VERTIKALNI OBDELOVALNI CENTER

MAXIMART Q-13

Stanje: zelo dobro (rabljeno), Leto izdelave: 2014, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 6.000 mm, pomik osi Y: 3.200 mm, pomik po osi Z: 1.400 mm, dolžina mize: 6.000 mm, širina mize: 3.000 mm, največja hitrost vretena: 24.000 obr/min, razdalja med stojali: 4.000 mm, Tehnični podatki • Pritrdilna površina mize: 6.000 × 3.000 mm • X-os (podolžna pomičnost): 6.000 mm • Y-os (prečna pomičnost): 3.200 mm • Z-os (vertikalna pomičnost): 1.400 mm • Razdalja med stebri: 4.000 mm • Pomik: 30.000 mm/min Gkedpfx Asxlip Aob Tsf • Obremenitev mize: 4000 kg/m² • Največja hitrost vretena: 24.000 1/min • Največja moč vretena (S1-100%): 42 kW • Največji navor vretena (S1-100%): 67 Nm • Vpenjalo orodij: HSK63A • Menjalnik orodij: 24 pozicij • C-os: ±360° • A-os: +95° / -110°

Stanje: rabljeno, Leto izdelave: 2015, številka stroja/vozila: 5319, potovalna razdalja osi X: 8.000 mm, pomik osi Y: 2.600 mm, pomik po osi Z: 1.300 mm, BASE MACHINE PowerSpeed 5 WITH FORK HEAD – TECHNICAL DATA Travel ranges: X-axis: 8,000 mm Y-axis: 2,600 mm Z-axis: 1,300 mm Machine Bed (X-axis): Flat-bed design with 1,000 mm guideway width. Two electric motors drive a centrally mounted rack. Hardened compact linear guides ensure high precision. Machine Column (Y-axis): Welded steel construction with 900 mm guideway width. Two liquid-cooled feed motors and two measuring systems provide dynamic performance and accuracy. Protection is provided by telescopic steel covers. Spindle Slide and Spindle Head: Made from GGG 60 cast iron, guided by compact linear bearings. Optimal power transmission via long guideways and tight arrangement of the Y and Z axes. Dual Ball Screw Drive: Two vertical ballscrews with separate drives and measuring systems for high dynamics and long-term accuracy. Drive System: Digital individual drives with AC motors. Feed and rapid traverse range: 2–30,000 mm/min. Acceleration: 3.5 m/s². Measuring System: Direct, non-contact linear measuring systems for high manufacturing accuracy. Automatic 2-Axis Fork Head with Motor Spindle: A-axis: 764 Nm (100% duty cycle), ±105°, clamping torque 2,160 Nm, accuracy ±5" C-axis: 810 Nm (100% duty cycle), ±200°, clamping torque 3,024 Nm, accuracy ±3" Motor Spindle: HSK-A 63, up to 18,000 rpm, 89 Nm (100% duty cycle), internal/external coolant supply up to 70/20 bar, liquid cooled Electrical Equipment: 400/230 V, 50 Hz, 80 kVA connected load. Control cabinet (IP54) with control and switching devices. Cable length machine-to-cabinet: 5 m. Control Cabinet Cooling: Dual-chamber system with automatic internal air cooling and dehumidification. Lubrication: Central lubrication for guides, permanent grease lubrication for main spindle, oil mist lubrication in milling head. Energy Supply: Compressed air 4–6 bar, G ¼ connection, with filter pressure regulator and condensate separator. Control System: Siemens 840D sl with swiveling operator panel. Wireless handwheel with LCD display, potentiometers, and buttons for axes, feed, and spindle. Remote Maintenance: Fault diagnosis via alarm manager, notification by email/SMS (SIM card and network required). TightBlock Machine Base (X = 8,000 mm): Heavy composite construction for vibration damping. Foundation recommendation: ≥100 mm thickness per 1,000 mm X travel range, structurally verified. Coolant System: Gjdpfx Ajwdub Dob Tekf 500 l tank, filtration system

