Rabljeni CNC stružnica proizvajalca MAZAK, model MULTIPLEX 6300

MAZAK MULTIPLEX 6300

Stanje: rabljeno, Leto izdelave: 2007, Nihajni premer 430 mm Razdalja med vreteni 1450 mm Krmiljenje MAZATROL 640T X-os 310 mm Z-os 605 mm Hitrost vretena 4.000 min⁻¹ Klsdpfx Afsyb S Nre Nsl Po naši oceni je stroj v dobrem rabljenem stanju in ga je mogoče po dogovoru videti pod napetostjo. Tehnične značilnosti in dodatki: - Gantry loader Dodatna oprema, prikazana orodja in vpenjalne naprave so vključene v obseg dobave le, če je to navedeno v dodatnih informacijah. Pridržujemo si pravico do sprememb in napak v tehničnih podatkih in navedbah ter vmesne prodaje!

Stanje: rabljeno, Leto izdelave: 2000, x-axis travel 3,700 mm y-axis travel 3,050 mm z-axis travel 1,000 mm Control unit HEIDENHAIN TNC-430 PA Distance between columns 2,300 mm Spindle nose to table surface 1,175 mm Rapid traverse x/y/z 25,000 mm/min Kjdpowg Hrgofx Af Noll Working feedrate 15,000 mm/min Tool holder ISO-50 - DIN 69871 Table load capacity 20,000 kg Spindle motor 37 kW Milling head - swiveling + / - 45° Milling head B-axis 360,000 positions Tool changer 30 stations/tools Chip conveyor incl. Internal coolant supply 20 bar Table size 4,000 x 1,800 mm Machine weight approx. 42 t KPU-4000 AR

Stanje: dober (rabljeno), Leto izdelave: 2014, Funkcionalnost: popolnoma funkcionalen, The machine is in good condition. It is powered up and can be inspected by appointment. Available: immediately Year of manufacture: 2014 Commissioning: January 2015 Operating hours: → see picture Machine number: 252 153 Control system: Matrix II Travel X1/X2: 310 / 310 mm Rapid traverse X1/X2: 24 / 24 m/min Travel Y1/Y2: ±77 / ±77 mm Rapid traverse Y1/Y2: 10 / 10 m/min Travel Z1/Z2: 605 / 605 mm Rapid traverse Z1/Z2: 24 m/min Drive power: 19.5/22 kW Max. spindle speed: 4,000 rpm Tool turret: 2 x 12 stations Driven tool speed: 4,000 rpm Driven tool power: 7.5 kW Dimensions: 7,723 x 4,313 x 3,335 mm (L x W x H) Weight: 12,200 kg Voltage: 400V Fuse protection: 80A Note: The machine comes standard with the “Relocation Detector.” Upon recommissioning, the machine must be unlocked by Mazak. Options: - Y-axis - Gantry loader GL200F - Air blast device for workpiece transfer - Chip conveyor, rear discharge - Cylindrical and polar interpolation (EIA) - High-pressure pump and return pump (original pumps included) Accessories HD 1: - Kitagawa B-210 power chuck - 3 turning tool holders - 3 boring bar holders - 1 axial milling and drilling head - 1 radial milling and drilling head - 4 covers Accessories HD 2: - Kitagawa B-210 power chuck - 3 turning tool holders - 3 boring bar holders - 1 axial milling and drilling head - 1 radial milling and drilling head - 4 covers Kodpfx Afoi Ik Hks Njll Price: EXW Incoterms (loaded onto provided truck) Additionally, we are offering a set of tool holders for this machine (see last image). Note: Separate item, not part of the machine offer. Consisting of: Static holders: 2 pcs. external turning holders 13 pcs. facing holders 3 pcs. cut-off holders 5 pcs. boring bar holders Ø 32 2 pcs. boring bar holders Ø 40 8 pcs. boring bar holders Ø 50 23 pcs. reduction sleeves Driven tools: 2 pcs. axial drilling and milling heads SK40 8 pcs. radial drilling and milling heads SK40 3 pcs. radial drilling and milling heads ER40 5 pcs. swivel heads The new price of the entire package was approx. €85,000.00 Available: after sale of the machine Price (negotiable): €35,000.00 (Incoterms EXW, excluding transport)

Stanje: rabljeno, Leto izdelave: 2004, Mazak Multiplex 6300 Mazatrol 640T Leto izdelave: 2004-11 Kledpfx Afov Tvkae Njl Približno 20 orodij Mazak Flex-GL200F Več informacij sledi kmalu.

Stanje: rabljeno, Leto izdelave: 2001, x-travel 2050 mm y-travel 1100 mm z-travel 800 mm Control: Fanuc 18iM Super Cap II Spindle speed: 60-6000 rpm Tool magazine: 60 positions Kedpsrw Dknofx Af Nsll Tool holder: BT50 Total power requirement: 26 kW Machine weight approx. 23.6 t Space requirement approx. 6.3 x 3.3 x 3.8 m The machine will be available for loading from 03/2024! Description X-axis: 2050 mm, Y-axis: 1100 mm, Z-axis: 800 mm, spindle speed: 60-6000 rpm, Number of tool stations: 60, tool magazine: BT 50, drive power: 22/26 kW, Grid size: 250 mm, control: FANUC 18iM Super CAP II with 10.4-inch display, Length: 6250 mm, width: 3300 mm, height: 3800 mm, weight: 25 t, equipped with High Precision Contour Control, Central lubrication system upgraded (2005), axes (X-Y-Z) upgraded to linear scales (0.001), Memory expansion 128 Kbyte, tool correction memory (200 pcs.), High Speed Remote Buffer, Extraction via HEPA filter system, upgraded to high-pressure internal coolant supply 20 bar and zero-point clamping system with 16 chucks each.

