Linija za proizvodnjo parketa

Marinus not Weinig V&G 400

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, double tenoning and double drilling machine, step-by-step Equipped with: 1+1 saw units 1+1 milling units 1+1 drilling units Maximum length: 2500 mm Ksdpfx Agjw A A E Ij Usna

Stanje: zelo dobro (rabljeno), Leto izdelave: 2008, Working width: 1,100 mm Workpiece thickness: 3 – 160 mm Abrasive belt dimensions: 1,120 x 1,900 mm Variable feed speed: 2.6 – 13 m/min Feed motor power: 1.10 kW, 400 V, 50 Hz Extraction port diameter: 2 x 160 mm Compressed air supply: 6 bar Dimensions (L x W x H): 1,705 x 1,545 x 1,905 mm 1st Unit: Steel contact roller, Ø 160 mm Motor power: 15 kW, 400 V, 50 Hz 2nd Unit: Combination unit, rubber-coated contact roller (Sh 65), fixed sanding pad Motor power: 11 kW, 400 V, 50 Hz Ksdpoychqzefx Ag Ujna Abrasive belt cleaning by compressed air 3rd Unit: Cleaning brush Multifunction display Multifunction lever (conveyor belt, workpiece thickness adjustment) Electronic abrasive belt oscillation Pneumatic oscillation of conveyor belt Motorised workpiece thickness adjustment with LED display in 0.1 mm steps Units with emergency brake device Emergency stop button at infeed & outfeed Motor protection switch Roller table extension at infeed with 2 idler rollers Automatic star-delta starting Complete documentation Note for used machines: • Technical data subject to change and prior sale. • Prices quoted are ex-works and refer to collection only – loaded free of charge! • The machines have been cleaned and function tested. • All machines are sold as seen, without any warranty whatsoever. The buyer is welcome to inspect the machines at the location. • Special agreements are only valid in written form. (Enquiries will only be answered if you provide your address and telephone number!)

Stanje: rabljeno, številka stroja/vozila: 007984, Maks. obdelovalna širina: 1300 mm Min. obdelovalna debelina: 4 mm Knsdpfxewqdbmo Ag Uja Delovna miza: fiksna višina Podtlak preproga: da Število delovnih agregatov: 4 kos

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2019, obratovalne ure: 180 h, Funkcionalnost: popolnoma funkcionalen, skupna dolžina: 8.000 mm, skupna širina: 1.200 mm, skupna višina: 1.300 mm, vrsta vhodnega toka: Klimatska naprava, vhodna napetost: 400 V, moč: 10 kW (13,60 KM), SOEST Universal Surface Line for oiling, staining, lye treatment, patinating, etc. Primarily for parquet surfaces up to 40 cm workpiece width. 1) Roller Machine RCR-400-L Reverse, for applying and removing surface products such as oils, stains, lacquers, etc. Knodpjyaiafofx Ag Uoa 2) Distributor Machine VP-400-1B-2P-2B with one brush, two disc pads, and two additional brushes. Suitable for distributing, working in, or patinating surface media into pores and/or for removing, spreading, and distributing materials to achieve desired surface effects. 3) Accessories: two replacement application rollers, brand new material pump (never used), four spare brushes, various distributor pads, and a pneumatic brush cleaning machine. This complete surface line is constructed for professional industrial use and is configured with full equipment options. A lot of additional accessories are included, such as extra rollers and cleaning machines. (See pictures!) Very robust construction, all motors with frequency control (Siemens). Speeds are steplessly adjustable in both forward and reverse operation. Maximum workpiece width approx. 410 mm. The line is in excellent condition with only about 180 operating hours and is therefore described as like new. This surface machine was only used as an auxiliary line in a parquet manufacturing facility and was only operated for certain surface techniques, which explains the low operating hours. It was only sporadically in use from 2019–2022. In 2023, our company downsized, and the machine has been stored ever since. It is therefore immediately available and is in almost pristine condition! We no longer require this line; therefore, it is for sale. The original price for this line in 2019 was approx. €87,000. The current selling price is negotiable. The surface line can be inspected by appointment. If required, we can also sell 10 drying trolley racks with this line. (YouTube video is only a sample video of a similar line configuration!)

Stanje: novo, Leto izdelave: 2024, Delovna širina: 600 mm Delovna višina: 5 mm do 300 mm Minimalna dolžina obdelovanca: 250 mm Agregati: 2 1. Žagalni agregat Random System: izgled žagalnega reza Knodpsupy Spefx Ag Uea 2. Krtača: Tynex, premer 210 mm Nastavitev višine: električna Prikaz višine: digitalni Podajalna hitrost: 4 - 14 m/min Moč motorja žagalnega agregata: 1,1 kW Moč motorja krtače: 4 kW Moč motorja podajanja: 0,37 kW Dolžina stroja: 1400 mm Širina stroja: 1500 mm Višina stroja: 1600 mm Teža: 700 kg

Stanje: zelo dobro (rabljeno), Leto izdelave: 2009, Funkcionalnost: popolnoma funkcionalen, Stroj za utore za parket Costa Righi mod. Zefiro 2200 Največja razdalja med zunanjimi rezili: 2200 mm Knsdpfx Asx Rrqvjg Uoa Uporabna prehodna širina kosa: 2400 mm Vključujoč vhodni trak in vhodne verige Vključena rezila

