Stroji Za Okroglo Krivljenje nakup rabljenega (93.584)

Stanje: generalkompletno obnovljen (rabljeno), BIEGERUNDWALZMASCHINE ROUNDO BLECHLÄNGE: 2500 mm BLECHDICKE: 30/25 mm 3 WALZEN Gbodpohx N Ukofx Anfjl GEWICHT: 19.000 kg

Stanje: novo, Condition: new Delivery time: approx. 12 weeks from order Country of origin: Turkey Price: €28,450 Leasing rate: €543.40 Bending length: 1,550 mm Max. bending capacity – construction steel: 7 mm Max. sheet thickness without pre-bending at D=5x top roller: 7 mm Max. sheet thickness without pre-bending at D=1.5x top roller: 4.5 mm Max. sheet thickness with pre-bending at D=5x top roller: 4.5 mm Max. sheet thickness with pre-bending at D=1.5x top roller: 3.5 mm Top roller diameter: 150 mm Bottom roller diameter: 150 mm Side roller diameter: 130 mm Rolling speed: 1.5 / 6 m/min Motor power: 4 kW Length: 3,750 mm Width: 960 mm Height: 1,100 mm Weight: 2,500 kg 4 rollers Top roller driven by hydraulic motor and planetary gearbox, lower rollers driven by gear and cardan shaft Hydraulic adjustment of lower and side rollers Digital display for lower and side roller positions Hardened rollers Cone bending device Hydraulic release of top roller Hydraulic drop-end bearing 2 working speeds Overload protection Mobile control panel Equipment according to CE directive OPTIONS: (Delivery time with options approx. 10 weeks) Infinitely variable rolling speed Hydraulic side support Gjdoyb Szhepfx Anfebl Hydraulic top support NC control IMPORTANT POINTS FOR CONICAL ROLLING: Maximum sheet thickness is 50% of rated capacity Cone length must be max. 30% or more than 60% of roller length Hardened rollers are recommended

Stanje: novo, Shaft diameter: 120 mm Gjdpoy Hymqefx Anfebl Roller diameter: 390 mm Motor power: 15 kW Length: 2000 mm Width: 1650 mm Height: 1900 mm Approx. weight: 4450 kg Standard features • Steel construction • 3 rolls driven by hydromotor and planetary gearbox • Horizontal and vertical operating positions • Mobile control panel • Hardened standard rolls • Hardened and ground shafts made of high-strength special steel • Digital read-outs (2 units) • 3-axis hydraulic lateral guide rolls • Two-speed operating system • Hydraulic components: Duplomatic (Italy) • Electrical equipment: Siemens (Germany) or Telemecanique (France) • Manufactured in accordance with EC safety regulations (CE marking) and ISO 9000 certification • Operating manual in English Options: NC unit with 7" screen: EUR 7,500 Capacity table: No | Profile Type | Size (mm) | Max (mm) | Min. (mm) | Rolls Type 1 | 125x25 | 1200 | Standard Rolls 2 | 200x50 | 1000 | Standard Rolls 3 | 65x65 | 750 | Standard Rolls 4 | Ø80 | 850 | Optional Rolls 5 | Ø5”x6.35 | 1500 | Optional Rolls 6 | Ø160x4 | 2800 | Optional Rolls 7 | 120x40x4 | 1800 | Optional Rolls 8 | 90x5 | 1800 | Optional Rolls 9 | 120x120x12 | 1200 | Optional Rolls 10 | 100x100x10 | 1200 | Optional Rolls 11 | 100x11 | 800 | Standard Rolls 12 | 100x11 | 1000 | Standard Rolls 13 | 100x11 | 800 | Optional Rolls 14 | UPN 220 | 1000 | Standard Rolls* 15 | UPN 220 | 1200 | Standard Rolls* 16 | IPN 220 | 1000 | Standard Rolls* 17 | HEB 120 / HEA 140 | 1200 | 1200 | Standard Rolls* 18 | UPN 120 | 10000 | Optional Rolls 19 | IPN 160 | 5000 | Optional Rolls 20 | HEB 100 / HEA 120 | 1600 | 4000 | Optional Rolls *Some rows indicate capacities for both max. and min. radii with different profile types. Optional rolls may be required for certain profile forms or dimensions.