Leto izdelave: 1990, Stanje: dober (rabljeno), številka stroja/vozila: 92041, Table clamping surface: 410 x 900 mm Travel paths (X/Y/Z): 560 / 410 / 380 mm Spindle taper: SK 40 Spindle speeds: 22 - 6000 rpm Feed rates: X and Z up to 10,000 mm/min, Y up to 240 mm/min Required space: 2,600 x 2,000 x 2,300 mm Weight: 3,500 kg Kljdpfx Aodhhprsf Nol

Stanje: rabljeno, Leto izdelave: 2008, Article: Vertical Turning and Grinding Center Brand: EMAG Model: VSC 250 DS Year of Manufacture: 2008 Control: SIEMENS 840D Kjdpfjia Rtdjx Af Njll Grinding Spindle Speed: 30,000 rpm Turning Spindle Speed: 3,000 rpm Turret Tool Stations: 12 Cooler for spindle and machine bed cooling Coolant lifting station (no independent coolant supply) Chip conveyor Parts handling system Air through the spindle Two clamping circuits through the spindle (air and oil) Unfortunately, the grinding spindle is defective. However, it can be overhauled by a spindle repair shop. Otherwise, the machine is in very good condition and fully operational. Please contact us for further information and pictures via mail(at) or

Stanje: rabljeno, Leto izdelave: 2008, Obrat nad posteljo 923,8 mm Obrat nad prečno sani 755 mm Maks. premer struženja 356 mm Maks. dolžina struženja 510 mm X/Z pomiki 260/590 mm Vretenasti obrati 5000 obr/min Revolver z 12 postajami Premer vretenaste luknje 73 mm Krmiljenje: MSX-850 III Opremljeno z: Vpenjalna oprema s kleščami Kljdpfsu Sn Hzsx Af Nsl Odvajač odrezkov 3 standardni nosilci za orodje Brez portalnega nakladalnika (ni vključen).

Stanje: rabljeno, Leto izdelave: 2009, Offered here is a used machining centre from the manufacturer Deckel Maho DMG. The machine is under power and can be inspected at our facility. Ex works, loaded on truck Manufacturer: DMG Deckel Maho Model: DMC 125 H duoBlock Year of manufacture: 2009 Control: Siemens 840 D Solutionline (PCU 50) Technical data: Travel X, Y, Z axes: 1250 x 1000 x 1000 mm Feed rate X, Y, Z axes: 20 - 60,000 mm/min Rapid traverse X, Y, Z axes: 60 m/min B-Axis travel: 360 x 0.001° B-Axis feed rate: 10,800°/min Max. table rotation speed: 30 rpm Spindle speed: 20 - 8,000 rpm Gear ranges: 2 Max. workpiece diameter: 1,250 mm Max. workpiece height: 1,580 mm Clamping area: 800 x 800 mm Max. workpiece weight: 1,500 kg Pallet weight: 570 kg Max. permissible weight difference for pallet loading: 1,000 kg Tool holder: SK 50 according to DIN 69871 Maximum tool length: 650 mm Tool magazine: 120 positions Transport dimensions: 6,500 x 3,000 x 3,200 mm Transport weight of the machine (without magazine or other accessories): approx. 20,000 kg Required space: approx. 7,000 x 6,000 mm Total weight of the machine: 24,000 kg Accessories: - Chip conveyor with coolant tank - Coolant system - 4x machine pallets - Tool magazine Kledjw Ew T Sjpfx Af Nol - Oil mist extraction - Various new spare parts: 1x Y-axis length measuring system (new) 1x lubrication unit 230V 0.12 30bar (new) 1x gear unit P-AGG*MKF1-KW2-20036 (new) 1x Cyclo gearbox F1C-A25 (new) 1x retrofit kit power module (new) 1x lifting devices for the machine

Stanje: zelo dobro (rabljeno), Leto izdelave: 2019, Funkcionalnost: popolnoma funkcionalen, MAZAK QT COMPACT 200MYL 500 U leto izdelave 2019 MAZATROL SmoothC Maksimalni premer struženja: 340 mm Maksimalna dolžina struženja: 535 mm maks. hitrost: 5.000 min⁻¹ C-os: 0,0001° Vreteno: A2-6 Premer prehoda vretena: 65 mm Revolver glavnik 12 postaj za orodje 12 pogonskih postaj za orodje Moč glavnega vretena za rezkanje: 5,5 kW Kodpfsxzd Sqjx Af Njll maks. hitrost rezkanja: 4.500 min⁻¹ Pomiki: X-os: 215 mm Z-os: 605 mm Y-os: 100 mm Konik: 565 mm Hitro pomiki X/Y/Z: 30/10/30 m/min Merilna sonda Vmesnik za podajalnik palic NC konik 3-čeljustna glava Kitagawa BB208, premer 210 mm Set nosilcev za orodje, 8 fiksnih + 4 pogonski 2/2 Transporter za odrezke ConSep