8" premium ratchet 3/8" universal joint, 55 mm 3/8" extension, 150 mm 3/8" sockets: 8, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19 mm 3/8" deep sockets: 10, 11, 12, 13, 14, 15, 17, 19 mm 1/2" premium ratchet 1/2" universal joint, 75 mm 1/2" extension, 125 mm 1/2" sockets: 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 19, 21, 22, 24, 27, 30, 32 mm 1/2" deep sockets: 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 22 mm - Drawer 2: Ring spanner, ratchet, and socket set including sockets: 8, 9, 10, 11, 12, 14, 15, 16, 17, 19, 21, 22, 24, 27, 30 mm Knedpfx Ahsu Imnps Asf - Drawer 3: 1/4" bit holder: TT8, TT9, TT10, TT20, TT25, TT27, TT30, TT40 1/4" insert bits: T8, T9, T10, T15, T20, T25, T27, T30, T40 1/4" insert bits: HW3, HW4, HW5, HW6, HW7, HW8 1/4" bit holders: S0, S1, S2, S3, S4 1/4" bit holders: V6, V8, V10 1/4" bit holder: H6 1/4" insert bits: FD4, FD5.5, FD6, FD7 1/4" insert bits: PH1, PH2, PH3 1/4" insert bits: PZ0, PZ1, PZ2, PZ3 1/4" insert bits: H2, H4, H5 8mm insert bits: PZ1, PZ2, PZ3, PZ4 8mm insert bits: PH1, PH2, PH3, PH4 8mm insert bits: T20, T27, T30, T35, T40, T45 8mm insert bits: SL4, SL5.5, SL6, SL6.5 8mm Allen bits: 7, 8, 10 1/2" bit holder: M18 Spline (POWER) 1/2" insert bits: H14, H17, H19, H22, H24 1/2" bit holder: M16 Spline 1/2" driver: M16 Spline, 100 mm long 1/2" bit holder: T80 – 100 mm long 1/2" pick-up bits: M9, M16 – 100 mm long 1/2" bit holder: R9 – 100 mm long 1/2" pick-up bits: R10 – 140 mm long 1/2" drill bits: T40, T45, T50, T55, T60, T70 – 140 mm long 1/2" drill bits: H10, H11, H13 – 140 mm long 1/2" drill bits: M10, M12, M14 – 140 mm long 1/2" bit holder: H5 – 160 mm long 1/2" pick-up bits: H7 – 230 mm long 1/2" bit holders: R7, R8 – 230 mm long 1/2" bit holder: H7 – 230 mm long 1/2" bit holder: T30 – 300 mm long 1/2" adapter to 10 mm square - Drawer 4: Flat screwdrivers: 2.5x50, 3x75, 5x100, 6x100 Phillips screwdrivers: PH 2.5x50, 4x75, 5x75, 6x100, 8x150 Slotted impact screwdrivers: 5x75, 6x100, 8x150, 6x38 stubby Phillips impact screwdrivers: 5x75, 6x100, 8x150, 6x38 stubby - Drawer 5: T-handle hex keys with ball end: 2x100, 2.5x100, 3x100, 4x150, 4.5x150, 5x150, 6x150, 8x200, 10x200 mm T-handle hex keys: 2x100, 2.5x100, 3x100, 4x150, 4.5x150, 5x150, 6x150, 8x200, 10x200 mm - Drawer 6: Water pump pliers 250 mm Combination pliers 150 mm Long nose pliers 150 mm Bent nose pliers 150 mm Side cutters 150 mm Internal bent circlip pliers 170 mm External bent circlip pliers 170 mm External circlip pliers 180 mm Circlip pliers: 1.5x102, 2x102, 3x114, 4x127, 5x127, 6x140 mm Claw hammer with fiberglass handle - Drawer 7: Box spanner 6 mm Box spanner 7 mm Box spanner 8 mm Box spanner 10 mm Box spanner 11 mm Box spanner 12 mm Box spanner 13 mm Box spanner 14 mm Box spanner 15 mm

Stanje: novo, Dimensions (L x W x H): 780 x 480 x 1050 mm Weight: 79.5 kg Knsdpfx Ahju Imk Rj Aof Number of drawers: 6 pcs. The tool trolley is equipped with 6 storage drawers. Fitted with 2 fixed and 2 swivel castors, one of which has a brake. The tool trolley is fully lockable thanks to an integrated lock. Drawers can be locked individually. All drawers feature a quick-release mechanism and soft-close damping. Height-adjustable storage compartment behind the door. Central locking system with 2 keys. The tool trolley is equipped with 155 pcs. of tools: 3 socket sets: 1/4", 3/8", 1/2". Ratchet combination spanner set from 6 - 22 mm. Extensions for socket sets, various Allen keys from 1 - 10 mm. Various screwdriver sets. Assortment of pliers.

Stanje: nepreverjeno (rabljeno), Funkcionalnost: popolnoma funkcionalen, Wooden crate containing nuts, bolts, screws, and other fasteners. 820 kg (weight excluding wooden crate) Kodpsw Hrw Ijfx Ah Aenf Lot includes the wooden crate.

Stanje: novo, Number of drawers: 10 pcs. Net weight: 162 kg Dimensions (L x W x H): 1200 x 800 x 1050 mm Knjdpfxju Imluo Ah Asf Workshop trolley with 30 mm thick solid wood worktop. Heavy-duty ball-bearing drawers (double bearings). All drawers can be opened 100%. Equipped with a scratch- and impact-resistant powder coating. Each drawer is fitted with a non-slip mat. All drawers are fitted with a drawer lock. Doors feature magnetic closure and lock. Tool trolley is equipped with 10 drawers and a cabinet with 2 doors. 2 x 125 mm heavy-duty swivel castors with brakes. 2 x 125 mm heavy-duty fixed castors. 1 x robust handle made of solid steel. 3 x locks for all drawers and doors.

Stanje: novo, Dimensions (L x W x H): 780 x 480 x 105 mm Weight: 79.5 kg Number of drawers: 7 pcs. Tool trolley with 7 drawers. The tool trolley is equipped with two fixed and two swivel castors with brakes. Fully lockable tool trolley with integrated lock. Ksdju Imigjpfx Ah Ajnf Each drawer can be locked individually. All drawers feature quick-release locks and a soft close mechanism. The tool trolley comes equipped with 245 tool pieces: 3 socket sets: 1/4", 3/8", and 1/2" Various screwdriver sets. Extension bars for socket sets, assorted Allen keys from 1 - 24 mm, various files. Ratchet combination spanner set. Assortment of pliers.