Termo Transferni Tiskalnik nakup rabljenega (955)

Stanje: rabljeno, En god brukt termisk overføringsskriver fra Domino – modell V320i med berøringsskjermkontroller og skriverens monteringsramme. Iedowmfp Dopfx Abxeth

Stanje: pripravljen za uporabo (rabljen), Dobro ohranjen termo-transfer tiskalnik znamke Open Date Equipment Ltd - model 107L - z intermitentnim (prekinjenim) gibanjem in veliko tiskalno površino 107 x 160 mm - kompletno z ogrodjem, napajalnikom, tipkovnico, programsko opremo in kabli. Navodila na voljo Itjdpfx Ajyg Nlujbxsh Pripravljen za pošiljanje po svetu Izvozna dokumentacija na voljo Dodatne slike in videoposnetke lahko zahtevate preko WhatsAppa

Stanje: rabljeno, pripravljena za tisk, toner vključen Isdpfx Abszfwf Eoxjth

Stanje: dober (rabljeno), Mahr statistics printer Digimet SP1 incl. manual Itodoni Rtpspfx Abxeh

Leto izdelave: 2010, stanje: zelo dobro (rabljeno), številka stroja/vozila: LNDE002222, Ink technology: Ultrachrome® Colors: Photo Black, Matte Black, Cyan, Vivid Magenta, Yellow Minimum droplet size: 3.5 pl Nozzle configuration: 360 nozzles (black), 360 nozzles per color Itsdpspitkrefx Abxeh Print resolution: 2,880 x 2,880 dpi Paper formats: A0, A1, A2 (42.0 x 59.4 cm), DIN A3+, A3 (29.7 x 42.0 cm), A4 (21.0 x 29.7 cm), B1 (72.8 x 102.8 cm), B2 (51.4 x 72.8 cm), DIN B3, DIN B4, 17 inch, 24 inch, 44 inch Page margins – single sheet mode: 3 mm (top), 3 mm (right), 14 mm (bottom), 3 mm (left) Supported media thickness: 0.08 mm – 1.5 mm Duplex: NO Equipment / further details: supplied with roll stand

Stanje: zelo dobro (rabljeno), številka stroja/vozila: 9056423, Config. No.: 096-104-00404 Equipment / Additional information: Maximum print area: Width: 3.4 inches / 86 mm Length (with standard memory): 39 inches / 991 mm Resolution: 300 dpi / 12 dots per mm Maximum print speed: 8 inches / 203 mm per second Label and liner width: 0.79 inches / 20 mm – 3.54 inches / 90 mm Iedpjvf Ifajfx Abxjth Ribbon width: 0.79 inches / 20 mm – 3.4 inches / 87 mm

Stanje: zelo dobro (rabljeno), TÜV badges were last produced Itedpfx Aovf Ig Debxjh

Stanje: zelo dobro (rabljeno), Leto izdelave: 2014, številka stroja/vozila: V9042700001, Performance: Print speed: Full color/Mono: 65 ppm, A4 Iedpeu Egzqsfx Abxoth Counter reading: Total color: 1,262,651 // Total B/W: 753,781 Format (cm): max. 45 x 32 SRA3 Paper weight (g/m²): up to 300 Resolution: 1200 x 4800 dpi Colors: 4 colors Equipment / further details: The machine is capable of producing brochures, stapling, and folding.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2011, številka stroja/vozila: 3130055185, with Freeflow print server and clear toner Counter (millions): 7.3 Iedsh Nvm Djpfx Abxsth Colours: 4 + varnishes Format: A7 – A3+ (SRA3) Equipment / further details: Image resolution: 2400 x 2400 dpi VCSEL ROS Productivity/Print speeds – AWM • 80/100 pages per minute (8.5" x 11"/A4 Letter), all weights 55–350 g/m² (15 lb Bond to 130 lb Cover) • 4800/6000 A4 (Letter) 4/0 prints in full process colour per hour • 44/50 ppm (11" x 17"/A3–12" x 18"/SRA3), all weights 55–350 g/m² (15 lb Bond to 130 lb Cover) • 2400/3000 (11" x 17"/A3–12" x 18"/SRA3 Tabloid) 4/0 prints per hour and 4800/6800 (8.5" x 11"/A4) IMP Paper format/sizes • Maximum sheet size: 13" x 19.2" (330 x 488 mm) • Minimum sheet size: 7.2" x 7.2" (182 x 182 mm), tray inserter kit support for 4" x 6" (102 mm x 152 mm); see optional high-capacity feeder • Maximum print area: 12.83" x 19.05" (326 mm x 484 mm) • Maximum image safety area: 12.48" x 19.05" (317 mm x 484 mm) The machine can staple, punch, fold and trim edges Complete machine with software & RIP Brochures, flyers, business cards Envelopes can also be printed Various spare parts Contains: 1x cyan bottle, 1x yellow, 1x blue, 1x red 1x Kit Beet Assy – FSR Module IEC 1x Chamonix Waste Toner Bottle 2x Waste Toner Container 10x Cartridge M 006R01472 3x Cartridge C 006R01471 4x Cartridge K 006R01470 2x Cartridge Y 006R01473 7x Staple Cartridges 008R12925 1x Belt Assy-IBT 064K93191 8x Fuser Belt Assemblies 1x Chamonix Deutemle 1x MM Assy-1 5x Copy Cartridge 4x Chamonix Corotion Assy

