Vgrajena Visokotlačna Naprava 150-300 Bar, 30-60 L nakup rabljenega (100.680)

Stanje: kot nova (razstavni stroj), Leto izdelave: 2026, High-pressure cleaning unit, high-pressure jetting unit, high-pressure built-in jetter mounted on a hot-dip galvanized and painted high-quality steel frame with forklift pockets, suitable for installation in service vehicles. Similar to PTC Salmon, but not Feierabend & Fock, Karo, Leistikow, Müller, Rioned, Rockstroh, Rom, Rowo,... The following models are available: Salmon 60/150 | 60 l/min at 150 bar | Engine: Kohler 19 kW Salmon 45/200 | 45 l/min at 200 bar | Engine: Kohler 19 kW Salmon 35/250 | 35 l/min at 250 bar | Engine: Kohler 19 kW Salmon 30/300 | 30 l/min at 300 bar | Engine: Kohler 19 kW DIMENSIONS / WEIGHT: Dimensions without water tank LxWxH: approx. 760 x 1,250 x 1,200 mm Dimensions with 400l water tank LxWxH: approx. 1,220 x 1,250 x 1,200 mm Dimensions with 800l water tank LxWxH: approx. 1,670 x 1,250 x 1,200 mm Unladen weight without water tank: approx. 370 kg Pgsdpfx Ameiky H Sjfjr Unladen weight with 400l water tank: approx. 400 kg Unladen weight with 800l water tank: approx. 430 kg HIGH-PRESSURE PUMP: - Manufacturer: HPP - Model: CLW - Flow rate: 30 - 60 l/min - Operating pressure: 150 - 300 bar ENGINE: - Manufacturer: Kohler - Model: KDW 1003 - Fuel: Diesel - Max output: 26 HP (19 kW) CONTROL PANEL: - Start button - Operating hours counter - Electronic fuel gauge - LED indicators for oil temperature, low oil pressure, clogged air filter, RPM measurement, generator, and glow plugs - Emergency stop button ELECTRIC OPERATION: - Hydraulic hose reel wind/unwind; - Bypass on/off; - Engine speed control +/-; - Emergency stop button; - Switching to radio remote control; INSTALLED ALARM: - Low-water protection to prevent the high-pressure pump from running dry, with automatic shut-off. SAFETY AND PRESSURE CONTROL VALVES: - The unit is equipped with a safety valve, pressure control valve, and a pressure gauge. HIGH-PRESSURE HOSE REEL: - Type: Electric hose reel - Material: Stainless steel - Capacity: max. 80 m ½” and 80 m 3/8" high-pressure hose - Hose: 80 m ½” high-pressure hose (included) - Hose guide: manual LOW-PRESSURE WATER SUPPLY HOSE REEL: - Type: Manual hose reel - Material: Stainless steel - Capacity: max. 35 m ¾” low-pressure hose - Hose: 35 m ¾” low-pressure hose (included) WATER FILTER: - With washable cartridge and drain valve. - Filtration grade: 50 mesh SCOPE OF DELIVERY: - IMET multifunction radio remote control; - Engine ON/OFF; - Bypass ON/OFF; - Engine speed control +/-; - Hydraulic hose reel wind/unwind; - Emergency stop button; - Battery charger for remote control; - 400 or 800 l (with steel frame) polyethylene water tank; OPTIONS ON REQUEST: - Pulsation/booster pump; - 50 or 60 m ½” high-pressure hose; - 50, 60, or 80 m 3/8” high-pressure hose with G3/4” connection; ACCESSORIES ON REQUEST: - STORZ kit for connection to hydrants; - UNI 45 kit; - Version with 2 high-pressure hose reels; - Mobile hot water generator 10 kW – 12 VDC; - High-pressure spray gun kit, swivel joint, and quick coupling; - High-pressure lance kit with flat jet nozzle 15° / rotating nozzle; - Lance kit for increased flow; - Rotating nozzle kit; - Double-head nozzle kit; - Water sandblasting lance kit; - Detergent dispenser kit; - Step cleaning device; - Surface cleaner; - Sludge suction device (Venturi); - Pipe cleaning nozzles; Further accessories on request.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, High-pressure cleaning unit, high-pressure flushing device, high-pressure built-in washer mounted on a hot-dip galvanized and painted high-quality steel frame with forklift pockets, suitable for installation in commercial vehicles. PTC Moses 60/200, 75/150, 30/300, 75/210XL, 84/190XL, 102/150XL, and 50/300XL – similar to, but not manufactured by Feierabend & Fock, Karo, Leistikow, Müller, Rioned, Rockstroh, Rom, Rowo, ... The following models are available: Moses 60/200 | 60 l/min at 200 bar | Engine: Yanmar 3TNV88C 27.5 kW Stage V Moses 75/150 | 75 l/min at 150 bar | Engine: Yanmar 3TNV88C 27.5 kW Stage V Moses 30/300 | 30 l/min at 300 bar | Engine: Yanmar 3TNV88C 27.5 kW Stage V Moses XL 75/210 | 75 l/min at 210 bar | Engine: Yanmar 4TNV88C 35.5 kW Stage V Moses XL 84/190 | 80 l/min at 190 bar | Engine: Yanmar 4TNV88C 35.5 kW Stage V Moses XL 102/150 | 102 l/min at 150 bar | Engine: Yanmar 4TNV88C 35.5 kW Stage V Moses XL 50/300 | 50 l/min at 300 bar | Engine: Yanmar 4TNV88C 35.5 kW Stage V DIMENSIONS / WEIGHT: Dimensions, models with 27.5 kW without water tank (L x W x H): approx. 910 x 1,220 x 1,200 mm Dimensions, models with 35.5 kW without water tank (L x W x H): approx. 1,240 x 1,310 x 1,300 mm Empty weight without water tank: approx. 550–700 kg HIGH-PRESSURE PUMP: - Manufacturer: HPP - Model: CLW for standard and ELS for XL models - Flow rate: max. 102 l/min - Operating pressure: max. 300 bar ENGINE: - Manufacturer: Yanmar - Model: 3TNV88C and 4TNV88C - Fuel: Diesel - Cooling: Water - Cylinders: 3 and 4 - Max output: 37–48 HP (27.5–35.5 kW) - Max engine speed: 3,600 rpm TRANSMISSION: Pulley and belt CONTROL PANEL: - Start button - Operating hours counter - Electronic fuel gauge - LED oil temperature display - LED low oil pressure indicator - LED air filter clogged indicator - LED RPM indicator - LED generator indicator - LED spark plug indicator - Emergency stop button ELECTRICAL OPERATION: - Hydraulic hose reel wind/unwind - BYPASS on/off - Speed adjustment +/- - Emergency stop button - Switch to radio remote control INTEGRATED SAFETY FEATURES: - Water shortage protection with automatic shut-off to prevent dry running of the high-pressure pump SAFETY AND PRESSURE CONTROL VALVES: - The unit is equipped with a safety valve, a pressure regulating valve, and a pressure gauge HIGH-PRESSURE HOSE REEL: - Type: 180° swivel, hydraulic hose reel - Material: Stainless steel - Capacity: max. 100 m ½" - Hose: 80 m ½" high-pressure hose (included) - Hose guide: manual WATER SUPPLY HOSE REEL: - Type: manual - Material: Stainless steel - Capacity: max. 35 m ¾" low-pressure hose - Hose: 35 m ¾" low-pressure hose (included) FUEL / OIL TANK: - Fuel: approx. 13 l - Oil: approx. 13 l SCOPE OF DELIVERY: - IMET multifunctional radio remote control; - Engine on/off; - BYPASS on/off; - Speed adjustment +/-; - Hydraulic hose reel wind/unwind; - Emergency stop button; - Battery charger for remote control; - 500, 800, or 1000 l water tank; Podpef Ar Exjfx Amfsgr

