CNC stružnica

MAZAK Quick Turn 10

Stanje: potreben popravila (rabljeno), Funkcionalnost: nefunkcionalno, CNC stružnica Njdeumlwxspfx Adyjwb

Stanje: rabljeno, Leto izdelave: 2020, DOOSAN LYNX 2100LYA Leto izdelave: 2020 FANUC upravljalnik na dotik Specifikacije: Njdpfox Id D Ajx Adyowb Maks. hitrost vretena: 6000 obr/min Maks. dolžina struženja: 510 mm Maks. premer palice: 51 mm Maks. premer struženja: 300 mm Os Y: 105 (±52,5) Os C: 360 Glava: BMT45P 24 pozicij - Programabilna konica - Merilna sonda za orodje - Odmetalnik ostružkov LNS - Pogonski držala za orodja 4 kosa (2/2) - Navadni držala 6 kosov Število delovnih ur: 3177 ur

Leto izdelave: 1990, Stanje: dober (rabljeno), številka stroja/vozila: 92041, Table clamping surface: 410 x 900 mm Travel paths (X/Y/Z): 560 / 410 / 380 mm Spindle taper: SK 40 Spindle speeds: 22 - 6000 rpm Feed rates: X and Z up to 10,000 mm/min, Y up to 240 mm/min Njdedhhprepfx Adyjwb Required space: 2,600 x 2,000 x 2,300 mm Weight: 3,500 kg

Stanje: rabljeno, Leto izdelave: 1985, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 4.700 mm, pomik osi Y: 2.250 mm, pomik po osi Z: 1.300 mm, skupna širina: 3.000 mm, skupna dolžina: 8.710 mm, skupna višina: 5.250 mm, premer vretena: 130 mm, obremenitev mize: 16.000 kg, dolžina mize: 2.200 mm, širina mize: 2.200 mm, skupna masa: 40.000 kg, Accessories: Nwjdpjw Hr Hpofx Adyjb 2 different heads 1 faceplate

Stanje: rabljeno, Leto izdelave: 2009, Offered here is a used machining centre from the manufacturer Deckel Maho DMG. The machine is under power and can be inspected at our facility. Ex works, loaded on truck Manufacturer: DMG Deckel Maho Model: DMC 125 H duoBlock Year of manufacture: 2009 Control: Siemens 840 D Solutionline (PCU 50) Technical data: Travel X, Y, Z axes: 1250 x 1000 x 1000 mm Feed rate X, Y, Z axes: 20 - 60,000 mm/min Rapid traverse X, Y, Z axes: 60 m/min B-Axis travel: 360 x 0.001° B-Axis feed rate: 10,800°/min Nodpfjw Ew T Sjx Adyowb Max. table rotation speed: 30 rpm Spindle speed: 20 - 8,000 rpm Gear ranges: 2 Max. workpiece diameter: 1,250 mm Max. workpiece height: 1,580 mm Clamping area: 800 x 800 mm Max. workpiece weight: 1,500 kg Pallet weight: 570 kg Max. permissible weight difference for pallet loading: 1,000 kg Tool holder: SK 50 according to DIN 69871 Maximum tool length: 650 mm Tool magazine: 120 positions Transport dimensions: 6,500 x 3,000 x 3,200 mm Transport weight of the machine (without magazine or other accessories): approx. 20,000 kg Required space: approx. 7,000 x 6,000 mm Total weight of the machine: 24,000 kg Accessories: - Chip conveyor with coolant tank - Coolant system - 4x machine pallets - Tool magazine - Oil mist extraction - Various new spare parts: 1x Y-axis length measuring system (new) 1x lubrication unit 230V 0.12 30bar (new) 1x gear unit P-AGG*MKF1-KW2-20036 (new) 1x Cyclo gearbox F1C-A25 (new) 1x retrofit kit power module (new) 1x lifting devices for the machine

