Stroj za ofsetno tiskanje

MAN Miller TP104/5c+LC

Leto izdelave: 1988, Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 0591 009 03, For sale is a Bobst SP 102-CER in good condition. The machine has no defects or pending maintenance. The electronics have not been modified or refitted; everything remains original. Complete documentation is available. We have both digital and analog circuit diagrams as well as exploded views. All frames and pins required for using all machine functions are included, specifically for the blanking section, nick breaker, and lower blanking station with pins. A quick-lock system is installed, for example, so the blanking unit does not require additional fastening. Additional photos or videos can be provided upon request. Gijdjwk I Iqjpfx Afqel Bobst SP 102 CER Year of manufacture: 1988 Max. format: 1020 x 720 mm Min. format: 400 x 350 mm Max. speed: 8,000 sheets/h Max. cutting force: 250 t Minimum paper weight: 80 g/m² Maximum carton thickness: 2,000 g/m² Non-stop feeder Non-stop delivery Side lay Quick-lock system We can assist with dismantling, installation, and transport. Special feature: The machine has been raised by approximately 100 mm, eliminating the need for a pit at the production site! The height extension can be removed without tools and is not permanently fixed to the machine. Please feel free to contact us with any further questions. Best regards

Stanje: rabljeno, številka stroja/vozila: 932639 A690,

Stanje: pripravljen za uporabo (rabljen), Forklift truck Manufacturer: Jumbo Model: J60 DC12 Diesel Year of manufacture: 1994 Load capacity: 6,000 kg Own weight: 9,260 kg Lifting height: 4,300 mm Approx. 25,000 operating hours Sale due to changeover to wheel loader Gjdpfjvtwuajx Afqeil All service and lubrication intervals have been fully documented and carried out in accordance with the inspection log! All filters (hydraulic, fuel, torque converter, air) have been replaced annually. Engine oil and oil filter changed every 250 operating hours. Only B0 diesel fuel has been used (no B7). Immediately available - fully operational Location: Austria, near St. Pölten

Stanje: zelo dobro (rabljeno), Leto izdelave: 2018, Converting Line GM 330 FB-D (Hot Stamp + Screen Print) Year of manufacture: 2018 Manufacturer: Grafisk Maskinfabrik Max. web width: 350 mm Min. web width: 50 mm Unwind diameter max.: 700 mm Rewind diameter max.: 600 mm - Vetaphone Corona treatment - BST web guiding system Hot Foil Stamping Unit (Flatbed) - Speed: up to 6,000 impressions/hour or 10–15 m/min - Web width: 110–330 mm - Dual foil unwind and rewind, Ø 250 mm - Substrates: 50–500 µm - Plate thickness: 5–10 mm (standard: 7 mm) - Plate pressure: 30 tons - Foil feeding both transverse and longitudinal (rotatable turret) - Temperature range: 80°–130° C - Heating-up time: approx. 20 min Godpfxjw I T Uco Afqsil Screen Printing Unit - Speed: up to 4,000 prints/hour or 5–15 m/min - Web width: 110–330 mm - Frame size: 660 x 500 mm - Frame type: 30 x 30 mm aluminium frame - Print area: 330 mm (length) x 330 mm (width)

Stanje: rabljeno, Leto izdelave: 1997, Funkcionalnost: omejena funkcionalnost, največja širina izdelka: 510 mm, delovna širina: 505 mm,

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2001, obratovalne ure: 4.580 h, Load capacity at 500 mm load center: 2 t 2-stage mast Lifting height: 2900 mm Gedjv Uzcdopfx Afqoil Fork length: 1600 mm Fork width manually adjustable: 850 mm 4 wheels, superelastic tires Own weight: 3.25 t Overall dimensions without forks: 2350 x 1070 x 2070 mm

Stanje: rabljeno, Leto izdelave: 2004, Funkcionalnost: popolnoma funkcionalen, Heidelberg Dymatrix 113 CSB Pro – FULLY REFURBISHED Machine type: Embossing and Die-Cutting System / Automatic Platen Die Cutter Machine number: 400018 Year of manufacture: 2004 Machine Data Max. cycles per hour: 9,000 sheets/h Length without feeder: approx. 5,190 mm Length with feeder: approx. 7,770 mm Max. width: approx. 2,400 mm Max. height: approx. 3,200 mm Max. height with window open: approx. 3,930 mm Weight without feeder: approx. 30,400 kg Feeder weight W4: approx. 3,000 kg Internal chase frame size: 820 x 1,134 mm Max. die-cut form size: 816 x 1,130 mm Largest cutting area: 800 x 1,120 mm with gripper margin Adjustable gripper margin: Standard 11–17 mm (13 mm wood before 1st knife), Optional 8–14 mm (10 mm wood before 1st knife) Cutting rule height: 23.8 mm Max. feeder pile height incl. pallet: 2,000 mm Max. delivery pile height incl. pallet: 1,700 mm Feeder pile weight: max. 1,000 kg Delivery pile weight: max. 1,000 kg Feeder rest pile height: max. 450 mm Feeder rest pile weight: max. 450 kg Auxiliary delivery pile height: max. 200 mm Auxiliary delivery pile weight: 200 kg Pallet sizes Feeder: max. 800 x 1,200 mm (EURO pallet) Delivery: max. 800 x 1,200 mm (EURO pallet) Max. pallet height: 170 mm Drive and Power Supply Gedpfx Ajv T T N Hjfqsil The machine is powered by a frequency-controlled motor via a flywheel. Between the flywheel and the machine, there is a pneumatic clutch with a spring-loaded brake, allowing the machine to be engaged and disengaged. The motor remains constantly powered. The control cabinet, positioned at the machine, contains (with few exceptions) all switching devices for the die-cutter and feeder. Command and indicator devices are located on the machine and are distributed as necessary across the control panels. Control Cabinet Equipment: Power supply, main switch, fuses, motor protection, PLC control Connections: 3-phase AC 400 V, 50 Hz, 63 A Control voltage: 24 V DC; 230 V; 50 Hz Dimensions: 2,800 x 600 x 2,200 mm The machine is in very good condition. A test run is possible at any time. Various accessories included. Patented QTM chain guide rails have already been retrofitted. Price: Negotiable

