CNC avtomatska stružnica

MAZAK QTN-350M

Stanje: dober (rabljeno), Leto izdelave: 2006, Največji premer obdelave: 420 mm, Premer nad posteljo: 750 mm, Največja dolžina obdelave: 1524 mm, Prehod skozi vreteno: 102 mm, Glavno vreteno: 3300 obr./min, Rezkanje: 4000 obr./min, 12-pozicijski revolverski glava, Moč motorja: 30 kW, Trivrata vpenjalna glava, Mazatrol 640T Nexus krmilnik, C-os z natančnostjo 0,001°, Nastavitev orodij, konjiček, transporter odrezkov. Fjdpfjyt H Tvjx Ahmsph

Stanje: zelo dobro (rabljeno), Leto izdelave: 1999, CNC Lathe MAZAK SQT 200 MS Year of manufacture: 1999 With specified tools and sub spindle Control: Mazatrol PC Fusion CNC 640T Technical Data: Max. swing diameter: 525 mm Max. swing diameter over carriage: 350 mm Max. turning diameter: 300 mm Bar work up to max. diameter: 51 mm Main spindle: Speed range: 35 – 4,000 rpm Main drive power: 15 kW Max. torque: 350 Nm Spindle nose: A2 – 6 inch Spindle bore: 61 mm Spindle positioning C-axis: 0° – 360° / 0.001° Second spindle: Speed range: 35 – 5,000 rpm Drive power: 7.5 kW Max. torque: 57 Nm Indexing: 72 positions / 5° Turret: Number of tool stations: 12 (can be equipped with both fixed and driven tools) Turret indexing time: 1st station: approx. 0.2 s Driven tools: Drive power: 3.7 kW Max. torque: 35 Nm Speed range: 25 – 4,500 rpm Axes travel: Turret travel: X-axis: 190 mm Fjdox Hgl Hopfx Ahmjph Z-axis: 575 mm B-axis: 585 mm Traverse speed: Rapid traverse: X-axis: 30 m/min Z-axis: 30 m/min B-axis: 18 m/min Feed rate: X/Z-axis: 0 – 5,000 mm/min C-axis: 1 – 2,000° / min

Stanje: rabljeno, Leto izdelave: 1998, Technical details: Swing diameter: 830 mm Turning length: 4000 mm Swing diameter over bed slide: 540 mm Spindle bore: 130 mm Speed range: 2 - 1,600 rpm Fpedpfjwwlt Rox Ahmjh Rapid traverse speed: 4 / 5 m/min Feed rate: 1 - 2,000 mm/min Total power requirement: 55 kW Machine weight approx.: 7.5 t Space requirement approx.: 7 x 2.2 x 2 m Equipped with R&D MTC-K cycle control MULTIFIX tool holder, size D Coolant system *

Stanje: dober (rabljeno), TECHNICAL DATA AXES Rapid traverse X, Y: 15,000 mm/min Rapid traverse A, B: 15,000 mm/min Rapid traverse Z1, Z2, E: 18,000 mm/min Rapid traverse C: 90,000°/min Minimum input increment: 0.001 mm Minimum input increment, C-axis: 0.001° MACHINING CAPACITY Max. turning diameter: 20 mm Max. spindle stroke: 205 mm Max. drilling capacity: Stationary: 14 mm; Driven: 8 mm Max. tapping capacity: Stationary: M10 x P1.5; Driven: M6 x P1.0 MAIN SPINDLE Spindle speed: 500 – 10,000 rpm Drive: Spindle drive Main spindle motor: 3.7 / 5.5 kW Main spindle bore: 26 mm SUB SPINDLE Max. clamping diameter: 20 mm Max. part length for forward ejection: 150 mm Max. unclamping length: 75 mm Spindle speed: 500 – 10,000 rpm Sub spindle motor: 2.2 / 3.7 kW Indexing angle: 1°, 15° CONFIGURATION Operating mode: Right-handed Dimensions: 2,700 x 1,400 x 2,400 mm Weight: 3,400 kg SCOPE OF DELIVERY Includes (not exhaustive): Control: Fanuc Fire extinguishing system: Siemens Oil mist separator: Donaldson Transformer Hydraulic unit Parts conveyor Chip conveyor Bar feeder: LNS Tool holder Fpjdpfx Aou Uic Tjhmsh Exact scope of delivery as per photos We do not guarantee the correctness, completeness or currentness of the information provided.