Stanje: rabljeno, Leto izdelave: 2008, Article: Vertical Turning and Grinding Center Njdpfx Aoia Rtdjdyowb Brand: EMAG Model: VSC 250 DS Year of Manufacture: 2008 Control: SIEMENS 840D Grinding Spindle Speed: 30,000 rpm Turning Spindle Speed: 3,000 rpm Turret Tool Stations: 12 Cooler for spindle and machine bed cooling Coolant lifting station (no independent coolant supply) Chip conveyor Parts handling system Air through the spindle Two clamping circuits through the spindle (air and oil) Unfortunately, the grinding spindle is defective. However, it can be overhauled by a spindle repair shop. Otherwise, the machine is in very good condition and fully operational. Please contact us for further information and pictures via mail(at) or

Stanje: rabljeno, Leto izdelave: 1952, Technical Details: Swing diameter over bed: 1000 mm Swing diameter over slide: 520 mm Turning length: 2500 mm Slide travel Z-axis, saddle: approx. 500 mm Slide travel Z-axis, top slide: approx. 300 mm Center height: 300 mm Spindle bore: 90 mm Speed range: 3.2 - 382 / 22 steps rpm Feed range X-direction, longitudinal: 0.213 - 2.67 / 36 steps m/min Feed range Y-direction, cross: 0.070 - 1.11 / 36 steps m/min Tailstock quill taper: MK 6 Total power requirement: 22 kW Machine weight approx.: 8.2 t Machine dimensions approx. LxWxH: 5.3 x 1.6 x 1.6 m Transport dimensions approx.: 5.5 x 1.7 x 1.6 m Equipment: Nwjdpfx Aju Tq U Ijdyjb Face plate Ø 1000 mm 4-position tool post Steady rest Ø 250 mm, closed Accessories: Four-jaw chuck Ø 630 mm

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2017, Wheel diameter - max. 100 mm Wheel width 26 mm Module - max. 3 Module - min. 0.1 Control system Siemens 840 D SL Operating hours 9,598 h Total power requirement 45 kW Machine weight approx. 7 t Space requirement approx. 4x3x2.5 m Gleason 100S Gear Shaping Machine for manufacturing internal and external cylindrical gears and other regularly recurring rollable profiles and shapes on the cylindrical workpiece circumference, as well as for single-piece production of profiles. Technical specifications: Nominal workpiece diameter 100 mm Maximum rotating diameter 150 mm Nominal module of the machine approx. 3 mm (reference value depending on the respective machining task) Stroke spindle speed range 0 - 3,000 rpm Manual stroke position adjustment range 20 mm Maximum gear width 26 mm Minimum rise height of hydrostatic skew guide 400 mm Minimum/maximum distance between tool and workpiece spindle -20/+180 mm Column tilt range (manual) -1/+11° Tool holder (manual clamping) HSK-D63 Nwedpfx Adjv Ehbbjysb (Hollow shank taper according to DIN 69063) Machine weight approx. 7,000 kg with robot cell

Stanje: rabljeno, Leto izdelave: 2014, Workpiece length: 100 mm Swing diameter: 80 mm Number of spindles: 2 Control system: FANUC 31i-B5 Nodpfx Adovx Uvfjyswb Workpiece weight: 2.00 kg Centre height: 170 mm Grinding wheel diameter: 100 mm Grinding wheel bore: 32 mm Max. grinding wheel width: 20 mm Max. peripheral speed: 125 m/sec Steady rest passage: 45 - 60 mm Total connected load: 75.00 kW Machine weight approx.: 25.00 t Space requirement approx.: 5.00 x 3.50 x H3.50 m Cam grinding machine for cam components. Equipped with FANUC 31i-B5 control for non-cylindrical grinding; loading gantry; CO2 extinguishing system; suitable for CBN grinding wheels; tailstock; steady rest; diamond wheel dresser for the grinding wheel mounted on the dressing spindle; grinding spindle stock version 12 (two grinding spindles independently movable).

Stanje: zelo dobro (rabljeno), stružna dolžina: 5.500 mm, Manufacturer: WEIPERT Model: W1400 Control system: R&D MTC3 Turning length: 5,500 mm Swing over bed Ø: 1,400 mm Swing over cross slide: 960 mm Length: 9,000 mm Width: 2,900 mm Height: 2,900 mm Nwsdpewzhzlsfx Adysb Weight: 32,000 kg