Obdelovalni center s potujočim stebrom

Matec HV 2000

Stanje: zelo dobro (rabljeno), Leto izdelave: 2016, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 4.000 mm, pomik osi Y: 2.200 mm, pomik po osi Z: 1.100 mm, dolžina mize: 4.500 mm, širina mize: 2.500 mm, največja hitrost vretena: 22.000 obr/min, CNC Heidenhain iTNC 640 WORKING AREA X-axis longitudinal travel: 4,000 mm Y-axis transverse travel: 2,200 mm Z-axis vertical travel: 1,100 mm Maximum interpolated feed rate: 50 m/min WORKTABLE Dimensions: 4,500 x 2,500 mm Height: 300 mm Load capacity: 15 T/m² T-slots for workpiece clamping: 28 mm DIN 650 (H12), complete with leveling pads. T-slot direction aligned parallel to the Y-axis movement. UNIVERSAL CONTINUOUS POSITIONING HEAD FOR ELECTROSPINDLE Automatic universal head indexed at 360,000 positions (every 0.001°). Rotational movement is driven by direct drive motors and controlled by the CNC as a positioning axis. Automatic tool clamping. Allows for 10° undercuts. Internal cooling system for bearings and axis motors. Rotation range C-axis: +/- 270° Rotation range A-axis: +/- 185° Maximum rotation speed of axes: 30 rpm Maximum working torque on A/C axes: 450 Nm Clamping torque on axes: 1,400 Nm Spindle output power (S1/S6): 22/33 kW Spindle output torque (S1/S6): 84/128 Nm Maximum spindle speed: 22,000 rpm Constant power speed range: 3,000 to 18,000 rpm Constant torque speed range: 10 to 3,000 rpm Tool holder: HSK – A63 DIN 69893 ELECTROSPINDLE HSK – A100 WITH SEMI-AUTOMATIC CHANGE SYSTEM: Spindle output power (S1/S6): 37/43 kW Spindle output torque (S1/S6): 140/165 Nm Maximum spindle speed: 15,000 rpm Constant power speed range: 2,500 to 12,000 rpm Constant torque speed range: 10 to 2,500 rpm Tool holder: HSK – A100 DIN 69893 55-POSITION CHAIN TOOL MAGAZINE, HSK - A100 / HSK – A63: Floor-mounted fixed chain magazine located at the rear of the machine, enclosed for operator safety, with a vertical tool change arm and automatic tool preparation. "Fixed position" management. Hydraulic axis locking Total tools: 55 Tool type: HSK-A63 DIN 69893 Tools: 30 Maximum tool diameter: 90 mm Maximum tool diameter with adjacent slots free: 160 mm Maximum tool length: 300 mm Maximum tool weight: 10 kg Tool type: HSK-A100 DIN 69893 Tools: 25 Maximum tool diameter: 100 mm Maximum tool diameter with adjacent slots free: 160 mm Maximum tool length: 450 mm Maximum tool weight: 20 kg REQUIRED CONNECTIONS: Dcjdpfx Asyv In Ijmiei Maximum installed power: 177 kVA Maximum required current: 235 A Machine equipped with: • Remote electronic handwheel Heidenhain HR550 • High-pressure water and air through spindle • Semi-automatic electrospindle change, with HSK – A63 and HSK – A100 interfaces • Assorted tooling included • Renishaw probe • BLUM laser presetter • AUTOCAL automatic head calibration system • Visormax remote monitoring subscription • Electrical cabinet air conditioner • Cooling system for all axes and the electrospindle • User and maintenance manual and CE declaration of conformity

Stanje: dober (rabljeno), Leto izdelave: 1998, Max. pitch circle diameter external gearing: 300 mm Max. pitch circle diameter internal gearing: 300 mm Max. outside diameter of workpiece (fixture): 450 mm Module - max.: 6 Max. gear width: 100 mm Max. helix angle (with tool Ø 125 mm): +/- 45° Stroke rate - infinitely variable: 130 - 1300 strokes/min Workpiece weight: 1000 kg Minimum distance table surface - tool spindle: -55 / +300 mm Maximum distance table surface - tool spindle: 200 mm Maximal distance table surface - tool spindle: 350 mm Manual column lateral displacement: +/- 25 mm Manual swivel angle of the tool spindle: +/- 0.5° Max. tool speed: 15 rpm Max. workpiece speed: 27 rpm Max. tool diameter: 7 in Voltage: 400 V Frequency: 50 Hz Max. mains current: 70 A Total power requirement: 48 kW Machine weight approx.: 11 t Space requirements approx.: 4.27 x 3.11 x 2.87 m Main spindle taper: SK 45 Table bore: 40 mm Control: Siemens Sinumerik 840 C Dodpfx Amevu E Nusioci Gear shaping machine: Gleason PFAUTER Mod. PSA 300 CNC modular gear cutting machine with shaping cutter for the machining of external and internal cylindrical gears, with straight or helical involute gearing as well as any other profile achievable via generating or form shaping processes. The machining cycle is controlled by a CNC unit, equipped with dedicated gear cutting software. Application scope --> The PSA 300 is designed for manufacturing: - Gears with straight external toothing - Gears with straight internal toothing - Gears with external helical gearing - Gears with internal helical gearing