Stanje: rabljeno, Leto izdelave: 2009, obratovalne ure: 6.000 h, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 800 mm, pomik osi Y: 600 mm, pomik po osi Z: 500 mm, model krmilnika: Heidenhain iTNC530, največja hitrost vretena: 36.000 obr/min, GF Mirkon XSM600U X: 800 mm Gkjdpfjwa R A Nox Ab Tsf Y: 600 mm Z: 500 mm A-axis: +30° / -100° C-axis: 360° continuous Spindle HSK50: max. 36,000 rpm, 25 kW Handwheel HR410 Tool changer: 60 positions Rotary table including 3R clamping system Chip conveyor Coolant system with 20 bar through-spindle coolant (IKZ) Tool measurement system: Blum Laser 3D probe: M&H Pallet automation with 21 pallets – pallets are not included in the scope of delivery The machine is offered on behalf of the customer!

Stanje: dober (rabljeno), Leto izdelave: 2002, številka stroja/vozila: 120K587, Good day, We are offering for sale a well-maintained Quaser MV204II universal CNC milling machine with HEIDENHAIN control at an unbeatable price-performance ratio. The purchase price includes: tool changer, touch probe, chip conveyor, coolant system, hydraulic system, documentation / machine manuals, etc. Gedjpfawhjpfx Ab Tokf Machine dimensions: Height: 2,825 mm Width: 2,650 mm Length: 2,200 mm Weight: 7,500 kg Travel distances: X-axis travel: 1,020 mm (feed rate 32,000 mm/min) Y-axis travel: 600 mm (feed rate 32,000 mm/min) Z-axis travel: 560 mm (feed rate 32,000 mm/min) Milling table data: Table size: 635 x 1,200 mm Table load capacity: 1,000 kg Table configuration: 6 x 18 mm (width), H8 T-slots Spindle data: Maximum spindle speed: 7,500 / 10,300 rpm Maximum spindle torque: 252 Nm All further data available upon request! Short-term viewing appointments possible. Best regards

Stanje: rabljeno, Leto izdelave: 2016, Travel distance - X: 800 mm Travel distance - Y: 450 mm Travel distance - Z: 510 mm Control: HEIDENHAIN TNC620 Table dimensions (L x W): 1,000 x 450 mm Number of tool changer positions: 30 Vertical machining center | DOOSAN DNM 4500 equipped with 30-position tool changer, through-spindle coolant system (IKZ), and chip conveyor. The machine has only 5,365 spindle hours. Godpfewq S Alsx Ab Tokf The machine is in well-maintained condition. A video of the machine at its current location is available upon request. Technical data of the machine will follow shortly. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: DNM4500 | DNM-4500

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2012, obratovalne ure: 6.589 h, Funkcionalnost: popolnoma funkcionalen, We are selling a beautiful POSMILL E1100 machining centre, year of manufacture 2012. The machine has low spindle hours (6,589) and was used for single-part production. The machine is under power at the handover location and ready for demonstration. Technical data: X-axis: 1,100 mm Y-axis: 600 mm Z-axis: 510 mm Spindle/table distance: 120–630 mm Table dimensions: 1,300 x 600 mm Control: ITNC 530 - ITNC 530 control - Tool measurement system 35.1 - Workpiece measurement with probe - Linear measuring system on all axes - ICS (internal coolant supply) for internal machining - Various tools with holders - Chip conveyor Gkedpswkhy Tofx Ab Tsf - Filtration system - Workshop trolley with holders - Machine vice

