Škarje za odpadke

McSchrott MS-6300e

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2019, obratovalne ure: 20.000 h, Funkcionalnost: popolnoma funkcionalen, rezalna sila: 630 t, moč: 90 kW (122,37 KM), lastna masa: 36.500 kg, skupna širina: 2.400 mm, skupna dolžina: 9.500 mm, skupna masa: 40.000 kg, dolžina rezanja (maks.): 1.600 mm, leto zadnje generalne obnove: 2024, vrsta vhodnega toka: trifazni, obratovalni tlak: 220 letvica, Scrap Shear MS-6300e (scrap shear with electric motor) without operating fluids. Model: MS-6300e Fpsdpfx Ahex Tp H Hsmoh Cutting force: 630 t Cutting length: 1600 mm Discharge height: 600 mm Power: 110 kW Capacity: 12–17 t/h Machine weight: 40 t Hopper size: 3850 mm x 2600 mm x 1500 mm Information: A scrap shear is intended for cost-effective scrap cutting: - Simple automatic operation - Energy-saving - Cost-efficient - No foundation required Function: Scrap is loaded into the feed area using an excavator. Thanks to the horizontal feed hopper and the scrap’s own weight, the material drops into the loading chamber and subsequently into the cutting area. The scrap is compacted against the front wall and cut by the horizontally moving tool holder, which pushes the scrap across the front knives. As the tool carriage moves horizontally, the processed material is pushed out through the knives on the front of the container. When the carriage returns to the rear position, additional scrap moves into the machine chamber by gravity. Scrap shears are available in different configurations upon customer request, and the output size can be selected (for new orders). Inspection and a test run are possible.

Stanje: rabljeno, Leto izdelave: 1998, Technical details: Swing diameter: 830 mm Turning length: 4000 mm Swing diameter over bed slide: 540 mm Spindle bore: 130 mm Speed range: 2 - 1,600 rpm Rapid traverse speed: 4 / 5 m/min Feed rate: 1 - 2,000 mm/min Total power requirement: 55 kW Machine weight approx.: 7.5 t Space requirement approx.: 7 x 2.2 x 2 m Fpedjwwlt Rspfx Ahmsh Equipped with R&D MTC-K cycle control MULTIFIX tool holder, size D Coolant system *

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, moč: 94 kW (127,80 KM), vrsta goriva: dizel, skupna masa: 34.000 kg, Leto izdelave: 2022, obratovalne ure: 1.238 h, Maximalna zmogljivost: pribl. 500 t/h Največja vhodna velikost: 800 x 500 x 300 mm Višina nalaganja: pribl. 3.570 mm Višina nalaganja pri zloženi zadnji steni: 2.830 mm Volumen lijaka: 9,1 m³ Širina x dolžina odvzemnega traku lijaka: 1.400 x 4.500 mm Tip presejanja: Dvonadstropno grobo presejalno sito Površina sita zgornje nadstropje: 1.550 x 4.880 mm (Š x D) Površina sita spodnje nadstropje: 1.550 x 4.500 mm (Š x D) Trak za drobni material, širina x dolžina: 1.200 x 4.380 mm Odvodni trak za drobni frakcijo, širina / dolžina / izhodna višina: 900 x 7.760 / 2.960 do 3.980 mm Odvodni trak za srednjo frakcijo, širina / dolžina / izhodna višina: 900 x 7.760 / 2.310 do 3.630 mm Odvodni trak za grobo frakcijo, širina / dolžina / izhodna višina: 1.400 x 6.065 / 2.650 do 4.050 mm Pogonski koncept: dizelsko-hidravlični Proizvajalec agregata: John Deere Moč pogonskega agregata: 94–98 kW Dimenzije za transport: 15.840 x 3.000 x 3.400 mm (D x Š x V) Transportna masa: 34.000 kg Fpodexl Szzspfx Ahmjh

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2011, Cryogenic gas semi-trailer for LNG (liquefied methane). Fpjdetulh Ispfx Ahmoh Manufacturer: CRYOCAN EU approval. Year: 2011 Volume: 50.25 m³ Vacuum certificate We also have other tankers for LIN, LOX, LAR, LNG, and CO2 Argon, oxygen, nitrogen and carbon dioxide, methane, hydrogen

