Ogrevalni sistem

Mawera FSB1100

Stanje: rabljeno, Leto izdelave: 2001, Wood processing dimensions: Infeed lengths min/max: 500 - 6500 mm Full optimization up to max: 1500 mm Infeed widths min/max: 40 - 300 mm Infeed thicknesses min/max: 15 - 120 mm Max. wood cross-sections: 300 x 40 mm or 200 x 120 mm Fixed lengths after saw min: 510 – 2800 mm Special application: Cutting blocks, min/max length: 100 – 200 mm (Note: Multiple block lengths during sorting; blocks are conveyed to the end of the sorting line and fall into customer-supplied mesh boxes) Cutting/trim tolerance: +/- 0.8 – 1.5 mm (depending on timber quality with minimal resin content and uniform surface. Tolerance up to 1 m fixed length; maximum tolerance for longer parts up to 2.5 m). Thickness tolerance: +/- 3 mm Wood curvature in all directions: max. 10 mm per meter length Wood species: Softwood or hardwood System performance: Feed speed, steplessly adjustable up to max. 230 m/min Cutting cycle: 0.6 – 1 s To determine actual daily output, an efficiency factor dependent on the customer’s production conditions must be applied. Working height infeed and saw: 900 mm (to be placed on customer-side platform; saw requires concrete base) Bledpfew Sy T Hox Afnsd Sorting working height: 2000 mm Connection data: Total electrical connection load: approx. 18 kW Operating voltage: 380 Volt / 50 Hz Voltage fluctuations max. 5 % Air consumption: approx. 1200 NL/min Operating pressure: approx. 8 bar Extraction speed: approx. 30 m/s Paint finish: pebble grey RAL 7032 and blue NCS 5030-R 80 B POSITION OVERVIEW: Pos. 1: Infeed and marking station with 1 adjustable side support table, 1 table as stop edge Pos. 2: Support roller without drive, front-facing sheets table for easier loading Pos. 3: Length measuring station with built-in fluorescence camera to detect error markings Pos. 4: Automatic, contactless width measurement Pos. 5: Optimizing cross-cut saw OptiCut 304 – right-hand version with integrated waste chute, incl. equipment package for large wood cross-sections Graphic-capable input terminal (16 x 40 characters, numeric keypad) with software package for optimization and system control Available for processing: - max. 16 product groups - max. 8 grades per product group - max. 200 fixed lengths per product group Pos. 6: Outfeed conveyor belt as sorting station with drive unit, length 7500 mm Pos. 7: 2 ejectors mounted on outfeed conveyor Location: Nattheim

Stanje: novo, Leto izdelave: 2022, Funkcionalnost: popolnoma funkcionalen, Neu Friulmac EQ 004 2.5 mit Zuführband und Aufgabetrichter Touchscreen-Bedienung und automatische Einstellung Arbeitslänge – min. 190 mm, max. 2500 mm Arbeitsbreite – min. 30 mm, max. 250 mm Arbeitshöhe/Dicke – min. 12 mm, max. 35 mm Bledpfovupm Djx Afnod Vorschubgeschwindigkeit – 6–25 m/min 2 x 2 Vorschubaggregat – 3 kW – 720 U/min Hauptprofilkopf – 4 kW – 7200 U/min Für weitere Informationen kann ich Ihnen die Originaldokumentation zusenden.

Leto izdelave: 2011, Stanje: skoraj kot novo (rabljeno), For sale is 1 roller conveyor, each including a geared motor: Technical Data: Bjdpfx Afsihpn Nonold Year of manufacture: 2011 Length: 12.75 m Width: 1.40 m Height: 1.00 m Load capacity: Up to 4 tons Geared motor per roller conveyor: SEW-EURODRIVE R87 DREE90L4 (further specifications see nameplate in the image) Three of the four roller tracks have a wooden sidewall along the entire length, and one roller track has a side wooden wall with a length of 5.20 m. Two of the four roller tracks are equipped with 3 lateral removal systems each. (see pictures)

Stanje: novo, mit Hobelwelle Typ: R-R-RP1300 Arbeitsbreite: 1300 mm Min. Werkstücklänge: 538 mm Arbeitshöhe: 3–110 mm Vorschubgeschwindigkeit: 6–30 m/min Gesamtanschlussleistung: 77,12 kW Motorleistung erste Einheit: 22 kW Motorleistung zweite Einheit: 30 kW Motorleistung dritte Einheit: 18,5 kW Schleifbandabmessungen: 1330x2200 mm Bsdpfsd H Sc Eex Afnold Arbeits-Luftdruck: 0,55 MPa Absaugleistung: 12.000 m³/h Transportmaße (LxBxH): 3090x2020x2260 mm Gewicht: 4.700 kg