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, PTC CTR-C Cold Water Trailer, similar to but not ROM, Rioned, Karo, ... - Single-axle trailer on a hot-dip galvanized frame with jockey wheel, parking brake, automatic reverse gear, support legs, tail lights and reflectors, towing eye for 50 mm coupling, 13" tires, and ABS. Pjdpfefdvkrox Amfogr The following cold water models are available: CTR-C 43/180 | 43 l/min at 180 bar | Petrol Engine: Honda GX690 17.7 kW CTR-C 55/160 | 55 l/min at 160 bar | Petrol Engine: Honda GX690 17.7 kW CTR-C 60/150 | 60 l/min at 150 bar | Diesel Engine: Kohler KDW 1003 19 kW CTR-C 20/350 | 20 l/min at 350 bar | Diesel Engine: Kohler KDW 1003 19 kW - Dimensions: 3,045 x 1,390 x 1,190 mm - Unladen weight: approx. 350 kg - High-pressure pump: Comet TW Premium with integrated gearbox - HP hose reel: manual, max. 60 m 1/2" hose (included). Model CTR-C 55/160 OPTIONAL with electric HP hose reel. - Water supply reel: manual, 35 m 3/4" hose - Water tank: 400 l - Options such as remote control, booster pump, warning light, work light, aluminium hose cover and accessories available on request