Stanje: zelo dobro (rabljeno), Leto izdelave: 2004, številka stroja/vozila: TA-2004/251, (Printing, Copying, Scanning) Performance: - Colour: up to 50 pages/min in DIN A4 - Black: up to 65 pages/min in DIN A4 Paper formats: - Tray 1-2: Custom size up to A3 - Tray 3: A4 - Tray 4: A4 - Multi-purpose tray (Tray 5): Custom size up to SRA3 and 13 x 19 inches Paper weight: - Tray 1-2: 64 to 220 g/m² - Multi-purpose tray (Tray 5): up to 300 g/m² Duplex: Yes (1-1, 1-2, 2-2, 2-1) Document feeder: Duplex document feeder for 250 sheets Print volume: Maximum 200,000 pages per month Ijdsxb U S Iopfx Abxjth Features / Other information: - With RIP Copying: - Copy resolution: 2400 x 2400 dpi - Zoom: 25% - 400% Printing: - Technology: Laser printer - Print resolution: 2400 x 2400 dpi - Duplex printing: Standard Scanning: - Scan resolution: 200 x 200 dpi, 300 x 300 dpi, 400 x 400 dpi, 600 x 600 dpi Electrical requirements: 230 V, 50/60 Hz

Stanje: zelo dobro (rabljeno), Leto izdelave: 2020, številka stroja/vozila: G366J310535, Zähler: Farbe gesamt: 2.878.974 / Schwarzweiß gesamt: 2.961.001 Format/Größen: Maximale Größe: 330 x 660 mm Maximale Standardblattgröße: 330 x 488 mm Minimale Größe: 98 x 146 mm Iodpfx Aboxuhw Rsxsth Ausrüstung / weitere Angaben: Mit Fiery PRODUKTIVITÄT/DRUCKGESCHWINDIGKEIT • Durchschnittliches monatliches Druckvolumen: Bis zu 80.000 Seiten • Maximale Auslastung: 750.000 Seiten • 80 Seiten/Min. (A4), 52–350 g/m² mit Leistungspaket • 80 Seiten/Min. (A4), 52–220 g/m² • 60 Seiten/Min. (A4), 221–350 g/m² • 44 Seiten/Min. (A3), 52–350 g/m² mit Leistungspaket • 44 Seiten/Min. (A3), 52–220 g/m² • 32 Seiten/Min. (A3), 221–350 g/m² BILDQUALITÄT • 2400 x 2400 dpi VCSEL ROS Für gestochen scharfe, detaillierte Schatten und strahlende Lichter • 1200 x 1200 x 10 RIP-Rendering ohne Downsampling für optimale Ultra-HD-Leistung

Stanje: zelo dobro (rabljeno), Printing method: Thermal transfer / direct thermal Resolution: 203 dpi, 300 dpi, or 600 dpi Print speed: 200 mm/sec (203 dpi), 152 mm/sec (300 dpi) Maximum print width: 116 mm Itjdjh Eh Ttjpfx Abxjh Interfaces: USB 2.0, RS232, Ethernet 10/100 Base T, 2x USB master interface, slot for CompactFlash memory card

