Kombiniran vozilo s ponjavo

MAN 8.174 L2000 Pritsche+Plane+LBW DOKA

Leto izdelave: 2024, stanje: novo, oris - Mini Extruder ESE 20/25 D Technical Data Screw diameter [mm]: 20 Screw length [L/D]: 25 Screw speed [rpm]: 20–200 Screw axial pressure [bar]: 300 continuous load, 350 maximum Drive: Three-phase motor with frequency inverter Drive power [kW]: max. 2.5 Reduction gearbox with integrated axial bearing Weight [kg]: approx. 160 Dimensions [L x W x H, mm]: approx. 1050 x 600 x 1590 Iodpehx Elfofx Abxeic Electrical connection: 3 / N / PE Supply voltage [V]: 400 at 50 Hz Control voltage [V]: 230 Temperature control with electric resistance heating bands in mica design. Max. processing temperature [°C]: 300 Control cabinet and operator panel The extruder’s electrical installation is housed within the machine base. The base contains all necessary switching, control, and display devices. The feed zone is water-cooled; water connection must be provided by the customer, and a separate chiller for water cooling is not included in the offer. Extruder tooling is not included in the scope of supply.

Stanje: dober (rabljeno), Leto izdelave: 1981, Funkcionalnost: popolnoma funkcionalen, HITRI DVOKRATNI HLADNI STISKALNICI NATIONAL M5 Za proizvodnjo delno preluknjanih delov Popolnoma delujoča Pravkar servisirana! Nova električna napeljava. Ijdpetxni Nefx Abxsic Število matric: 1 Število kosov na minuto: 300 Dolžina zakovice: 20 mm Globina preboja (max): 5 mm Premer reza: 5 mm Tlorisna širina: 1.300 mm Tlorisna dolžina: 2.690 mm Moč glavnega motorja: 7,5 KW Neto teža: 3.100 kg Bruto teža: 3.700 kg.

Leto izdelave: 2023, stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, Naš kompaktni ekstruder model EX20-25d Proizvajalec: PMH GmbH Premer polža [mm]: 20 Dolžina polža [L/D]: 25 Isdpfsq R Tkwjx Abxoic Hitrost vrtenja polža [min-1]: 10–192 Polž: nitriran Navor: 55 Nm Pogon: trifazni motor s frekvenčnim pretvornikom Pogonska moč [kW]: 1,1 kW Material cilindra: nitriran Električne priključne vrednosti: 3 / N / PE Napajalna napetost [V]: 400 V pri 50 Hz Krmilna napetost [V]: 24 V Keramični grelni trakovi [W]: 1200 W Število grelnih trakov: 3 Maksimalni iztis: pribl. 5 kg/h Maksimalna procesna temperatura [°C]: 300

Stanje: zelo dobro (rabljeno), Leto izdelave: 2004, Wide slot die Serial No.: L 1081-041391 // Smoothing unit Serial No.: F 1201-041392 Take-off unit Serial No.: F 1201-041392-T Max. winder speed: 50 m/min. Type: Film line with 1080 mm usable width Equipment / Further details: Iedpfx Abjw Tbr Hjxsic Max. gross PP output up to 1000 kg/h with film width up to 1200 mm Special feature: winder system allowing the slitting of narrow films (150 mm - 100 mm) or, for example: 8 x 175 mm or 2 x 700 mm A die lip for maximum film thickness up to 2 mm, up to 1000 kg/h. Total power consumption: 211 kW/h Main motor capacity: 250 kW Min. film thickness in PS: 0.68 mm / Min. in PP: 0.75 mm Maximum calender speed: 50 m/min mechanically possible Consisting of: - Maguire 5-compartment dosing unit - Extruder (screw dia. 160 mm) Amut EA 160 // Year: 2003 - Screen changer (for cleaning in food production) - Melt pump - Wide slot die (1 insert) 120 cm - Die lip for film thickness up to 2 mm, up to 1000 kg/h - Calender 140 cm - Thickness gauge SBI TMD-EC/140.20.200.R - Post-cooling rollers (4 pcs.) - Winder (film buffer during roll change) - Cutting machine & film haul-off - Film winding unit (3 pcs.) - Mill MAZZA CBS 25 40 2T18 // Year: 2003 Complete available infrastructure: control cabinets, pumps etc.