Stanje: novo, Leto izdelave: 2026, Motor Električni, 30 kW Električni, 37 kW Električni, 45 kW Dimenzije rezanja Maks. premer debla 105 cm Maks. dolžina debla 4,5 m (ležišče S) 8,4 m (ležišče L) Do 12 m (po naročilu) Razdalja med valji 90 cm Maks. širina rezanja (deska) 85 cm Oprema rezalne glave Naprava za samodejno nastavitev debeline rezanja (Setworks) Industrijski krmilnik PLC z avtomatskim načinom Pogon rezalne glave navzgor/navzdol Električni (servo) Pogon rezalne glave naprej/nazaj Električni Roka za vodenje žage Električna (upravljanje z joystickom) Sistem za čiščenje žage Samodejno mazanje z oljnim meglicami s pnevmatsko podporo Sistem za napenjanje žage Električno-hidravlični z akumulatorjem tlaka Korovnik Neobvezno Premer odvodnega odprtine za žagovino 150 mm (6") Lastnosti rezalne glave Štirje kameri Sistem za odlaganje desk Dodatne možnosti Laser Žaga Dolžina 6270 mm Širina 50 mm 75 mm (standardno) 100 mm 120 mm Vodila za žago Premer 800 mm Tip Brez pasov Material Konveksno litino Oprema ležišča Konstrukcija ležišča Dvostranski sistem za vodenje rezalne glave Ksdpfxozqz T Re Ag Usna Lastnosti ležišča Transportni trak za deske Blažilni valj Dodatne možnosti Transportni trak, ki sledi žagi Komplet za manevriranje debla Industrijska hidravlika 1 ali več pritiskov za določanje debla na dveh gredah 1 ali več dvosmernih verižnih pogonov za obračanje 2 ali več pogonjenih nivelirnih valjev 2 ali več opor Hidravlična enota z močjo 7,5 kW ali 11 kW

Stanje: dober (rabljeno), Leto izdelave: 2000, Schroeder Mosaic Press 160 mm. Ksdpfx Agsr Iyvbj Ujna Bonding patterns – brick/bond (English pattern) panel 640x274 mm and halves 640x137 mm, bonded in 6 variants: - single brick, offset 50% - double brick, offset 50% - triple brick, offset 50% - single brick, offset 25% - double brick, offset 25% - triple brick, offset 25%

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2022, as new (only approx. 5,000 m² of parquet processed so far), compact oil application line consisting of: Roller Application Group: For the application of oils, etc. Touch screen control Manual height adjustment Max. working width: 300 mm Max. workpiece height: 50 mm Membrane pump with max. capacity 18 l/min Frequency inverter for variable speed of the application roller Frequency inverter for variable speed of the counter-roller Transport belt speed adjustable from 3 to 14 m/min Stainless steel recovery trays Pad Group + Brush Group: For spreading and removing excess oils Kodpfxsx Ah A As Ag Uona Touch screen control Manual height adjustment Transport belt speed adjustable from 3 to 14 m/min Max. working width: 300 mm Max. workpiece height: 50 mm Pad diameter: 300 mm Quick-change system for pads Brush dimensions L x D = 300 x 160 mm Quick-change system for brushes UV / LED Group Touch screen control Manual height adjustment Max. working width: 300 mm Max. workpiece height: 50 mm UV-LED power = 12 Watt/cm² Incl. extraction fan Transport belt made of Kevlar fabric Transport belt speed adjustable from 3 to 14 m/min Outfeed Transport Belt Length approx. 2,500 mm Max. working width: 300 mm Transport belt speed adjustable from 3 to 14 m/min Notice for used machines: • Subject to errors in technical data and prior sale. • Prices quoted are ex-location, loaded onto truck. • The machine has been cleaned and tested for functionality. • All machines are purchased as inspected, without any warranty or guarantee. Buyers are welcome to inspect the machines at our location. • Special agreements are only possible in written form. (We only respond to inquiries that include your address and telephone number!)

Stanje: rabljeno, Leto izdelave: 2013, Drying chamber with intermediate ceiling ventilation and front-end wagon loading for the production and conditioning of 3 mm oak lamellae, with initial moisture content of 12 to max. 15% / final moisture content 7% Used, in good condition Manufacturer: Mühlböck Model: ZSWM2110-1180C – 1.0 l/h at 40° C above 30% RH Year of manufacture: 2013 Rated power: 7 kW / 15A Frequency: 50 Hz Control voltage: 24VDC/230VAC Protection class: IP54 Capacity: The chamber holds: - 2 packs in width, each 1.10 m, with 0.20 m spacing - 1 pack in height, 1.80 m, with 0.10 m thick supporting timbers plus a 0.10 m free space - 2 packs in length, each 2.20 m, plus 0.60 m free space The chamber contains 4 stacked packages and has a gross total volume of 17.4 m³. The net capacity is 4 m³ of wood – with a wood thickness of 3 mm and stack batten thickness of 10 mm, utilizing 90% of the width for edged timber. Usable internal dimensions per chamber: Width 2.40 m x Height 2.30 m x Length 5.00 m - Aluminum cassette construction - Aluminum frame - Dimensionally stable rock wool insulation - Aluminum trapezoidal sheeting - Snow load 100 kg/m² - Double-wing swing door - Front-end loading - 2 fans, each 3 kW (D=800 mm) - Stainless steel/aluminum finned tube heat exchanger, 50 kW, flow temperature of 80°C, return temperature 73°C - Servo-controlled supply and exhaust air flaps - Cold water spray system Kodovwfhiepfx Ag Usna - Chambers operate fully automatically - K5 computer control system Dismantling: Customer location Delivery as inspected, in current condition No warranty or guarantee