Laserski razrez

Mazak OPTIPLEX 3015 - CO2

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2022, obratovalne ure: 850 h, Funkcionalnost: popolnoma funkcionalen, stružna dolžina: 610 mm, premer struženja nad prečnim suportom: 500 mm, premer struženja: 725 mm, največja hitrost vretena: 5.000 obr/min, izvrtina vretena: 65 mm, potovalna razdalja osi X: 260 mm, pomik osi Y: 80 mm, pomik po osi Z: 610 mm, hitro pomikanje X-os: 30 m/min, hitri pomik os Y: 15 m/min, hitri pomik na osi Z: 30 m/min, dolžina podajanja os X: 260 mm, dolžina pomika po osi Y: 80 mm, dolžina podajanja os Z: 610 mm, vrtilni moment: 250 Nm, prehod palice: 65 mm, Oprema: dokumentacija / priročnik, vrtilna hitrost brezstopenjsko nastavljiva, For sale: As-new EMCO MAXXTURN 65-G2 SMY, year 2022, equipped with Siemens Sinumerik ONE with ShopTurn control! CNC turning center for complete machining of turned/milled parts. - Integrated spindle motors - Counter spindle, water-cooled (preloaded roller guides), with Y-axis on main and counter spindle - Latest control technology: SINUMERIK ONE with ShopTurn conversational programming. Main Spindle: • Max. bar capacity: 65 mm • Max. torque: 250 Nm • Speed range: 0-5000 rpm Counter Spindle: • Drive power: 22 kW • Max. torque: 130 Nm • Speed range: 0-7000 rpm Turret: • 12-position VDI 30 turret, radial, with direction logic for up to 12 driven tool holders Bjdpfx Absx E Dncjhjcu - Max. drive power: 6.7 kW - Max. torque: 25 Nm - Max. speed: 5000 rpm Y-axis: • Travel: +/- 40 mm • Hollow clamping cylinder incl. draw tube • C-axis for main/counter spindle • SINUMERIK ONE / OPERATE control • 22" multi-touch display • SHOPTURN • 3D simulation • Remnant detection • USB interface • Control cabinet air conditioning • Coolant system incl. coolant pump (3.5 bar) • Chuck wash (additional pump, 3.5 bar) • Parts ejector and coolant through counter spindle • Hydraulic unit • Interface for chip conveyor • Documentation and CE certificate Control language: German/English Electronic handwheel EMCO tool breakage and wear monitoring / SINUMERIK ONE Alternating spindle speed Counter spindle as tailstock: Enables the use of the counter spindle with installed live center for workpiece support. This allows shaft parts to be supported and machined, even on machines without a tailstock, using the counter spindle. Maximum thrust force is limited to 50% of the maximum axis force. EMCO PROFI-NET ROBOT INTERFACE: Interface for connecting robots (HARTING connector, Profinet communication, dual-channel/potential-free safety signals). Digitalization package for Sinumerik: Condition monitoring SIEMENS ONE interface for connection to MDE/BDE systems. Standard features include: • Machine on – AUX ON • Automatic mode • Production mode – program active • Program running and override between 95%–105% • Piece count pulse (M30) • Programmable pulse (M300) 3D machine data / MT65-G2: 3D machine data model included Pneumatically operated finished part catcher for gentle unloading of finished parts: Finished parts are transported either to a catch box (standard) or conveyor belt (optional). Max. finished part length: 175 mm Max. finished part diameter: 65 mm Max. finished part weight: 4.5 kg INTERFACE SL1200 HT65-DT/TT + MT65-1000: For connecting the SL1200 short bar feeder from EMCO. ...and more. Machine is available immediately!

Stanje: rabljeno, Linija za rezanje v traku SECO 60″ x 0,375″ x 50.000 lbs (A3791) je popolna rešitev za vzdolžno razrezovanje kovinskih kolutov na trakove z največjo debelino kovine 0,375” in največjo širino koluta 60”. Primerna za hladno in vroče valjano jeklo Širina traku: 18–60” Menjalnik z 2 prestavama, hitrost: 200–500 FPM Debelina materiala: 0,032″–0,375″ Kompletna linija vključuje naslednje komponente: Voz za uvajanje koluta v obliki črke L Max teža koluta: 40.000 lbs Navijalnik: Notranji premer koluta: 23–30,50” Zunanji premer koluta: max 72” Max teža koluta: 40.000 lbs Premična baza Hidravlično raztezanje Odlepilni in vpenjalni valj 5-valjčni ravnalnik koluta Vstopna nastavljiva bočna vodila Vstopne škarje za rezanje odvečnih robov Glava za rezanje: 10” vretena 40 KM motorni pogon 2 navijalki za odpadne trakove Navijalka: Zunanji premer koluta: max 72” Notranji premer koluta: 24” 150 KM DC motor 3-kraka obračalna roka na izhodu Nosilnost na roko: 40.000 lbs Motoriziran obračalni mehanizem Bjdpfx Abjtiy Ntshecu Kompletna linija z noži, gumo in distančniki Upravljalna omara, hidravlika in elektrika