Leto izdelave: 2025, stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Nous proposons une extrudeuse monovis neuve en stock. L'installation n'a servi qu'à des fins de test et se trouve donc dans un état excellent, proche du neuf. Idéale pour les laboratoires, le développement de matériaux, les petites séries ou les applications d'extrusion sur mesure. --- Caractéristiques techniques & équipements • Diamètre de la vis : 30 mm • Rapport L/D : 25:1 • État : neuve / uniquement essais • Entraînement : moteur SEW 4 kW avec réducteur • Zones de chauffe : 4 zones avec régulateurs de température • Armoire électrique : comprise dans la livraison • Filière : filière à brins modifiable ou réalisable sur demande • Conception : construction robuste pour laboratoire / installation pilote • Mobilité : châssis roulant avec roulettes renforcées – facile à déplacer --- Points forts • Conception très compacte • Idéale pour filaments, profils, essais en laboratoire et tests de matériaux • Fût et vis en excellent état (voir photos) Iiodpexxim Iefx Abxoc • Disponible immédiatement en stock

Leto izdelave: 1980, obratovalne ure: 36.000 h, stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 11360, Iščete zanesljivo in stroškovno učinkovito rešitev? Ta rabljeni ekstruder ponuja odlično zmogljivost po bistveno nižji ceni kot nov model. Stroj je dobro vzdrževan in popolnoma funkcionalen, idealen za obdelavo PVC-ja. Popolna izbira za proizvajalce, ki želijo povečati proizvodnjo brez visokih stroškov. Za več informacij nas kontaktirajte! Iiedpfxovuquve Abxsc

Stanje: kot nova (razstavni stroj), Leto izdelave: 2023, obratovalne ure: 200 h, The system is located at the BIBUS Austria Demo Center and can be inspected and tested at any time. In total, the device can process 14 materials – in addition to common plastics such as ABS, PLA, TPU, and Carbon PA, it also supports high-performance polymers such as Ultem, Peek, CarbonPeek, and Helios-Peek. The Hyperspeed upgrade can be performed at any time and increases the system’s productivity in dual mode by 65%. The cost for this is €35,000, including hardware, software, and service. Four material dryers are included in the scope of delivery. Payment terms: advance payment, exclusive of transport and commissioning – these costs are location-dependent and will be invoiced based on the delivery address. Iijdpsibikwjfx Abxsc

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2013, PUHALNI EKSTRUDER HDPE Model EuroTruder 75 Proizvodnja: Euro-Stel, Belgija Letnik: 2013 Ekstruder: premer 75x28 D – z nastavkom za vrat in zalogovnikom za granulacijo Iiedpfewivdkox Abxsc Model ni priložen ODLIČNO STANJE

Stanje: dober (rabljeno), Leto izdelave: 2006, številka stroja/vozila: Serien Nr. 64019447, Used Coperion Werner & Pfleiderer ZSK 34 Mvc twin-screw extruder for sale. Iiedpfxjvcyk Ne Abxoc The extruder was used in the production of powder coatings.

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, vrsta goriva: dizel, konfiguracija osi: 8x2, največja dovoljena obremenitev: 26.000 kg, gorivo: dizel, emisijski razred: Euro 5, Leto izdelave: 2010, številka stroja/vozila: YV2VH80D9AB566699, dovoljena osna obremenitev (os 1): 8.000 kg, dovoljena osna obremenitev (os 2): 9.500 kg, dovoljena osna obremenitev (os 3): 9.500 kg, Ta pripravljena kombinacija je opremljena s posipalcem mokre soli Schmidt Stratos B90-42 PCLN 700 (kapaciteta 9 m3) in snežnim plugom Schmidt SNK34 z delovno širino 300 cm. Nizka kilometraža! Vozilo se nahaja v kraju Bogdaniec, Poljska. Iiedpfxsx Nn I Ie Abxsc