Stanje: dober (rabljeno), Leto izdelave: 2014, Funkcionalnost: popolnoma funkcionalen, stružna dolžina: 760 mm, premer struženja: 376 mm, največja hitrost vretena: 3.500 obr/min, premer tulec: 78 mm, skupna masa: 6.000 kg, Oprema: dokumentacija / priročnik, vrtilna hitrost brezstopenjsko nastavljiva, Glavni parametri: Krmilnik: FANUC 0iD/31iA Vpenjalna glava: SAMCHULLY 10" Vretenska odprtina: 86 mm S cevjo za zaščito: 78 mm Revolverska glava: 12 glavnih in 12 sekundarnih pozicij, priklop BMT65 Programabilna hidravlična konica: MT5 Moč glavnega vretena: 22 kW S1max=3500 1/min Moč pogonjenih orodij: 5,5 kW S2max=5000 1/min X-os gib: 260 mm Z-os gib: 830 mm Y-os gib: ±52 mm (104 mm) C-os Maksimalna dolžina struženja: L=760 mm Dedpoykikxefx Amieci Največji premer struženja: D=376 mm Hitri pomik: 30 m/min Avtomatsko merjenje orodja s sondo Teža: 6000 kg

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2008, največja hitrost vretena: 3.500 obr/min, potovalna razdalja osi X: 245 mm, pomik osi Y: 102 mm, pomik po osi Z: 1.270 mm, skupna masa: 6.300 kg, proizvajalec krmilnikov: FANUC, model krmilnika: 18i-TB, Ta 3-osni horizontalni stružni stroj DOOSAN Puma 2500XLY je bil izdelan leta 2008. Nudi robustno zmogljivost za precizno struženje. Če iščete visokokakovostne možnosti za struženje, priporočamo, da razmislite o stroju DOOSAN Puma 2500XLY, ki ga ponujamo v prodajo. Za več informacij nas kontaktirajte. Dodatna oprema • Dokumentacija/priročnik Prednosti stroja Tehnične prednosti stroja • Dolžina struženja: 1270 mm • Premer struženja nad prečnim sani: 334 mm • Premer struženja: 334 mm • Premer vretena: 86 mm • Nosilec orodja: 55 mm • Brezstopenjska nastavitev hitrosti Dodatne informacije Stroj je še vedno priključen na elektriko Dcsdpfx Ajx D H Aqsmiei Obseg vpenjanja 30-150 mm Maksimalna odprtina 170 mm

Stanje: dober (rabljeno), 1 rabljeni ravnalni brusilni stroj Proizvajalec: Jung Tip: HF 50 Tehnični podatki: - Pomik Z: 400 mm - Pomik X: 500 mm - Pomik Y: 200 mm - Dolžina mize: 720 mm - Največje število vrtljajev vretena: 4000 obr/min - Širina mize: 200 mm - Najmanjše število vrtljajev vretena: 1000 obr/min - Transportne mere: 2300 mm x 1500 mm x 1700 mm (d x š x v) - Transportna teža: 2000 kg Z: Digitalni prikazovalnik Dcjdpfxexgbb Ts Amioi Diaform naprava

