Stroj za čiščenje delov, pralni stroj

Malmkvist Turbex 2000

Leto izdelave: 2026, stanje: kot nova (razstavni stroj), Parts Cleaning Machine / Spray Cleaning System Type TR450 The spray-rotation cleaning system type TR450 is an automated cleaning and degreasing unit featuring a lid that opens easily upwards. The system is designed for cleaning single parts and/or bulk materials in baskets sized LxWxH 520x320x200h mm. During the cleaning process, the basket must be closed with a lid. The cleaning result depends on a slight tumbling motion of the parts within the basket when cleaning bulk material; the fill level in the basket must be observed accordingly. Additionally, the unit is equipped with a flood tray beneath the goods basket, allowing for immersion rinsing of the parts, thereby achieving an even better cleaning result. Including the following features: • Fully made of stainless steel 1.4301, inside and outside • Level monitoring and automatic fresh water refill • Full system insulation • Hot air drying (power: 11.6 kW) • Steam vapor extraction Gsdpfx Acofbt Sio Hskb • Oil skimmer for bath maintenance • Automatic fresh water refill • 1 small parts basket, 520x320x200h mm, mesh size: 6x6 mm, with height-adjustable locking lid Connected load: approx. 20 kW (32 amp plug)

Leto izdelave: 2005, stanje: pripravljen za uporabo (rabljen), Tank capacity: 775 l, maximum batch weight: 100 kg, heating power: 26 kW, maximum temperature: 75°C, basket dimensions (X/Y/Z): 660 mm / 480 mm / 338 mm, fine filtration tank 1/2: 100 µm / 50 µm. Machine dimensions (X/Y/Z): approx. 1850 mm / 1400 mm / 1800 mm, weight: approx. 950 kg. The machine was overhauled in 2024 and has not been used since. Includes basket rotation with swing drive, automatic water filling, and oil separation with coalescence separator unit and oil collection container. Documentation available. On-site inspection possible. Gkodpjwr Dxhefx Ac Hsb

Stanje: rabljeno, Leto izdelave: 2021, Funkcionalnost: popolnoma funkcionalen, skupna višina: 2.900 mm, skupna širina: 1.350 mm, skupna dolžina: 1.710 mm, vrtljajska hitrost (min.): 1.000 obr/min, moč: 5,5 kW (7,48 KM), SPYRA centrifuga za ostružke 600H - Za odstranjevanje olja iz mokrih ostružkov z oljem ali emulzijo - Popolnoma delujoča - Po želji z garancijo! - Motilni deli v ostružkih pri tem stroju niso težava, saj je bil posebej tako zasnovan in patentiran. Zmogljivost obdelave lomljenih ostružkov: - Jeklo: 4 t/uro - Aluminij: 0,8 t/uro - Medenina: 2,7 t/uro - Siva litina: 2,7 t/uro Gedpfjw Nqu Asx Ac Hekb Stroj si je mogoče ogledati v 71384 Weinstadt blizu Stuttgarta.

Leto izdelave: 1998, stanje: zelo dobro (rabljeno), 1 x Centrifuge Aryma / Rimann Gksdjigni Ijpfx Ac Hob 2.5 LIT Year of manufacture: 1998 with open basket In excellent visual and technical condition Technical data: Max. load: 3 kg / 2.5 l The machine can be inspected under power at any time.

Stanje: zelo dobro (rabljeno), Leto izdelave: 1999, O F F E R We can offer you, subject to prior sale and errors excepted, ex stock, without obligation: EISELE Circular Saw Machine for Straight and Mitre Cuts Gsdpfx Aex A H Rroc Hjkb Model: VMS 370 Year of manufacture: 2000 _____ Maximum saw blade diameter: 370 mm Cutting capacity: Tubes approx.: Ø 130 mm Flat material: 200 x 100 / 140 x 100 mm Solid material, square: 120 mm Mitre cuts may achieve slightly reduced cutting dimensions, up to a maximum of 140 mm. Manual vertical saw carriage stroke: approx. 200 mm Saw blade speeds: 17–34 rpm Saw blade drive approx.: 2 / 2.6 kW Total drive power: approx. 3 kW — 380 V — 50 Hz Weight: approx. 500 kg Accessories/Special equipment: • Saw head adjustable for mitre cuts at 30° / 45° / 90°, scale indicated • Pole-changing three-phase motor with max. 2.6 kW power • Manual carriage feed with long, adjustable lever • Manual workpiece vice, jaw width approx. 120 mm • Integrated coolant system with chip collection tray • Roller table material feed, approx. 2,000 mm • New saw blade installed, 2 spare saw blades included • Electrical system recently renewed Ideal machine for metal fabrication and locksmith workshops. Condition: very good – demonstration ready – very smooth running Delivery: ex stock – as inspected Payment: strictly net – upon receipt of invoice We look forward to receiving your order. We also have further, larger EISELE cold circular saws and other (band/hacksaw/cold circular) saws in stock. Further sawing machines available at all times – please enquire.

