Standardni vlačilec

Mercedes-Benz Actros 1848 LS 4xSHZ ACC AUT z KlimaA SD

Stanje: rabljeno, prevoženi kilometri: 280.000 km, moč: 350 kW (475,87 KM), prva registracija: 09/2022, vrsta goriva: dizel, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, gorivo: dizel, barva: modra, voznikova kabina: spalna kabina, vrsta prenosa: samodejen, emisijski razred: Euro 6, vzmetenje: zrak, število sedežev: 2, Oprema: ABS, airbag, centralno zaklepanje, greljenje sedeža, klimatska naprava, nadzor oprijema, navigacijski sistem, parkirni grelec, računalnik na krovu, servovolan, D6G Automatic climate control, A1C front axle 7.5 t, A1Z front axle cranked version, A2E rear axle: crown wheel 440 Hypoid, 13.0 t, B1B electronic braking system with ABS and ASR, B1F heating, electronic compressed air supply unit, B2A disc brakes on front and rear axle, B4A condensate monitoring for compressed air system, B4M compressed air tank: steel, B5J brake and electrical connections: low-mounted, C0G frame overhang 1050 mm, C1W wheelbase 3700 mm, C5D step entry behind cab, left, C5P screwed frame, C6G steering: Servotwin, C6I regulated hydraulic steering pump, C6Q front axle stabilizer, C7F front underrun protection (ECE), aluminium, C7T integral rear, C8C rear axle mudguard, 2500 mm vehicle width, C8H 3-piece mudguard with EU-type spray protection, C8I spray protection (EU) front, C8Y underbody fairing, aerodynamic, D0A leather steering wheel, D0S compressed air connection in cab, D0U smoke detector in cab, D1C driver suspension seat comfort, D1N multifunction co-driver’s seat, D2N seat back release: driver’s seat, D3A upper comfort bed, wide, adjustable, D3B lower comfort bed, D3M PremiumComfort mattress lower, D3N PremiumComfort mattress upper, D3Q seat cover: velour, driver’s seat, D3T seat cover: velour, co-driver’s and center seat, D4S sun blind, 1-piece, electric, windscreen, D4T curtain across in front of bed(s), D4Z sun blind, side, driver and co-driver side, D5Z carpet on engine tunnel, D6C electric stationary air conditioning, D6I residual heat utilization, D6M hot water auxiliary heating. You can reach us by phone Monday to Friday until 8:00 p.m. and Saturday until 4:00 p.m. Cgodpfxsifv Tze Agqjw Further information: Leasing/financing and trade-in possible. - Subject to errors and prior sale - All information provided without guarantee ... more on our homepage.

Leto izdelave: 2017, stanje: pripravljen za uporabo (rabljen), A spinning, drawing, and winding line for the production of monofilament yarns, multifilament FDY, and POY is available. Spinning positions: 24, yarn ends: 192, drawing: cold and hot godets, doff change: without yarn break, number of heated/cold godets: 50/50, winders: 24 (+2 reserve winders). Includes various spare parts for the machine and electronics. Documentation available. On-site inspection possible. Cedpfx Ajuanq Tjgqogw