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2022, obratovalne ure: 12.719 h, potovalna razdalja osi X: 2.000 mm, pomik osi Y: 800 mm, pomik po osi Z: 850 mm, dolžina podajanja os X: 2.000 mm, dolžina pomika po osi Y: 800 mm, dolžina podajanja os Z: 850 mm, nazivna (navidezna) moč: 21 kVA, proizvajalec krmilnikov: Heidenhain TNC 640 mit CELOS, teža obdelovanca (maks.): 2.000 kg, skupna višina: 3.200 mm, skupna dolžina: 4.500 mm, skupna širina: 7.100 mm, širina mize: 850 mm, dolžina mize: 2.350 mm, vrtljajska hitrost (min.): 15.000 obr/min, hitrost vretena (min.): 15.000 obr/min, Year of manufacture: 2022 CNC control: Heidenhain TNC 640 with CELOS Axes Travel X-axis mm: 2000 Travel Y-axis mm: 800 Travel Z-axis mm: 850 C-axis indexing degrees: 360º (0.001) B-axis indexing degrees: ±120 Rapid traverse m/min: 50 Axis acceleration m/s²: 5 Work table Pallet dimensions mm: 2350 x 850 Max. workpiece weight kg: 2000 NC milling/turning table: Pallet dimensions mm: Ø800 Max. workpiece weight kg: 800 Table rotation speed rpm: 50 Spindle Max. spindle speed rpm: 15000 Spindle drive power kW: 21/16 (40%ED/cont) Spindle torque Nm: 111/85 (40%ED/cont) Cooling Coolant supply through spindle bar: 40 Tank capacity liters: 600 Tool system Tool holder: SK 40 Number of tools in magazine: 40 Tool changer type: Double gripper With free adjacent places mm: 130 With occupied adjacent places mm: 80 Max. tool length mm: 400 Max. tool weight kg: 8 Chip-to-chip time sec.: from 7.5 Equipment Chip conveyor Fixed table with integrated rotary table Infrared measuring probe Internal coolant supply Rinse gun Blow air through spindle center selectable via M function Signal lamp Mist separator NC rotary tilting table Dcodpfxoy Shgvs Amioi Prepared for use with 3D quickSET MPC – Machine Protection Control Automatic work area door Automation interface Machine operating hours: Power-on hours: 18,669 Spindle operating hours: 12,719 Base machine: Dimensions/Weight Length mm: 4500 Width mm: 7100 Height mm: 3200

Stanje: rabljeno, TECHNICAL DATA - Number of axes: 7 - Number of spindles: 2 MAIN SPINDLE - Max. bar diameter: 20 mm - Max. machinable length: 205 mm - Spindle speed: 10,000 rpm - Spindle drive power: 3.7 kW - Minimum C-axis resolution: 0.001° SUB SPINDLE - Max. bar diameter: 20 mm - Spindle speed: 8,000 rpm - Spindle drive power: 2.2 kW - Minimum C-axis resolution: 1° - Number of tool holders: 1 TOOL HOLDER 1 - Number of positions: 10 - Number of driven positions: 4 FRONT TOOL POST - Number of positions: 7 SUB OPERATION - Number of positions: 4 - Number of driven positions: 4 - Driven tool speed: 8,000 rpm ELECTRICAL SUPPLY - Supply voltage: 400 V - Total power: 7 kW WEIGHT AND DIMENSIONS - Footprint: 2200 x 1200 mm - Machine height: 1700 mm - Machine weight: 2200 kg MACHINE HOURS - Power-on hours: 27,854 h - Operating hours: 20,213 h - Spindle hours: 13,158 h EQUIPMENT - Control: Fanuc 30i-model A Dsdjxlum Hepfx Amijci - HFT (High Frequency Turning) - Driven guide bushing - Parts catcher - Parts conveyor - Parts ejector - Coolant tank - Bar feeder: FMB turbo 3-26 / 3200 A

Stanje: rabljeno, Leto izdelave: 2018, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 1.520 mm, pomik osi Y: 520 mm, pomik po osi Z: 460 mm, hitro pomikanje X-os: 32 m/min, hitri pomik os Y: 32 m/min, hitri pomik na osi Z: 32 m/min, proizvajalec krmilnikov: SIEMENS, model krmilnika: 840D, največja hitrost vrtenja: 12.000 obr/min, skupna masa: 10.000 kg, največja hitrost vretena: 12.000 obr/min, nos vretena: ISO 40, število mest v zalogovniku orodij: 32, Oprema: dokumentacija / priročnik, transportni trak za ostružke, vrtilna hitrost brezstopenjsko nastavljiva, Leto izdelave: 2018, v skladu s CE standardi CNC: SIEMENS 840D s SHOP MILL 4 osi + 1 LE 18.300 ur vklopa Dcjdpfx Aoy Azcljmiei Dimenzije delovne mize: miza 2 kosa - fiksna 920x540 mm / rotacijsko-nagibna 650x500 mm (z razširitvenim obročem) Premik v vzdolžni osi X: 1520 mm Premik v prečni osi Y: 520 mm Premik v vertikalni osi Z: 420 mm Vpenjalni stožec vretena: ISO 40 Št. vrtljajev vretena: 12.000 min⁻¹ Samodejni menjalnik orodij: 32 mest Moč glavnega motorja: 15 kW Približna neto teža: 10.000 kg Pribor: Notranje hlajenje Odvajač ostružkov Popolno zgornje ohišje Pnevmatsko odpiranje vrat Možnost prednastavitve in tipala BLUM.

