Teleskopska delovna ploščad

Manitou 180 ATJ

Stanje: rabljeno, Leto izdelave: 2025, skupna dolžina: 7.790 mm, · Working height: 18.19 m · Platform height: 16.19 m · Maximum lateral outreach: 10.51 m · Up-and-over clearance / Articulation point: 7.55 m · Basket jib rotation angle (ground): ±59.50° · Basket capacity: 230 kg · Superstructure rotation: 350° · Basket rotation (right / left): 90° / 90° · Number of persons (indoor / outdoor): 2 / 2 · Counterweight offset (superstructure at 90°): 0.22 m · Inside turning radius: 1.38 m · Outside turning radius: 3.75 m Nsdpex Avv Rofx Ah Iowd · Travel speed - transport mode: 5 km/h · Travel speed - work mode: 1 km/h · Gradeability: 45% · Permissible tilt in work mode: 5° · Tyres: foam-filled · Drive wheels (front / rear): 2 / 2 · Steering wheels (front / rear): 2 / 2 · Braked wheels / wheels: 0 / 2 · Manufacturer / engine model: Kubota - D1105-E4B · Engine standard: Interim Tier 4, Stage IIIA, Stage V · Rated engine power / power (kW): 24.80 hp / 18.50 kW · Ground pressure: 10 daN/cm² · Hydraulic system pressure: 340 bar · Hydraulic tank capacity: 54 l · Fuel tank capacity: 52 l · Hand/arm vibration exposure: < 0 m/s² · Daily consumption: 4.26 l · This machine complies with: European Directives: 2006/42/EC - Machinery (Recast EN 280:2013) - 2004/108/EC (EMC) - 2006/95/EC (Low Voltage)

Stanje: rabljeno, Centre height: 102 mm Centre distance: 450 mm Spindle bore: 25 mm Spindle speed: 220 - 2600 rpm Accessories have not been checked for completeness Njdpfowbi Hpjx Ah Iswd Cabinets are not included in the scope of delivery.

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2024, obratovalne ure: 135 h, nosilnost: 230 kg, lastna masa: 7.600 kg, gradbena višina: 2.530 mm, vrsta goriva: dizel, skupna dolžina: 7.770 mm, vrsta pogona: Diesel, doseg roke: 10.600 mm, gradbena širina: 2.300 mm, delovna višina: 17.650 mm, Articulating boom lift Transmission: Hydrostatic Condition: As new Nwedpfsupauqox Ah Iod Technical Condition: Very good Front tyres type: Solid rubber Front tyres size: 18 Front tyres condition: 80 - 100% Rear tyres type: Solid rubber Rear tyres size: 18 Rear tyres condition: 80 - 100% Description: The 180 ATJ articulated boom lift offers a lift capacity of 230 kg at a working height of 18.19 m. It meets all requirements for outdoor work on uneven, sloping, and congested surfaces. Its off-road capability makes it the ideal partner for construction sites with rough terrain. The new progressive hydraulic speed control reduces noise levels and fuel consumption. As with other diesel-powered platforms, the 4-wheel drive and 3 steering modes facilitate maneuvering and positioning of the machine on crowded or tight job sites. The design of the control panel ensures a clear working environment for quick operation and immediate productivity. 230 V generator and power sockets in the basket, SMS Safe Man System

Stanje: rabljeno, Leto izdelave: 2007, obratovalne ure: 5.830 h, nosilnost: 230 kg, dvižna višina: 17.650 mm, vrsta goriva: dizel, Oprema: pogon na vsa štiri kolesa, Leto izdelave: 2007 Lastna teža: 8.090 kg Njdpfxexnrcwe Ah Iswd Največja dovoljena masa: 8.320 kg Dimenzije (D x Š x V): 577 x 230 x 237 cm Steber: Zgibna roka Delovna višina: 1.765 cm

Leto izdelave: 1999, stanje: rabljeno, Tractive force – max. 6.0 t Nwsdpfx Ahed Il A Ne Ijd Ram stroke – max. 1250 mm Space requirement approx. 1.20 x 1.20 x 3.25 m

Stanje: rabljeno, Leto izdelave: 2007, obratovalne ure: 5.530 h, nosilnost: 230 kg, vrsta goriva: dizel, barva: rdeča, Oprema: pogon na vsa štiri kolesa, Lastna teža: 8.090 kg Največja skupna masa: 8.320 kg Dimenzije (D x Š x V): 577 x 230 x 237 cm Tip motorja: Perkins Perkins Steber: Zgibna roka Delovna višina: 1.765 cm Nwodpfx Aheyg Hyis Ied

