Rabljeni horizontalni obdelovalni center, proizvajalec MAZAK, model PFH 4800

MAZAK PFH 4800

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2005, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 181756, potovalna razdalja osi X: 560 mm, pomik osi Y: 630 mm, pomik po osi Z: 600 mm, model krmilnika: Mazatrol 640M, število mest v zalogovniku orodij: 40, The machine is provided EXW – loaded free onto truck TECHNICAL DETAILS Travel range X-axis: 560 mm Travel range Y-axis: 630 mm Travel range Z-axis: 600 mm Distance pallet to spindle center: 80 – 710 mm Distance pallet center to spindle nose: 70 – 670 mm Table Pallet size: 400 mm x 400 mm Pallet load (evenly distributed): 400 kg Pallet surface: M16 × P2 Gjdpfx Aewgdnxsfqobg Indexing time: 1.3 s / 90° Feed Rapid traverse: 60,000 mm/min Feed speed: 1 – 60,000 mm/min Tool changer Tool holder: CAT No.40 Tool magazine capacity: 40 tools Max. tool diameter / length / weight: 95 mm / 360 mm / 12 kg Tool diameter with adjacent slot free: 150 mm Tool change time (chip-to-chip): 2.2 s Change method: random / shortest path Pallet change time: 5 s Number of pallets: 2 Coolant Coolant pump: 0.75 kW Coolant tank capacity: 500 l MACHINE DETAILS Footprint (L × W): 2,435 × 4,244 mm Machine height: 2,794 mm Machine weight: 11,400 kg Total power requirement: 66 kVA EQUIPMENT - Rotary pallet changer (5 sec. pallet change time) - 2 pallets - Chip conveyor - Manuals High-speed spindle (under inspection) Speed range: 35 – 15,000 rpm Spindle gear stages: 1 Motor power (15 min. / continuous): 30 kW / 22 kW Tool holder: 7/24 taper No.40 High-torque spindle (under inspection) Speed range: 35 – 12,000 rpm Spindle gear stages: 1 Motor power (15 min. / continuous): 22 kW / 15 kW Tool holder: 7/24 taper No.40

Stanje: zelo dobro (rabljeno), Leto izdelave: 2008, Control: Siemens 840-D Travel X: 1450 mm (longitudinal) Travel Y: 1100 mm (vertical) Travel Z: 1300 mm Pallet size: 800 x 1000 mm Table load capacity: 2000 kg NC rotary table with direct drive Positioning accuracy: 0.001° Max. rotary table speed: 60 rpm Rapid traverse: 60 m/min Spindle motor: 50 kW (25%) / 28 kW (100%) Spindle torque: 1210 Nm / 680 Nm Godsvgxfyopfx Afqjbg Spindle speed: 6000 rpm Spindle taper: HSK 100 Tool changer: 80 positions Max. tool diameter: 325 mm Max. tool length: 800 mm Max. tool weight: 35 kg Workpiece diameter: 1600 mm Workpiece height: 1400 mm Workpiece weight: 2000 kg Coolant through spindle Coolant shower Tool breakage detection in tool changer Spindle motor load monitoring Spindle extension by 100 mm Electronic handwheel The machine is supplied with many tools.

Stanje: dober (rabljeno), Leto izdelave: 2002, Control system HEIDENHAIN TNC 430 Spindle speed 20 - 9,000 rpm Godpfx Aswglfxofqebg Travels X = 500, Y = 400, Z = 400 mm Tool holder SK 40 Tool changer with 16 stations Rotary table with B and C axis Clamping area Ø 700 x 500 mm Max. table load 200 kg Infrared probe for workpiece measurement

Leto izdelave: 1999, Stanje: pripravljen za uporabo (rabljen), Travel path X/Y/Z: 1050mm/800mm/880mm, B-axis: 360°, table dimensions X/Y: 630mm/630mm, number of pallets: 2, max. workpiece weight: 1500kg, spindle speed: 7000rpm, tool holder: SK50, power: 30kW, tool stations: 80, max. tool diameter: 135mm/260mm, max. tool weight: 30kg, rapid traverse: 40m/min. Machine dimensions X/Y/Z: approx. 6400mm/2600mm/3200mm, weight: approx. 19700kg, control: Mazatrol 640M PC-Fusion-CNC. Includes double pallet changer for 630mm/630mm pallets. Documentation available. On-site inspection possible. Gedpfx Asvnd Susfqjbg