Stanje: rabljeno, prevoženi kilometri: 180.000 km, moč: 350 kW (475,87 KM), prva registracija: 11/2022, vrsta goriva: dizel, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, gorivo: dizel, barva: modra, voznikova kabina: spalna kabina, vrsta prenosa: samodejen, emisijski razred: Euro 6, vzmetenje: zrak, število sedežev: 2, Oprema: ABS, airbag, centralno zaklepanje, greljenje sedeža, klimatska naprava, nadzor oprijema, navigacijski sistem, parkirni grelec, računalnik na krovu, servovolan, D6G Automatic climate control, A1C front axle 7.5 t, A1Z front axle cranked version, A2E rear axle: crown wheel 440 Hypoid, 13.0 t, B1B electronic braking system with ABS and ASR, B1F heating, electronic compressed air supply unit, B2A disc brakes on front and rear axle, B4A condensate monitoring for compressed air system, B4M compressed air tank: steel, B5J brake and electrical connections: low-mounted, C0G frame overhang 1050 mm, C1W wheelbase 3700 mm, C5D step entry behind cab, left, C5P screwed frame, C6G steering: Servotwin, C6I regulated hydraulic steering pump, C6Q front axle stabilizer, C7F front underrun protection (ECE), aluminium, C7T integral rear, C8C rear axle mudguard, 2500 mm vehicle width, C8H 3-piece mudguard with EU-type spray protection, C8I spray protection (EU) front, C8Y underbody fairing, aerodynamic, D0A leather steering wheel, D0S compressed air connection in cab, D0U smoke detector in cab, D1C driver suspension seat comfort, D1N multifunction co-driver’s seat, D2N seat back release: driver’s seat, D3A upper comfort bed, wide, adjustable, D3B lower comfort bed, D3M PremiumComfort mattress lower, D3N PremiumComfort mattress upper, D3Q seat cover: velour, driver’s seat, D3T seat cover: velour, co-driver’s and center seat, D4S sun blind, 1-piece, electric, windscreen, D4T curtain across in front of bed(s), D4Z sun blind, side, driver and co-driver side, D5Z carpet on engine tunnel, D6C electric stationary air conditioning, D6I residual heat utilization, D6M hot water auxiliary heating. You can reach us by phone Monday to Friday until 8:00 p.m. and Saturday until 4:00 p.m. Further information: Csdpfsi Eqhwox Agqogw Leasing/financing and trade-in possible. - Subject to errors and prior sale - All information provided without guarantee ... more on our homepage.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2001, A complete 5-layer co-extrusion blown film line with 5 extruders and all peripheral equipment is available. Overall system dimensions (L/W/H): 14m/22m/11m. Die head: Kiefel Worms FSBK 500 with IBC, die diameter: 500mm, film width range: 700mm-2000mm, haul-off width: 2000mm, winding width: 2000mm, line speed: 120m/min, melt output: 500kg/h, total power requirement: approx. 300kW. 1) Double winder by Wintech, winding width: 2000mm, film thickness range: 35µm-150µm, max. roll diameter: 1000mm, max. roll weight: 1900kg, core inner diameter: 152mm/6 inches. 2) Extruder Kiefel Worms 70.29D, power: 89kW, screw: 5-zone barrier screw, speed: 125rpm, overhauled: 2010. 3) Adhesion-promoting extruder Kiefel Worms 50.25D, power: 34kW, screw: 3-zone barrier screw, speed: 200rpm. 4) Central extruder Kiefel Worms 50.25D, power: 34kW, screw: 3-zone core progressive screw, speed: 175rpm. 5) Adhesion-promoting extruder Kiefel Worms 50.25D for the outer layer, power: 34kW, screw: 3-zone barrier screw, speed: 200rpm. 6) Outer layer extruder Kiefel Worms 80.25D, power: 125kW, screw: 5-zone barrier screw, speed: 150rpm. 7) Film calibration device Reinhold SRK 200/9.6. The entire line is controlled by a Plast Control system. Further features include: integrated width measurement, C-Scan for profile measurement, web guiding system, corona treatment, and film draw-off. Included: one spare 5-layer FSBK die head with IBC, spare rollers, ring gap blower with filter, extraction units, crane, and external control terminal. Documentation available. On-site inspection possible. Cgjdpfxov T An Se Agqew

Stanje: dober (rabljeno), 1200 m² steel platform Used, in good condition, see pictures. Column grid approx. 10x6 m Load capacity per m²: 800 kg Stairs, railings, transfer station, lift, and much more available! Cgjdpfx Aget Ivwxjqew Negotiable price: € Price on request! Partial purchase and CAD planning possible. All drawings and structural calculations available. Goods in stock. Transport and assembly available on request. Inspection possible at any time by appointment. Further information on request. Constant stock of over 5,000 linear meters of pallet racking from various manufacturers. (Technical data, specifications, details, and prices subject to change and prior sale! See our T&Cs, all prices excl. VAT ex works.)

Leto izdelave: 1996, stanje: dober (rabljeno), Manufacturer: KRAUSS-MAFFEI KMD-2-50-KK Description: Used, fully functional Model: KMD-2-50-KK Output: max. approx. 140-180 kg/h for H-PVC pipes; actual values may vary depending on material and product Year of manufacture: 1996 Screw diameter: 50-103 mm (conical) Screw length: 1300 mm Screw speed: max. 43 m/min Drive motor: DC motor, 25 kW Cylinder heating/cooling zones: 4/3 (oil cooling) Feed zone heating: 1 Tool heating zones: 5 Equipment: Dosing unit with hopper, vacuum pump for cylinder degassing, cylinder cooling unit, screw tempering Csdeh Nmt Depfx Agqjgw Gearbox: Gearbox was replaced at 53,000 operating hours. Overhauled screws and cylinder Note: Current operating time is 62,590 hours.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1998, premer vijaka: 85 mm, Complete extrusion line. Individual components can also be offered on request. The line was used for producing pipes made of PP filled with chalk and barium sulfate. Components: - 4-Component Colortronic dosing system (new control system in 2017) - Berstorff KMC 85/2 (screws renewed in 2019) Cgedpfx Agsu Rda Ioqjw - Side feeder - Complete control system for the dosing units and extruder - Single-zone oil temperature control - Maag melt pump - KraussMaffei extrusion head 40 to 160 mm (with various sets) - Battenfeld V250VA vacuum tank - Battenfeld K250 VA spray bath - Sica C250 - 4 haul-off unit - Rollepaal CCM 32/170-2 saw - Battenfeld tilting table