Stanje: kot nova (razstavni stroj), Leto izdelave: 2026, Visokotlačni čistilni stroj, visokotlačna izpirna naprava, visokotlačni čistilec z sesalno napravo na ognje-cinkiranem in barvanem visokokakovostnem jeklenem okviru z viličarskimi žepi. Na voljo so naslednji modeli:  Vortex Combi 400 ali 1000 Sewer Whale - 55 l/min, 160 bar visoko tlačna črpalka - 1260 l/min sesalna zmogljivost - 500 l rezervoar za čisto vodo - 400 ali 1000 l blaten rezervoar  Vortex Combi 400 ali 1000 Sewer Salmon - 60 l/min, 200 bar visoko tlačna črpalka - 3600 l/min sesalna zmogljivost Pgodpfx Amsfdkb Esfor - 500 l rezervoar za čisto vodo - 400 ali 1000 l blaten rezervoar VISOKOTLAČNI KOLUT ZA CEV:  Tip: ročni kolut za cev  Material: nerjaveče jeklo  Kapaciteta: max. 50–80 m ½'' visokotlačne cevi  Cev: 50–80 m ½'' visokotlačna cev (vključena) NIZKOTLAČNI KOLUT ZA DOVOD VODE:  Tip: ročni kolut za cev  Material: nerjaveče jeklo  Kapaciteta: max. 35 m ¾'' nizkotlačne cevi  Cev: 35 m ¾'' nizkotlačna cev (vključena) REZERVOAR ZA GORIVO:  Kapaciteta: cca. 13 l VODNI FILTER:  Z izpiralno kartušo in izpustnim ventilom  Stopnja filtracije: 50 mesh V OBDOBJEMU DOBAVE:  Večfunkcijski daljinski upravljalnik IMET; - Vklop/izklop motorja; - Vklop/izklop bypassa; - Elektronska regulacija števila obratov +/-; - Gumb za zaustavitev v sili;  Polnilec za akumulator za daljinski upravljalnik;  400 oz. 500 l rezervoar za vodo iz polietilena; DODATNA OPREMA NA ZAHTEVO:  STORZ komplet za priklop na hidrant;  UNI 45 komplet;  Mobilni grelnik vode 10 kW – 12 VDC;  Komplet visokotlačne pištole, zglob in hitra spojka;  Komplet visokotlačne palice s ploščato šobo 15° / rotacijska šoba;  Komplet palice za večji pretok;  Komplet rotacijskih šob;  Komplet šob z dvojno glavo;  Komplet peskalne palice za vodo;  Komplet dozirnika za detergent;  Naprava za čiščenje stopnic;  Naprava za čiščenje površin;  Naprava za sesanje blata (Venturi);  Šobe za čiščenje cevi;  Druga dodatna oprema na zahtevo Dodatno na voljo modeli: VORTEX COMBI 400 Whale E = popolnoma električni  Vortex Combi 800 Cleaning D hladna voda - 800 l blaten rezervoar - 2750 l/min sesalna zmogljivost - Dizelski motor: Yanmar - 15 l/min pri 150 bar - Visokotlačni kolut s 20 m cevjo - Daljinsko upravljanje na zahtevo

Stanje: zelo dobro (rabljeno), Leto izdelave: 2012, Podatki: Obdelovalni center Ibarmia (3 osi) XYZ: 3050 x 600 x 900 mm Število obratov: 12.000 min⁻¹ Psdpfjywz H Hox Amfegr Magazin: 60 mest, HSK 63 Visokotlačno: 60 bar Merjenje orodja Renishaw Merilna sonda Renishaw Sistem za hlajenje / tračni filter Transporter za ostružke

Stanje: rabljeno, Leto izdelave: 1997, Funkcionalnost: popolnoma funkcionalen, Popolnoma delujoča brusilna naprava s krtačami. Pjdpfxsznzbvs Amfegr

