Terenski viličar

Manitou M50.4 ST5

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: M50-4, Leto izdelave: 2025, nosilnost: 5.000 kg, dvižna višina: 5.500 mm, prosto dvigovanje: 1.865 mm, vrsta goriva: dizel, tip droga: triplex, gradbena višina: 2.910 mm, dolžina vilic: 1.200 mm, lastna masa: 8.325 kg, skupna dolžina: 4.948 mm, vrsta pogona: Diesel, gradbena širina: 2.080 mm, Rough Terrain Forklift Chassis number: M50-4 Fork width: 150 mm Dsdpfjwmty Rjx Ab Hskn Fork thickness: 60 mm ISO class: ISO Class 4 = 5,000 - 10,000 kg Mast type: Triplex Transmission: Torque converter, all-wheel drive Condition: New machine Technical condition: New Front tyres type: Solid rubber Front tyres size: 445/70R22.5 Front tyres condition: New Rear tyres type: Solid rubber Rear tyres size: 340/80R18 Rear tyres condition: New Description: 12 months factory warranty / Max. 2,000 operating hours 3rd valve, 4th valve, rear work lights, front work lights, diesel particulate filter, road approval (StVZO), full cabin, full free lift, CE certificate, exterior mirrors, beacon, LED, seat, 3rd & 4th hose routing to carriage, beacon halogen, reverse warning signal, mast tilt lock valve.

Stanje: zelo dobro (rabljeno), WEINIG Hydromat H23 Line, S/N 87321, year 1999, Ref-No. 103437 Dkedpfowvqklsx Ab Hjn WEINIG transverse conveyor HighMech E-1, with 6 flat chains approx. 2000 x 3500 mm Hydraulic WEINIG accelerator model 814 Short infeed table with heavy-duty 4-roller feed Planing moulder with reinforced KASCHWIG three-sided soundproof cabin • Maximum working width: 230 mm • Maximum working height: 160 mm • Electronic feed, frequency-controlled, 8 – 80 m/min • Feed motor: 18.5 kW • 1st spindle bottom: 11.0 kW • 2nd spindle right: 11.0 kW • 3rd spindle left: 11.0 kW • 4th spindle right: 11.0 kW • 5th spindle left: 11.0 kW • 6th spindle top: 15.0 kW • 7th spindle bottom: 11.0 kW • 8th spindle top: 15.0 kW • 9th spindle bottom: 15.0 kW • 10th spindle universal: 11.0 kW (4-sided) • Spindle speed: 6,000 rpm • Spindle diameter: ø 50 mm • All spindle motors equipped with NEW motor start/stop combination • Pneumatically assisted top pressure rollers • Feed rollers D=140 mm • 6 driven rollers in the table • Spindles 1 + 6 + 7 + 8 + 9 with counter bearings • Spindles 8 + 9 with straight jointer • Spindles 8 + 9 with profile jointer • Spindles 6 + 8 with pneumatic pressure • Reduced feed roller spacing • Hard-chromed table plates • Hard-chromed fences • Pneumatically assisted lateral pressure rollers • Automatic table lubrication • Centralized lubrication points • Free-standing control panel • Total connected load approx. 145 kW / approx. 400 A • Free-standing switch cabinet • Operating manual, spare parts list, and circuit diagram included • Machine without planing heads Machine dimensions approx.: • Length: 6,000 mm • Width: 2,250 mm • Height: 1,800 mm • Weight: approx. 8,500 KG Factory-new WEINIG parts used: NEW horizontal / vertical spindle NEW counter bearings All spindles with HL bearings All motors newly mounted NEW electronic motor soft start / braking units NEW hard-chromed table plates NEW hard-chromed fences Many other NEW PARTS installed in the machine Condition: see attached photos – technically in top condition Infeed mechanization unrefurbished – all parts present – operational Payment: Prior to loading, net cash Delivery time: By arrangement Delivery: EXW Inspection: Anytime by appointment Subject to prior sale and errors excepted.