Stanje: skoraj kot novo (rabljeno), Industrijski tiskalnik etiket, kot nov, za aplikacije tiskanja in samodejnega nanašanja v logistiki, odpremi, pakiranju in označevanju v proizvodnji. Proizvajalec: Zebra Technologies Tip: industrijski tiskalnik etiket Serija: ZE500 Model: ZE500-4 Izvedba: Legi-Air 4050 LH Stanje: kot nov Količina: 1 Serijska številka: 67J193100183 Način tiskanja: direktni termični in termotransfer tisk Širina tiskanja: do 104 mm Ločljivost: 300 dpi Širina medijev: do 114 mm Napetost omrežja: 100–240 V AC Frekvenca: 47–63 Hz Nazivni tok: 4 A Upravljanje: prednji zaslon s tipkovnico Izvedba: OEM tiskalni modul za sisteme print-and-apply Obratovanje s tiskarskim trakom: da Ijdpfezdux Hex Abxeth Področja uporabe: odpremne nalepke, paletne nalepke, označevanje izdelkov, logistično označevanje Proizvajalčeva oznaka tiskalnega modula: ZE500-4 Sistem Legi-Air: 4050 LH

Stanje: zelo dobro (rabljeno), Leto izdelave: 2017, Stratasys 3D Printer PolyJet J750 Itsdpfxsyly Auo Abxsh With the Stratasys J750 3D printer, you can optimize and streamline the process of producing models from various materials on a single build platform within the same print job. During the design phase, components of a model can be assigned colors. The model can then be saved as a VRML file and printed with the desired colors. Ongoing maintenance package until June 2026, including spare parts. The Stratasys J750 3D printer features a build volume of 490 mm × 390 mm × 200 mm (19.3 × 15.35 × 7.8 in). Power connection 100–120 VAC, 50–60 Hz, 13.5 A, single phase or 220–240 VAC, 50–60 Hz, 7 A, single phase Technical specifications Overall length: 1,400 mm Overall height: 1,100 mm Overall width: 1,260 mm Input electricity type: Alternating current (AC) Net weight: 430 kg Input voltage: 230 V Input current: 13 A Input frequency: 50–60 Hz Ambient temperature (min.): 18 °C Ambient temperature (max.): 25 °C Applications Rapid prototyping Concept modeling Medical models Production tools and jigs Color textures

Stanje: kot nova (razstavni stroj), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2020, obratovalne ure: 300 h, The price applies to the machine from the demo center, including an additional tank and a second build platform. - Build volume: 250*250*250 mm - Scanning speeds up to 12 m/s - Layer thickness from 0.05 mm - Accuracy of +/- 0.1% over segment length - Granite return frame - Control of key operating parameters - Pump-fed refill capability - High-performance vacuum recoating system - Key components from Spectra-Physics, Advanced Optowave, SCANLAB, and Panasonic The machine features an open material platform – consumables from all manufacturers can be sourced directly and processed. Iodpfjhvim Ejx Abxeth Transport, commissioning, and consumables are not included in the price. The local UnionTech partner handles installation, training, and service!

Stanje: kot nova (razstavni stroj), Leto izdelave: 2023, obratovalne ure: 200 h, The system is located at the BIBUS Austria Demo Center and can be inspected and tested at any time. In total, the device can process 14 materials – in addition to common plastics such as ABS, PLA, TPU, and Carbon PA, it also supports high-performance polymers such as Ultem, Peek, CarbonPeek, and Helios-Peek. The Hyperspeed upgrade can be performed at any time and increases the system’s productivity in dual mode by 65%. The cost for this is €35,000, including hardware, software, and service. Four material dryers are included in the scope of delivery. Payment terms: advance payment, exclusive of transport and commissioning – these costs are location-dependent and will be invoiced based on the delivery address. Ijdsibikwopfx Abxjth

Stanje: kot nova (razstavni stroj), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2024, obratovalne ure: 200 h, skupna dolžina: 2.128 mm, skupna širina: 1.294 mm, vhodna napetost: 400 V, trajanje garancije: 6 meseci, vhodni tok: 32 A, laserska moč: 100 W, kapaciteta rezervoarja: 32 l, volumenski pretok: 20 m³/h, Stroj za lasersko sintranje poliamida z dvema izmenljivima posodama in razpakirno postajo. Stroj si je mogoče kadar koli ogledati in preizkusiti v demo centru BIBUS-Austria. Poleg tega ima sistem hitro menjavo med vlečno rezilo in premaznim valjem – sistem je vedno na najnovejšem tehnološkem nivoju, saj so se izvajale stalne nadgradnje. Itjdjqwkypjpfx Abxeh