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2025, številka stroja/vozila: M3022, vrsta upravljanja: ročni, stopnja avtomatizacije: ročni, vrsta aktuacije: hidravlični, proizvajalec krmilnikov: Delsy, model krmilnika: Digital readout, število valjev: 4, premer spodnjega valja: 330 mm, premer zgornjega valja: 350 mm, premer stranskega valja: 260 mm, premer valja: 400 mm, dolžina valja: 3.000 mm, delovna širina: 3.100 mm, delovna višina: 900 mm, najv. debelina pločevine: 22 mm, najv. debelina jeklene pločevine: 22 mm, maks. debelina pločevine iz nerjavečega jekla: 22 mm, maks. debelina aluminijaste pločevine: 30 mm, skupna masa: 13.000 kg, moč: 10 kW (13,60 KM), vhodna napetost: 400 V, vhodna frekvenca: 50 Hz, število digitalnih zaslonov: 4, trajanje garancije: 12 meseci, Oprema: dokumentacija / priročnik, kaljeni valji, naprava za krivljenje stožcev, zavrtljivi zgornji valj, Upogibna zmogljivost z dvojnim začetnim planetarnim stiskanjem širina plošče: 3000 mm Gedpfx Anoid Al Nsfobl debelina: 22 mm predgib: 18 mm --- Dolžina na valjih: 3100 mm glavni valj: 350 mm spodnji valj: 330 mm Moč: elektrika 20Hp Vac 400/50 Nameščena konfiguracija: Kaljeno površje vseh 4 valjev Pogonska sredinska valja z hidravličnim motorjem in gonili Sinhronizirano hidravlično vrtenje med valji Doživljenjska nastavitev vzporednosti valjev s torzijskim drogom Hidravlični nastavek za konično upogibanje pločevine Funkcija za kalibracijo ponovnega valjanja za zavarjene školjke Spredaj odprt izmetni konec za razkladanje zaprtih zvitih plošč Upravljalna konzola z električnimi ukazi in digitalnim prikazom Vgrajeni varnostni in nujni sistemi Originalna navodila in sheme

Stanje: zelo dobro (rabljeno), Leto izdelave: 1998, Technical data: Working width: 2000 mm Bending capacity: 25.0 mm Pre-bending: 20.0 mm CNC control Top roll diameter: 320 mm Center roll diameter: 320 mm Gbjdpfx Anjv Htnijfol Side roll diameter: 240 mm Hardened rolls Conical bending device via inclined positioning of both side rolls Mobile control panel with digital display Motor power: 11 kW CE marking Dimensions (L x W x H): approx. 4500 x 2000 x 1900 mm Weight: approx. 11 t The seller is not liable for typing or data transmission errors. The machine's visual appearance, technical condition, and wear are consistent with its age; used machines are sold without any warranty.

Stanje: novo, Condition: New Delivery time: approx. 12–14 weeks ex works Country of origin: Turkey Price: €134,000 Leasing rate: €2,532.60 Bending length: 3,100 mm Max. bending capacity (mild steel): 25 mm Max. plate thickness without prebending at D = 5x top roll: 25 mm Max. plate thickness without prebending at D = 3x top roll: 20 mm Max. plate thickness without prebending at D = 1.5x top roll: 20 mm Max. plate thickness with prebending at D = 5x top roll: 20 mm Max. plate thickness with prebending at D = 1.5x top roll: 16 mm Top roll diameter: 360 mm Lower roll diameter: 360 mm Side roll diameter: 270 mm Max. opening: 60 mm Working height: 1,510 mm Motor power: 22 kW Length: 5,560 mm Width: 2,060 mm Height: 2,050 mm Weight: 16,750 kg 4 rolls Gsdpfxjypbquj Anfsbl PLC Fully hydraulic drive for top and lower rolls (from 30 mm bending capacity for all four rolls) via planetary gearbox Hydraulic side roll adjustment with electronic synchronization Hydraulic lower roll adjustment with mechanical synchronization Adjustable clamping pressure Variable roll speed Hardened rolls Conical bending device Hydraulic drop-end bearing Mobile control panel Overload protection Operating manual in GERMAN and ENGLISH Equipment complies with CE regulations OPTIONS: Upper and side plate supports NC control IMPORTANT NOTES FOR CONICAL BENDING: The max. plate thickness is 50% of the rated capacity The cone length must not exceed 30% or must be more than 60% of the roll length Hardened rolls are recommended