Stanje: skoraj kot novo (rabljeno), 4,000 m² Schäfer R3000 Mezzanine, 2-storey Used, excellent condition, as new – see photos Manufacturer: SCHÄFER R3000 CAD planning and installation Price on request! Partial sale possible Negotiable price: on request! Cgsdpjfiqhdofx Agqow Goods are in stock and immediately available Transport and installation available on request. Viewing possible anytime by appointment. Further information on request. Over 5,000 running meters of pallet racking from various manufacturers constantly in stock. (Subject to changes and errors in technical data, information and prices, as well as prior sale! See our terms and conditions, all prices excl. VAT ex works) Purchase / Sale We are constantly seeking or offering various items from a wide range of sectors: clean business clearances company liquidations Fast – flexible – effective! We also clear and/or dispose for insolvency administrators. Please contact us with a few keywords and we'll get back to you promptly. To visit our page, please click on our logo!

Stanje: rabljeno, Leto izdelave: 2009, številka stroja/vozila: PR21, Technical Specifications & Performance Data This Husky injection molding machine is engineered for high-volume production of PET preforms, making it ideal for integration into a used bottling line or as a second-hand addition for industrial packaging operations. The 120-ton clamping platform is combined with a 32-cavity hot runner system, ensuring uniform output of PET preforms for multiple bottle formats. Manufactured by Husky in 2009, the unit is designed for rapid mold changes and stable cycle times, supporting beverage production with precise neck finishes and preform weights. Manufacturer: Husky Model: HyPET120 P85/95 E85 Year of manufacture: 2009 Clamping force: 120 tons Cavities: 32 Hot runner system: Husky 32-cavity hot runner, uniform across supplied molds Neck finishes: 29/25 mm primary; additional parts for 30/25 mm Preform weights (29/25 mm sets): 9.02 g, 12.46 g, 18.70 g Additional 30/25 mm parts: 10.5 g, 14.0 g, 22.0 g, 25.0 g (one complete assembled set at 22.0 g) Cgodpfsyhbd Sex Agqew Typical cycle times: 7 s, 8 s, 9 s Electrical supply: 400 V, 50 Hz, 3~ + N + PE Main supply current: 191 A (auxiliary supply: 40 A) Short-circuit resistance (control cabinet): 10 kA Included peripherals: Plastic Systems granulate dryer with material hopper, mold dehumidifier, and available spare parts Supported bottle formats via preforms: 0.2 l, 0.5 l, 1.0 l Container material: PET Advanced Automation & Control Systems The machine is equipped with Husky technology for precise temperature control, shot consistency, and efficient thermal management in the 32-cavity hot runner. The injection system supports quick setups using plug-and-play cold half-molds, simplifying format and weight changes. Operator interaction is optimized via an integrated control interface for recipe management, alarm diagnostics, and process monitoring. The control cabinet is designed for industrial use, with 10 kA short-circuit resistance and clear separation of main and auxiliary power supplies. Integrated HMI for process control and monitoring Hot runner temperature control across all 32 cavities Quick-change cold half-molds, mold plate, and cooling interface Electrical: 400 V, 50 Hz, three-phase with neutral and protective earth Integration Options for Production Lines Optimized for PET preform manufacturing, this system integrates seamlessly with upstream material handling and downstream conveying to stretch blow molding machines, quality control, and packaging stations in beverage production. The included Plastic Systems granulate dryer and mold dehumidifier stabilize material and tooling conditions, improving repeatability and throughput in complete bottling and packaging plants. Inline or standalone operation for preform supply Compatible with ind...

Stanje: skoraj kot novo (rabljeno), 2,700 m² Schäfer R3000 Mezzanine, 2-tier Used item, excellent condition, as new – see photos Manufacturer: SCHÄFER R3000 CAD planning and installation available Price on request! Partial purchase possible Negotiable price: on request! Stock item, immediately available Transport and assembly available on request. Inspection possible anytime by appointment. Further information on request. Constant stock of over 5,000 running meters of pallet racking from various manufacturers. (Subject to changes and errors in technical specifications, data, and prices, as well as prior sale! Refer to our Terms and Conditions. All prices excl. VAT, ex-stock.) Buying / Selling: We are constantly looking for or offering numerous items from various sectors: - Swept-clean company clearances - Liquidations - Fast, flexible, and efficient! Cgedpfefiqhfox Agqow We also clear out and/or dispose for insolvency administrators. Just send us a brief message and we will respond promptly. To visit our website, please click our logo!