Dvigalo

Manitou TJ280

Stanje: rabljeno, Leto izdelave: 2025, skupna dolžina: 11.350 mm, - Working height: 27.73 m - Platform height: 25.73 m - Max. outreach: 21.45 m - Vertical articulating jib (up / down): +56.80° / -62° - Platform capacity / maximum basket load: 240 kg / 350 kg - Upper structure rotation: 360° - Platform rotation (right / left): 90° / 90° - Permitted number of persons (indoor / outdoor): 3 / 2 - Counterweight offset (upper structure at 90°): 1.43 m - Counterweight dimension / outreach: 1.45 m - Outer turning radius: 4.35 m - Travel speed – transport mode: 4.50 km/h - Travel speed – work mode: 0.80 km/h - Gradeability: 35% - Permissible inclination in work mode: 4° - Tyres: Solid rubber, vulcanised - Drive wheels (front / rear): 2 / 2 - Steering wheels (front / rear): 2 / 2 - Braked wheels / wheels: 2 / 2 - Manufacturer / engine model: Yanmar - 4TNV88C - Engine emission standard: Stage V - Rated power internal combustion engine / output: 46 Hp / 34.30 kW - Ground pressure: 21.30 dan/cm² - Hydraulic flow rate – hydraulic pressure: 400 bar - Hydraulic tank capacity: 94 l - Fuel tank capacity: 76 l - Ambient noise (LwA): < 106 dB Redpfx Aljzpbppjtecd - Hand/arm vibration exposure: < 0.50 m/s²

Stanje: rabljeno, TECHNICAL DATA - Number of spindles: 6, independently controlled - Bar capacity: 32 mm - Max. spindle speed: 6,300 rpm - Machine equipped with 28 CNC axes - Slide unit 1.1: X and Z axes CNC controlled - Slide unit 2.2: X and Z axes CNC controlled - Slide unit 3.1: X and Z axes CNC controlled - Slide unit 3.2: X and Z axes CNC controlled - Slide unit 4.1: X and Z axes CNC controlled - Slide unit 4.2: X and Z axes CNC controlled - Slide unit 5.1: X and Z axes CNC controlled - Slide unit 5.2: X and Z axes CNC controlled - Slide unit 6.1: X and Z axes CNC controlled - Slide unit 6.2: X and Z axes CNC controlled - Counter spindle at position 6.1 EQUIPMENT - Control: INDEX C200-4 (Siemens SINUMERIK 840D) - Simple NCU - Bar feeder magazine: IEMCA SIR MS32/33/P - Coolant tank: KNOLL AE 1076 Rcedjuhauyepfx Altsd * with high-pressure pump - Chip conveyor: KNOLL VRF 500 - Part evacuation with conveyor at position 6

Stanje: rabljeno, Leto izdelave: 2019, obratovalne ure: 2.920 h, nosilnost: 240 kg, tip droga: teleskopski, vrsta goriva: dizel, Leto izdelave: 2019 Rjdsxb Ay Topfx Altocd Lastna teža: 16.500 kg Skupna dovoljena masa: 16.740 kg Dimenzije (D x Š x V): 1135 x 243 x 275 cm Delovna višina: 2.775 cm

Stanje: rabljeno, Leto izdelave: 2019, obratovalne ure: 1.464 h, Funkcionalnost: popolnoma funkcionalen, lastna masa: 16.650 kg, vrsta goriva: dizel, dvižna višina: 27.730 mm, vrsta pogona: Diesel, gradbena širina: 2.480 mm, Articulating boom lift Technical condition: very good Front tyres type: solid rubber Front tyres condition: 80 – 100% Rear tyres type: solid rubber Rear tyres condition: 80 – 100% Battery condition: 80 – 100% CE certificate, Climbing ability: 40% Travel speed – transport mode: 4.50 km/h Travel speed – work mode: 0.80 km/h Permissible inclination in work mode: 4° Hydraulic pressure: 400 bar Rsdovgh S Njpfx Altocd

Stanje: pripravljen za uporabo (rabljen), rotary transfer machine RT100/12-26 Manufacturer: Pfiffner Serial number: 1101141101 Rcedpfx Alei Ewn Eeted Operating hours: 42,500 Footprint: 14m x 8m

Stanje: rabljeno, Leto izdelave: 2012, obratovalne ure: 3.795 h, konfiguracija osi: 4x4, vrsta goriva: dizel, Oprema: pogon na vsa štiri kolesa, Pogon: Kolo Drogu: Pregibna roka Dvižna zmogljivost: 350 kg Delovna višina: 2.770 cm Največji vodoravni doseg: 2.140 m Rjdpfxoya Tq Ue Altjcd Za dodatne informacije se obrnite na prodajo KEY-TEC.

Stanje: rabljeno, Leto izdelave: 2023, obratovalne ure: 595 h, konfiguracija osi: 4x4, vrsta goriva: dizel, Oprema: pogon na vsa štiri kolesa, Pogon: kolesa Lastna teža: 16.500 kg Dvižni steber: pregibna roka Dvižna zmogljivost: 350 kg Delovna višina: 2.775 cm Rjdoynfqcepfx Altscd Za več informacij se obrnite na prodajo podjetja KEY-TEC.

