Voziček za orodje

WMT WMT 120/73

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1989, An aluminium die casting system is available. Clamping force: 2200 kN, opening force: 71 kN, max. opening stroke: 430 mm, mold locking system: toggle double-knee lever, shot chamber: cold chamber, orientation: horizontal. Plunger diameter min./max.: 40 mm / 70 mm, shot chamber fill volume min./max.: 293 cm³ / 898 cm³, casting pressure: 1990 bar, projected area min./max.: 110 cm² / 338 cm², capacity: 780 cycles/h. Tie bar distance X/Y: 500 mm / 500 mm, platen dimensions X/Y: 755 mm / 755 mm, mold height min./max.: 250 mm / 600 mm, minimum mold dimensions X/Y: 296 mm / 296 mm. Includes crucible furnace, air blast device, dosing unit and 4x control cabinets. Documentation available. Lhsdpfjucfwpjx Aamoi

Stanje: novo, Leto izdelave: 2025, Dimensions (L/W/H): 720 x 1000 x 1900 mm Lhjdpfovz Hq Hex Aamoi Weight: 300 kg Total power requirement: 1.2 kW Hot Air Furnace MARTINA 55 The MARTINA hot air furnaces are the ideal solution for energy utilization in woodworking industry and trade businesses. They have been developed for heating larger spaces, such as workshops and production halls in craft and industrial facilities. These hot air systems require no long heat-up phases and are capable of quickly warming up carpentry or joinery workshops and other production areas. Fuel types include solid wood and its by-products, e.g. remnants of solid wood panels, chips, sawdust, pellets, or briquettes. The MARTINA hot air furnaces comply with EU Directive 98/37CE, Italian Presidential Decree N°459 dated July 24, 1996, and the safety guidelines of Directive 89/392 CE. All hot air furnaces in the MARTINA series 15 – 30 – 55 – 85 – 120 – 180 – 240 – 350 meet both emission stages stipulated by the 1st German Federal Immission Control Ordinance (1. BImSchV). - Automatic and continuous air operation - Thermal output: 49.9 kW - Thermal output: 43,000 kcal - Fuel consumption: 15 kg/h - Air throughput: 4,900 m³/h - Firebox depth: 650 mm - Loading door: 370 x 350 mm - Hot air fan: 1.12 kW / 230 V - Firebox negative pressure: 0.2–0.3 mbar - Nominal draft requirement: 0.18 mbar - Heatable volume: approx. 1,000 m³ - Heatable surface: approx. 220 m² - Footprint: Width 720 mm, Depth 1,000 mm, Height 1,900 mm - Weight: 300 kg - Flue pipe diameter (connector): 160 mm - Chimney diameter (recommended): 200 mm - Efficiency: 85–90% - Chimney draft: 13 Pa - Flue gas temperature: 290°C - Hot air outlet connections: 2 x Ø 200 mm - For further data, please refer to the attached data sheet. The two air outlet nozzles for the hot air are located at the lower rear of the furnace. A maximum of 20 meters of ducting per outlet is permitted for air distribution.

Stanje: novo, Round material 30 x 1 mm Square material 30 x 30 x 1 mm Solid round material 16 mm Solid square material 30 x 10 mm Rotational speed 9 rpm Total power requirement 1.1 kW Machine weight approx. 0.32 t Space requirement approx. 0.82 x 0.60 x 1.26 m Electric profile bending machine with - 5 sets of rollers 2x for round material 20 mm and 30 mm, 1x for flat material 1x for square material Lhjdpfsh D Svnjx Aamei 1x for ? - Foot switch with emergency stop

Stanje: novo, Leto izdelave: 2024, dolžina gredi pod glavo: 80 mm, dolžina navoja: 55 mm, največja hitrost vožnje: 480 mm/min, Flat Die Thread Rolling Machine E.W. MENN GW63 Fully refurbished to as-new condition. New guides, vibrator, and vibratory discharge system. New electrical system with inverter and PLC. Ljdpot Uucajfx Aamshi Thread size: M8x80/55 mm. Throughput: 480 pcs/min. Threading diameter (min./max.): 3 - 8 mm. Die length: 115/130 mm. Machine available for inspection and testing at HBR srl - Calolziocorte (LC).

Stanje: novo, Leto izdelave: 2024, Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch Technical data for the tier trolley: Manufacturer: LPR Type: 600 01x Tier trolley, new Frame colour: blue / orange Overall height incl. castors: 2,150 mm Overall width: 1,550 mm Overall depth: 600 mm Number of levels: 3 pcs. Consisting of: 02x Upright frames, new Frame colour: blue Lhsdpfxodb N Hms Aamoi Frame profile dimensions: 50 x 50 mm Incl. horizontal and diagonal bracing, metal base plates, plastic end caps Uprights are pre-assembled (bolted lattice construction) 2,000 mm high 600 mm deep 06x Cross beams for workbench, new Beam colour: orange Design: stepped beam Clear span: 1,450 mm Profile dimensions: 80 x 50 mm Compartment load: 300 kg (with evenly distributed load) 12x Safety pins, new For securing the longitudinal beams against unintentional lifting 03x Inlay shelves, second choice, used Thickness: 22 mm Dimensions: 1,430 x 545 mm 02x Double-braked swivel castors, new 02x Swivel castors, new 08x Machine screws: M8 x 20 mm 08x Nuts: M8 08x Washers Images are for material clarification. Actual material colour may vary. - Workbenches are supplied unassembled; - Workbench frames are pre-assembled; - Production time is usually approx. 3 - 5 working days. Our range of services: (prices upon request) - Assembly, installation Please observe our general assembly conditions - Racking inspection Inspection carried out according to DIN EN 15635 and requirements of BGR 234 (visual inspection for all racking systems) - Delivery using our own vehicle fleet (unloading not included)

Stanje: novo, Power: 650 W Tank capacity: 5.5 l Length: 515 mm Width: 430 mm Height: 825 mm Machine weight: approx. 36 kg Professional 650 W construction dryer Recommended room size: 40 - 50 m², max. height 2.6 m Sound pressure level: approx. 52 dB Dehumidification capacity: 28 L/day - 51 L/day Lhodpoqd Rxhsfx Aamei

Stanje: novo, Drilling capacity: 35 mm Max. speed: 810 rpm Max. core drilling diameter: 35 mm Tool holder: Weldon 19.05 mm Drilling stroke: 210 mm Weight: 11 kg Supply voltage: 230 V Motor power: 1.6 kW Dimensions (LxWxH): 0.4 x 0.25 x 0.275 m Magnetic drilling machine equipped with: 2-speed motor Coolant system Robust mobile storage / carrying case Lhedpfeidabvox Aamei MAGNETIC HOLDING FORCE: 1800 kg

Stanje: skoraj kot novo (rabljeno), Rotacijski avtoklav SURDRY 1 B Ljdpfx Aajxp Rqvjmshi

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1951, max. working width: 1,250 mm Lhsdpfx Asv D E R Djamoi for sheets up to: 1.75 mm upper beam opening width: 70 mm adjustable bending beam: 50 mm required space: 1,880 x 740 x 1,140 mm

Stanje: rabljeno, Magnetic drilling machine, hand-held drill - Magnetic base: Magnetor type PS 32 L - Drill unit: AEG type HBE-IV - Shank: Morse taper 2 (MT2) Ledsfc R D Aspfx Aamjhi - Max. drill diameter: Ø 23 mm - Power supply: 265 V / 200 Hz - Dimensions: 700 x 300 x H 670 mm - Weight: 49 kg