Stanje: novo, ⭐⭐⭐⭐⭐ (5.0) ⚡️ Top service ⚡️ Fast delivery ⚡️ Excellent support! ✈️ 12-week delivery ✈️ ✅✅✅ Energy efficiency class A+++ ✅✅✅ ✳️Maintain your liquidity! We offer a wide range of financing models to ensure your investment has the best chance of success. Contact us today to learn more about our hire-purchase, warranty, or leasing programs.✳️ ➖➖➖➖➖ Bodpfx Asfggcwjbhocu ►►►⌛⏰ FASTEST delivery times! ⌛⏰◄◄◄ ✨✨Buy direct from the manufacturer and secure price and quality advantages!✨✨ Benefit from Proton’s 40 years of expertise in surface coating technologies. ➖➖➖➖➖ ☀️ 2-YEAR WARRANTY ☀️ ✅The Multi-Treat spray pretreatment machine is used for surface treatment of materials to be painted. Depending on the process, it enables handling up to 8 different chemicals with a variable number of tanks. All tanks are made from 316 stainless steel and are insulated. The number of tanks and heated tanks is determined according to your process requirements. ✅Tank heating is provided via gas heat exchangers. All processes can be monitored and both time and temperature for each stage can be set via the PLC touchscreen. ✅Any faults that occur in the system can be tracked via the control panel. Automatic float switches are installed in each tank; if the water or chemical level is too low, the system automatically stops and replenishes fluid by transferring between tanks, ensuring safe operation. ✅A drip tray is installed under all tanks, manufactured from 316 stainless steel. The tanks are made of 2 mm thick 316 stainless steel. The material is penetration-tested and the tanks are argon-welded and sealed. Grates in the tanks prevent debris from reaching the pumps. The interior of the cabin is made from 304 stainless steel sandwich panels, while the exterior is powder-coated sheet. ✅Panel thickness is 80 mm, made from polyurethane-filled stainless steel panels. PPT ring pipes and nozzles ensure long service life. ✅Thanks to the steam extractor fan, steam is prevented from escaping into the work area. The wash station doors are designed like containers and feature silicone seals. The movable washing platform inside the cabin moves back and forth to wash the materials. Hoses are carried by a mobile support system. Each process has separate pumps and a waste pump for draining liquids from the tanks. The draining pump is connected to the chemical drain tank. ✅Manual spray guns are available for each process for manual applications. The system features a manual pre-treatment mode. Drip time and process duration can be set using the PLC panel. Drip time applies to manual operation.

Stanje: rabljeno, diameter various quantity 56x Bcsdpfx Abewtrzyehou mounting BT 40

Leto izdelave: 2013, Stanje: pripravljen za uporabo (rabljen), The following units are available: one Rehm Invertig Pro 350 AC/DC and one Rehm Invertig Pro 450 DC, both used and in good condition. 1) Invertig Pro 350 AC/DC Standards: IEC 60 974-1, IEC 60 974-2 Welding current range (TIG): 3–350A Output voltage U₂ (at maximum current): approx. 24V Open circuit voltage U₀: approx. 91V Duty cycle (DC): 100% (for TIG at 350A) Mains voltage/input: 3-phase, 400V, 50Hz Protection class: IP 23S, safety class S Adjustment range: 3–350A (TIG) for AC/DC version Duty cycle: 100% at 40°C, 350A (TIG), 100% DC Input fuse: 32A at 3x400V for the 350 AC/DC version Dimensions: length 520mm, width 360mm, height 460mm Weight: 29.5kg (AC/DC version) 2) Invertig Pro 450 DC Standard: IEC 60 974-1 Welding current range (TIG): 3–450A Output voltage U₂ at maximum current: approx. 28V Open circuit voltage U₀: approx. 91V Duty cycle (DC): 100% at 450A (TIG); for electrode welding, duty cycle is lower (approx. 60%) Mains/input: 3x400V, 50Hz Protection class: IP 23S Duty cycle at 100% DC, 450A (TIG) at 40°C Bjdpfx Aoxddamebhscu Electrode welding current: approx. 360A at 100% DC (electrode) for the 450 DC version Power/input fuse: 32A at 400V (three-phase) for the 450 versions Dimensions: length 520mm, width 360mm, height 460mm Weight: approx. 28kg On-site inspection is possible.

