Tovornjak prekucnik

MAN TGS (TG3) 33.470 6x6 H BL 6x6H, Anh.-kipphydraul

Stanje: novo, Cutting diameter round: 900 mm Cutting diameter square: 900 mm Cutting diameter flat: 900x900 mm Saw band length: 9300 x 67 x 1.1 mm Table height: 790 mm Band speed: 14 - 60 m/min Total power requirement: 11 kW Machine weight approx.: 8.45 t Dimensions (L x W x H): 4,485 x 1.68 x 3.15 m Pgedpefg E Hpjfx Adyjg The semi-automatic, hydraulic saws of the X-tech line offer top-tier sawing technology and maximum performance when cutting specialty steels. - The electro-welded machine frame and the steel saw frame meet all cutting requirements and eliminate vibrations and noise. - The chip conveyor is hydraulically driven and the speed is adjustable. - All machine motions (saw frame, vice, feed, saw band guides) are enabled by modern linear guides with high static and dynamic load capacity, guaranteeing very low sliding friction. - Another key feature is the material positioning rollers, which are powered by a hydraulic motor. These move at a right angle to the material, allowing for optimal clamping. - Thanks to the saw band position height control, the operator can position the band close to the material’s upper edge. After cutting, the band automatically returns to the previous position; alternatively, the 'remain' option in the lower position can be selected. During the cutting cycle, the software compares cutting force with preset values and can stop the sawing system in case of irregularities. - The saw band is cleaned by two adjustable steel brushes, which are hydraulically driven. - The hydraulic unit, including filter and manometer, ensures especially smooth operation at constant pressure. - Precision ground carbide inserts clamp the saw band, complete with lateral, hardened, and adjustable guide rollers. The adjustable band guide automatically moves as close as possible to the material. - The saw band is tensioned by a hydraulic cylinder, controlled by the machine software. Tension is automatically released after a preset time when the machine is idle or after a cycle is completed. - Automatic version with CNC control available for the X-TECH 900 / 1200 models with a feed length of 500 mm for high production series. - The material is supported by a table with seven rollers, powered by a hydraulic orbital motor, allowing precise material positioning even under maximum load. - All guided motions are facilitated by four ball circulation guides with high static and dynamic load capacities; significantly reduced feed friction. Hardened and ground prismatic guides. Price on request.

Stanje: novo, lastna masa: 5.500 kg, skupna masa: 19.500 kg, konfiguracija osi: 1 os, dolžina tovornega prostora: 11.800 mm, širina tovornega prostora: 2.550 mm, višina nakladalnega prostora: 1.100 mm, vzmetenje: zrak, velikost pnevmatike: 215 75 17,5, Oprema: žerjav, KALEPAR TRAILER - KLP 119V2 TRUCK TRANSPORTER - 1x 9-ton SAF or BPW axle - 100% galvanized - Gross vehicle weight (GVW): 19,500 kg - Unladen weight: approx. 5,500 kg - Wabco 2S-2M EBS braking system - Aspöck 24V electrical system - EU standard - Air suspension - Hydraulic cable winch Hammerwinch 8 t with radio remote control (Teleradio) - Hydraulic rear extension, full width 2550 mm x length 1500 mm - Length: 11,800 mm - Length with extension: 13,300 mm - Width: 2,550 mm Pgedpfskbyt Ijx Adysg - Fifth wheel height: approx. 1,050 mm - 1,150 mm (other heights possible) - Tire brands: Goodyear, Pirelli, or Continental with twin tires - Spare wheel with mounting bracket - 24V 4.5kW electro-hydraulic motor for winch, loading platform, and rear extension - Custom modifications available on request - Choice of paint finish free of charge - All documents (COC, TÜV, etc.) for registration available For more info: kalepar *The pictures are for illustration purposes only. Copyright cannot be claimed.

