Tovornjak za prevoz hlodovine

MERCEDES-BENZ Arocs 2546 BL 6x4HAD Palfinger LK Lenk/Lift

Stanje: rabljeno, Leto izdelave: 2013, Transporter za ostružke, proizvajalec BMF - BÜRENER, s filtrirno napravo in visokotlačno črpalko. Iaodsiicnkspfx Adkep Dimenzije transporterja za ostružke: Širina vratu: 600 mm, višina vratu: 200 mm, dolžina transporterja: 3000 mm.

Stanje: rabljeno, prevoženi kilometri: 840.000 km, moč: 375 kW (509,86 KM), prva registracija: 10/2013, vrsta goriva: dizel, skupna masa: 26.000 kg, konfiguracija osi: 3 osi, zavore: retarder, vrsta prenosa: mehanski, emisijski razred: Euro 5, dolžina tovornega prostora: 6.400 mm, Leto izdelave: 2013, Oprema: ABS, elektronski program stabilnosti (ESP), klimatska naprava, parkirni grelec, žerjav, Special equipment: Front axle load 8.0 t, Trailer coupling: Central axle trailer G 250, Audio system: CD radio comfort (Bluetooth), 220 Ah battery, CB radio, Comfort cockpit, Air horn, Cab: Movable cab entry, Cab: with low roof – 1560 mm, Rear axle H 7, 13 t, Crown wheel 300, Reinforced clutch, Pull-out cool box, Air intake for refrigeration units, Air filter: Construction vehicle filter, Programmable special module, Voith retarder, Protective plate under radiator/engine, Cabin seats: Driver’s seat with comfort suspension and horizontal suspension, Sun visor, Rear axle stabilizer, Stone guard grille, Gearbox oil cooler Isdpfx Aoyhtkdsdkjap Additional equipment: Emission standard EURO 5, Axle configuration: 6x4, Trailer brake 2-line, Trailer socket 24V / 15-pin, Exterior mirrors electrically adjustable and heated, Exterior mirror wide-angle and heated, left, Outside temperature display, Rear axle differential lock, Cab: L (long), Suspension: leaf/leaf, Electric window opener, 80 A alternator, Body/superstructure: chassis, Fuel tank: 300 ltr., Model revision from 06/2008, Engine 16.0 ltr. – 375 kW V8 diesel (OM 502 LA), Engine brake with constant throttle, Wheelbase 4500 mm, Disc brakes, Steel rims 9.00x22.5, Telligent transmission, Telligent braking system with ABS+ASR, Front underrun protection, CB radio preparation, Telephone/fax preparation, Immobilizer, Heat-insulating glazing (windscreen with band filter), Central locking incl. key, Permissible total weight 26.0 t

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2023, laserska moč: 120.000 W, Glavni pogon Moč laserja: 120 kW Tehnične specifikacije Hitrost graviranja: 3000 m/s Ta 3-osni laserski gravirni stroj Trotec Speedy 360 je bil izdelan leta 2023. Opremljen je z CO₂ laserjem z močjo v območju 30–120 W in delovno površino 610 x 305 mm. Stroj zmore obdelovati materiale do debeline 10 mm in je primeren za različne materiale, med drugim les, akril in steklo. Na voljo ima integriran odsesovalni sistem in barvni zaslon na dotik. Če iščete visoko kakovostno graviranje, razmislite o stroju Trotec Speedy 360, ki ga ponujamo v prodaji. Kontaktirajte nas za več informacij. Iedpfxjx I S Nye Adkoap Vrste uporabe Drugi stroji za obdelavo pločevine