Stanje: rabljeno, Leto izdelave: 2008, Used drilling center by CMA Bodewc Ndwepfx Abhecu Model: TRD 40 CN 9000 Table length: 9000 mm Maximum capacity: 40 mm Automatic tool changer Year of manufacture: 2008

Stanje: dober (rabljeno), Leto izdelave: 2000, obratovalne ure: 83.000 h, vpenjalna sila: 350 kN, premer vijaka: 25 mm, For sale is an injection moulding machine from the manufacturer Arburg, model 320S 350-60. Year of manufacture: 2000 Operating hours (automatic mode): 83,000 Screw diameter: 25 mm Clamping force: 350 kN Cylinder length: 60 Transport can be organised Europe-wide upon request and for an additional fee. Bcsdpfx Aohhuq Ajbhou Price incl. VAT Machinery purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINERY AND MORE Are you looking for a high-quality yet cost-effective metalworking machine for your production? Or are you interested in selling your own? For further information or contact options, please visit our website.

Stanje: novo, Leto izdelave: 2025, Ustrezni material: kovina Stanje: novo Tip laserja: vlakenski laser Delovna površina: 3000 × 1500 mm Hitrost rezanja: 0–40.000 mm/min Podprti grafični formati: AI, BMP, DST, DWG, DXF, DXP, LAS, PLT Debelina rezanja: 0–30 mm CNC: Da Način hlajenja: hlajenje z vodo Krmilna programska oprema: Bodor Thinker Država porekla: Kitajska Blagovna znamka: Bodor Certifikati: CCC, CE, GS, ISO, SGS Blagovna znamka laserskega vira: Bodor Blagovna znamka laserske glave: bodorgenius Blagovna znamka krmilnega sistema: bodorpro Teža (kg): 2.200 kg Ključna prodajna prednost: posteljna konstrukcija s tenonsko-utorjenim varjenjem pločevine Bcsdpfx Abeg Eghdohju Garancija: 3 leta Moč laserja: 1000 W Napajanje: 110V / 220V / 380V 50/60 Hz

Stanje: novo, Automatic Mitre Saw UK-450 Bjdod A Ttxspfx Abhjcu - Saw blade diameter: 450 mm - Processing length according to customer specifications - Automatic positioning - Automatic mitre adjustment (up to +/- 60°) - Applications: Wood, plastic, and aluminium processing - Infeed conveyor as smooth track (optional roller conveyor available) Further technical details and information available on request.

Stanje: dober (rabljeno), Leto izdelave: 2022, CNC Lathe Manufacturer: DMG MORI Machine Model: CLX 350 V1 Control: SLIMline 0i-F Plus Fanuc Touch Year of Manufacture: 2022 Controlled Axes: X / Z TECHNICAL DATA Turning length: 540 mm Spindle: Motor spindle 11/16 kW Bcjdsw Hxi Djpfx Abhou Tool mounting: VDI30, 12 positions Main spindle: AC motor - Speed: up to 5,000 rpm - Spindle nose: Main spindle A2-6" - Drive power (100/40% duty cycle): 11 / 16.5 kW Turret: 12-position - Driven: 12 stations - Toolholder: VDI 30 FEATURES + Technology cycle for applying alternating spindle speed for vibration-sensitive clamping + Direct measuring system X-axis + Programmable positioning and pressure force + Ergonomic DMG MORI SLIMline® operator panel + Hollow chuck cylinder, max. bar capacity D65 mm + Tailstock, hydraulically traversable via M-function + External electronic handwheel + Chip disposal package: - Chip conveyor with right-hand discharge instead of chip tank + 4-color signal lamp + Differential pressure chucking for main spindle + Foot pedal for tailstock + Automatic NC tailstock for maximum machining flexibility – full control of force within range 0.7 – 3.5 kN + High-pressure pump 12 bar + Coolant spray gun 5 bar + Manual tool measurement device in work area, make MARPOSS + Mechanical oil mist separator type AFS 600 Technical data and specifications may be subject to changes and errors.