Stanje: rabljeno, Leto izdelave: 1999, Technical Details: X-axis travel: 3,500 mm Y-axis travel: 2,200 mm Z-axis travel: 1,200 mm C-axis: +/- 200° Control: Heidenhain TNC 426 Spindle speed (left rotation): max. 10,000 rpm Spindle speed (right rotation): max. 10,000 rpm Distance between columns: 2,500 mm Distance spindle / table (vertical): 1,230 mm Clamping area (table): 3,000 x 2,000 mm Table load capacity: 10 t Tool holder: HSK A 63 Feed rate (X/Y/Z): max. 20 m/min Compressed air: 8 bar Total power requirement: approx. 100 kW Machine weight approx.: 40,000 kg Machine dimensions: 18.0 x 6.0 x 5.8 m Gedpfju Nc Emox Afqobg 5-Axis Gantry Milling Machine Milling spindle: Manufacturer Hauser, type HS 256A-01 Uni, max. speed 10,000 rpm, direct drive Milling head: Manufacturer Hamül, fork-type design, A-axis integrated, rotation angle +/- 110° Tool changer: Manufacturer Hamül, rotary indexing table with turntable design, for 32 tool positions Chip conveyors: 2 piece(s) hinge-belt conveyor, manufacturer DGS with water tank, insert length 8,500 mm Combined oil-water chiller unit by BKW, type DL 55V-2KK, output 2.41 l/min, for hydraulic oil and spindle cooling Coolant system: Belt filter, manufacturer DGS, type SBF 150 Operation: via operator console type Heidenhain LE 426 X-, Y-, and Z-axis with Heidenhain linear encoders Handheld operating device HR 410 Hydraulic weight compensation (Z-axis) Equipment: Enclosure (protective walls with windows and safety doors) Hydraulic system Work area lighting

Stanje: rabljeno, Cisaille guillotine hydraulique STEINER type HTS 30/20 R N° de machine : 315 Année : 1982 Longueur de coupe : 3050 mm Épaisseur de coupe : 20 mm Butée arrière : 800 mm motorisée Puissance moteur : env. 30 kW Alimentation : 400 V, 50 Hz - Butée arrière avec commande de positionnement ELGO - Réglage de la butée arrière par vis à billes - Barrière immatérielle de sécurité SICK à l’avant comme protection contre l’intrusion - 3 bras-supports de tôle avec rouleaux à billes Gbedpfxed Hxx As Afqeg - Pédale électrique - Lames de rechange - Refroidisseur d’huile avec échangeur thermique à air - Machine très massive, construction très robuste Encombrement de la machine de base (L x l x h) : 4650 x 2610 x 3200 mm Poids de la machine de base : 27 000 kg Dimensions de transport (machine de base) (L x l x h) : 4650 x 2610 x 3200 mm Dimensions de transport (supplémentaire) (L x l x h) : 3500 x 2450 x 1400 mm Poids total : 27 000 kg Bon état Machine visible dans notre dépôt à 37235 Hessisch Lichtenau, essais de coupe possibles.

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, višina središča: 150 mm, skupna dolžina: 620 mm, Mechanics: All wear parts of the machine are replaced, including the infeed spindle on the X-axis. All assemblies are refurbished to a like-new condition. After overhaul, the machine is comparable to a new machine. Geometry: The machine is completely disassembled down to the guideways. Before the geometry of the individual tables and assemblies can be restored, both the X- and Z-axis guideways are hand-scraped and brought to a like-new condition. Upon completion, the machine receives a measurement protocol in accordance with the manufacturer’s specifications. Painting: After restoring the machine’s geometry, it is prepared for repainting. All covers, tables, and the machine bed are stripped of old paint, cleaned, and newly painted. Hydraulics: The entire lubrication system, including the lubrication unit, is replaced. The hydraulic unit is also completely overhauled. Conventional Internal Cylindrical Grinding Machine TSCHUDIN HTG 610I Machine Equipment: Technical Data: Centre height: 150 mm Centre distance: 680 mm Grinding length: 620 mm Machine weight and footprint: 2,500 kg // 2,340 x 1,445 x 1,900 mm Standard machine equipment: 1 pc. workpiece spindle headstock MK5 1 pc. operator panel 1 pc. mount for internal grinding spindle 1 pc. speed controller for belt spindle (UJ50 / UJ80) FISCHER 1 pc. hydraulic unit Godpourw Uyjfx Afqobg Optional: • 2-axis digital measuring system • Freely adjustable speed (1–800 rpm) incl. soft start (higher speeds available upon clarification of technical details) • Separate low-speed setting for part alignment