Stanje: novo, prevoženi kilometri: 10 km, moč: 132 kW (179,47 KM), vrsta goriva: dizel, skupna masa: 3.500 kg, barva: bela, vrsta prenosa: mehanski, število sedežev: 3, dolžina tovornega prostora: 3.900 mm, širina tovornega prostora: 2.040 mm, višina nakladalnega prostora: 400 mm, Oprema: ABS, centralno zaklepanje, elektronski program stabilnosti (ESP), filter saj, klimatska naprava, German new vehicle: * Without registration * Euro 6 * 6-speed gearbox Pgedpfsnq Eh Uex Adysg * 3 seats * Gross vehicle weight: 3,500 kg * ABS + ESP * Driver airbag * Cruise control * Reinforced rear axle springs * DAB radio with Bluetooth and steering wheel controls * Central locking with remote control * Electric windows * Electrically adjustable/heated exterior mirrors * Tow bar with 3,000 kg towing capacity Three-way tipper: * Subframe: steel, hot-dip galvanized * Floor: galvanized steel plate * Operation: electro-hydraulic with remote control * Aluminium side panels, 40 cm high * Removable mesh side extension, 58 cm high, swinging * Lashing rings in the floor * Internal dimensions approx. LxWxH 390x204x40 cm Load securing equipment also available from us: * Tension and lashing straps * Load bars * Hi-vis vests * Transport boxes * Edge protectors * Dunnage bags * Wheel chocks * etc. Financing and leasing available We manufacture bodies of any size for any chassis: Tarpaulin, GRP sandwich, aluminium light alloy Visit us at: Bodies – ready-to-drive complete vehicles – trailers – consulting – financing Errors and prior sale reserved; no liability for printing or entry errors.

Stanje: dober (rabljeno), Tailstock Podpfodlp Txjx Adysgg Quill size: MT 2 Quill stroke: 30 mm Height adjustable Centre height: 250 – 285 mm Adjustable tilt: -5° to +15° Base dimensions: 230 x 155 mm Weight: 27 kg

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, lastna masa: 7.200 kg, največja dovoljena obremenitev: 30.800 kg, skupna masa: 38.000 kg, konfiguracija osi: 3 osi, prva registracija: 09/2017, dolžina tovornega prostora: 9.800 mm, širina tovornega prostora: 4.500 mm, prostornina tovornega prostora: 48 m³, vzmetenje: zrak, velikost pnevmatike: 315.80 r 22.5, barva: modra, Leto izdelave: 2017, Oprema: ABS, Semirimorchio Tecnokar, anno 2017, vasca ribaltabile in alluminio da 48 m³, equipaggiato con 10 pneumatici, 3 assi a disco con primo asse sollevabile e terzo asse sterzante, sistema EBS, copri-scopri elettrico scorrevole, cassettoni in acciaio inox, cerchi in lega, portellone basculante a bandiera con tenuta stagna. Veicolo in ottime condizioni. Rivenditore: Interdrive Srl - Parma. Pgsdpfxotvplce Adysg

Stanje: novo, lastna masa: 11.000 kg, največja dovoljena obremenitev: 25.100 kg, skupna masa: 36.100 kg, konfiguracija osi: 3 osi, vzmetenje: zrak, velikost pnevmatike: 215 75 17,5, KALEPAR TRAILER - KLP 334V3 TRUCK TRANSPORTER 3x SAF axles (1st axle: lift axle, 2nd axle: fixed, 3rd axle: steering axle) Gross weight: 36,100 kg Podpfx Askqmuisdyjgg Payload: 25,100 kg Unladen weight: 11,000 kg Total length: 13,600 mm + 1,700 mm Hydraulic rear extension, length: 1,500 mm Central extension up to 1,700 mm Braking system: Wabco 2S-2M Electrical system: Aspöck Systems Air suspension Full-width hydraulic rear extension: 2,550 mm wide, 1,500 mm long Trailer fully galvanized (100% galvanized) Tire size: 215/75 R 17.5 Tire brands: Pirelli, Goodyear, Fulda, Continental Fifth wheel height: approx. 950 mm - 1,150 mm (other heights available upon request) 24V 4.5 kW electro-hydraulic motor Steel ramps: 2 units Modifications according to customer requirements possible. Paintwork freely selectable / free of charge. Net export possible. All documents for registration (COC, TÜV, etc.) available.