Stanje: rabljeno, Leto izdelave: 2020, skupna višina: 2.600 mm, skupna širina: 1.250 mm, skupna dolžina: 1.610 mm, vrtljajska hitrost (min.): 1.200 obr/min, moč: 4 kW (5,44 KM), SPYRA chip centrifuge 500H - For de-oiling wet chips containing oil or emulsion - Fully operational and ready for use - Optional: supplied with warranty! - Contaminants and interference parts in the chips are not a problem for this machine, as it has been specially designed and patented for this purpose. Throughput for broken chips: - Steel: 2 t/h - Aluminium: 0.5 t/h Gkodpfxsw Nq Ams Ac Hjb - Brass: 2.2 t/h - Grey cast iron: 2.2 t/h The machine can be inspected in 71384 Weinstadt near Stuttgart.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2010, Funkcionalnost: popolnoma funkcionalen, premer žaginega lista: 120 mm, P O N U D B A Iz zaloge vam lahko, z možnostjo napake in vmesne prodaje, nezavezujoče ponudimo: EISELE Vertikalna krožna žaga za hladno rezanje z možnostjo poševnega reza Tip VMS II – 350 PV Letnik 2010 _____ Max. premer žaginega lista 350 mm Hitrosti žaginega lista 40/80 obr/min Premer obdelovanca 90 mm Območje zamika žagalnega vozička 0 – 90 stopinj Neprekinjeno nastavljiv podajalni pomik pnevmatsko 0 – 10 (?) Teža cca 350 kg Oprema: • Nastavljiv desni omejevalnik dolžine obdelovanca, nastavljiva maks. dolžina do 500 mm • Pnevmatska primes za obdelovanec – vpenjalna širina 160 mm • Sistem za mazanje MMKS za žagin list Gkjdpfxsyub N Ue Ac Heb • Nastavljiv omejevalnik globine

Stanje: rabljeno, Leto izdelave: 1980, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: D08L/8081, Številka ponudbe: D08L/8081 Vrsta stroja: Stroj za ravnanje in rezanje žice Proizvajalec: WMW Tip: UDARA10 Leto izdelave: 1980 Razpon premera: 3–10 mm Dolžine odrezkov: 2000 mm Gedpfxowi Svco Ac Hjkb Hitrost – metri/min: 22–71 Lokacija: Pri nas na zalogi

Stanje: dober (rabljeno), Leto izdelave: 2000, High-performance universal metal circular saw automatic machine Circular saw - automatic Eisele PSU 450 CNC 2 Gkodpjvxkc Ijfx Ac Hjb Saw blade diameter: 450 mm Cutting diameter: 150 mm Mitre cuts – all positions +/-45° Saw motor: 3.6 kW

Stanje: dober (rabljeno), Leto izdelave: 2002, Behringer Eisele VA-0-250-NC krožna žaga TEHNIČNI PODATKI Območje rezanja: 90° Premer žaginega lista: 25 cm Premer osi: 40 mm Območje reza: 10–75 mm Dolžina reza: 5–900 mm Število vrtljajev: 2800 vrt/min Hitrosti rezanja: 26/52/103/206 SFPM ali 0,13/0,26/0,52/1,05 m/s Hitrosti podajanja: 0–40 mm/s NC-os: Da Gsdpsvdk A Eofx Ac Hskb Dimenzije: 190 x 127 x 190 Teža: 1300 kg Ne prevzemamo odgovornosti za pravilnost, popolnost in aktualnost navedenih podatkov.