Stanje: novo, Prodajam profesionalni nosilec za zračno dihalno napravo Dräger PSS 7000 Pgjdpfx Amoy Ilvgofsr • Model: PSS 7000 • Manometer: do 300 bar • Part No: 3355850 • Type No: 3355068 • Tehnično stanje: dobro • Komplet pasov in zaponk • Trden okvir brez razpok Prodajam točno to, kar je na slikah. Brez jeklenke in maske. Oprema za gasilce – najvišja serija Dräger.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, High-pressure cleaning unit, high-pressure jetting device, high-pressure built-in jetter mounted on a hot-dip galvanized and painted high-quality steel frame with forklift pockets, suitable for installation in service vehicles. Similar to PTC Salmon, but not Feierabend & Fock, Karo, Leistikow, Müller, Rioned, Rockstroh, Rom, Rowo, ... The following models are available: Salmon 60/200 | 60 l/min at 200 bar | Engine: Vanguard 35 HP 26 kW Salmon 75/150 | 75 l/min at 150 bar | Engine: Vanguard 35 HP 26 kW Salmon 30/300 | 30 l/min at 300 bar | Engine: Vanguard 35 HP 26 kW Salmon 45/240 | 60 l/min at 200 bar | Engine: Vanguard 35 HP 26 kW DIMENSIONS / WEIGHT: Dimensions without water tank LxWxH: approx. 760x1,250x1,200 mm Dimensions with 400 l water tank LxWxH: approx. 1,220x1,250x1,200 mm Dimensions with 800 l water tank LxWxH: approx. 1,670x1,250x1,200 mm Unladen weight without water tank: approx. 300 kg Unladen weight with 400 l water tank: approx. 320 kg Unladen weight with 800 l water tank: approx. 350 kg HIGH-PRESSURE PUMP: - Manufacturer: HPP - Model: CLW ENGINE: - Manufacturer: Vanguard - Model: 35 HP - Fuel: Petrol - Max. Output: 35 HP (26 kW) CONTROL PANEL: - Start button - Hour meter - Electronic fuel gauge - LED indicator for oil temperature - LED indicator for low engine oil pressure - LED indicator for clogged air filter - LED indicator for rpm monitoring - LED indicator for generator - LED indicator for spark plugs - Emergency stop button ELECTRICAL CONTROLS: - Hydraulic hose reel wind/unwind - Bypass on/off - RPM adjustment +/- - Emergency stop button - Switch to radio remote control INSTALLED ALARM: - Water shortage protection against high-pressure pump dry running with automatic shut-off feature. SAFETY AND PRESSURE CONTROL VALVES: - The unit is equipped with a safety valve, a pressure regulating valve, and a pressure gauge. HIGH-PRESSURE HOSE REEL: - Type: Electric hose reel - Material: Stainless steel - Capacity: max. 80 m ½" and 80 m 3/8" high-pressure hose - Hose: 80 m ½" high-pressure hose (included) - Hose guide: Manual LOW-PRESSURE WATER SUPPLY HOSE REEL: - Type: Manual hose reel - Material: Stainless steel - Capacity: max. 35 m ¾" low-pressure hose - Hose: 35 m ¾" low-pressure hose (included) WATER FILTER: - With washable cartridge and drain valve - Filtration degree: 50 mesh Pgodpfxef Aruge Amfer SCOPE OF DELIVERY: - IMET multifunction radio remote control: - Engine on/off - Bypass on/off - RPM adjustment +/- - Hydraulic hose reel wind/unwind - Emergency stop button - Battery charger for radio remote control - 300, 400, 500, or 800 l (with steel frame) polyethylene water tank OPTIONS ON REQUEST: - Pulsation/booster pump - 50 or 60 m ½" high-pressure hose - 50, 60, or 80 m 3/8" high-pressure hose with G3/4" fitting ACCESSORIES ON REQUEST: - STORZ kit for hydrant connection - UNI 45 kit - Version with 2 HP hose reels - Mobile hot water generator 10 kW – 12 VDC - Kit with high-pressure spray gun, swivel joint, and quick coupling - Kit with high-pressure lance including 15° flat spray nozzle / rotary nozzle - Kit with high-flow lance - Kit with rotary nozzles - Kit with twin-head nozzles - Kit for water sandblasting lance - Kit for detergent injector - Step cleaning device - Surface cleaner - Sludge suction device (Venturi) - Pipe cleaning nozzles - Further accessories available on request

Stanje: zelo dobro (rabljeno), Naprodaj je profesionalni Telestream PRISM MPS-300, namenjen spremljanju, analiziranju in nadzoru video signalov SDI/IP v aplikacijah za oddajanje in v profesionalnih AV sistemih. Naprava je bila preverjena in je v delovnem stanju. Prižge se pravilno, zaslon na dotik deluje. Stanje naprave je prikazano na fotografijah. Na fotografijah med testiranjem je prikazan tudi delujoči generator SDI 12G UHD – 3840 × 2160 / 59,94 Hz. Model: Telestream PRISM MPS-300 Serijska številka: MPS-300 S011149 Različica programske opreme: 3.5.2 Izbrane povezave in funkcije: SDI vhodi: SDI1 / SDI2 SDI I/O: SDI3 / SDI4 10/25GE vmesnik REF IN / REF OUT AUX OUT DisplayPort GPIO Ethernet LAN USB izhod za slušalke podpora za profesionalne signale UHD/12G SDI vgrajen zaslon na dotik prenosna konstrukcija z ročajem Napajanje: 100–240 V AC, 50/60 Hz. V kompletu so tudi profesionalni kabli RF/SDI, prikazani na fotografijah, vključno s kabli Amphenol RF 095-850-193-012. Podpfx Aezvl Tlsmfogr Oprema je iz profesionalne uporabe. Na ohišju so lahko prisotni običajni znaki uporabe in shranjevanja. Obseg prodaje je natančno v skladu s fotografijami.