Leto izdelave: 1987, stanje: rabljeno, številka stroja/vozila: 7.0176, Note: We have 6 units of this machine in stock! Manufacturer: Gildemeister Type: GS 36 – 6 A/C Machine No.: 7.0176 Rcodpfxoin Ub To Altod Year of manufacture: 1987 Weight: 11 t General / Technical Data: Portal 6-spindle automatic lathe Spindle pitch circle diameter: 300 mm Number of longitudinal slides: 6 Number of cross slides: 2 Max. cross slide travel: 60 mm Max. longitudinal slide travel: 125 mm Spindle speeds: Infinitely variable 562 – 3373 rpm Main time range: Infinitely variable 1.95 – 78 sec. Nonproductive time range: 0.79 – 2.13 sec. Drive power: DC motor spindles 20 kW; feed drives 8 kW Footprint: approx. 1720 x 4700 mm Note: The machine cannot be converted for bar work. Equipment: – 1 creep feed drive for setup operation – 1 automatic central lubrication system – 1 coolant system with pipes and pump – 1 facing slide, position 3 (without cams) – 1 facing slide, position 5 – 6 longitudinal slides (without drive, without cams) – Feed for independent longitudinal slide, flexible, positions 1-6 – Programmable logic controller IPC 620 – Noise protection measures 80 dB – Automatic feed re-engagement with electric interlock on side door – Hinged belt chip conveyor – Machine version with DC drives for speed and feed – KIENZLE terminal 2450-07 with signal interface and data transmission control Accessories: Electrical configuration: The electrical equipment consists of a DC main drive with 20 kW power output for spindle drive and an AC servo motor for feed drive with 8 kW power output (protection rating IP 54), as well as the corresponding switching and control devices and necessary installation. Total connected load for the machine: 32 kW/h.

Stanje: rabljeno, Leto izdelave: 2014, obratovalne ure: 3.950 h, konfiguracija osi: 4x4, vrsta goriva: dizel, Oprema: pogon na vsa štiri kolesa, Pogon: kolo Rjdpfx Alsya Trfjtecd Dvižni steber: pregibna roka Dvižna zmogljivost: 350 kg Za več informacij se obrnite na prodajo KEY-TEC.

Stanje: rabljeno, Leto izdelave: 2013, obratovalne ure: 4.065 h, konfiguracija osi: 4x4, vrsta goriva: dizel, Oprema: pogon na vsa štiri kolesa, Pogon: kolesa Rcodpfx Aleya Tq Isted Dvižni steber: pregibna roka Dvižna zmogljivost: 350 kg Delovna višina: 2.770 cm Maks. vodoravni doseg: 2.140 m Za več informacij kontaktirajte KEY-TEC Sales.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2010, Max. workpiece diameter: 25 mm, max. workpiece length: 100 mm, max. bar diameter: 25 mm, max. X/Z travel: 42 mm / 50 mm, rapid traverse: 40 m/min, number of spindles: 6, spindle speed: 12,000 rpm, control: Siemens 840D Powerline. Rcjdpfx Aotqfq Ujltsd

Stanje: rabljeno, Leto izdelave: 2022, obratovalne ure: 1.260 h, tip droga: teleskopski, vrsta goriva: dizel, Oprema: pogon na vsa štiri kolesa, Pogon: kolo Lastna teža: 16.500 kg Dvižna zmogljivost: 350 kg Delovna višina: 2.773 cm Rsdpfoy Dnwlox Altocd Za več informacij se obrnite na prodajo KEY-TEC.

Stanje: rabljeno, Leto izdelave: 2022, obratovalne ure: 605 h, konfiguracija osi: 4x4, vrsta goriva: dizel, Oprema: pogon na vsa štiri kolesa, Pogon: kolesa Rsdpfx Aox E Nh Isltecd Lastna teža: 16.500 kg Dvižni steber: pregibna roka Dvižna zmogljivost: 350 kg Za več informacij kontaktirajte prodajo KEY-TEC.

Stanje: rabljeno, DONNÉES TECHNIQUES - Nombre d’axes : 7 - Nombre de broches : 2 BROCHE PRINCIPALE - Ø max. de la barre : 32 [mm] - Longueur maximale usinable : 250 [mm] - Vitesse de broche : 7000 [tr/min] - Incrément minimal axe C : 0,1 [deg] CONTRBROCHE - Ø max. de la barre : 32 [mm] - Vitesse de broche : 7000 [tr/min] - Nombre de porte-bagues : 2 PORTE-BAGUES 1 - Nombre de positions : 5 - Nombre de positions motorisées : 4 - Vitesse outil motorisé : 5000 [tr/min] PORTE-BAGUES 2 - Nombre de positions : 5 TOURILLON FRONTAL - Nombre de positions : 5 Rsdpfxeyhrlys Altscd OPÉRATIONS SECONDAIRES - Nombre de positions : 4 ALIMENTATION ÉLECTRIQUE - Tension d’alimentation : 380 [V] DIMENSIONS ET POIDS - Encombrement : 2150x1500 [mm] - Hauteur de la machine : 1800 [mm] - Poids de la machine : 2800 [kg] HEURES MACHINE - Heures de fonctionnement : 23 884 [h] ACCESSOIRES - Commande numérique : Fanuc - Lampe de statut tricolore - Prise de pièces - Éjecteur de pièces - Réservoir de liquide de refroidissement - Chargeur de barres hydraulique marque/modèle : IEMCA BOSS 332

Stanje: rabljeno, Leto izdelave: 2022, obratovalne ure: 905 h, tip droga: teleskopski, vrsta goriva: dizel, Oprema: pogon na vsa štiri kolesa, Pogon: kolesa Lastna teža: 16.500 kg Rcodpfx Aljy Dzinetjd Dvižna zmogljivost: 350 kg Delovna višina: 2.770 cm Za več informacij se obrnite na prodajo KEY-TEC.