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, lastna masa: 7.900 kg, največja dovoljena obremenitev: 30.100 kg, skupna masa: 38.000 kg, konfiguracija osi: 3 osi, prva registracija: 09/2007, dolžina tovornega prostora: 10.000 mm, širina tovornega prostora: 2.450 mm, višina nakladalnega prostora: 2.200 mm, prostornina tovornega prostora: 60 m³, vzmetenje: zrak, velikost pnevmatike: 385.65 r 22.5, barva: srebrn, Leto izdelave: 2007, Oprema: ABS, SMR tipper trailer with 60m³ Technokar aluminum body, rear unloading with sealed swing tailgate, front-mounted moto-vibro, 3 disc-braked axles with the 1st liftable and steering, hydraulic couplings, manual sliding tarpaulin cover, stainless steel toolbox, air suspension, year 2007, inspected until 30/11/2024 - DEALER INTERDRIVE SRL - PARMA Pgedpfxetpm Tmj Adyeg

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, prevoženi kilometri: 20 km, moč: 140 kW (190,35 KM), vrsta goriva: dizel, vrsta prenosa: samodejen, medosna razdalja: 4.325 mm, skupna masa: 3.500 kg, kapaciteta rezervoarja za gorivo: 93 l, emisijski razred: Euro 6, barva: črn, število sedežev: 8, Leto izdelave: 2025, gorivo: dizel, številka stroja/vozila: NEW-36, Oprema: ABS, airbag, centralno zaklepanje, dodatne luči, drsna vrata, elektronski program stabilnosti (ESP), filter saj, klimatska naprava, letne pnevmatike, meglenke, nadzor oprijema, navigacijski sistem, nizka raven hrupa, parkirni grelec, parkirni senzorji, računalnik na krovu, registracija tovornjaka, registracija vozila, servovolan, sistem za imobilizacijo, spojka prikolice, tempomat, MB Sprinter 319 Bluetec - BusConcept Premium 2025 - Število sedežev: 8/ 6+2 Novo vozilo. Brez registracije z 2-letno garancijo. Vozilo ima vso potrebno dokumentacijo in evropski certifikat COC. Od leta 2005 smo prisotni na evropskem trgu in specializirani za proizvodnjo luksuznih avtobusov za prevoz potnikov in gospodarskih vozil. Naše podjetje ponuja izdelke po meri, narejene iz vrhunskih materialov in z uporabo sodobnih tehnoloških rešitev. Naš cilj je postavljati nove trende v panogi, spodbujati poljsko inženirstvo ter ustvarjati nepozabna in legendarna potovalna doživetja. Celotna oprema na zahtevo. Fotografije so primer naročenega vozila. Za vsa vprašanja sem vam na voljo kadarkoli. Dobavljivo v 2-3 mesecih. Podpfx Aji Ei Syodysgg - Kontaktirajte nas: Auto-Wardenga Irenäus Wardenga, dosegljiv tudi preko WhatsAppa.

Stanje: novo, Cutting range at 90°: round 680 mm Cutting range at 90°: square 640 mm Cutting range at 90°: rectangle 1250x600 mm Saw band length: 8140x54x1.6 mm Band speed: 15 - 90 m/min Table height: 855 mm Pgsdsfgyigopfx Adyeg Total power requirement: 7.5 kW Machine weight approx. 4.96 t Space requirement approx. 5.7 x 4.0 x 2.75 m 2-column bandsaw for fast cutting, K-tech 1200H with pusher system P 30. P 60 (optional). Fast, smooth, and ergonomic cutting Specially designed for cutting profiles and beams as well as solid material. The material is clamped vertically on both the infeed and outfeed sides. Starting from model K-tech 800 H, the machine is equipped as standard with an additional horizontal vice. The interplay of hydraulic saw frame descent, material positioning, and the pusher system is CNC-controlled. The machines are equipped as standard with the environmentally friendly "B&S Clean Cut" cutting system with minimum quantity lubrication. This reduces cleaning requirements and conserves resources. CNC control A CNC control system allows programming of up to 90 cutting programs with different cut lengths, quantities, and mitre angles. The B&S pusher system, feeding and positioning unit, is equipped with 'double-sided opening clamping jaws' which are hydraulically operated. This ensures secure gripping and transportation of materials and bundles that may deviate somewhat from the ideal shape. The pusher system is built separately and is guided via ball-bearing linear guides, precision-ground rack, and a frequency-driven, robust geared motor.

Stanje: rabljeno, Leto izdelave: 2022, 510 mm serrated disc section, hydraulic working depth adjustment for disc section / working depth adjustment for leveling unit C-Mix-Ultra tines for Ceus 50 / hydraulic working depth adjustment for tine section with hydraulic drawbar, HD share 80 mm / (14/K1) Pedpetz Tplefx Adysgg