Stanje: rabljeno, 2x KWB Powerfire TDS 300 Wood Chip Boilers / Wood Chip Heating System – approx. 600 kW For sale: 2 units of KWB Powerfire TDS 300 wood chip boilers, operated together as a cascade system. Pjdey A Ewtspfx Amfogr 👉 Total output: approx. 600 kW ⸻ Technical Highlights: • Rotary grate combustion system – robust, self-cleaning • Cyclone combustion chamber – clean combustion, low emissions • Lambda control – optimal efficiency • Fully automatic output adjustment • Automatic heat exchanger cleaning • KWB Comfort 3 control system • Suitable for wood chips and pellets ⸻ Advantages of cascading: • Flexible output regulation according to demand • Very efficient in partial load operation • Each boiler can be operated separately • Redundancy / fail-safe operation ⸻ Scope of delivery: ✔ Including feed auger with both boilers (approx. 1 m auger with motor, mounted directly to the boiler – conveys fuel directly into the combustion chamber) ⚠️ Note: Discharge / conveying system (room discharge) is not included → Available on request for an extra charge ⸻ 📍 Location: Mosonmagyaróvár, Hungary 👉 approx. 80 km from Vienna 👉 approx. 35 km from Parndorf TOP HEATING SYSTEMS – Used heating systems, boilers, heat pumps & accessories direct from stock We are a family-run business with around 20 years of experience in heating technology and operate a 1,500 m² warehouse in Mosonmagyaróvár, Hungary, with a constantly available inventory of approx. 50–60 units. 📍 Location: Our warehouse is in Mosonmagyaróvár, Hungary – approx. 15 km from the Austrian border and approx. 80 km from Vienna. Mosonmagyaróvár is the first major city on the Hungarian side after the Austrian border. 🔥 Our range includes among others: • Wood chip boilers • Pellet boilers • Wood gasification boilers • Log wood boilers • Biomass boilers • Oil and gas boilers • Heat pumps • Thermal ventilators • Hot air blowers • Warm air heaters • Industrial heaters • Buffer tanks • Heat exchangers • Feeding screws • Discharge systems • Burners • Pumps • Extensive heating accessories ⚙️ Accessories and components: In addition, we offer a wide range of accessories, including circulation pumps, plate heat exchangers, and many other components – from private to industrial scale. 🏭 Brands in our range: Fröling, Hargassner, KWB, HDG, Binder, ETA, Herz, Guntamatic, Windhager, Viessmann, Buderus, and many more. 🌐 Current offers: A large part of our current offers can be found on our website: topheatingsystems.com We also have additional units not yet listed. 📅 Viewing: Viewing in our warehouse is possible by prior appointment. If interested, please feel free to contact us – we are happy to help you find the right solution.

Stanje: novo, Leto izdelave: 2025, Vakuumski mešalnik je zasnovan za mešanje mletega mesa. Zaradi frekvenčnega regulatorja je mogoče uravnavati hitrost. Mikroprocesorsko upravljanje je nemškega podjetja ADITEC. Delovni del je spiralne oblike z lopaticami. TEHNIČNI PODATKI: MODEL: BM 300 Delovna prostornina: 300 l / 220 kg Vgrajena moč: 3 kW Hitrost gredi: frekvenčni regulator Pgsdpfx Aewq D Rbemfjr Vrsta gredi: lopatasta Izpraznjevanje: sprednji ventil Napetost: 380 V 50 Hz Pritisk zraka: 6 bar Dimenzije (D x Š x V): 1310 x 920 x 1500 mm.

Stanje: rabljeno, Opis: Industrijski robot Kuka Roboter KR 300 R2500 ultra, nadzorni sistem KRC 4, ročni terminal KCP 4. Kompletna omarica za nadzor, kabli in upravljalna plošča. Na zalogi 4 kosi. Pgsdpfx Amsyghrgsfsr

Stanje: zelo dobro (rabljeno), Leto izdelave: 2007, obratovalne ure: 16.906 h, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 300 mm, pomik osi Y: 200 mm, pomik po osi Z: 200 mm, Oprema: dokumentacija / priročnik, hladilna enota, Sodick AQ 300 L delovne ure: 16.906 leto izdelave: 2007-11 linearni servo nadzor x, y, z: 300 x 200 x 200 mm u, v: 80 mm premer žice: 0,15-0,3 mm (nameščen 0,25 mm) max. dimenzije obdelovanca: 740 x 440 x 200 mm (x,y,z) max. teža obdelovanca: 300 kg hladilnik deionizacijska kartuša popolna dokumentacija Pjdpfx Aezgu I Tsmfegr stroj je pod napetostjo za pregled

