Stroj za erodiranje žice

MAKINO SP 43

Stanje: dober (rabljeno), Shrink tunnel from a German manufacturer: Bcodpsh U A I Rjfx Ag Tsw - Tunnel opening approximately 500 x 200 mm. - Adjustable temperature up to 250°C and conveyor speed up to 25 m/min. - Option for fixed or rotating central tunnel rods. - Hot air flows at the top and in the middle can be adjusted separately via deflection plates. - Bottom air flow can be switched on separately. - The machine can be moved or locked into position using lockable castors.

Leto izdelave: 2018, Stanje: zelo dobro (rabljeno), consisting of two toothed belt axes EGC-80-1300-BS-10P-KF-0H-ML-GK and four linear guide rails HGR 20C 1705V9-10A00 with HIWIN linear blocks HGW CCC 170 3W3-10200 Two Unimotors 075E3C300BACAA075140 with two EMERSON UNIDRIVE M 701-3200050A Bcjdpfx Aeg Ixumjg Tjw

Stanje: zelo dobro (rabljeno), Leto izdelave: 2023, obratovalne ure: 106 h, dvižna višina: 5.000 mm, vrsta goriva: dizel, tip droga: triplex, moč: 185 kW (251,53 KM), vrsta prenosa: samodejen, dolžina vilic: 3.000 mm, barva: rdeča, Transmission: Hydrodynamic powershift, 3 gears, automatic Year of manufacture: 2023 Unladen weight: 46,760 kg Lifting capacity: 33,000 kg Height: 370 cm CE marking: yes Technical condition: very good Visual condition: very good KALMAR DCG 330-12 FORKLIFT TRUCK TRIPLEX FULL FREE LIFT FORK SHAFT SYSTEM 33,000KG AT 120CM LOAD CENTER SHORT WHEELBASE = 475CM FORK LENGTH = 300CM, WIDTH = 30CM, THICKNESS = 11CM FRONT AND REAR VIEW CAMERAS TIRE PRESSURE CONTROL SYSTEM CENTRAL LUBRICATION LED PACKAGE CHASSIS / BODY: - Towing pin - Steps with anti-slip protection Bedpfx Aev Hn D Eog Tscw - Rearview mirrors mounted left and right on the front fenders - Robust and protective fenders CABIN: - EGO cabin - Clear, toughened safety glass windows, thickness 6 mm - Clear windows including sliding windows in left and right doors - Full-size doors with locks on both sides - Complete operation system on right console including light controls, rotary control for display, levers for load handling system (electric adjustable, 2-way) - Multifunction lever left, including horn and indicators - Brake pedal system left and right - Interior comfort: mirrors, handles, interior lighting, etc. - Front/rear and roof window wipers and washers - Hydraulic steering, steering wheel adjustable electrically in height, manually in reach and rake, with steering knob - External reversing lights - Tilting cab - Foot grip, left - Automatic heating and ventilation (ECH) with fresh air filter - Cruise control pedal right - Kalmar standard key system - Cup holder - Coat hook - Color display: fuel level, indicator, engine and transmission temperature, engine oil pressure, battery voltage, clock and date, operating hours counter, service time indicator, speed, engine RPM, pop-up information, AdBlue display STEERING SYSTEM: - Kalmar steering axle including double-acting steering cylinder DRIVELINE: - Axletech drive axle HYDRAULICS: - Electric servo - Sight glass on hydraulic oil tank - Variable displacement pumps - High-pressure filter - Automatic engine speed increase when using load handling function - Standard tilt angles 5F/10B ELECTRICAL SYSTEM: - 24V electrical system - Rear lights and brake lights, LED - Work lights on the front fenders, LED - 2 x mast work lights - Indicators including hazard flashers, LED - Master switch TIRES: - Michelin 16.00x25