Leto izdelave: 2020, stanje: novo, Cantilever rack, double-sided, 3.50m height, 1.20m arms, 750kg per arm – NEW: Price ex location incl. loading! 1 racking unit with 4 uprights €3,210 (net)! Transport price within Germany (excluding islands): €550 (net)! Of course, you can create longer or shorter racking units by omitting or purchasing additional uprights (or by varying the bay distance). This example with 4 uprights is simply the most common configuration! A hot-dip galvanized cantilever racking system consisting of: - 4 double-sided uprights, approx. 3.50m high, hot-dip galvanized - IPE 160/100 - each with 2x3 adjustable arms, 1.20m long, 750kg capacity per arm - with bracing, approx. 1.30m - Uprights double-sided, approx. 3,500mm high, galvanized - Base and arm depth 1,200mm, each with 3 height-adjustable cantilever arms - Load capacity at 600mm load center: 750kg per arm / 2,250kg per upright side - With longitudinal and diagonal bracing, e = 1,300mm, standard is 1.30m. - Other standard bay sizes available from stock: 1.00m / 1.25m / 1.50m / 1.70m / 1.90m! - From 1.50m bay length onwards, a small surcharge applies to the listed price! - Custom sizes (other bay distances) are available on request – these also incur a surcharge and have a longer delivery time as they are made to order! - If no alternative bay distance is specified, we will supply the racking with a standard bay distance of 1.30m. - With 4 uprights (3 bays), the rack length is approx. 4m. - Delivery includes all bolts and nuts (shipping within Germany by parcel directly from Würth), without floor anchors. Iedpfxjfivhge Adkeap Other configurations (frame height, arm lengths, arm types, etc.) available on request! Please contact us!

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2026, The FM300SN is an advanced industrial transport fan designed for the extraction of wood chips, shavings, and dust in industrial conditions. With a 2.2 kW motor and an airflow capacity of 3900 m³/h, this device excels as a sawdust blower in dust extraction systems, providing effective filtration and air purification directly at the source of contamination. Its reliability, high performance, and compatibility with various woodworking machines make it an ideal choice for professional woodworking plants. Iodpsvu Amkjfx Adkoap Key machine features: - 2.2 kW motor – suitable for intensive continuous operation - High extraction capacity of 3900 m³/h – efficient removal of wood chips, shavings, and dust - Impeller speed of 2,850 rpm – optimal airflow with stable operation - Universal suction nozzles – 1×150 mm and 3×100 mm for simultaneous connection of multiple machines - Steel construction – resistant to mechanical damage, designed for industrial environments Design and technology: The FM300SN is built on a welded frame made of thick, powder-coated steel, ensuring resistance to impact, vibration, and heavy-duty use. The aluminum impeller is mounted directly onto the motor shaft, guaranteeing high efficiency and minimal energy loss. The fan is equipped for operation with a three-phase 400 V / 50 Hz supply, ensuring stable use in industrial settings without the risk of circuit overloads. The suction nozzle system—with diameters of 3×100 mm and 1×150 mm—allows for connecting multiple machines simultaneously or adapting the setup using reducers, depending on the requirements of the extraction system. Precision and performance: The FM300SN ensures highly effective transport of wood chips and dust, even under high dust loads. Its carefully selected aerodynamic parameters maintain a constant airflow, eliminating the risk of blockages in the installation. As a result, the sawdust extraction fan not only provides a cleaner working environment but also extends the lifespan of connected machinery by limiting exposure to industrial dust. Application: The FM300SN is suited for all settings requiring efficient extraction of sawdust and shavings during woodworking machine operation. Especially recommended for: - joinery workshops - furniture manufacturing plants - production of panels and solid wood components - central dust extraction systems in production halls Compatible with machines such as: - planers and jointers - thicknessers - spindle moulders - panel saws - edgebanders Standard equipment: - powder-coated steel housing - three-phase 400 V motor - direct-drive aluminum impeller - suction nozzles: 1×150 mm and 3×100 mm Optional equipment: - flexible hoses Ø100 mm, Ø120 mm, and Ø150 mm - filter bags Technical data: Motor power: 2.2 kW Speed: 2950 rpm Extraction capacity: 3900 m³/h Suction nozzle dia: 150 mm / 3×100 mm Outlet nozzle dia: 120 mm Voltage / frequency: 400 V / 50 Hz Dimensions (L×W×H): 440 × 430 × 450 mm Weight: 30 kg