Leto izdelave: 1993, stanje: rabljeno, TYPE: DEA 400/2000 Year: n.d. Ram Capacity: 400 tons Slide Stroke: 1,100 mm Max Shut Height: 1,600 mm Table Size: 2,000 x 1,600 mm Fast Stroke Speed: 650 mm/sec Cushion Capacity: 160 tons Fsdpfx Asihf R Ushmeph Cushion Stroke: 400 mm Height Above Floor: 5,800 mm Distance Between Uprights: 3,400 mm Lateral Window: 1,600 mm

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2017, obratovalne ure: 67 h, moč vretenovega motorja: 22.000 W, največja hitrost vretena: 3.300 obr/min, potovalna razdalja osi X: 615 mm, pomik osi Y: 260 mm, pomik po osi Z: 1.585 mm, skupna masa: 16.600 kg, proizvajalec krmilnikov: MAZATROL, število osi: 5, This 5-axis Mazak INTEGREX i-200 S was manufactured in 2017. It features simultaneous 5-axis machining, a maximum machining diameter of Ø658 mm, and a maximum machining length of 1519 mm. The machine is equipped with a robust tool magazine holding 72 positions and includes both a main and a second spindle to expand its capabilities. If you are looking for high-quality turning and milling functions, you should consider the Mazak INTEGREX i-200 S turning-milling center. Contact us for further details. • Operating time: approx. 68 hours • Availability: Immediate • Key Features: • Full simultaneous 5-axis machining • Main spindle + sub spindle • Milling spindle with automatic tool changer • Complete turning and milling in one setup Fpsdoy Sltgspfx Ahmoh • Capacity and work area • Maximum swing: Ø658 mm • Swing over cross slide: Ø658 mm • Maximum machining diameter: Ø658 mm • Maximum machining length: 1519 mm • Bar capacity (main spindle): Ø102 mm • Bar capacity (sub spindle): Ø65 mm • Maximum support weight (main spindle): 650 kg • Maximum support weight (sub spindle): 300 kg • Main spindle (HD1) • Chuck size: 12" • Spindle bore: Ø112 mm • Motor power: 22 / 18.5 kW • Torque: 883.3 / 716.2 Nm • Acceleration time: 4.9 s • Air blower system: Included • Additional equipment: Heavy-duty spindle HD1; removal of standard spindle cylinder and chuck • Sub spindle (HD2) • Chuck size: 8" • Maximum speed: 5,000 rpm • Spindle bore: Ø76 mm • Motor power: 18.5 / 15 kW • Torque: 325 / 238 Nm • Acceleration time: 4.5 s • Factory option: HD2 spindle synchronization function • Milling spindle • Maximum speed: 12,000 rpm • Motor power: 24 kW • Cooling: oil & air • Tool interface: HSK-A63 (T63) • 90° indexing time: 0.5 s • Acceleration: 1.27 s • Lubrication: oil & air • Tool capacity: • O.D. turning tools: □25 mm • I.D. turning tools: Ø40 mm • Milling tools: Max Ø125 × 400 mm • Axis travel • W: 1574 mm • Rapid traverse: X/Z 50 m/min; Y 40 m/min; W 30 m/min • Tool system and magazine • Tool system: CAPTO C6 • Tool magazine capacity: 72 positions • Automatic tool changer: Included • Functions: tool breakage detection in magazine; overload detection • CNC functions and software • 5-axis machining package • 5-axis tool radius compensation • Cylindrical interpolation • Polar coordinate interpolation • Synchronous thread cutting with milling spindle • Cooling and preparation • Coolant through spindle: 7 MPa • Prepared for mist extraction system • Highlights • Practically new condition with only approx. 68 hours operating time • Very extensive factory configuration • Full simultaneous 5-axis machining • Main and sub spindle configuration • 72-tool CAPTO magazine • Production-ready with significant savings compared to new Additional Equipment • Chip and parts handling • Side chip conveyor - Consep type • Belt conveyor for parts • Bar loading and workpiece handling • LNS QLS II bar loader • Interface kit for bar loader • Automatic parts catcher • Filtration • SEI FILTRATION unit • Series: JT040 • Model: 40/70-V-I-R-FM • Year: 2018 • Other accessories • Mounting anchors for the machine • 3-color machine status signal light Technical Specification

Stanje: dober (rabljeno), CNC stružnica z Y-osjo Geminis Goratu - GHT-4 G4-800 Maks. premer struženja: 800 mm Fodpfoygv Euox Ahmoph Dolžina: 7000 mm Širina: 2500 mm Višina: 2500 mm Teža: 10.000 kg Prosimo, upoštevajte: Informacije na tej strani smo zbrali po najboljšem vedenju in vesti ter, kolikor je mogoče, od proizvajalca. Podatki so podani v dobri veri, vendar natančnosti ni mogoče zagotoviti. Zato to ni zavezujoča ponudba ali pogodbena določila. Priporočamo, da preverite vse pomembne podrobnosti.