Leto izdelave: 2022, obratovalne ure: 0 h, Stanje: novo, Mobile cleaning centrifuge including buffer tank for waste water, agitator, and double-diaphragm air-operated pump. - New machine - Numerous other variants and special configurations available upon request Machine type: Process water centrifuge solid-liquid separation Manufacturer: Eurotec Innovation GmbH Model: ZS21-M EUR Application: Mass finishing technology, general solid-liquid separation, cooling lubricant treatment, wet blasting systems, ... Advantages: - High discharge performance thanks to acceleration forces of more than 1,800 times gravity acting within the system - Process water is recirculated, minimizing operating costs and protecting the environment - Savings on costly additives for the mass finishing process (compound) - Economical and efficient separation of solid particles from a mixture - Suitable for process liquids up to 70°C (optional cooling available) - Frequency-controlled motor drive for smooth acceleration and deceleration of the rotor Are you looking for innovative solutions for surface treatment and process water treatment? We offer a wide range of systems in the fields of mass finishing, drying, and process water technology, custom-tailored to your application. From development through to production: We supply all our products from a single source, and everything is "Made in Germany." ----- Simply contact us — we will be happy to advise you without obligation. ----- Bsdpfef Sqfqox Ag Tocw The European Commission provides a platform for out-of-court online dispute resolution (ODR platform). This listing serves exclusively as an online presentation of our goods. Contract negotiations are conducted via telecommunications (email, fax, telephone, messaging portal). We will first provide you with a non-binding offer, which will also inform you about our general terms and conditions, cancellation rights, and legal notice before any purchase/contract is concluded.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2019, Os X 5.000 mm Os Y 3.000 mm Os Z 1.500 mm Velikost mize 5.000 x 2.500 mm Vpenjalo orodja HSK 63 Menjalec orodja 60 pozicij Krmiljenje HEIDENHAIN TNC 640 Vključno z notranjim hlajenjem (IKZ) 40 bar Vključno s simultano vilicasto glavo Vključno s popolno dokumentacijo Bjdpjx E S E Nefx Ag Tocw

Stanje: rabljeno, Leto izdelave: 2016, Operating hours machine: 5,320 h Max. feed width: 300 mm Processable sheet thickness: 1-15 mm Voltage: 400V / 50 Hz Rated current: 13.5 A Rated power: 7.5 kW Protection class: IP42 Infinitely variable feed rate: 0-2 m/min Length: 2,600 mm Width: 2,300 mm Height: 1,300 mm Machine weight: 1,900 kg Standard equipment - With vacuum table for processing steel, stainless steel, and aluminium for part sizes from 45 x 45 x 1 mm up to a maximum of 200 x 200 x 15 mm (geometry-dependent) - Time-consuming turning and reworking of parts is eliminated - Thanks to the innovative swivelling station, parts with an edge length of more than 200 mm can also be processed on one side by folding away the station - High degree of automation enables economical and process-safe processing of large quantities of parts Bjdpjv N I Hljfx Ag Tecw - High and consistent processing quality - Dry processing (no chemical additives required, as is the case with vibratory finishing) - Small parts are discharged on the loading side and collected in a catch box - No additional walking routes for the operator - Energy efficient - The processing principle ensures uniform tool wear across the entire working width - Fast and simple tool change - Simple and intuitive machine operation - Modern, compact machine design Additional equipment Lissmac DDE 1500 extraction unit

Stanje: zelo dobro (rabljeno), Leto izdelave: 1998, Funkcionalnost: popolnoma funkcionalen, merilno območje os X: 500 mm, merilno območje osi Y: 700 mm, merilno območje os Z: 400 mm, Oprema: Na voljo je tipska ploščica, Mitutoyo EURO M 574 merilni stroj za koordinatno merjenje v zelo dobrem stanju na prodaj. Brez računalnika in programske opreme. Leto izdelave: 1999 Bcjdpfsu E Uzxsx Ag Tjw Brez PC-ja!!! X-os: 500 mm Y-os: 700 mm Z-os: 400 mm Ločljivost: 0,0005 mm Material merilne mize: granit Tipalo: Renishaw MH 20i Velikost granitnega ležišča: 850 mm x 1160 mm Standard dolžine: visokonatančni linearni dajalnik Centrirni mikroskop: Mitutoyo CF-10 Fiksacija in fino nastavljanje: Enostavna zračna klema za vsako os, brezstopenjsko fino nastavljanje po celotnem hodu vsake osi. Uporabna površina: 680 x 1160 Vpenjanje obdelovanca: navojni vložek M8 x 1,25 Obdelovanec: Razdalja med stebri: 720 mm Maksimalna višina: 480 mm Največja masa: 160 kg Brez PC-ja Merilna negotovost dolžine po ISO 10360 E = [3,5 + 4,0L/1000] µm pri temperaturi 18 do 22 °C Teža stroja: 450/540 kg