Stanje: rabljeno, Leto izdelave: 1999, obratovalne ure: 3.400 h, številka stroja/vozila: 261724855, TRACTOTECHNIK GRUNODRILL 10S Year: 1999 Operating hours: Reading - Bore diameter: max. 385 mm - Maximum torque: 2,500 kN - Pulling force: 96 kN - Thrust force: 65 kN Fpodpfohd I S Uox Ahmjh - Maximum drilling length: 250 m - Power: 90 kW - Drill rods and bits included - Complete equipment with separate engine, hydraulic unit, and tank for drilling fluid - Perkins engine 119 kW / 162 HP This offer is non-binding; input errors and mistakes excepted. Only the specific agreements in the order confirmation or purchase contract are valid. This contract is based exclusively on our General Terms and Conditions (GTC), which are always available on our homepage or can be requested from us. Place of jurisdiction is Eberswalde, Germany. If you have any questions, please do not hesitate to contact me. Further information Intended use: Construction industry,

Leto izdelave: 2000, stanje: pripravljen za uporabo (rabljen), Ta proizvodna linija Manni za sendvič plošče je bila izdelana leta 2000. Gre za diskontinuirano linijo za sendvič plošče s poliuretanskim jedrom, ki vključuje postaje za profiliranje, injiciranje, stiskanje, rezanje, zlaganje in pakiranje. Glavni sestavni deli so stiskalnica Manni PMC 291 T, sistem za injiciranje poliuretana Cannon H100 RF2 in različne profilirne linije Tresam. Izkoristite priložnost za nakup te proizvodne linije Manni za sendvič plošče. Za več informacij o stroju nas kontaktirajte. Vrste uporabe: Drugi stroji za pločevino Fpsdpfjx E Ef Nox Ahmeh

Stanje: dober (rabljeno), moč: 122 kW (165,87 KM), skupna masa: 27.000 kg, Leto izdelave: 2001, obratovalne ure: 21.200 h, For sale is a Sennebogen 825 Year of manufacture: 2001 Operating hours: 21,200 Fsdpfx Ahsua At Nomsph Gross weight: 27,000 kg

Stanje: rabljeno, Eldan granuliatorius HG129 Fjdpfx Ast Uyvrohmoph

Stanje: rabljeno, prevoženi kilometri: 835.837 km, moč: 309 kW (420,12 KM), prva registracija: 11/2010, vrsta goriva: dizel, lastna masa: 9.580 kg, največja dovoljena obremenitev: 16.420 kg, skupna masa: 26.000 kg, velikost pnevmatike: 315/80R22.5, konfiguracija osi: 6x2, medosna razdalja: 4.800 mm, gorivo: dizel, zavore: intarder, barva: rumena, voznikova kabina: spalna kabina, vrsta prenosa: samodejen, emisijski razred: Euro 5, vzmetenje: drugo, število sedežev: 2, skupna dolžina: 9.480 mm, Leto izdelave: 2010, gradbena višina: 3.850 mm, število postelj: 1, Oprema: ABS, klimatska naprava, nadzor oprijema, računalnik na krovu, spojka prikolice, tempomat, The Iveco STRALIS AS 260 S42 Y/FS-CM is a versatile, pre-owned truck, ideal for commercial use or export. First registered in November 2010 and with a mileage of 835,837 km, this vehicle is powered by a robust diesel engine delivering 309 kW (420 hp) and meeting Euro 5 emission standards. Equipped with an automatic transmission and a steerable/liftable axle, the STRALIS offers excellent maneuverability and versatile operation. The vehicle features a distinctive yellow metallic paint finish. With an overall height of 3,850 mm, width of 2,550 mm, and length of 9,480 mm, it is designed for heavy-duty transport and has a permissible total weight of 26,000 kg. Fedpfor Uzgcox Ahmsph The specification includes two doors and two seats, air conditioning, and an INTARDER braking system for additional safety. The truck is registered as a commercial vehicle and has a green emissions badge (Euro 4), allowing access to low-emission zones. With only one previous owner and regular maintenance, the STRALIS is ready for high-performance applications. Steerable/lift axle Sale only to businesses (agriculture, freelancers, small and large enterprises) or for export. Subject to prior sale and errors.