Stanje: rabljeno, Leto izdelave: 2002, Maximum turning diameter: 300 mm Maximum turning length: approx. 550 mm Control: PC Fusion CNC 640 T Standard turning diameter: 276 mm Maximum swing diameter: 525 mm Distance from spindle nose to turret face: 115 – 690 mm Spindle speed range – main spindle: 35 – 4,000 rpm Drive power – main spindle: 22 kW Maximum torque: 351 Nm Spindle nose: A2-6" Spindle bore: 76 mm Maximum bar capacity: 64 mm Maximum chuck diameter: 250 mm C-axis: 360° Number of tool stations: 12 positions Tool holder: VDI 40 Shank diameter: 25 mm Drill shank diameter: 40 mm Turret indexing time: 0.2 / 0.6 sec. Speed range – driven tool positions: 25 – 4,500 rpm Drive power – driven tool positions: 3.7 kW Maximum torque: 35 Nm Speed range – sub-spindle: 35 – 4,000 rpm Drive power – sub-spindle: 7.5 kW Fpodpfx Ahexmagusmoh Maximum torque: 57 Nm Maximum chuck diameter: 150 mm X-axis travel: 190 (185 + 5) mm Z-axis travel: 575 (580 + 5) mm Sub-spindle (B-axis) travel: 585 (580 + 5) mm C-axis: 360° Rapid traverse X/Z: 30 m/min Rapid traverse C: 400 rpm Rapid traverse B: 18 m/min Feed range X/Z: 0 – 5,000 mm/min Feed range C: 1 – 2,000 °/min Total power requirement: 34 kVA Machine weight: approx. 5.9 t Space requirement: approx. 5.0 x 3.0 x 2.5 m CNC turning and milling center MAZAK – Super Quick Turn 250 MS - Main and sub-spindle - Driven tools - C-axis

Stanje: zelo dobro (rabljeno), Leto izdelave: 2014, We are offering a top-quality 3D scanner from GOM: GOM ATOS IIe Rev.01 Complete, ready-to-connect system including all cables. Please note: The PC has a password set, but the software is included on CD. Includes various sensor heads: Measuring volumes: Fpjdpfxew E I Its Ahmsh - Set 175x140 - Set 350x280 - Set 550x - Set 1000x800 Complete GOM PC in an aluminium case with Linux software, fully ready for operation with GOM ATOS IIe Software included on CD, steel scale bars with ATOS evaluation dongle Spare lamp Calibration panel (aluminium) CP20/MV 350x280mm²

Stanje: novo, Leto izdelave: 2021, Funkcionalnost: popolnoma funkcionalen, Stock machine "NEW" – available at short notice! (Subject to prior sale) CNC Control: Fanuc 0i-MF Plus, 10.4" with Manual Guide i & 2 MB NC memory LOOK-AHEAD function, 400 blocks Machine table: Table size: 950 x 550 mm Table load capacity: 800 kg T-slot width: 18 mm Number of T-slots: 3 T-slot distance: 150 mm Traverse ranges: Travel paths X/Y/Z: 860/550/550 mm Spindle nose to table surface: 150 - 700 mm Linear guides & speeds: Ball guides in X/Y axis Roller guides in Z axis Rapid traverse X/Y/Z: 40/40/30 m/min Feed rate for milling: 0 – 10,000 mm/min Minimum increment: 0.001 mm Tool magazine (CAM type) / changer: Number of magazine positions: 30 System: random Max. tool diameter: Ø75 mm Max. tool diameter with free adjacent slots: Ø150 mm (40 tools: Ø130 mm) Max. tool length: 300 mm Max. tool weight: 7 kg Spindle: Spindle taper: SK-40 Drive power (30min/contin.): 18.5/11 kW 15,000 rpm direct-drive spindle Spindle oil cooler Coolant, chip, and compressed air management: Coolant unit including 300-liter tank and pumps External coolant around the spindle Chip augers right and left in machine bed Compressed air nozzle at spindle (M32/M33) Compressed air through spindle (M38/M39) Compressed air and coolant gun Other features: Swiveling operating panel Electronic handwheel (wired) Central oil/air lubrication Fully enclosed guard Worklight Heat exchanger on electrical cabinet Auto-power OFF function Hand tool set Signal lamp Transformer 400 VAC, 50 Hz CE Declaration of Conformity per European guidelines Electrical and pneumatic requirements: Electrical connection: 36 kVA Required pneumatic supply pressure: 6 bar Dimensions: Machine size: W2,260 x D2,900 x H2,775 mm Required footprint: W3,160 x D3,000 x H3,000 mm (includes chip conveyor discharge to the left) Net machine weight: approx. 5,400 kg Available special equipment: Spindle: - Direct-driven spindle SK-40, 15,000 rpm Fpedpfx Ajifn N Njhmeh - Drive power (30min/contin.): 18.5/15 kW (FANUC motor) Tool magazine / changer: - Drum tool magazine with 30 positions, DIN69871, SK-40 Rotary or additional axes: - Preparation for 4th axis (FANUC control), incl. cabling and Harting connector, without axis drive Coolant, chip, and compressed air management: - Bed flushing - ICS high-pressure coolant pump, 20 bar, for direct-drive spindles - Including cartridge filter - Belt-type chip conveyor with chip cart (discharge at front to left side of machine) Measuring and monitoring systems: - RENISHAW OMP-60 probe with infrared transmission system for workpiece measuring, incl. probe holder, repeatability: 1μm - RENISHAW NC4+ laser tool measurement system and tool breakage control in machine, incl. bracket - Auto-door (side door) - Pneumatic interface for workpiece clamping - Clamping devices as shown With RoboJob Mill Assist 25kg (Year 2025 – NEW) - Fully enclosed - Double gripper Available immediately