Navojni ploščati matični valj

MENN GW62

Stanje: rabljeno, Leto izdelave: 1974, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: M14I/9064, Številka ponudbe: M14I/9064 Vrsta stroja: Valjar za ploske navoje Info: Nihajni podajalnik Proizvajalec: MENN Fsdpfx Afsxnytqoloft Tip: GW62 Letnik: 1974 Razpon premerov: 3-8 mm Dolžina stebla pod glavo: 80 mm Maks. dolžina navoja: 55 mm Zmogljivost kosov/min: 300 Lokacija: V Nemčiji

Stanje: rabljeno, Thread Rolling Machine - Thread Rolling Machine ORT RP18 2-Roll Shaft diameter: 69.95 mm See video The machine is located in our warehouse in Gussago (BS), powered on Test run possible Mimu Werkzeugmaschinen Fsdpfet Apugox Aflsft Rolling is a mechanical process without chip removal, which can be performed either cold or hot, aimed at improving the surface finish (and consequently the fatigue performance).

Stanje: rabljeno, Leto izdelave: 1968, Hilgeland deburring press ME2 VM for sale. Fsdpfx Asur N Ewjfljft

Stanje: rabljeno, Leto izdelave: 2001, Press force 0.2–40 t Max. workpiece diameter: 70 mm Thread length: 120 mm Control system: Total power requirement: 29 kW Machine weight: approx. 9.5 t Space requirement: approx. m Offer We are pleased to offer you, subject to prior sale and errors in technical specifications, from our stock: PROFIROLL – BAD DÜBEN (Germany) CNC Thread, Gear, and Profile Rolling Machine Model: ROLLEX Year: 2001 Rolling force, steplessly adjustable: 0.2–40 tons Rolling spindle diameter: 120 mm Max. workpiece diameter (approx.): 70 mm Each spindle drive: approx. 8.5 kW Total connected load: approx. 29 kW – 400 V – 50 Hz Weight: approx. 9,500 kg Accessories / Special Features: • The machine is equipped with a modern CNC control system developed by the manufacturer. All relevant process and workpiece parameters can be entered, allowing quick and easy changeover for different workpiece sizes (changeover time). All process parameters are graphically displayed on the monitor, providing the user with an optimized process cycle. • Integrated (workpiece) center rolling device for shaft-shaped workpieces (such as gear shafts) with center holes, including a clamping device and prismatic positioning fixtures for pre-aligning the workpiece before clamping, as well as a motorized (driven) tailstock center on the front side of the workpiece. The workpiece slide stroke is approx. 500 mm—thus, the workpiece is clamped and hydraulically moved between the two rolling tools. Fsdpfx Afot Hw N Toljft • Hydraulic oil chiller, separate electrical cabinet, CNC control panel, etc. • Transparent safety enclosures in the working area. Centralized lubrication.

Leto izdelave: 1988, Stanje: dober (rabljeno), Carlo Salvi 1-stopenjski, 2-udarni stroj Model 780/SV Maksimalni premer odrezka (mm): 6,35 Maksimalna dolžina odrezka (mm): 97 Maksimalna dolžina izmeta (na strani matrice) (mm): 80 Ffodpjhrdmxsfx Aflet Maksimalna hitrost (kosov/min): 360

Stanje: zelo dobro (rabljeno), Leto izdelave: 2015, Rolldruck Stufenlos regelbar von 117 kN Vorschub - Feinverstellung 0,5-45 mm/min Drehzahl 0-80 U/min Schwenkwinkel der Rollköpfe 11 ° Durchmesser der Rollspindeln 69,85 mm Hub - Rollspindelschlitten 0-150 mm min. Abstand - Rollspindeln 138 mm max. Abstand - Rollspindeln 285 mm min. Durchmesser - Rollwerkzeuge 230 mm max. Durchmesser - Rollwerkzeuge 135 mm kleinster Durchmesser 2 mm größter Durchmesser 55 mm Gewindelänge im Einstechverfahren 200 mm Gewindelänge im Durchlaufverfahren 2000 mm größte Steigung d. Gewindes 4 mm Gesamtleistungsbedarf 14 kW Maschinengewicht ca. 2,4 t Raumbedarf ca. 2,0 x 2,5 x 1,9 m Rollzeit stufenlos einstellbar von: 0,1s Ffsdexukrqopfx Aflot Pausenzeit stufenlos einstellbar von: 0,1s Aufnahmelänge der Rollspindeln: 200mm Maschinenbetthöhe: 810mm Rollspindelhöhe über Maschinenbett: 200mm Höhe der Stützlager: 115mm Größte Teilung bei Kerbverzahnung: 2,5mm -(bis 70kg/mm2 Festigkeit d. Werkstoffes)

