Varilna enota

Mentallit PROFI-LINE 215 AC/DC WIG

Leto izdelave: 2013, Stanje: pripravljen za uporabo (rabljen), The following units are available: one Rehm Invertig Pro 350 AC/DC and one Rehm Invertig Pro 450 DC, both used and in good condition. 1) Invertig Pro 350 AC/DC Standards: IEC 60 974-1, IEC 60 974-2 Welding current range (TIG): 3–350A Output voltage U₂ (at maximum current): approx. 24V Open circuit voltage U₀: approx. 91V Duty cycle (DC): 100% (for TIG at 350A) Mains voltage/input: 3-phase, 400V, 50Hz Protection class: IP 23S, safety class S Adjustment range: 3–350A (TIG) for AC/DC version Duty cycle: 100% at 40°C, 350A (TIG), 100% DC Input fuse: 32A at 3x400V for the 350 AC/DC version Dimensions: length 520mm, width 360mm, height 460mm Iaedpfx Afoxddams Tsl Weight: 29.5kg (AC/DC version) 2) Invertig Pro 450 DC Standard: IEC 60 974-1 Welding current range (TIG): 3–450A Output voltage U₂ at maximum current: approx. 28V Open circuit voltage U₀: approx. 91V Duty cycle (DC): 100% at 450A (TIG); for electrode welding, duty cycle is lower (approx. 60%) Mains/input: 3x400V, 50Hz Protection class: IP 23S Duty cycle at 100% DC, 450A (TIG) at 40°C Electrode welding current: approx. 360A at 100% DC (electrode) for the 450 DC version Power/input fuse: 32A at 400V (three-phase) for the 450 versions Dimensions: length 520mm, width 360mm, height 460mm Weight: approx. 28kg On-site inspection is possible.

Leto izdelave: 2009, Stanje: dober (rabljeno), številka stroja/vozila: 4495678, Offer 18336 Portable TIG-DC welding machine on transport trolley Technical Data: - TIG – DC + electrode welding - Welding current continuously adjustable for TIG welding from 5 A - 10.0 V up to 150 A - 22 V 35% duty cycle 100 A 100% duty cycle Iodpfx Ashq T N Dsf Toal - Power supply 220 V / 50 Hz 15 A - Equipped with: - 2-stroke / 4-stroke function - HF (high-frequency) ignition - Adjustable welding current run-down - Pre-gas and post-gas flow control - 4.5 m torch package, lightweight version - Ground cable - Pressure regulator - Space requirement: approx. W 200 x H 300 x D 500 mm - Weight: approx. 10 kg - Transport trolley with gas bottle holder: W 550 x H 900 x D 560 mm - Weight transport trolley: approx. 10 kg

Stanje: dober (rabljeno), Leto izdelave: 2019, Funkcionalnost: popolnoma funkcionalen, skupna višina: 215 mm, skupna širina: 130 mm, skupna dolžina: 360 mm, skupna masa: 7 kg, trajanje garancije: 12 meseci, vrsta hlajenja: zrak, višina izdelka (maks.): 10 mm, varilni tok pri 60% delovnega cikla: 150 A, varilni tok pri 100% delovnem ciklu: 130 A, varilni tok (min.): 5 A, varilni tok (maks.): 200 A, - Inspected used unit in excellent condition, directly from the manufacturer - - Multiple units available - MicorTIG 200 DC ControlPro (Accu-ready) TIG-DC welding inverter with MicorBoost technology (incl. gas management, high frequency ignition, and electrode welding function). All-in technology for mains, generator, and battery power Isdovxid Rjpfx Af Teal - "3 steps and weld" operating concept - Simple single-knob control - Continuously adjustable current - Precise digital ampere display - With graphical user interface on OLED graphic display - Maximum customization thanks to detailed welding cycle control - Job memory for 10 welding tasks Current list price (02/2025): 2,277 € plus VAT Scope of delivery: Unit including detachable mains cable, carrying strap, gas hose, and operating manual THE MicorTIG SERIES. THE POWER PACKS FOR MOBILE TIG WELDING. Whether for professional TIG welders or occasional users: The MicorTIG series welding machines from Lorch are the ultimate TIG units for installation work as well as for the workshop – suitable for steel and stainless steel. Whether for production or repair, and whether you have mains power on-site or not: The MicorTIG series improves TIG welding results worldwide – and makes everyday work easier. Quite literally: Weighing only 6.8 kg, you can easily take your Lorch MicorTIG welding unit anywhere – even with accessories in the carry case. Small but powerful: With patented MicorBoost technology, these machines deliver 200 amps from any standard power outlet. INTUITIVE OPERATION. Thanks to the precise digital ampere display and clearly structured control panel, operation is intuitive and highly precise. Optionally available: an operating concept via graphic display. CONTACTLESS HF IGNITION. TIG ignition occurs contactlessly with high-voltage pulses at the push of a button. Since the tungsten electrode does not touch the workpiece, no inclusions are created in the seam and the electrode is preserved. PULSING AND FAST PULSING UP TO 5 kHz. The integrated pulse and fast pulse functions up to 5 kHz are ideal for working with thin sheet metal. They enable outstanding weld pool control and perfect results, even for demanding welding tasks. JOB MEMORY FOR UP TO 10 WELDING TASKS. With the job function, you can save parameters for up to 10 welding tasks and quickly retrieve them when needed. Recurring jobs are therefore completed quickly and efficiently. PERFECT FOR ELECTRODE WELDING. The MicorTIG machines from Lorch are suitable for every type of electrode and offer convenient pre-selection for CEL and standard electrodes. Even special electrodes are no problem. During welding, arc force regulation ensures arc stability and optimum material transfer. The anti-stick system prevents sticking or annealing of the electrode. WITH MicorBoost TECHNOLOGY – UP TO 200 A FROM THE OUTLET. The patented MicorBoost technology provides substantial voltage reserves and controls the TIG arc extremely stably, safely, and precisely – even with fluctuating mains voltage. This enables you to weld with up to 200 amps on a regular power outlet.

