Tovorno vozilo za posebne namene

man LE 1608 KOMMUNAL KROLL BY SFZ - Rechtslenker

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2007, potovalna razdalja osi X: 4.600 mm, pomik osi Y: 1.935 mm, pomik po osi Z: 275 mm, število osi: 5, This 5-axis Biesse Rover C9.50 was manufactured in 2007. It offers a large working area (X=4600 mm, Y=1935 mm, Z=275 mm), an automatic lubrication system, and a control unit for 5-axis interpolation. The machine is equipped with a vacuum system, a conveyor belt for chip extraction, and liquid cooling. If you are looking for high-quality CNC machining capabilities, you should consider the Biesse Rover C9.50 that we have for sale. Contact us for more information. Work Table and Clamping • 8 ATS panel holders (L = 1525 mm) and 24 sliding rails • Automatic positioning of panel holders and sliding rails (EPS X-Y) • Pneumatic locking system, divided into 2 working areas in X • 8 rear reference stops, stroke 115 mm • 8 stops, stroke 140 mm, positioned at 1175 mm (L = 1280 / 1525 / 1800 mm) • 8 stops, stroke 140 mm, positioned at 770 mm (L = 1280 / 1525 / 1800 mm) • 4 side stops, stroke 140 mm (2 left + 2 right) with pneumatic system • 4 removable middle stops, stroke 140 mm (2 left + 2 right) with pneumatic system • Sensor for detecting lowered stops • Pneumatic system for lifting bar holders • 6 lifting bar holders for easy loading (H = 74 mm modules) Vacuum • Vacuum system for a 250 m3/h pump • 250 m3/h rotary vane vacuum pump for the standard vacuum system Machining Units and Configuration • C3-A1 composition: • Device for mounting chip deflectors with pneumatic or inductive sensors on a 5-axis machining unit • Flange for mounting units on a working unit with 5 interpolating axes (units only usable when the electric spindle is vertical) • C3-P2 composition: • Additional Z-carriage for rear machining units, controlled by an independent Z-axis • 16 vertical and 4 horizontal drilling spindles in Y-direction • Chain tool changer with 22 positions (180 mm center distance) Bledpfx Acsx D H Hcjmoh • Iron gripper for chip deflector with pneumatic or inductive sensor, located in the chain tool changer • RH chip deflector with inductive sensor for standard electric spindle or 15 kW 5-axis electric spindle (requires device for chip deflector; requires flange for mounting units when using a 5-axis electric spindle; requires C-axis when using a standard electric spindle) Systems • Automatic lubrication system • Control unit with 5 interpolating axes Additional Equipment • Additional overhauled 5-axis main spindle available • Conveyor belt for chips and scrap (chip conveyor) • Liquid cooling unit for liquid-cooled systems (can cool two electric spindles or one electric spindle plus a liquid-cooled drilling head) Note: The technical specifications and descriptions are taken from the original order confirmation and are for informational purposes only; they are not binding.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2005, Prodajam drobno-rezno mini žago NEVA TR88 Orbit plus, letnik 2005. Konfiguracija z rezkalnimi glavami zgoraj + spodaj 1,5 + 1,5 kW, primerna tudi za kasnejšo proizvodnjo lepljenih lamel. Glavni motor 15 kW Delovna višina 255 mm Digitalno nastavljanje delovne višine z ELGO električnim pozicionerjem. Digitalno nastavljanje podajalne hitrosti z MKS. Skupna teža 2800 kg. Bedpfxeiuc Sco Acmslh Veliko dodatne opreme, žagine liste in nastavitvene elemente z nastavitveno napravo vključno. Stanje zelo dobro. Popolnoma delujoč stroj. Izdelano na Češkem.

Stanje: rabljeno, Leto izdelave: 1997, številka stroja/vozila: 15109, Funkcionalnost: popolnoma funkcionalen, moč: 1 kW (1,36 KM), Oprema: CE označba, Prodajam korpusno stiskalnico RAMARCH PN31. Leto izdelave: 1997. Največje dimenzije obdelovanca: 2500 x 1300 x 600 mm. Elektropnevmatsko upravljanje. Proizvajalec: RAMARCH, Španija (sedaj DYNMA). V dobrem stanju. Takoj na voljo. Bsdpfx Aolu Hhcecmolh

Stanje: zelo dobro (rabljeno), Leto izdelave: 1999, H+K Four-Sided Planer and Thicknessing Machine Quadroplan 180 Planing width: 20 - 180 mm Planing height: 5 - 120 mm Infeed table length: 2,100 mm Separate motor for each spindle Motor upper spindle: 5.0 kW Motor lower spindle: 4.0 kW Motor left spindle: 4.0 kW, automatic floating head Motor right spindle: 4.0 kW Max. spindle speed: 6,000 rpm Spindle diameter: 30 mm Max. feed speed: 8 m/min Cardan feed Feed motor power: 0.75 kW Total connected load approx. 18.0 kW, 400 V, 50 Hz Bsdpfoydmawox Acmjlh Extraction connections: 2 x 120 mm, 1 x 140 mm, 1 x 160 mm Dimensions (L x W x H): 3370 x 1330 x 1500 mm Weight approx. 1,280 kg Electromotive adjustment of planing height with digital display Electromotive adjustment of planing width with digital display Pneumatic spindle locking Non-driven outfeed roller Automatic centralized lubrication Automatic star-delta starter INCLUDES 4 reversible-knife cutterheads INCLUDES operating manual & wiring diagram CE-certified All ball bearings NEW All V-belts NEW Note on used machines: • Technical data may be subject to errors and prior sale. • Prices quoted are ex works - free loading at location! • The machine has been cleaned and tested for functionality. • All machines are sold as inspected without any guarantee or warranty claims. Potential buyers are welcome to inspect the machines on site. • Special agreements are only valid if made in writing. (Inquiries will be answered only if you provide your address and phone number!)