Stanje: rabljeno, Leto izdelave: 2013, Technical Details: Turning diameter: 38 mm Item: CNC Turning Machine Make: Hanwha Model: STL38H Year of manufacture: 2013 Control: Siemens 840SL for 8 axes Bcedetv Sdfopfx Ag Tow Main spindle: Max. turning diameter: 38 mm; spindle bore max. 42 mm; max. speed: 6,500 rpm Max. power: 23 kW; C-axis with 0.001° increments; Z1 travel: 320 mm; synchronous running guide bush unit; guide bush type: JBS or SL38; collet type: 173E / F48 Sub spindle: Max. pick-off diameter: 38 mm; max. speed: 6,500 rpm Max. power: 23 kW; C-axis with 0.001° increments; Z2 travel: 320 mm; collet type: 171E / F42 Turret: Max. speed: 6,000 rpm Max. power: 2.6 kW; servo axes: X2, Y2, Z2; stroke [mm]: X2 = 115, Y2 = 100, Z2 = 120 Bar feeder: FMB Turbo 5-55 High-pressure unit: SFB-301 eco 150 bar Please contact us for further information and pictures via email (at) or *

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, 2x125 tonski portalni žerjav, dvigalna višina 30 metrov, letnik 2013. Bodpfsgmdnfox Ag Tscw

Stanje: rabljeno, Leto izdelave: 2015, številka stroja/vozila: A2536805, Pressure: 40 t Stroke: 250 mm Return force: 6.3 t Motor: 5.5 kW Max. working height: 450 mm Max. rapid approach speed: 90 mm/sec Pressing speed: 10 mm/sec Travel distance - w: 250 mm Ram plate: 500 x 200 mm Table plate: 600 x 650 mm with T-slots Table cut-out: 200 x 170 mm Table height: 850 mm Oil tank: 200 l The described machine can be custom-built for you. Production lead time is approx. 5 months after receipt of payment. Rapid approach: The press moves at up to 90 mm/sec to the zero point. Positioning accuracy is 0.5 mm or better. Return: The press returns to the end point at up to 90 mm/sec. Accuracy is 0.5 mm or better. The dwell time can be adjusted from 0 to 10 seconds (in 0.1 sec increments). Pressing force is adjustable in bars, corresponding to 10 to 40 tons. Bcsdpfx Agsfxyhfe Tew Further details on the control system: Operation can be locked via a key switch. The control key switch provides the following functions: - Manual operation via two-hand control at 9.5 mm/sec in setup mode. (Stop at any desired position by releasing the switches.) - Manual operation for bending at up to 9.5 mm/sec via two-hand control, with automatic return to TDC upon releasing both buttons. - Automatic operation with safe tools at up to 200 mm/sec. This function is labeled with a warning on the control panel. In automatic mode, the machine is strictly intended for use with enclosed, safe tools only. This warning is clearly displayed on the front of the machine. In manual setup mode, the machine can also be operated via two-hand control at a maximum of 9.5 mm/sec. Bending operations can also be performed in setup mode. The key-operated selector switch allows switching between automatic and manual operation. Position adjustment for TDC and BDC, and the shift point for speed reduction, are managed by sensors adjustable on a chrome-plated rod. The sensor can be finely adjusted with a locking thread – accuracy +/- 0.5 mm. The press can be equipped with a bending blade and operated via two-hand control for sheet metal bending. In automatic mode with safe tools, it can punch, notch, and bend.