Stanje: pripravljen za uporabo (rabljen), Container size, width x length: 550 x 1000 mm Container depth: 600 mm Capacity approx.: 160 l Entry height: 670 mm Iedpfx Aeixzy Hedkoap Required space: 1150 x 900 x 960 mm

Stanje: rabljeno, prevoženi kilometri: 464.089 km, moč: 375 kW (509,86 KM), prva registracija: 02/2016, vrsta goriva: dizel, skupna masa: 33.000 kg, konfiguracija osi: 3 osi, barva: rdeča, vrsta prenosa: samodejen, emisijski razred: Euro 6, skupna širina: 2.550 mm, skupna višina: 4.000 mm, dolžina tovornega prostora: 6.800 mm, Oprema: ABS, elektronski program stabilnosti (ESP), filter saj, klimatska naprava, navigacijski sistem, parkirni grelec, žerjav, DAF 510 XF prevoznik lesa s zadnjo nakladalno žerjavo Palfinger EPSILON M120Z, 6x4 Vzmetenje: listnato-zračno Medosna razdalja: 4,85 m Nosilnost: 17.350 kg Dolžina nakladalne površine: 6,80 m PALFINGER EPSILON Tip: M120Z79 1x hidravlični izvlek 2x hidravlična podporna mesta 1x grabilnik Oprema: - Avtomatski menjalnik - Motorna zavora - Digitalni tahograf - Klimatska naprava - Ogrevan sedež - 2x ležišča - Hladilna skrinja - Centralno zaklepanje - Sistem za ohranjanje voznega pasu - Radio-CD-Navigacija - Prostoročna oprema - Električni pomik stekel - Drsna steklena streha Iajdpfx Adeumzt Nskep - Senčnik - Vlečna kljuka (priključek za zrak-ABS-elektriko) Z veseljem vas podpiramo tudi na področju financiranja/leasinga s svojimi partnerji. Vse informacije brez garancije. Pridržujemo si pravico do napak in vmesne prodaje.

Leto izdelave: 2025, stanje: kot nova (razstavni stroj), ECOSPIR EV These are highly robust and largely maintenance-free machines that impress not only with their exterior design but also with their sophisticated and well-engineered technology. Isdpfx Ajmt Du Nedkoap Technical data: • Operation via TOUCH SCREEN • Storage of 8 wrapping programs • Turntable diameter: 1650 mm • Continuous load capacity of turntable: 2000 kg • Maximum pallet height: 2200 mm • Connection value: 240 V, 50 Hz, 1 KW • Machine with CE marking Warranty: 24 months (single-shift operation) Optional: Ramp for pallet truck & electric pallet jack (price on request)

Leto izdelave: 2016, stanje: dober (rabljeno), Hethon 51 Hopper und Schneckenförderer 2016, Edelstahl, 50 kg Behälter und Auslaufschnecke, Schneckendurchmesser 40 mm, 3-Phasen-Anschluss, vier Stück vorrätig Iaedpfxow Dg Ucs Adkop

Stanje: rabljeno, Leto izdelave: 1996, Radial fan, radial blower, radial blower for chips extraction, extraction fan, extraction system, chip extraction blower, high-performance fan - Manufacturer: Reitz, radial fan for chip extraction, Type MXE 020-018030-00 - Motor: Dutchi DM 160 MX2 15 kW Iaedpfxoqvp N De Adksp - Speed: 2,935 rpm - Airflow rate: 180 m³/min / 10,800 m³/h - Inlet connection: Ø 245 mm - Outlet connection: Ø 390 mm - Dimensions: 1,460/1,160/H1,500 mm - Weight: 392 kg