Vertikalni obdelovalni center

Matsuura MAM72-25V

Leto izdelave: 2011, Stanje: zelo dobro (rabljeno), 5-axis machining centre FANUC G-Tech 30i Bodogufmrepfx Afqsdk Travel distances: 550 x 410 x 450 mm B-axis table: +/- 110° A-axis table: 360° Spindle mount: BT40 Big Plus Spindle speeds: up to 15,000 rpm Tool changer: 40 positions Pallet stations: 2 x diameter 250 mm Internal spindle cooling 3D touch probe Tool measurement system 15x pallets Approx. 80x tool holders KNOLL / TURBO coolant system MARCELS MASCHINEN CH

Stanje: dober (rabljeno), Leto izdelave: 2010, obratovalne ure: 78.572 h, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 550 mm, pomik osi Y: 410 mm, pomik po osi Z: 450 mm, hitrost pomika os X: 500.000 m/min, hitrost podajanja osi Y: 50.000 m/min, hitrost podajanja os Z: 50.000 m/min, skupna masa: 12.000 kg, Special Equipment of the Machine 1 Extension of the tool magazine from the standard 30 tools to 210 tools, including preparation for 240 1 Pallet rotary storage for 10 pallets, including setup station, Number of pallets: 10, pallet size: D 130 mm, pallet interface: Capto C6 Max. workpiece size: D 250 x H 250 mm Max. workpiece weight: 40 kg Pallet clamping force: 22.5 kN 1 HSC main spindle 40 – 20,000 rpm with motor 7.5/11 kW, max. spindle torque: 70 Nm up to 1,500 rpm, including weekly timer for starting the warm-up cycle and automatic shutdown of the machine 1 spindle interface HSK 63A 1 direct axis measuring system (Heidenhain) on X, Y, and Z axes, pressurized with purge air 1 KNOLL coolant system, consisting of: - 1 scraper belt chip conveyor with lift pump and chip ejection to the operator side - 1 through-spindle coolant supply with coolant pump KTS25-50T, capacity 24 l/min at 70 bar, 5.5 kW - Coolant pressure adjustable in 3 stages - 1 external coolant supply with pump, capacity 100 l/min at 1.4 bar - 1 coolant shower with pump, capacity 100 l/min at 1.4 bar - 1 compact filter KF200, filtration capacity 200 l/min System dimensions (L x W x H): approx. 1.8 x 1.1 x 1.0 m Tank volume approx. 1,400 liters 1 coolant recirculating chiller VWK 90 – D emulsion Cooling capacity: 11.5 kW Ambient temperature up to 42°C Refrigerant: R407c 1 coolant spray gun inside the working area, incl. pump and electrical installation 2 spiral chip conveyors 1 TEBARON mechanical air filter TEB/BV2 for extracting emulsion/ oil mist and fumes, consisting of: - 3-stage pre-filter package - 1 HEPA filter tested according to DIN EN 603335-2-69 with BIA test certificate, separation efficiency > 99.995% for particles ≥ 0.3μ - Meets requirements for application categories K1/K2 (carcinogenic substances and pathogens) as well as dust class H. 1 single support with base plate for ISI air filter TEB/BV2 1 RENISHAW OMP 60 probe for automatic workpiece zero-point setting and measurement, can be loaded into the spindle via the tool changer: - Including EASY PROBE SOFTWARE - Pressure sensor for tool length measurement and tool breakage monitoring Special accessories for the control system 1 increase of workpiece coordinate systems from 6 to 54 1 coordinate system rotation G68/G69 1 beveling and rounding of corners 1 automatic zero point tracking 1 return-to-contour function 1 extension of macro variables from standard 100 – 149, 500 – 549 to 100 – 199, 500 – 999 1 IZ2/150NF HSC precision control for simultaneous 5-axis machining, consisting of: - Fast Data Server function - High-Speed Precision Contour Control - Nano Smoothing - Dynamic zero point tracking, up to 8 different zero points available for tracking (G54.2) Bdsdpoxwm Adofx Afqsk - TCPC tool center point control for 5-axis simultaneous milling (G43.4/G49) - Swivel cycle allows machining on an inclined working plane (G68.2/G53.1/G69)