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2025, obratovalne ure: 1 h, nosilnost: 5.000 kg, dvižna višina: 5.500 mm, prosto dvigovanje: 1.850 mm, težišče tovora: 600 mm, vrsta goriva: dizel, tip droga: triplex, gradbena višina: 2.870 mm, moč: 55 kW (74,78 KM), proizvajalec motorjev: Deutz, širina nosilnega okvirja vilic: 1.676 mm, dolžina vilic: 1.200 mm, širina vilic: 150 mm, debelina vilic: 50 mm, Tip prednje pnevmatike: pnevmatike (napolnjene z zrakom), velikost sprednje pnevmatike: 18-22.5 MPT-06, tip zadnje pnevmatike: pnevmatike (napolnjene z zrakom), velikost zadnje pnevmatike: 340/80 R18 XMCL, skupna masa: 8.436 kg, skupna višina: 2.490 mm, skupna dolžina: 4.950 mm, skupna širina: 2.080 mm, barva: rdeča, Oprema: CE označba, bočni pomik, kabina, osvetlitev, pogon na vsa štiri kolesa, sprednja zaščita, vilice za palete, zaščita za glavo, === KEY SPECIFICATIONS === Year of manufacture: 2025 Operating hours: 1 h Max. lifting capacity: 5,000 kg Max. lift height: 5.50 m Mast type: Triplex Fork length: 1,200 mm Side shifter: Yes Drive: Diesel Transmission: Torque converter Cabin: Enclosed Heated cabin: n/a Tyres: Pneumatic (all-terrain) Stabilizers: No Engine manufacturer: Deutz Emissions standard: Stage V Weight: 8,436 kg CE certification: Yes === HIGHLIGHTS === ✔️ 5,500 mm Triplex mast ✔️ Side shifter ✔️ Brand new machine ✔️ 55 kW Deutz Stage V engine ✔️ 5,000 kg lifting capacity ✔️ Off-road specification Dksdpfoy D Hi Hsx Ab Hen ✔️ Immediately available === CONDITION === As new condition Fully inspected and ready for immediate use === LOCATION & PRICE === Location: Sittard, Netherlands Worldwide shipping available Price on request (EXW / plus VAT) New rough terrain forklift for heavy-duty applications in construction, logistics, and industry. Equipped with triplex mast and side shifter for maximum flexibility and efficiency. All machines are fully inspected, CE certified, and ready for immediate use. === DELIVERY === Crane loading available on request Flexible transport solutions depending on destination Handled professionally by Collé Rental & Sales

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2021, obratovalne ure: 1.330 h, nosilnost: 5.000 kg, dvižna višina: 5.500 mm, prosto dvigovanje: 1.765 mm, vrsta goriva: dizel, tip droga: triplex, gradbena višina: 2.910 mm, moč: 55 kW (74,78 KM), dolžina vilic: 1.200 mm, lastna masa: 7.760 kg, skupna dolžina: 3.748 mm, vrsta pogona: Diesel, gradbena širina: 2.080 mm, All-terrain forklift Load center: 500 Fork width: 150 mm Fork thickness: 60 mm ISO class: ISO class 4 = 5,000 - 10,000 kg Mast type: Triplex Transmission: Torque converter Speed class: 20 Technical condition: very good Front tires type: Pneumatic Front tires size: AS 340/80 R18 Front tires condition: 80 - 100% Rear tires type: Pneumatic Dkodpfx Aben Hcw Ds Hen Rear tires size: AS 18-22.5 163A8 Rear tires condition: 80 - 100% Description: The M 50-4 all-terrain forklift is designed for operations in difficult terrain or areas with obstacles. With 4 driven wheels and a ground clearance of 43 cm, this forklift ensures excellent maneuverability in all conditions. A wide selection of tires is available to adapt to various surfaces, optimizing your productivity. The cab, which is suspended and accessible from both sides, offers a spacious operator’s area with ergonomic controls. The elevated driving position provides a 360° panoramic view for increased safety of the operator and surroundings. Side shift, 3rd valve, full cabin, CE certificate, - Service booklet - CE declaration - Operating manual - Spare parts manual

Stanje: kot nova (razstavni stroj), Leto izdelave: 2017, Funkcionalnost: popolnoma funkcionalen, Filter za izsesavanje prahu in žagovine. Dksdpfx Astzld Usb Hon

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2021, obratovalne ure: 2.190 h, nosilnost: 5.000 kg, dvižna višina: 5.500 mm, prosto dvigovanje: 1.765 mm, vrsta goriva: dizel, tip droga: triplex, gradbena višina: 2.910 mm, moč: 55 kW (74,78 KM), širina nosilnega okvirja vilic: 1.670 mm, dolžina vilic: 1.200 mm, lastna masa: 7.760 kg, skupna dolžina: 3.748 mm, vrsta pogona: Diesel, gradbena širina: 2.080 mm, Rough Terrain Forklift Load Centre: 600 Fork Width: 150 mm Fork Thickness: 60 mm ISO Class: ISO Class 4 = 5,000 - 10,000 kg Mast Type: Triplex Transmission: Torque Converter Speed Class: 20 Technical Condition: Normal Front Tyres Type: Pneumatic Front Tyres Size: AS 340/80 R18 Front Tyres Condition: 80 - 100% Rear Tyres Type: Pneumatic Rear Tyres Size: AS 18-22.5 163A8 Rear Tyres Condition: 80 - 100% Description: The M 50-4 rough terrain forklift is designed for operation in challenging terrains or over obstacles. With 4-wheel drive and a ground clearance of 43 cm, this forklift ensures excellent manoeuvrability under all conditions. A wide selection of tyre options is available to suit various surfaces, optimizing your productivity. The oscillating, side-access cab provides a spacious operator compartment with ergonomic controls. The elevated driving position offers a 360° panoramic view, increasing safety for the operator and surroundings. Side shifter, 3rd valve, 4th valve, heater, full cab, CE certificate, - Service booklet - CE declaration - Operating manual Dkedjw Rhb Aepfx Ab Hon - Spare parts manual