Leto izdelave: 2024, obratovalne ure: 500 h, stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Tukaj se prodaja celovit koncept. 1. 3D kovinski tiskalnik Trueprint 1000 G06, l. 2024, 500 laserskih ur 2. Ultrazvočna sito postaja Assonic 1000, stara 1 leto 3. Moker ločevalnik Ruwac NA7-11, star 1 leto 4. F 90 omara za materiale, stara 1 leto 5. Köttermann omara za tlačne plinske jeklenke, rabljena, inštalacija v omari stara 1 leto Itsdjzdq Rfspfx Abxsh 6. Odsesovalni sistem za prostor in za omaro za tlačne plinske jeklenke. Dovod zraka v odsesovalnem sistemu je opremljen z grelnim elementom in lahko vpihuje predhodno ogret zrak (pozimi). Vse naprave so delujoče in to lahko potrdimo s poskusnim zagonom. Odstranitev naprav je v breme kupca.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2010, Na voljo je UV-tiskalnik Mimaki, vključno z UV-pretočnim sušilnikom Kühnast. 1) UV-LED ploskovni tiskalnik Mimaki UJF-3042, letnik: 2010, tiskalne dimenzije X/Y: 300mm/420mm, maks. višina materiala: 50mm, maks. ločljivost X/Y: 1440dpi/1200dpi, dimenzije stroja X/Y/Z: pribl. 1200mm/1000mm/800mm, teža: pribl. 120kg. 2) UV-pretočni sušilnik Kühnast 3000, letnik: 1998. Obe stroji je potrebno preveriti. Ogled na lokaciji je možen. Itodpfx Abozfp H Usxsh

Stanje: rabljeno, Murrplastik MVPS G3 Tiskalnik etiket, Potter 2 kos. + Iodszcgx Rspfx Abxeth Dodatki

Stanje: zelo dobro (rabljeno), 3D Systems Model: DT60 Build volume: 600 x 450 x 450 mm Isdpfszd Tugex Abxeth External dimensions: 1265 x 780 x 1725 mm Z-axis precision: 1.25 micron X and Y-axis precision: 7.5 micron Max. extruder temperature: 500 ºC Max. build chamber temperature: 120 ºC Nozzle diameter: 0.6 mm Additional available nozzle diameters: 0.2 / 0.4 / 0.8 / 1 / 1.2 mm Thermal barrier made from titanium Two independent extruders Heated filament supply 4 Print Modes: SINGLE, DUAL, TWIN, REFLEX 220 - 240 V, 50-60 Hz Maximum power consumption: 3 kW/h 7” LCD touchscreen Remote monitoring capability Industry 4.0 ready: WiFi, Ethernet, HotSpot, USB MMS System - Modular Maintenance System Dual filament loading Automatic filament changeover Heated feeder Jam detection Filament end detection sensor Print recovery system Liquid cooling Double hardened glass Base fixed by vacuum High print speed Encoder-controlled positioning Condition: used Scope of delivery: (see pictures) (Sale ex location!) (Technical data subject to change and errors excepted!) For further questions, we are happy to assist you by phone.

Stanje: zelo dobro (rabljeno), 3D Systems We are offering you a 3D printer here. Solid-State Nd:YVO4 with third harmonic generation Wavelength: 354.7nm Nominal laser head output: 1450 mW (1000 mW at the resin surface under standard conditions) Zaphyr™ Coating System: Process: Interchangeable coater Adjustment: Self-leveling and self-correcting Production layer thickness: Minimum 0.05mm, Maximum 0.15mm ProScan™ Scanner Edge detection (diameter at 1/e2): Nominal in standard mode 0.13mm Wide line detection, nominal: 0.76mm Maximum drawing speed Edge detection: 3.5m/sec Itedpfxjzd Tt Aj Abxoh Wide line detection: 25m/sec Build volume capacity: RDM 750F: 650mm x 750mm x 550mm; 414l Maximum part weight: 75kg Power supply: 200-240VAC (alternating current), 50/60Hz single-phase, 30A Environmental conditions Temperature range: 20-26°C Max. permissible fluctuation: 1°C per hour Relative humidity: 20-50%, non-condensing Space requirements: Dimensions (W x D x H), unpacked: 1260mm x 2200mm x 2280mm Weight packed (without RDM): 1590kg Model: iPro 8000 Condition: used Scope of delivery: (Please see pictures) (Changes and errors in the technical data, specifications reserved!) If you have further questions, we are happy to assist you by phone.