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2006, obratovalne ure: 19.911 h, Splošni podatki Mere širina 1500 mm Mere globina 2200 mm Mere višina 2250 mm Krmilna enota Blagovna znamka FANUC Model 30 iM Glavni pogon Območje vrtljajev vretena 50–15000 min⁻¹ Vreteno – tip konusa orodja BT40 Mediji Transporter odrezkov Da Dodatna oprema Menjalec orodij s 40 mesti (verižni) Bdodpexgkddefx Afqsk Menjalec palet za 2 paleti, premer 130 mm Nadomestne palete Capto C6 Hladilni sistem KNOLL z dovodom hladilne tekočine skozi vreteno in črpalko KTS25-50T / tuš za hlajenje s kapaciteto 100 l/min pri 1,4 bara 2 spiralna transporterja odrezkov Merilna tipala Renishaw OMP60 / laserski sistem Renishaw TRS-1 Električno vrtljivo opazovalno okno / Za krmiljenje: programirljivo ogledalo, rotacija koordinatnega sistema, IZ2/150NF HSC precizni nadzor za simultano 5-osno obdelavo CE oznaka Ta 5-osni Matsuura MAM72-25V je bil izdelan leta 2006. Idealen za kompleksna in natančna obdelovalna opravila, ta vertikalni obdelovalni center nudi večjo prilagodljivost in produktivnost za vaše proizvodne zahteve. Izkoristite priložnost za nakup tega vertikalnega obdelovalnega centra Matsuura MAM72-25V. Za več informacij nas kontaktirajte. Vrste uporabe Rezkanje

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2007, obratovalne ure: 66.963 h, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 550 mm, pomik osi Y: 410 mm, pomik po osi Z: 450 mm, obremenitev mize: 40 kg, največja hitrost vrtenja: 15.000 obr/min, TECHNICAL DETAILS B axis: +110° to -110° C axis: 360° Table indexing B and C axes: 0.001° Workpiece Max. workpiece size: Ø 250 × height 250 mm Max. table load: 40 kg Pallet system Pallet size: Ø 130 mm Max. workpiece size on pallet: Ø 250 × height 250 mm Max. pallet load: 40 kg Pallet interface: Capto C6 Spindle Standard speed range: 50 - 15,000 rpm Spindle taper: BT 40 JIS B 6339 Big+ Bedpfx Aewx Iugsfqedk Spindle motor power with FANUC drive: 7.5 / 5.5 kW Max. torque: 65.1 Nm at 1,100 rpm Rapid traverse and feed rates Rapid traverse X, Y, Z axes: 50,000 mm/min Rapid traverse B axis: 30 rpm Rapid traverse C axis: 50 rpm Feed rate X, Y, Z axes: 1…50,000 mm/min Feed rate B axis: 30 rpm Feed rate C axis: 50 rpm Tool changer Max. tool weight: 10 kg Max. tool diameter with all pockets filled: Ø 96 mm Max. tool diameter with adjacent pockets empty: Ø 150 mm Max. tool length: 300 mm Guides Axis guides: Linear roller guides Lubrication: Permanent grease lubrication Ball screw diameter X, Y, Z axes: Ø 36 mm Lead: 16 mm Axis drives Power X, Y, Z axes: 4.5 / 4.5 / 5.5 kW Power B, C axes: 4.5 / 2.5 kW Axial force X, Y, Z axes: kN MACHINE DETAILS Control: MATSUURA G-Tech 30i (FANUC 30i MA) Serial number: SN17224 Weight & Dimensions Machine weight standard: 7,800 kg Machine with PC-2: 8,600 kg Machine height above floor: 2,705 mm Width: 2,281 mm Depth: 3,665 mm Connections Total connected load standard machine: 32 kVA Supply voltage: 3 x 400 V, 50 Hz Compressed air connection: 5.5-9.5 bar EQUIPMENT 5-axis simultaneous control Tool magazine capacity extension to 40 tool positions Pallet changer with 2 pallets, 130 mm diameter Direct path measuring system (Heidenhain) in X, Y and Z axes, with air purge KNOLL coolant system: 1 scraper or hinged belt chip conveyor with lift pump and chip discharge to operator side (type: 500 K-1/10, year: 2010) 1 internal coolant supply through spindle with coolant pump KTS25-50T, capacity 31 l/min at 70 bar, 5.5 kW, pressure switchable in 3 steps 1 external cooling unit with coolant pump, capacity 100 l/min at 1.4 bar 1 coolant flushing unit with coolant pump, capacity 100 l/min at 1.4 bar 1 compact filter KF200, filtration capacity 200 l/min 2 spiral auger conveyors in the machine RENISHAW OMP 60 measuring system for automatic zero-point setting and workpiece measurement, can be changed via tool changer OMRON pressure transducer for tool length measurement and tool breakage monitoring