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2024, obratovalne ure: 20 h, nosilnost: 8.000 kg, dvižna višina: 4.800 mm, prosto dvigovanje: 1.570 mm, vrsta goriva: dizel, tip droga: triplex, gradbena višina: 2.780 mm, moč: 59 kW (80,22 KM), širina nosilnega okvirja vilic: 2.240 mm, dolžina vilic: 2.400 mm, lastna masa: 12.406 kg, vrsta pogona: Diesel, Dieselski viličar Težišče nosilnosti: 600 Širina vilic: 180 mm Debelina vilic: 75 mm ISO razred: Terminal West Tip droga: Triplex Menjalnik: Hidravlični pretvornik Hitrostni razred: 20 Stanje: Nov stroj Tehnično stanje: Novo Tip pnevmatik spredaj: Superelastične Stanje sprednjih pnevmatik: Nove Tip pnevmatik zadaj: Superelastične Dkedpfx Aboxr R Efj Hjn Stanje zadnjih pnevmatik: Nove Bočni pomik, nastavljive vilice, 3. ventil, 4. ventil, delovna luč zadaj, delovna luč spredaj, ogrevanje, popolna kabina, polni prosti dvig, CE certifikat, notranje ogledalo, zunanje ogledalo, rotacijska luč, sedež, sprednja in zadnja kamera.

Stanje: rabljeno, Leto izdelave: 2020, max. workpiece length: 6360 mm Milling spindle: 1 unit Main motor: 13 kW CNC control SCM CNC machining center ACCORD 40 FX for windows and doors ----- INCLUDES comprehensive range of window and door tooling including (window profiles on request!): Wooden windows IV 68, 78, 92 Wooden windows "style windows" Wood-aluminum windows Front doors Lift and slide doors Box-type windows Machine can still be inspected under power! Technical summary (detailed description on request!): ----- - Working area X-Y= 6360x1905, Z =350 - Automatic table with 8 support beams MATIC - L1825 - 5-axis spindle MAXI - Prisma T, HSK 63 E, 13 kW - RTCP setting - self-calibration system for the working unit Prisma - Chip deflector on the electrospindle, adjustable - Preparation for angle gearbox "Prisma T-S" - BRC working unit: saw blade for end processing, 1 slot for vertical milling tool 3 vertical, independent drill heads, 32 mm center distance 3 vertical drill heads (not independent), 21.5 mm center distance, for handle bore drilling 4 horizontal drill heads (2 per side, not independent), 21.5 mm center distance 2 horizontal milling heads (1 per side) - TRC 48 - rear tool magazine 48 tool positions (tool holders excluded) Pitch distance between positions 104 mm Maximum tool diameter 350 mm Maximum tool length 320 mm Maximum tool weight 10 kg (15 kg with HSK 63 E spindle) Maximum total weight on the magazine 250 kg - MACH 5 - quick-change system: Enables tool change on the electrospindle in just a few seconds. - Pendulum operation - Automatic axis lubrication - eye-M operating console with integrated PC - Additional fixed operator panel - TECPAD - remote control for machine functions - Clamping jaw preparation H145 for worktable with 8 support beams - Front stop row H110 for worktable with 8 support beams - Rear stop row H110 for worktable with 8 support beams - Vacuum block H110 145x145 mm - Vacuum block H110 145x55 mm, rotatable - Vacuum block H110 180x65 mm, rotatable - First lateral stop row H145 for worktable with 8 support beams - Second lateral stop row H145 for worktable with 8 support beams - Clamp H145 with round base Dedjy Hl Iyepfx Ab Hjkn - Clamp H145 with square base - No. 6 lifting devices with double stroke H145 - Laser and reference stop H145 for arch (left) - PRO-SPEED safety system - Maestro CNC – machine operation and programming interface - Maestro pro view – simulation software Tool sale in the condition, scope, and with accessories as available in our warehouse. Note on window profiles, tool drawings, tool system listings: Company Engelfried offers no guarantee that the existing tools match the mentioned and drawn systems. (Technical data according to manufacturer – without guarantee!)

Leto izdelave: 1900, stanje: rabljeno, Rabljeni stroj A2/35”. Minimalni premer 80 mm, največji 900 mm. Minimalna dolžina hloda 180 cm. Dkedpfx Aewqmyfob Hen Cena velja za stroj v trenutnem stanju. Podajalne verige in verižniki so lahko obnovljeni ali dobavljeni z doplačilom.

Stanje: rabljeno, Manufacturer: REWA Type: Full-body screw conveyor, supported on both ends Dkedpfxork Etuo Ab Hsn Other features: without cover, WITHOUT motor and gearbox, equipped with solids slide gate Length: 8.00 m Screw diameter: 300 mm