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2005, Allgaier Screening Machine | Flat Screen Type ARSM 33-10 overhauled (workshop-refurbished) - Manufacturer: Allgaier - Type: ARSM 33-10 - Year of manufacture: 2005 - Condition: overhauled - Screening capacity: up to approx. 200 - 220 srm/h (with wood chips and sawdust) - Screening area: 10.0 m² x 2 = 20 m² per mesh size - Fractions: 3 - Screen decks: 4 units + 1 intermediate floor - Drive power: 7.5 kW - Dimensions (L x W x H): 7,000 x 3,540 x 2,700 mm - Machine weight: approx. 8,000 kg - Machine colour: RAL 6011 reseda green - Screen inserts selectable - Outlet layout according to customer requirements Screening machine overhauled. Pendulum roller bearings and suspension struts are new. Suitable, among others, for screening the following bulk materials: - Wood chips - Sawdust and wood shavings - Biomass - Wood pellets Bodpfxoq Iivae Afnjld - Charcoal - Waste wood - Bark Vibrating screen | Wood chip screen | Oscillating screen machine | Stationary screen | Flat screen | Plansifter | Oscillating screener | Roll sifter | Screening machine for wood chips

Leto izdelave: 2013, Stanje: zelo dobro (rabljeno), Gas burner Weishaupt WM-G10/3-A We have 8 units in stock. Capacity: 630 kW – 1200 kW 2x Year: 2007 WMG10/3-A 2x Year: 2010 WMG10/3-A 1x Year: 2011 WMG10/2-A 1x Year: 2011 WMG10/4-A 1x Year: 2009 WMG10/3-A 1x Year: 2013 WMG10/3-A We speak Russian! Inspection by prior telephone arrangement only! Preferred sale to dealers, commercial operators, or for export. All information provided without guarantee. Subject to errors and prior sale. The seller assumes no liability for typographical or data transmission errors. We are happy to purchase your used boiler or burner! Bjdpfx Aei Atp Sefnold Of course, we also handle all the necessary formalities. Loading possible.

Stanje: rabljeno, Leto izdelave: 2000, Število vreten: 5 kos Delovna širina: 230 mm Bledpewztw Sefx Afnjd Višina obdelave: 160 mm Pogonski motor podajalnika: 4 kW Podajalna hitrost: 5–24 m/min. Stružnica in profilirka Weinig Unimat 23E za štiristransko skobljanje in profiliranje lesa z mobilnim vretenom za samodejno nastavitev in utornim ležiščem (opcijsko brez utornega ležišča) za kratke in ukrivljene obdelovance ter z dolgim vijačnim vodilom. Opcijsko: Predelava na klasično gladko mizo, na zahtevo. Vreteno 1: Spodaj / 40 mm / 5,5 kW Vreteno 2: Desno / 40 mm / 7,5 kW Vreteno 3: Levo / 40 mm / Skupni motor z vretenom 2 Vreteno 4: Zgoraj / 40 mm / 7,5 kW Vreteno 5: Spodaj / 40 mm / 5,5 kW

Stanje: novo, €1,690 + 22% Italian VAT. A net invoice will be issued for customers with a valid VAT identification number. ----- The Brugger Power Split S14 is a powerful vertical log splitter offering an impressive splitting force of 14 tons. This robust machine is ideally suited for a wide range of applications and offers maximum flexibility in drive options – either via the 3.7 kW electric motor or PTO shaft. Key Features: - 14-ton splitting force - Combination drive: 3.7 kW electric motor & PTO drive - Weight: 250 kg - Split length up to 110 cm - Log lifter The delivery includes a log lifter which facilitates handling of heavy timber. Optionally, a hydraulic winch is available, providing added versatility and simplifying operation even further. With a maximum split length of 110 cm, the Brugger Power Split S14 offers the flexibility to process even larger logs with ease. A support table for shorter wood is also included. The Brugger Power Split S14 is the ideal choice for anyone seeking a reliable and high-performance wood splitting solution – whether for professional or private use. Prices + VAT: - Power Split S14 = €1,690 - Power Split S22 = €2,670 - Power Split S30 = €2,960 Accessories: - Support table for short logs = €125 - 4-way splitting wedge = €99 - Hydraulic winch = €595 Bsdpfxjxn Iq Rs Afnold ----- Contact us for your customised offer!

Stanje: dober (rabljeno), The debarker is perfectly suited for debarking both hardwood and softwood logs. The carriage is made of a heavy-duty steel frame. Equipped with 5 pairs of drive wheels. The milling arm is also built from a heavy-duty steel construction. Hydraulic milling head. 22 kW motor. Bodpfx Afstuyr Isnjld The log infeed conveyor shown in the photos is not included in the offer and is available for an additional charge of 25,000 PLN / 5,500 EUR.

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2008, Funkcionalnost: popolnoma funkcionalen, Kompletno obnovljena peletirka italijanskega proizvajalca ZEPI. Glavni motor ima moč 315 kW, kar omogoča proizvodnjo do 6 t/h lesnih peletov. Dobava vključuje tudi paletni mešalnik ZEPI ZC500 in dozirno enoto ZEPI ZFS250. Bsdpsvpvp Iefx Afnold