Stanje: rabljeno, Maximum turning diameter: 360 mm Turning length: 505 mm Control: Mazatrol SmoothC Maximum swing diameter over bed: 660 mm Maximum swing diameter over cross slide: 255 mm Maximum bar capacity: 80 mm Spindle speed range: 35 - 4000 rpm Spindle torque: 358 Nm X-axis travel: 225 mm Rapid traverse X-axis: 30 m/min Z-axis travel: 605 mm Rapid traverse Z-axis: 33 m/min Spindle nose: A2-8'' Spindle bore: 91 mm Through-spindle diameter: 80 mm Milling spindle speed (driven tools): 5000 rpm Maximum torque on milling spindle: 47 Nm Drive power - milling spindle: 5.5 kW (40% duty cycle) Tailstock quill taper: MT 5 Tailstock travel: 565 mm Maximum axial pressure: 5.0 Nm Tool turret: 1 Number of tool stations: 12 (driven) Turning tool shank cross-section: 25 x 25 mm Tool holder: BMT Compressed air connection: 5 / 160 bar / l/min Operating voltage: 400 V Coolant tank capacity: 180 l Motor power: 18.5 kW (30 min operation) Nominal power (100% continuous operation): 15 kW Machine weight: approx. 6 t Space requirement: approx. 3.6 x 2 x 1.8 m Machine includes the following special accessories: - Chip conveyor (right side) - Productivity Package C – special according to stock machine This package includes: - High-performance coolant system (1.1 kW), max. flow rate 17.6 l/min - Preparation for chip conveyor (side) - Automatic tool eye Standard equipment: - Transformer for the European market - Use of linear guideways with guide carriages - SD MEMORY I/F (1P) + USB MEMORY I/F (1P) - 1 x USB memory interface (1 slot) - Spindle bore: 91 mm - Set of manuals in electronic form on CD - Mazak standard colour - CE marking, metric, 50 Hz - C-axis input accuracy: 0.0001° - NC-controlled tailstock - Tailstock pressure adjustment - Tailstock with fixed quill MT5 Safety devices: - Operator door with interlock switch - Double foot switch - Hydraulic pressure interlock - Fully enclosed work area - Work area lighting - Safety precautions to global standard Coolant supply: - Grundfos coolant pump, type MTA (0.25 kW / 7.6 l/min) - Complete coolant system - Automatic shut-off via protective circuit trigger Measuring system: - Absolute positioning system CNC: - Synchronous tapping with milling spindle - Relocation detector - Mazatrol SmoothC - 10.4" colour display - User macro (600 variables) - EIA/ISO input function - Background toolpath simulation - Thread cutting function (G33) - Polar coordinate input (EIA) - Direct drawing data input - LAN interface - Various tool holders Gkjdpov Dxw Rsfx Ab Tjf - All dimensions, weights, and performance data are approximate and non-binding. - Used machine sold without warranty -

Stanje: rabljeno, Leto izdelave: 2001, Technical specifications: Tool holder: SK 40 Travel distances: X-axis: 530 mm Y-axis: 450 mm Z-axis: 450 mm Maximum tool weight: 260 kg Spindle speed: 12,000 rpm Maximum table load: 380 kg Godpfot Hr Ahex Ab Tekf Weight, approx.: 6,500 kg Dimensions (LxWxH), approx.: 2,000 x 2,200 x 2,400 mm Equipment: - Heidenhain TNC 430 control - 4th axis by SMP (France)

Stanje: rabljeno, Leto izdelave: 2015, Technical Details: X-axis travel: 960 mm Y-axis travel: 600 mm Z-axis travel: 480 mm Rotary table: D 350 mm Table load capacity: 200 kg Spindle speeds: 12,000 rpm Spindle motor power: 14/10 kW Control system: HEIDENHAIN iTNC 530 Rapid traverse: 32 / 32 / 24 m/min Tool changer: 30 positions Spindle taper: ISO BT 40 Machine weight approx.: 7.4 t Total power requirement: 45 kVA Space requirement approx.: 3.1 x 2.3 x 3.1 m 5-axis simultaneous universal machining center, NC rotary-swivel table D 350mm, A-axis (120/-42°), C-axis 360°, Through-spindle coolant (IKZ), Electronic handwheel, Chip conveyor, Direct measuring system, Gkodpfx Asrm Txbsb Tjf Operating hours: approx. 9,000 power-on hours, approx. 3,500 spindle hours

Stanje: zelo dobro (rabljeno), Leto izdelave: 2014, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 67027, Proizvajalec: ZAYER, Tip: GMCU 6000-AR, Leto izdelave: 2014, Serijska št.: 67027, 6-osni, Gedpfx Asw Iy Hlob Tokf Površina mize: 7000*2500*300 mm Širina med stebri: 3800 mm Hodi (X/Y/Z): ca. 6000/4500/1250 mm, 45° univerzalna rezkalna glava Ravna rezkalna glava Orodno vpenjalo SK50, Menjalnik orodij za 60 orodij, Krmilna omara HEIDENHAIN iTNC 530, Transporter ostružkov TECNIMETAL, Hladilni sistem, Varnostna ograja s svetlobnimi zavesami LENZE