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2006, A CNC 5-axis vertical machining center from Matsuura is available. Travel axes X/Y/Z: 550mm/440mm/580mm, spindle taper: BT40, spindle speed: 15,000 rpm, tool magazine capacity: 40 stations, pallet changer: double (2-pallet system), pallet diameter: 130mm. Machine dimensions (X/Y/Z): approx. 2900mm/2550mm/3000mm, weight: approx. 6000kg, control unit: Matsuura G-Tech 30i, machine run time: approx. 19,911 hours. Includes 2 additional pallets and Knoll coolant system. Documentation is available. On-site inspection is possible. Bdsdpfx Afewyxavjqsk

Stanje: zelo dobro (rabljeno), Leto izdelave: 2007, Funkcionalnost: popolnoma funkcionalen, 5-axis vertical machining center, used, year of manufacture 2007 / SN17224 / Control ON time: 66,963 hours Control MATSUURA G-Tech 30i (FANUC 30i MA) for 5-axis simultaneous machining Travel X-axis travel: 550 mm Y-axis travel: 410 mm Z-axis travel: 450 mm B-axis: +110° to -110° C-axis: 360° Max. workpiece size: Ø250 x height 250 mm Max. table load: 40 kg Table indexing B- and C-axes: 0.001° Pallet size: Ø130 mm Max. workpiece size: Ø250 x height 250 mm Max. pallet load: 40 kg Pallet interface: Capto C6 Spindle Speed range (standard): 50 – 15,000 rpm Bodpfxswwk Dzj Afqodk Spindle interface with face contact: BT 40 JIS B 6339 Big+ Spindle motor output with FANUC drive: 7.5/5.5 kW Max. torque: 65.1 Nm up to 1,100 rpm Rapid traverse and positioning speeds Rapids: Rapid traverse X, Y, and Z axes: 50,000 mm/min B-axis: 30 rpm C-axis: 50 rpm Feed rates: X, Y, and Z axes: 1 – 50,000 mm/min B-axis: 30 rpm C-axis: 50 rpm Tool changer Max. tool weight: 10 kg Max. tool diameter with all positions filled: Ø96 mm Max. tool diameter with adjacent stations free: Ø150 mm Max. tool length: 300 mm Guides Axis guides: Linear roller guides Lubrication: Lifetime grease lubrication Ball screws Ball screw diameter X, Y, and Z axes: Ø36 mm Lead: 16 mm Axis drives Power X, Y, and Z axes: 4.5/4.5/5.5 kW Power B- and C-axes: 4.5/2.5 kW Axial force X, Y, and Z axes: KN Space requirements* (standard machine) Machine height above floor: 2,705 mm Width: 2,281 mm Depth: 3,665 mm *Dimensions may vary for this particular machine! Machine weight Standard machine: 7,800 kg Machine with PC-2: 8,600 kg Connection data Total connected load: Standard machine: 32 kVA Machine with PC-2: kVA Connection voltage: 3 x 400V, 50 Hz Compressed air connection: 5.5 – 9.5 bar 5-axis simultaneous control Upgrades Tool magazine capacity extended from the standard 30 to 40 tool stations Pallet changer with 2 pallets, 130 mm diameter Direct measuring system (Heidenhain) on X, Y, and Z axes, air purge Coolant systems KNOLL coolant system comprising*: - 1 scraper conveyor or hinged belt chip conveyor with lift pump and chip discharge to operator side (Type: 500 K-1/10, year 2010) - 1 through-spindle coolant supply with coolant pump KTS25-50T, output 31 l/min at 70 bar, 5.5 kW coolant pressure, 3-stage switchable - 1 external cooling with coolant pump, output 100 l/min at 1.4 bar - 1 coolant shower with coolant pump, output 100 l/min at 1.4 bar - 1 compact filter KF200, filtration capacity 200 l/min - 2 spiral chip conveyors in the machine, standard option Measuring in the machine - RENISHAW OMP 60 probe for automatic zero point setting and workpiece measurement, can be loaded into the spindle by the tool changer - OMRON pressure sensor for tool length measurement and tool breakage monitoring Subject to technical modifications and errors. Prior sale reserved!