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1970, Funkcionalnost: popolnoma funkcionalen, dolžina gredi pod glavo: 30 mm, dolžina odseka (maks.): 52 mm, Double-action press Hilgeland CH1 KHA Year of manufacture: 1970 Ffedjur N Daepfx Aflst The machine is immediately ready for operation!

Stanje: rabljeno, Drilling capacity in steel (diameter): 40 mm Throat depth: 325 mm Quill stroke: 170 mm Table clamping surface: 730 x 590 mm Spindle speed: 130 - 1200 rpm Feed rate: 0.09 - 0.16 - 0.28 mm/rev Tool holder: Morse Taper 4 (MK 4) Total power requirement: 1.8 kW Machine weight: approx. 0.7 t Fedswn T A Uopfx Afljft Dimensions (L x W x H): 1.2 x 0.8 x 2.15 m Drilling machine equipped with: Feed mechanism 2 gearbox speeds Forward/reverse operation Foot switch Machine lamp

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2006, Funkcionalnost: popolnoma funkcionalen, Progresivni stiskalnica SACMA SP260 5 matric – Kot nova – Popolnoma delujoča Na voljo za kakršenkoli preizkus pri HBR srl od junija 2025. Dobavljena popolnoma prebarvana in očiščena. Tehnične informacije: Število matric: 5 Stiskalna sila: 800 kN Največji premer odrezka pri 500N/mm²: 11,5 mm Največja dolžina odrezka: 85 mm Maks. izmetni hod matrice: 65 mm Maks. izmetni hod štance: 20 mm Hitrost (kosov na minuto): 275 Moč glavnega motorja: 30 kW Premer matric: 54 mm Dolžina matric: 90 mm Ffjdpfx Aswar Efsfljt Premer štancev: 45 mm Neto masa: 11.300 kg Bruto masa: 13.000 kg Vabimo vas na ogled v HBR srl v Calolziocorte (LC)

Stanje: kot nova (razstavni stroj), Leto izdelave: 2026, Rough Terrain Scissor Lift – Work Platform with Crawler Tracks and Automatic Outriggers. This offer is a hire-purchase leasing option through DLL Leasing with a term of 36 months. Credit check and processing are handled via DLL Leasing. Other leasing durations and terms upon request. FRONTEQ Model: FS0507T Load capacity: 200 kg Platform dimensions: 1.25 x 0.7 m Platform extension: + 0.6 m Transport dimensions: 1.32 m x 1.08 m Height: 2.07 m Height with rails folded down: 1.48 m Weight approx.: 900 kg Working height: 6.6 m Platform height: 4.6 m Climbing ability: up to 25° Overload protection: Fjdsgtcmzepfx Aflsft Powered by 24 V / 115 Ah battery Integrated 24 V / 20 A charger 230 V power supply to platform Non-marking bright tracks German operating manual included 2-year manufacturer’s warranty Other sizes with wheel or crawler drive available. For further technical data, offers, or information on availability, please inquire. In accordance with EU regulations, this offer is exclusively for business customers. The machine can be viewed and test-driven at our warehouse. Subject to prior sale. Specifications are provided without guarantee. Machines can be collected by the buyer or shipped by freight carrier at the buyer’s expense. Loading and packaging can be organized by us. Shipping costs are an estimate and may vary depending on distance and unloading options – please inquire. The listed sales price is the gross final price including VAT. An invoice with VAT listed will be provided. Manufacturer's warranty: 2 years. Some spare parts are available from our stock. If the item for sale is used, warranty is 12 months if the buyer is a consumer as defined by §13 BGB. If the buyer is a business as defined by §14 BGB, any warranty is excluded. If the items offered are new, warranty is 24 months for consumers (§13 BGB). If the buyer is a business (§14 BGB), the warranty is 12 months.