Stanje: skoraj kot novo (rabljeno), Stolpna vrtalna naprava Gillardon tip GB 30 V, hitrost 60-1800 obr./min, avtomatski pomik, zelo dobro stanje Iodexpxbcepfx Af Toal

Stanje: novo, Table height: 650 - 1050 mm Iodpfx Afofk E Dze Toal Dimensions (LxWxH): 1980 x 1480 x 650 to 1050 mm Table width: 1480 mm Table length: 1980 mm Approximate weight: 491 kg This allows the user to flexibly adjust the working surface height to the respective requirement in order to improve efficiency and ergonomics. Height adjustment is standardly accomplished via a manual hydraulic system within a range of 650 to 1050 mm (other ranges available upon request). Like the SST fix series, the worktop features a 100 x 100 mm Ø 28 mm hole grid. Used in combination with processing machines, inspection or finishing fixtures (deburring, marking, testing) can be adjusted to the height of the machine’s clamping table. The table systems can be easily relocated on site using pallet trucks. These mobile systems have proven ideal, with various clamping and securing options, for the maintenance of injection molding and die-casting tools. Tools can be safely maintained immediately after removal from the machine and then transferred to maintenance for repairs. Thanks to the fully bolted design of the clamping plate, the working surface can be replaced cost-effectively if wear occurs later on. Table 2 below provides an overview of the available standard models. Prices must be confirmed with the manufacturer prior to ordering!!

Stanje: zelo dobro (rabljeno), The Weldkar TIG 2025 230 V AC/DC portable inverter welder features a welding current range from 10 to 200 A and comes equipped with all the essential options one would expect from a professional TIG welding machine. The welder offers HF ignition, up- and downslope adjustment, 2-4 stroke control, gas flow control and post-flow, as well as pulse frequency adjustment. In addition to a wide range of settings and adjustments for (pulsed) TIG welding, this unit is also equipped with an MMA function (for stick electrode welding). Isdpjd Nzlxofx Af Toal Thanks to its high output, the welder is suitable for welding aluminium, stainless steel, and steel up to 5 mm. Furthermore, the Weldkar TIG 2025 AC/DC Pulse features adjustable current frequency, which improves penetration and ensures better control of the weld pool. The control panel, despite the multitude of functions and options, is straightforward and clearly arranged. THE WELDERS ARE NEW, FROM TRADE SHOWS, DEMONSTRATION UNITS.

Stanje: rabljeno, Technical Details: Power consumption: 2.3 kVA Open-circuit voltage: 56 - 198 V Ijdpfx Aeu Nwxzsf Tsal Protection class: IP44 Approximate machine weight: approx. 35 kg Machine dimensions (HxWxD): approx. 0.4 x 0.3 x 0.27 m Handheld Unit Power supply: 230V / 10A / 50Hz Stud welding unit with 3 stud-holder guns for Ø 2x 5 mm and Ø 1x 6 mm, including ground cable. Device has been tested and is fully functional.

Stanje: zelo dobro (rabljeno), 2x Hahn+Kolb premični omari za orodje s 6 predali Cena velja za eno omaro za orodje! Obe skupaj staneta ustrezno 2400 € brez DDV. Rabljeno, a skoraj kot novo. Manjše sledi uporabe na delovni plošči, sicer popolnoma funkcionalno, vsaka z dvema ključema. Iasdpfx Ajnucgxjf Tsl Omara za orodje s 6 predali D x Š x V: 1025x705x930 mm Notranje mere predalov D x Š x V: 1x 880x590x240mm 5x 880x590x65mm Višina vključuje kolesa! Popolnoma funkcionalno. Možen osebni prevzem ali pošiljanje (preko špedicije).

Stanje: dober (rabljeno), TIG welding machine - Nimak electrode device - Dalex converter - Hose package - Ground cable Iasdpfx Afob A H I So Tjl

Stanje: zelo dobro (rabljeno), Stud Welding Machine Manufacturer: TRW. Nelson Model: Alpha 850 Year of manufacture: 1995 Maximum welding capacity: studs up to 12 mm Welding current: steplessly adjustable from 100 to 850 A Connection voltage: 400 V, 32 A Transport dimensions: Length: 550 mm Width: 320 mm Isdpfxovcl T Aj Af Tsal Height: 380 mm