Stanje: rabljeno, Leto izdelave: 2007, obratovalne ure: 6.060 h, nosilnost: 230 kg, vrsta goriva: dizel, Oprema: pogon na vsa štiri kolesa, Prostornina motorja: 1.498 cm³ Lastna teža: 8.090 kg Skupna dovoljena masa: 8.320 kg Dimenzije (D x Š x V): 577 x 230 x 237 cm Tip motorja: Kubota Perkins Nwjdpfx Aeydl Rzeh Ied Dvigalo: Priklopno krak Delovna višina: 1.765 cm

Leto izdelave: 1993, stanje: dober (rabljeno), številka stroja/vozila: 03.2370, Manufacturer: Arthur Klink Model: RISZ 10 x 1000 x 400 Year of manufacture: 1993 Weight: 6,500 kg (total) Machine No.: 03.2370 General / Technical Data: Used vertical hydraulic internal broaching machine with automatic workpiece feed for 2 workpieces, in good condition Pulling force: 10,000 kg Broaching length: 1000 mm Broaching stations: 3 units Distance between broaching stations: 125 mm Draw head holder diameter: 3 x Ø 80 mm Clear width between cylinders: max. 435 mm Cutting speed: hydraulically infinitely variable from 1 m/min up to max. 10.9 m/min Return speed: hydraulically infinitely variable from 5 up to max. 27.5 m/min Machine dimensions (W x D x H): approx. 5500 x 2800 x 4900 mm Power supply / connected load: 380 Volt, 50 Hz / 38 kW Accessories / Special Equipment: Nwjdpfecc D Ddsx Ah Ied The machine is equipped with a workpiece table and a traverse support for 3 broaching stations. Furthermore, the machine features an automatic workpiece feeding system for 2 workpieces. Clamping of the shank and end-piece holders is hydraulic. The machine includes a coolant system with an integrated magnetic chip conveyor, enabling operation without the need for a special foundation (pit). Remarks: The machine is designed for use in large-scale series production. It is in very good condition and still has its original paint. The machine can be inspected under power in our warehouse.

Stanje: rabljeno, Leto izdelave: 2024, skupna dolžina: 7.790 mm, · Working height: 18.19 m · Platform height: 16.19 m · Maximum lateral outreach: 10.51 m · Up-and-over clearance / Articulation point: 7.55 m Nwsdpfx Ahsx Avu Te Iod · Basket jib rotation angle (ground): ±59.50° · Basket capacity: 230 kg · Superstructure rotation: 350° · Basket rotation (right / left): 90° / 90° · Number of persons (indoor / outdoor): 2 / 2 · Counterweight offset (superstructure at 90°): 0.22 m · Inside turning radius: 1.38 m · Outside turning radius: 3.75 m · Travel speed - transport mode: 5 km/h · Travel speed - work mode: 1 km/h · Gradeability: 45% · Permissible tilt in work mode: 5° · Tyres: foam-filled · Drive wheels (front / rear): 2 / 2 · Steering wheels (front / rear): 2 / 2 · Braked wheels / wheels: 0 / 2 · Manufacturer / engine model: Kubota - D1105-E4B · Engine standard: Interim Tier 4, Stage IIIA, Stage V · Rated engine power / power (kW): 24.80 hp / 18.50 kW · Ground pressure: 10 daN/cm² · Hydraulic system pressure: 340 bar · Hydraulic tank capacity: 54 l · Fuel tank capacity: 52 l · Hand/arm vibration exposure: < 0 m/s² · Daily consumption: 4.26 l · This machine complies with: European Directives: 2006/42/EC - Machinery (Recast EN 280:2013) - 2004/108/EC (EMC) - 2006/95/EC (Low Voltage)

Stanje: rabljeno, Leto izdelave: 2007, obratovalne ure: 6.450 h, moč: 26 kW (35,35 KM), nosilnost: 230 kg, vrsta goriva: dizel, Oprema: pogon na vsa štiri kolesa, Leto izdelave: 2007 Prostornina motorja: 1.498 cc Lastna teža: 8.090 kg Skupna dovoljena masa: 8.320 kg Dimenzije (D x Š x V): 577 x 230 x 237 cm Dvižni steber: Pregibna roka Delovna višina: 1.765 cm Njdexg Iycjpfx Ah Iswd Povprečna poraba goriva: 4 l/100km