Stanje: dober (rabljeno), Leto izdelave: 2006, potovalna razdalja osi X: 2.500 mm, pomik osi Y: 1.250 mm, pomik po osi Z: 1.000 mm, Travels Longitudinal (X): 2500 mm Vertical (Y): 1250 mm Transversal (Z): 1000 mm Table size (rotary): Length: 1000 mm Width: 1000 mm Max. table load: 5000 kg T-slots: 6 x 22 mm H10 Drive power: 100% duty cycle, 24 kW Tool holder: ISO 50, DIN 69871 - AD Spindle speeds: 20 – 4000 rpm Torque: 479 Nm Feed range X, Y, Z axes: 10 – 10000 mm/min Rapid traverse X, Y, Z: 25000 mm/min Machine weight: approx. 15000 kg Equipment: - Internal coolant supply according to DIN 69871 Form AD including minimum quantity oil lubrication with 15 different dosing levels activated by M functions (programmable): 20 bar - NC rotary table, size 1000 x 1000 mm as 4th axis integrated into machine control. Max. workpiece load 5000 kg, positioning accuracy ± 5", table surface with 22 T-slots - Chip conveyor for TA-D 25 - Tool changer Dedsykbxzepfx Amisci Accessories - Front-positioned, movable operator panel with Heidenhain iTNC 530 control (single processor) - Portable electronic handwheel HR 420 with 3 m spiral cable (option) - 3D thermal expansion compensation - Automatically indexing milling head / 2 planes, 2.5° increments (H200) (option) - Distance from spindle nose to table edge: 250 mm - NC rotary table, size 1000 x 1000 mm, as 4th axis integrated into machine control. Max. workpiece load 5000 kg, positioning accuracy ± 5", table surface with 22 T-slots. - Coolant system with 150 l tank capacity, pump pressure 5 bar, delivery rate 50 l/min, outlet via ring nozzle around machine spindle - Fully enclosed splash guard cabin with sliding doors at the front, additional sliding door on the left column side, and viewing windows on all 4 sides - Heidenhain drive motors on all axes with digital drive technology - INA linear roller guide system on all axes - Direct linear measuring system by Heidenhain on all axes - Telescopic covers on X-axis guides - Precision ball screws on X, Y and Z axes - Automatic cycle lubrication for all axes and moving components - Electrical equipment by Siemens - Hydraulic unit by Vickers

Stanje: dober (rabljeno), Leto izdelave: 2006, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 2.500 mm, pomik osi Y: 920 mm, pomik po osi Z: 820 mm, proizvajalec krmilnikov: Heidenhain, model krmilnika: iTNC530, skupna višina: 2.950 mm, skupna dolžina: 6.000 mm, skupna širina: 3.800 mm, širina mize: 900 mm, dolžina mize: 3.100 mm, vrtljajska hitrost (min.): 20 obr/min, največja hitrost vrtenja: 18.000 obr/min, skupna masa: 25.000 kg, hitrost vretena (min.): 20 obr/min, največja hitrost vretena: 18.000 obr/min, dovod hladilne tekočine: 40 letvica, Oprema: dokumentacija / priročnik, transportni trak za ostružke, vrtilna hitrost brezstopenjsko nastavljiva, X-os: 2500 mm Dsdpoyac Tlefx Amisci Y-os: 920 mm Z-os: 820 mm Delovna miza: 3100 x 900 mm Vpenjalo vretena: SK/ISO40 Vrtljaji vretena: 20 - 18.000 1/min Menjalnik orodij: 30 kosov Krmilnik: Heidenhain iTNC 530 Opremljen z: - Transporter za ostružke - Hlajenje skozi vreteno 40 bar - Orodja ISO40 - Navodila za uporabo Država izvora: Nemčija Moč motorja: 35 kW Dimenzije stroja D x Š x V: 6000 x 3800 x 2950 mm Teža stroja: 25.000 kg