Stanje: novo, new! completely made of stainless steel Pjdpfx Amjzwu D Nsfogr 2 speeds (20 and 40 revolutions per minute) 2 directions of rotation 3.3 / 4.4 kW inspection staircase can be folded up safety lid front discharge via a discharge flap with CE marking suitable for feeding with “Easy Connect” external dimensions (L x W x H): 1,750 x 950 x 1,650 mm (open lid: H: 2,100 mm) loading height approx. 1,350 mm drum dimensions (L x W x H): approx. 860 x 670 x 565 mm + feeding system for standard trolleys

Stanje: novo, Type Bartumb (hergestellt von N & N) NEU! MC-Steuerung mit 50 Programmen Beladung: max. 160L mit Vakuumpumpe “Busch” 21m³ 2,3 kW Gewicht 380 kg Abmessungen (L x B x H): ca. 1.320 x 1.380 x 1.540 mm Stufenlos einstellbare Drehzahl von 2 bis 9 U/min Psdezwu Hqopfx Amfegr Eine Vielzahl von Produkten, darunter alle Arten von Salaten, Fleisch und Fisch, können mit der Bartumb gemischt bzw. getumbelt werden.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2008, Weishaupt RGMS 30 dvojnestni gorilnik plin + težko olje Moč: 2300KW Leto izdelave: 2008 Ogled je možen le po telefonskem dogovoru! Prednostna prodaja trgovcem, podjetjem ali za izvoz. Vsi podatki brez garancije, napake in vmesna prodaja so pridržani. Podpjmnqbwefx Amfjgr Prodajalec ne prevzema odgovornosti za tipkarske ali prenosne napake. Seveda uredimo vse formalnosti. Nakladanje je možno.

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2024, obratovalne ure: 100 h, vrsta upravljanja: ročni, stopnja avtomatizacije: polavtomatski, vrsta aktuacije: električni, proizvajalec krmilnikov: ABB, vhodna napetost: 400 V, vhodna frekvenca: 50 Hz, vrsta vhodnega toka: trifazni, vrsta hlajenja: voda, priključek za stisnjen zrak: 8 letvica, Oprema: centralizirani mazalni sistem, dokumentacija / priročnik, hladilna enota, nujno zaustavitev, Sale of High-Pressure Unit 90PW3 Model: 90PW3 (explosion-proof motor) Manufacturer: Power (Tianjin) Technology Co. Key technical specifications: - Maximum pressure: 140 MPa (expandable to 276 MPa by changing the hydraulic head) - Rated flow: 30 L/min - Rated power: 90 kW - Transmission ratio: 2.75:1 - Rated speed: 530 RPM - Plunger diameter: 18 mm - Dimensions: 2000 × 1200 × 800 mm - Weight: 1200 kg Main components included: - 90PW3 high-pressure triplex pump Pedpfx Ameyxy D Tsfogr - Explosion-proof motor - Coupling with elastic pins - Booster centrifugal pump (feed) - Bag filter + Y-strainer - Pneumatic valve (automatic opening at 55 MPa) - Control panel with indicators - ABB soft starter - Water storage tank with level control (IFM sensor), PLC-controllable pneumatic inlet valves Technical advantages of the equipment: - Forced lubrication – prevents overheating due to friction - “Super-simple” maintenance: quick removal of packing and valves

Leto izdelave: 2021, stanje: novo, Hosokawa Alpine and Mikropul ACM and ZPS spare parts for your mills ACM 2 - ACM 150 or ZPS 100 - ZPS 630. Other manufacturers or types on request. Pgodpfx Amogn Edlsfjr Spare parts such as: grinding discs, classifiers, impact liners, complete bearings (new, used or reconditioned), grinding stones with carbide plates, air guide wheels or grinding pins. We have over 25 years of experience with highly wear-resistant spare parts!

Stanje: zelo dobro (rabljeno), Na prodaj vakuumska črpalka Rietschle VFT 40 (111) priznanega nemškega proizvajalca. Naprava je namenjena za industrijske aplikacije, ki zahtevajo ustvarjanje podtlaka, npr. v pakirnih strojih, tiskarskih, lesnoobdelovalnih, CNC strojih ter v vakuumskih transportnih sistemih. Črpalka je opremljena s trifaznim motorjem Flender ATB-Loher z močjo 1,5 kW in je nameščena na robustni montažni plošči. Pgjdpfeziw N Sjx Amfsr Tehnični podatki: Proizvajalec: Rietschle Model: VFT 40 (111) Leto izdelave: 1996 Država izdelave: Nemčija Tip: vakuumska črpalka Zmogljivost: 40 m³/h (50 Hz) 48 m³/h (60 Hz) Maksimalni podtlak (končni tlak): 150 mbar (abs) Moč motorja: 1,5 kW (50 Hz) / 1,8 kW (60 Hz) Hitrost vrtenja: 1420 obr/min (50 Hz) 1680 obr/min (60 Hz) Napajanje: 3×400 V Razred zaščite motorja: IP54 Serijska številka: 1749048 Stanje: Rabljeno. Videz ustreza fotografijam. Robustna konstrukcija pripravljena na nadaljnje obratovanje.