Stanje: rabljeno, Leto izdelave: 2010, Maximum turning diameter: 320 mm Turning length: 810 mm Control: MSX 701 Maximum spindle speed: 6,000 rpm Nwodpfx Aev E R E Aoh Ied Drive power – main spindle: 22 / 18 kW Maximum usable bar diameter: 52 mm C-axis: 0.001° Spindle nose: JIS A2-5 Collet chuck: 140 mm Maximum spindle speed: 6,000 rpm Drive power – sub spindle: 22 / 18 kW Maximum usable bar diameter: 52 mm C-axis: 0.001° Spindle nose: JIS A2-5 Collet chuck: 140 mm Number of tool stations: 16 positions Number of driven tool stations: 16 positions Speed range – driven tools: max. 6,000 rpm Drive power – driven tools: 7.5 / 5.5 kW Y-axis travel: 110 mm Number of tool stations: 16 positions Number of driven tool stations: 16 positions Speed range – driven tools: max. 6,000 rpm Drive power – driven tools: 7.5 / 5.5 kW X-travel 1/2: 210 mm Y-travel: 110 mm Z-travel 1/2: 810 mm B-axis: 900 mm Total power requirement: 86 kVA Machine weight approx.: 8.1 t Space requirement approx.: 8.0 x 3.5 x 2.8 m CNC Turning and Milling Center MORI SEIKI - NZ 1500 T2Y - Main and sub spindle - 2 turrets, upper and lower - Y-axis - 2x 16 driven tool positions

Stanje: zelo dobro (rabljeno), Leto izdelave: 2019, obratovalne ure: 1.183 h, moč: 18 kW (24,47 KM), vrsta goriva: dizel, barva: drugo, Splošne informacije Leto proizvodnje: 2019 Nedpfjykimajx Ah Iowd Tehnične informacije Pogon: kolesa Tip motorja: Kubota V1505-EU1 Lastna teža: 7.414 kg Dimenzije (D x Š x V): 556 x 232 x 247 cm Funkcionalno Steber: pregibna roka Nosilnost: 230 kg Delovna višina: 1.818 cm Največji doseg: 1.051 cm CE oznaka: da Stanje Tehnično stanje: zelo dobro Vizualno stanje: zelo dobro Pogonski sklop Standard / faza: Stage V / Tier IV final Splošno Država proizvodnje: Francija Stanje Tip CE: CE

Stanje: rabljeno, Leto izdelave: 2022, obratovalne ure: 525 h, konfiguracija osi: 4x4, vrsta goriva: dizel, Oprema: pogon na vsa štiri kolesa, Pogon: kolo Lastna teža: 7.470 kg Dvižni steber: pregibna roka Dvižna zmogljivost: 230 kg Nwedpoyhvccofx Ah Iod Delovna višina: 1.765 cm Za več informacij se obrnite na prodajo KEY-TEC.

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2025, obratovalne ure: 10 h, Funkcionalnost: popolnoma funkcionalen, merilno območje os X: 200 mm, merilno območje osi Y: 200 mm, merilno območje os Z: 200 mm, trajanje garancije: 12 meseci, potovalna razdalja osi X: 200 mm, pomik osi Y: 200 mm, pomik po osi Z: 200 mm, vhodna napetost: 230 V, dolžina podajanja os X: 200 mm, dolžina pomika po osi Y: 200 mm, dolžina podajanja os Z: 200 mm, Oprema: Na voljo je tipska ploščica, dokumentacija / priročnik, osvetlitev, Completely overhauled multisensor measuring device Mahr MS 222 (optical measuring instrument) LIKE NEW, including acceptance certificate prior to delivery and free shipping within Germany* Factory-refurbished premium multisensor measuring center with warranty and guarantee, rebuilt in 2025. INCLUDES latest software update, 18 months of free software update service, free lifetime software hotline and user support. Delivery with factory service or via shipping company, worldwide delivery possible! Online or on-site demonstrations with customer parts as well as application-specific consulting provided by accredited Profitech inspection laboratories during project planning. Complete service available upon request: – Delivery, installation, commissioning, norm-compliant accuracy verification, certification, and comprehensive acceptance documentation. Customized training programs also available as online courses. Rental, hire-purchase, or financing available directly via Profitech, with no bank required. Measuring device can be configured individually to customer needs. Measuring range: 200 x 200 x 200 mm Load capacity (glass plate): 10kg Scale resolution: 0.1μm Max. traverse speed: 150mm/s Dimensions: 900 x 750 x 950mm Machine weight: 170kg Control cabinet weight: 90kg Length measurement uncertainty: According to VDI/VDE 2617-6 E2 (X,Y) = (3.2 + L/125) μm Optional extension: Renishaw probe system (TP20, TP200, SP25) available on request Retrofit 2025 Including PC and software Maximum traverse speed: 150mm/s Dimensions: 900 x 750 x 950 Weight: approx. 90 kg Nwsdpfx Ajglp Nqeh Ied Sample image by manufacturer *Commissioning, on-site calibration, and training are not included

Stanje: rabljeno, Leto izdelave: 2017, obratovalne ure: 1.618 h, konfiguracija osi: 4x4, vrsta goriva: dizel, Oprema: pogon na vsa štiri kolesa, Pogon: kolo Lastna teža: 7.550 kg Dvižni steber: pregibna roka Dvižna zmogljivost: 230 kg Delovna višina: 1.765 cm Nsdpsyhvb Ssfx Ah Iewd Za dodatne informacije se obrnite na prodajo KEY-TEC.