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2010, število osi: 4, This 4-axis HOMAG BAZ 211/40K was manufactured in 2010. It features a vacuum clamping system with multiple configurations, a high-performance vacuum pump, and a Flex5+ saw, routing, and drilling unit. The machine is equipped with three tool changers and an edge banding package for advanced processing capabilities. If you are looking for a high-quality CNC woodworking machine, you should consider the HOMAG BAZ 211/40K that we have for sale. Contact us for more details. • Vacuum Clamping System: 8x 120x50 mm (0/90°) K-table • Rotatable Vacuum Clamping System: 8x 125x75 mm (360°) K-table • Vacuum Pump: Reinforced, 100/140 m³/h • Unit: Flex5+ saw, routing, and drilling unit for tool changers (WZW) • Tool Changer: 3x tool holder for Flex5+ (WZW) • Edge Banding Package: Power EDGE 360° for BAZ 211/311 Venture • Edge Processing: Workpiece edge blow-off nozzle • Routing/Scraping: Combined flush-trimming and scraper unit (WD 60 mm) Blsdpfey Hrr Esx Acmjh • Profile Knives: 2x for scraper • Radius Milling Cutter Head: 2x WPL radius cutter head • Material Handling: Tool transfer station for B200/300/K • Software: Upgraded to woodWOP 6.0

Stanje: rabljeno, Leto izdelave: 1991, Rabljeni stroj Letnik izdelave: 1991 Bodpfx Asw I U N Iocmelh Stroj je popolnoma servisiran in preverjen Delovna širina: 1100 mm Delovna višina: 140 mm Nastavitev višine: električna Prikaz debeline obdelovanca: digitalni Število agregatov: 2 1. agregat: Kombinirani agregat (valj - čevelj) z elektronskim segmentnim brusnim čevljem 2. agregat: Čeveljni agregat, elektronski segmentni čevelj z vakuumskim transportnim trakom Krtača za odstranjevanje prahu: da Moč motorja: 2 x 15 kW Poraba toka: 65A Priključek za odsesavanje: 4 x 200mm Brusni trakovi 1120 x 1900 Teža: 3500 kg Razpoložljivost: kratkoročno Lokacija zaloge: Hochheim

Stanje: rabljeno, Leto izdelave: 2001, obratovalne ure: 1 h, prevoženi kilometri: 245.000 km, moč: 206 kW (280,08 KM), vrsta goriva: dizel, gorivo: dizel, emisijski razred: Euro 3, Purpose of use: Grounds management Unladen weight: 18,000 kg Please contact Emal Jaweed for further information. Mercedes Benz Atego 1828 Sweeper, first registration: 29/06/2001, manual transmission, air conditioning, Bucher Schörling Optifant 70, sweeping width: 2,100 mm, container capacity: 7 m³, water tank capacity: 1,500 l, engine output: 75 kW, Euro 3, unladen weight: 11,540 kg, gross weight: 19,000 kg. Other information: * We offer over 200 units for sale. * Our location is 30 km north of Frankfurt/M Airport. * Financing & leasing available. * Specialist for worldwide transport & shipping. * No liability for printing or typing errors. * Subject to errors and prior sale. * Trade-in possible! * Only the general terms and conditions (AGB) of Jaweed GmbH apply to vehicle purchases/used machinery sales. Bljdpfx Ajx R U Svjcmjh * Further information and our terms and conditions can be found on our website. We are selling our goods subject to our general terms and conditions (listed: ... / AGB)

Stanje: kot nova (razstavni stroj), Leto izdelave: 2017, Conveyor belt / belt conveyor Bsdpfxjf Rlgko Acmolh Belt width: approx. 300 mm Center distance: approx. 3,130 mm Drive: 0.75 kW Like new – only used very briefly

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, dolžina rezanja (maks.): 3.500 mm, največja višina reza: 40 mm, vrsta vhodnega toka: trifazni, premer žaginega lista: 180 mm, – zelo dobro stanje TEHNIČNI PARAMETRI: – dolžina reza: 3500 mm – višina reza: 40 mm – širina reza na desni strani: 960 mm – motor žaginega lista: 3 kW – motor rezkarja: 1,5 kW – motor podajanja: 0,75 kW – brezstopenjska nastavitev hitrosti rezanja – premer žaginega lista: 180 mm – premer rezkarja: 70 mm Blodpfxjw I Efge Acmeh – premer priključka: 100 mm – zgornja pritisna letev – samodejni pomik rezkarja – možnost ročnega ali samodejnega rezanja – dimenzije (d/š/v): 530 / 205 / 130 cm – teža: ~ 800 kg