Stanje: zelo dobro (rabljeno), Leto izdelave: 2000, številka stroja/vozila: 403, Equipment / Further Specifications: Unwinding Unit: Roll Holder: single Max. Roll Diameter: 1000 mm Gedsn D Ew Iopfx Afqeil Unwinding: automatic Thermoforming Machine: Max. Tool Size: 520 x 330 mm Max. Positive Forming Height: 15 mm Max. Negative Forming Height: 120 mm Film Width: 150 / 760 mm Stroke Length: 50 / 330 mm Max. HIPS Film Thickness: 1.8 mm Lower Table Stroke: 150 mm Clamping Force: 7,500 kg Installed Top Heater Power: 18.8 kW Installed Bottom Heater Power: 14.1 kW Idle Cycle Rate: 40 per min Main Drive Motor Output: 2.2 kW Film Feed Motor Power: 0.75 kW Operating Air Pressure: 7 kg/cm² Water Consumption at 12°C: ~30 l/h per 1 t Air Consumption at 7 kg/cm²: ~125 l/cycle per 1 t Installed Power: 50 kW 9x Tools: Article No. // Tool No. // Cavities // Description / Product: 3599 // 457 // 10 // Vending Cup; Capacity: 223 ml 593 // 460 // 8 // Coffee-to-go / Thermo Cup; Capacity: 300 ml / 12 oz 509 // 452 // 6 // Ice Cream Cup; Brimful: 140 ml / Usable Volume with 6 mm headspace: 120 ml 591 // 459 // 10 // Thermo Cup ⌀ 81/180 ml 740 // - // - // Standard Cup with Sealing Rim ⌀ 75-120 ml 3589 // 458 // 12 // Coffee-to-go / Thermo Cup; Capacity: 80 ml 595 // 456 // 10 // Vending Cup; Capacity: 150 ml 210 // - // - // Baking Tray / Technical Part / Plate or Tray 8000 // 455 // - // Granulate Cup 180 ml / Technical Part with Flat Sealing Rim

Stanje: zelo dobro (rabljeno), Desktop Metal 3D Printer Complete System We are offering you a complete Desktop Metal 3D printer system. Desktop Metal Studio System 3D Metal Printer Complete system: 3D printer + debinding machine + sintering furnace Desktop Metal The three-part solution includes 3D printer, debinder, and furnace Manufacturer: Desktop Metal Model: Desktop Metal Studio System Operating condition: Used (Good) Year of manufacture: 2019 Desktop Metal Studio System Includes: 1.1 Desktop Metal Studio 3D Printer Bound Metal Deposition (BMD) Technology Features: Printed materials: Metal Technology: FDM Application: Industrial Other features: Office-friendly X-axis travel: 30 cm (12 in) Y-axis travel: 20 cm (8 in) Z-axis travel: 20 cm (8 in) Description: Unlike laser-based systems that selectively melt metal powder, the printer extrudes bound metal rods—similar to an FDM printer. This eliminates the safety requirements often associated with 3D metal printing and enables new features such as the use of closed-cell infill for lightweight strength. 1.2 Desktop Metal Studio Debinder (debinding machine) Fully automatic debinding Cleaning tank: 17.4 L (in-process) / 22.5 L (storage) Description: The debinder prepares green parts by dissolving the primary binder for sintering. With a low-emission design, it does not require external ventilation and is safe for office environments. Automatic liquid distillation and recycling mean there is no need to refill between cycles. 1.3 Desktop Metal Studio Sintering Furnace Hybrid technology (microwave & conventional heating elements) Build volume: 305 x 205 x 205 mm Carbon housing Gas supply: 2 x 900 L gas cylinders Heating capacity: 20 kW Features: Function: Sintering Configuration: Chamber Gijdpok Hz Nqofx Afqol Heat source: Gas Other features: High temperature, automatic Maximum temperature: 1,400 °C (2,552 °F) Description: Fully automated and sized to fit through a standard office door, the furnace offers industrial-grade sintering in an office-friendly package. Built-in temperature profiles, tailored to each design and material, ensure even heating and cooling without the residual stresses typical of laser-based systems. Condition: used Scope of delivery: (see picture) (Technical data and information are subject to change and errors!) For further questions, we are happy to assist you by phone.

Stanje: rabljeno, Leto izdelave: 2003, Fleksotiskarski stroj za tisk etiket GALLUS EM 280 • Odvijalnik Gedpfx Afexr Dideqoil • EL vodilo traku • Koronska obdelava • Kontaktno čistilo traku • Delam-relam enota • Obratna letev (turnbar) • 8 fleksotiskarskih enot • 8 UV sušilnikov • Enota za hladno folijo • 2 izsekovalni enoti • Navijalnik odpadne matrice • Enota za rezanje na pole • Sistem kamerškega nadzora