Stanje: novo, The KNUTH Sinus 400/1500 D is a robust universal lathe in the category of conventional lathes, renowned for its high machining efficiency. Featuring a one-piece, heavy cast iron bed and a spindle bore of 105 mm, this machine is ideal for machining long workpieces or large flanges. Technical highlights include a removable gap bridge for workpieces with diameters up to 1035 mm, high precision and smooth operation, as well as rapid traverse on two axes for quick positioning. Safety features such as overload protection and the automatic lubrication of the main spindle ensure reliable operation. The manual design provides a direct power transmission between the motor and the spindle, enhancing performance. If you are interested in the Sinus 400/1500 D, you can now submit an inquiry or obtain further information about this universal lathe in the category of conventional lathes. Gjdjq Rdp Aepfx Afqobg

Stanje: dober (rabljeno), Leto izdelave: 2000, obratovalne ure: 10.000 h, Funkcionalnost: popolnoma funkcionalen, stružna dolžina: 1.105 mm, premer struženja: 610 mm, največja hitrost vretena: 3.500 obr/min, izvrtina vretena: 70 mm, potovalna razdalja osi X: 580 mm, pomik osi Y: 210 mm, pomik po osi Z: 1.137 mm, montažni premer: 63 mm, največja hitrost vrtenja: 6.000 obr/min, vrsta vhodnega toka: Klimatska naprava, Oprema: vrtilna hitrost brezstopenjsko nastavljiva, The machine is in good condition. Major maintenance work in recent years: - 30.04.2020 Spindle overhaul CHF 35,000 - 16.07.2021 Software update (Wenk AG) CHF 1,600 - 20.06.2022 Central lubrication pump replaced CHF 400 (All prices are in CHF) Known defects: - Error message during startup - Coolant leaks out at the rear side of the milling spindle when internal cooling is activated - Overload message when the machine is cold and running at 100% rapid traverse - Over 150 various tool holders - Spare bushings for tool magazine - Spare limit switches for tool changer position monitoring - 2 pcs 3-jaw chucks, diameter 250 mm (installed during inspection) - 1 pc 3-jaw chuck, diameter 250 mm - 1 pc 3-jaw chuck, diameter 300 mm - 1 pc 4-jaw chuck, diameter 400 mm - 2 sets of hard jaws for external clamping, short version - 1 set of hard jaws for external clamping, long version - Several sets of used soft jaws - Spare filters for high-pressure system Kowap (5 pcs in stock, approx. 2 available at delivery—1 filter approx. CHF 20–25) - Coolant purification system or oil separator (custom-built) - Cabinet adapted to the tool magazine for KM63 holders, numbered with 80 slots Gbodpfx Afsxp Hmaeqsg - Specific clamping devices suitable for KM63 holders, providing direct clamping for indexable inserts - Iscar slot cutter suitable for a holder, D160 mm, width 4 mm - Gear milling cutter suitable for a holder (custom-built, for soft jaws p=1.5 mm) - Cleaning/deburring brush suitable for a holder We are happy to provide you with leasing and financing options for the machine. A viewing appointment can be arranged by mutual agreement.

Stanje: rabljeno, TECHNICAL DATA - Number of axes: 5 MILLING SPINDLE - Tool holder: SK 40 - Spindle drive power: 12 kW - Spindle speed: 12,000 rpm LINEAR AXES - Travel X/Y/Z axes: 510 x 510 x 460 mm SWIVEL AXIS A - Travel: [degrees] - Minimum increment: 0.001° SWIVEL AXIS B - Travel: 360° - Minimum increment: 0.001° TOOL CHANGER - Tool changer type: Bras chargeur - Number of tools in magazine: 40 TABLE - Table size: 400 x 400 mm - Max. table load: 300 kg - Max. machinable diameter: 500 mm - Max. machinable height: 405 mm PALLET CHANGER - Pallet size: 400 x 400 mm - Number of pallets: 2 ELECTRICAL SUPPLY - Supply voltage: 400 V - Total connected load: 50 kVA WEIGHT AND DIMENSIONS - Machine weight: 11,500 kg MACHINE HOURS - Operating hours: 32,763 h EQUIPMENT - Control: Mazatrol PC-Fusion 640 - Teach-in programming - Interfaces: RS232/RJ45/PCMCIA - Synchronized thread cutting - Coolant tank Gbjdpfx Ajuhbr Hofqsg * with high-pressure pump: 15 bar - Through-spindle coolant supply (IKZ) - Spindle cooling - Chip conveyor: MAYFRAN - Tool measuring probe