Stanje: dober (rabljeno), Leto izdelave: 2007, obratovalne ure: 9.953 h, Funkcionalnost: popolnoma funkcionalen, skupna širina: 2.440 mm, skupna dolžina: 7.150 mm, skupna višina: 2.590 mm, pritisk: 1.000 letvica, obratovalni tlak: 1.000 letvica, gorivo: dizel, skupna masa: 12.500 kg, največja hitrost vrtenja: 1.700 obr/min, kapaciteta rezervoarja za vodo: 1.600 l, lastna masa: 12.500 kg, moč: 480 kW (652,62 KM), tlak vode: 1.000 letvica, delovna prostornina: 15.874 cm³, zmogljivost črpalke: 193 l/min, Oprema: Na voljo je tipska ploščica, vrtilna hitrost brezstopenjsko nastavljiva, High-pressure pump unit Hammelmann HDP 362 in a BDF / WAB container. Not Kamat, Uraca, or Woma, but similar. Pump type: Hammelmann HDP 362 PRESSURE STAGE 1: Operating pressure: 1000 bar Flow rate: 193 l/min Changeover valve for 4 consumers, each with individually adjustable pressure installed. Drive speed: 1700 rpm Plunger: d50 mm Drive power: 360 kW Pjdpfowz Ekqsx Amfjgr with 480 kW Deutz TCD 2015 V08 4V Stage 3 diesel engine with workshop and changing room. Dimensions (LxWxH): approx. 7150x2440x2590 mm Weight: approx. 12,000 kg Year of manufacture: 2007 Operating hours: 9,953h (machine hours) Condition: The high-pressure pump is in good used condition.

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2003, obratovalne ure: 7.951 h, Funkcionalnost: popolnoma funkcionalen, skupna širina: 2.450 mm, skupna dolžina: 7.600 mm, pritisk: 1.000 letvica, obratovalni tlak: 1.000 letvica, gorivo: dizel, skupna masa: 9.000 kg, največja hitrost vrtenja: 2.100 obr/min, lastna masa: 9.000 kg, leto zadnje generalne obnove: 2025, tlak vode: 1.000 letvica, zmogljivost črpalke: 205 l/min, Oprema: Na voljo je tipska ploščica, vrtilna hitrost brezstopenjsko nastavljiva, High-pressure pump unit Hammelmann HDP 402 in WAB container. Similar to but not Kamat, Uraca, or Woma. Pump Type: Hammelmann HDP 402 PRESSURE STAGE 1: Psdpjipadxofx Amfsgr Operating pressure: 880 bar Flow rate: 242 l/min PRESSURE STAGE 2: Operating pressure: 1000 bar Flow rate: 205 l/min Drive speed: 2100 rpm Plunger: d50 mm Drive power: 400 kW With 442 kW Caterpillar C-15 2CPXL14.6ESK diesel engine With workshop and changing room. Dimensions (LxW): approx. 7600x2450 mm Weight: approx. 9000 kg Year of manufacture: 2003 Operating hours: 7,951 Condition: High-pressure pump has received new valves. New batteries. In good used condition.

Stanje: zelo dobro (rabljeno), Profesionalna varilna postaja ZEVATRON HTT 75/300, namenjena avtomatskemu potopnemu varjenju elektronskih komponent, kablov in sklopov, ki zahtevajo ponavljajoči se proces varjenja. Naprava je opremljena z dvema neodvisnima varilnima posodama z elektronsko regulacijo temperature, avtomatskim robotskim manipulatorjem in nadzorno ploščo z zaslonom na dotik, ki omogoča programiranje delovnih parametrov. Stroj je bil izdelan v Nemčiji leta 2016 in se uporablja v proizvodnji elektronike, raziskovalnih in razvojnih laboratorijih ter industrijskih obratih. Delovno ohišje je opremljeno z zaščitnim pokrovom in priključkom za priključitev sesalnega sistema za odvajanje hlapov. Tehnični podatki Proizvajalec: ZEVATRON GmbH Model: HTT 75/300 Tip: Tischlötautomat (avtomatska varilna postaja) Leto proizvodnje: 07/2016 Napajanje: 230 V / 50 Hz Moč: 920 W Nominalni tok: 4,0 A Dve neodvisni varilni posodi (Lötbad A in Lötbad B) Dva elektronska regulatorja temperature Operaterska plošča z zaslonom na dotik Psdpfozmap Ajx Amfjgr Programirljivi delovni parametri Avtomatski manipulator za potapljanje delov Gumb za nujno zaustavitev (E-STOP) Priključek za priključitev sesalnega sistema za odvajanje hlapov Navodila za uporabo so priložena