Stanje: rabljeno, Leto izdelave: 2006, Funkcionalnost: popolnoma funkcionalen, središčna višina pri ročični gredi: 1.100 mm, teža obdelovanca (maks.): 180.000 kg, dolžina brušenja: 11.000 mm, premer brusilnega koluta: 1.066 mm, skupna dolžina: 11.700 mm, hod vretena: 11.700 mm, teža obdelovanca med konicami: 180.000 g, razdalja med središči: 11.700 mm, POMINI CNC Rullslipmaskin Modell HD-425-2-7L Fedswdmy Sepfx Ahmeph Siemens 840D, 12 axlar. Tillverkningsår: 2006. Två plansystem – sliparens och arbetsstyckets rörelsebanor är separata. Maskinens precision: Rakehet: 0,001–0,002 mm/m Rundhet: 0,001–0,002 mm Excentricitet: 0,002 mm Kronprofil (max kronhöjd): upp till 0,1 mm ±0,002 mm/m Ytfinish utan svängmärken och utan matningsspår efter finslipning. På separat bädd: Automatisk skjutmått, diameter 870–2.250 mm Virvelströmsprovare för sprickor och slag Ultraljudsdjupmätning upp till 180 mm Högtrycks spolning av slipskivan Automatisk eller manuell dynamisk balansering av slipskiva (elektromagnetisk) Diamantutrustad slipskivsformare (slipdressing) 2 hydrostatiska stöd 2 hydrodynamiska stöd 4 mjukstartpositioner för valsar Snabbväxlingsanordning för slipskiva inkl. motor Svängkran Vibrationsmätning och loggning på: Längsbädd vid huvudlagring Nackstöden Bakre upplag Slipspindelhuvud Bakre sliphuvud Vagnens sidosida Arbetsområde: Slipning längd: 11.000 mm Max diameter med 1.066 mm slipskiva: 2.200 mm Min diameter med 1.066 mm slipskiva: 800 mm Centrumavstånd: 11.700 mm Maximal valsvikt: 80 ton (utan stöd), 180 ton (med stöd) Minsta avstånd mellan slipskivans centrum och valsaxel: 845 mm Största avstånd mellan slipskivans centrum och valsaxel: 1.635 mm Bäddlängd, axel Z (hydrostatisk): Matning, steglöst 0–6.000 mm/min Oljefilmstjocklek: 0,020 mm Avstånd mellan vaggbäddar: 1.500 mm Bäddbredd: 160 mm Vagnens längd på bädden: 3.385 mm Slipspindelhuvud (axel X), slipskiveprob (axel A), inspektionsaxel A1: Slipspindelns tvärrörelse (kulkruv), axel X: 940 mm Upplösning axel X: 0,0001 mm Slipspindelns längd: 1.695 mm Spindellagers hydrostatisk diameter: 254 mm Manuell finskala, axel X: 0,00001 mm / division Kontinuerlig matning av slipskivan, U-axel: 0–0,35 mm/min Snabbmatning slipskiva, axel X: 0–830 mm/min Slipmotor (AC): 130 kW Slipspindelns varvtal: 400–1.100/1.600 rpm Slipningens yt-hastighet: steglöst Ythastighet slipskivdiameter 1.066 mm: 45 m/s Ythastighet slipskivdiameter 670 mm: 45 m/s Slipskivehål diameter: 508 mm Slipskivetjocklek: 76–152 mm Slipskivediameter: 670–1.066 mm Kroning, U-axel: Maximal krona på diameter: 10 mm Maximal konkavitet på diameter: 10 mm Huvudspindel: Arbetsstyckets varvtal: 5–50 rpm Huvudspindelmotor: 200 kW Max transmiterbart moment: 76,5 kNm Plansystemsdrift: V-remmar Max centrumdiameter, metriskt: 160 mm Pinolslag: 150 mm Huvudspindellängd: 3.110 mm Bakspindel: Pinoldiameter: 260 mm Pinolens slag: 750 mm Max centrumdiameter, metriskt: 160 mm Kon: Metrisk 5 % på diameter Bakspindellängd: 1.300 mm Bakspindelslag: 8.000 mm Skjutmått, arm Axel C, vagn Axel V, rotationsaxel B: Max mätbar diameter: 2.250 mm Min mätbar diameter: 870 mm Maskinens mått: Maskinvikt: 130 ton Längd: 19,5 m Bredd: 5,5 m Höjd: 3,2 m Fundamentdjup: 3,8 m