Stanje: zelo dobro (rabljeno), Desktop Metal 3D Printer Complete System We are offering you a complete Desktop Metal 3D printer system. Desktop Metal Studio System 3D Metal Printer Complete system: 3D printer + debinding machine + sintering furnace Desktop Metal The three-part solution includes 3D printer, debinder, and furnace Manufacturer: Desktop Metal Itodpfjzd Tllex Abxeh Model: Desktop Metal Studio System Operating condition: Used (Good) Year of manufacture: 2019 Desktop Metal Studio System Includes: 1.1 Desktop Metal Studio 3D Printer Bound Metal Deposition (BMD) Technology Features: Printed materials: Metal Technology: FDM Application: Industrial Other features: Office-friendly X-axis travel: 30 cm (12 in) Y-axis travel: 20 cm (8 in) Z-axis travel: 20 cm (8 in) Description: Unlike laser-based systems that selectively melt metal powder, the printer extrudes bound metal rods—similar to an FDM printer. This eliminates the safety requirements often associated with 3D metal printing and enables new features such as the use of closed-cell infill for lightweight strength. 1.2 Desktop Metal Studio Debinder (debinding machine) Fully automatic debinding Cleaning tank: 17.4 L (in-process) / 22.5 L (storage) Description: The debinder prepares green parts by dissolving the primary binder for sintering. With a low-emission design, it does not require external ventilation and is safe for office environments. Automatic liquid distillation and recycling mean there is no need to refill between cycles. 1.3 Desktop Metal Studio Sintering Furnace Hybrid technology (microwave & conventional heating elements) Build volume: 305 x 205 x 205 mm Carbon housing Gas supply: 2 x 900 L gas cylinders Heating capacity: 20 kW Features: Function: Sintering Configuration: Chamber Heat source: Gas Other features: High temperature, automatic Maximum temperature: 1,400 °C (2,552 °F) Description: Fully automated and sized to fit through a standard office door, the furnace offers industrial-grade sintering in an office-friendly package. Built-in temperature profiles, tailored to each design and material, ensure even heating and cooling without the residual stresses typical of laser-based systems. Condition: used Scope of delivery: (see picture) (Technical data and information are subject to change and errors!) For further questions, we are happy to assist you by phone.

Stanje: zelo dobro (rabljeno), Arburg Model: Arburg Freeformer 300-3X Additive manufacturing of complex functional components With high-temperature option The new, large freeformer 300-3X processes three components using the ARBURG Plastic Freeforming (AKF) process, enabling—for the first time worldwide—the industrial additive manufacturing of complex functional parts with robust hard-soft material bonding and support structure. The designation 300 refers to the available build platform in square centimeters. Compared to the freeformer 200-3X, the build chamber now provides 50 percent more space for parts with dimensions up to 234 x 134 x 230 millimeters. “3X” stands for the three axes (x, y, and z) on which the build platform can move. About additive manufacturing: Manufacturer: Arburg Build volume [cm³]: 7,211 Build area X [mm]: 234 Build area Y [mm]: 134 Iodpfx Abjzd Tiwoxeth Build area Z [mm]: 230 Print materials: ABS, PC, PLA Category: Industrial Operating voltage: 400 / 400 V 3~50 Hz Control voltage: 24V DC Total rated current: 11 A Total connection load: 7.8 kW Year of manufacture: 2019 Operating hours: 1,483 Weight: 1,593 kg Condition: used Scope of delivery: (See picture) (Subject to modifications and errors in the technical data. All information is without guarantee!) For further questions please do not hesitate to contact us by phone.

Stanje: zelo dobro (rabljeno), Stratasys Type: Stratasys 3D Printer PolyJet Printer J750 Objet Stratasys 3D Printer The Stratasys J750 3D printers enable you to optimize and streamline the process of producing models from various materials on a single build platform within one print job. During the design phase, the J750 3D printer (with CAD software) allows you to assign colors to specific model components. The model can then be saved as a VRML file and printed in the desired colors. The Stratasys J750 3D printer offers a build volume of 490 mm × 390 mm × 200 mm (19.3 × 15.35 × 7.8 in). Power Connection: 100–120 VAC, 50–60 Hz, 13.5 A, 1-phase Or 220–240 VAC, 50–60 Hz, 7 A, 1-phase Itjdpfx Aszd Tf Eebxeh Materials: - Agilus30 family - Digital ABS Plus - Tango - Transparent - Vero family - Veroflex - VeroUltra Opaque - SUP705, SUP706 support material Applications: - Rapid prototyping - Concept models - Medical models - Tools and fixtures - Full-color textures Total print time on the machine is approx. 1483 hrs. Condition: used Scope of delivery: (see photo) (Technical data subject to change and possible error!) Should you have further questions, we are happy to assist you by phone.