Stanje: Okvarjen nosilec rezervnih delov (rabljen), Leto izdelave: 1990, Funkcionalnost: nefunkcionalno, stružna dolžina: 600 mm, premer struženja: 300 mm, potovalna razdalja osi X: 175 mm, pomik po osi Z: 670 mm, moč vretenovega motorja: 11 W, vrtljajska hitrost (min.): 3.500 obr/min, skupna dolžina: 2.620 mm, skupna širina: 1.480 mm, skupna masa: 4.000 kg, prehod palice: 65 mm, nos vretena: MT-NO.7, Oprema: dokumentacija / priročnik, DAINICHI F25 CNC turning center, manufactured in Japan. A robust and reliable CNC lathe suitable for precision turning and general production applications. The machine offers a rigid construction, hydraulic chucking and automatic tool changing, making it suitable for both small and medium production series. The machine is available for inspection and can be demonstrated upon request. TECHNICAL SPECIFICATIONS CNC control: FANUC CNC turning center Maximum turning diameter: approx. 300 mm Maximum turning length: approx. 600 mm Swing over bed: approx. 500 mm Spindle bore: approx. 65–77 mm* Spindle speed: up to approx. 3,000–3,500 rpm* Turret: automatic turret, 10 stations* Hydraulic chuck Hydraulic tailstock Coolant system Chip conveyor * Specifications to be confirmed according to the individual machine configuration. ADVANTAGES DAINICHI Japanese machine construction Robust and rigid CNC turning center Pgedpfezwdqrsx Amfer FANUC CNC control Hydraulic chuck and tailstock Suitable for general turning and production work Machine available for inspection Immediate availability < < < THE MACHINE HAS A FAULT ON THE REGULATOR AND IT'S NOT FUNCTIONAL. CAN BE REPAIRED OR USED FOR SPARE PARTS. > > > IT HAS AN ALMOST NEW 3 WAY JAW CHUCK

Stanje: kot nova (razstavni stroj), Leto izdelave: 2026, PTC JTR-C Cold Water Trailer, similar to but not Dynajet, Oertzen, Falch, ROM, Rioned, Karo, ... - Single-axle trailer on a hot-dip galvanized frame, with jockey wheel, parking brake, automatic reverse gear, support legs, rear lights and reflectors, towing eye for 50 mm coupling, 13" tires and ABS. The following cold water models are available: JTR-C 60/200 | 60 l/min at 200 bar | Engine: Kohler KDW 1404 26 kW JTR-C 75/150 | 75 l/min at 150 bar | Engine: Kohler KDW 1404 26 kW Pedpfx Ajfdkbgomfegr JTR-C 75/210 | 75 l/min at 210 bar | Engine: Kohler KDW 2204 37.5 kW JTR-C 84/190 | 84 l/min at 190 bar | Engine: Kohler KDW 2204 37.5 kW JTR-C 102/150 | 102 l/min at 150 bar | Engine: Kohler KDW 2204 37.5 kW Engine types: TIER III (Kohler) or Stage V (Yanmar) - Dimensions: 3,370 x 1,640 x 1,540 mm - Unladen weight: approx. 600 kg - High-pressure pump: HPP - HP hose reel: fixed and manual or hydraulic with max. 100 m 1/2" and 60 m 3/4" hose (included) - Water supply reel: manual with 50 m 3/4" hose - Water tank: 600 l - Options such as remote control, warning beacon, work light and accessories available on request

Stanje: kot nova (razstavni stroj), Leto izdelave: 2026, obratovalne ure: 1 h, - High-pressure cleaners PTC TORPEDO MINI-E 3.8 M 230/50 Powersteam and TORPEDO MINI-E 5.8 T 400/50 Powersteam, similar but not Dynajet, Oertzen, Falch, etc. - Cold water / hot water / steam 32 bar up to 140°C / high-pressure steam 150 or 200 bar up to 150°C for cleaning and disinfection The following models are available: - TORPEDO MINI-E 3.8 M 230Volt/50Hz Powersteam 8 l/min. at 150 bar - TORPEDO MINI-E 5.8 T 400Volt/50Hz Powersteam 8 l/min. at 200 bar Pgjdpfx Aofh Skasmfor - Dimensions and empty weight: 110x64x98 cm, approx. 150 kg - Incl. 10 m high-pressure hose, spray gun, lance and 25° flat jet nozzle