Stanje: novo, Condition: New Delivery time: approx. 12–14 weeks from order Country of origin: Turkey Price: €70,300 Leasing rate: €1,328.67 Bending length: 3,100 mm Max. bending capacity – mild steel: 8 mm Max. plate thickness without prebending at D=5x top roll: 8 mm Max. plate thickness without prebending at D=1.5x top roll: 6 mm Max. plate thickness with prebending at D=5x top roll: 6 mm Gbjdpfxjypbqne Anfsl Max. plate thickness with prebending at D=1.5x top roll: 5 mm Top roll diameter: 240 mm Bottom roll diameter: 240 mm Side roll diameter: 190 mm Working height: 825 mm Motor power: 11 kW Length: 4,880 mm Width: 1,160 mm Height: 1,200 mm Weight: 6,450 kg 4 rolls PLC Fully hydraulic drive for top and bottom rolls (from 30 mm bending capacity for all four rolls) via planetary gear Hydraulic side roll adjustment with electronic synchronization Hydraulic bottom roll adjustment with mechanical synchronization Adjustable clamping pressure Variable rolling speed Hardened rolls Cone bending device Hydraulic drop-end Movable control panel Overload protection Operating manual in GERMAN and ENGLISH Equipment according to CE regulations OPTIONS: Top and side plate supports NC control IMPORTANT POINTS FOR CONICAL BENDING: The max. plate thickness is 50% of the rated capacity The cone length must be max. 30% or more than 60% of the roll length Hardened rolls are recommended

Stanje: novo, Condition: new Delivery time: approx. 12 - 14 weeks from order Country of origin: Turkey Price: €95,000 Leasing rate: €1,795.50 Bending length: 3,100 mm Max. bending capacity (mild steel): 13 mm Max. sheet thickness without pre-bending (mild steel): 12 mm Max. sheet thickness with pre-bending (mild steel): 8 mm Max. sheet thickness without pre-bending at D=5x top roll: 13 mm Max. sheet thickness without pre-bending at D=1.5x top roll: 10 mm Max. sheet thickness with pre-bending at D=5x top roll: 10 mm Max. sheet thickness with pre-bending at D=1.5x top roll: 8 mm Top roll diameter: 270 mm Bottom roll diameter: 270 mm Side roll diameter: 230 mm Max. opening: 50 mm Working height: 1,155 mm Motor power: 15 kW Length: 5,310 mm Width: 1,660 mm Height: 1,590 mm Weight: 10,050 kg 4 rolls PLC Fully hydraulic drive of top and bottom rolls (from 30 mm bending capacity on all four rolls) via planetary gearbox Hydraulic side roll adjustment with electronic synchronization Hydraulic bottom roll adjustment with mechanical synchronization Adjustable clamping pressure Variable roll speed Hardened rolls Cone bending device Hydraulic drop-end bearing Movable control panel Overload protection Operating manual in GERMAN and ENGLISH Equipment in accordance with CE regulations OPTIONS: Top and side sheet support NC control Gbedpsypbqhofx Anfsl IMPORTANT NOTES FOR CONE ROLLING: The max. sheet thickness is 50% of the nominal capacity The cone length must be max. 30% or more than 60% of the roll length Hardened rolls are recommended

Stanje: novo, Condition: new Delivery time: approx. 12 - 14 weeks from order Country of origin: Turkey Price: €62,600 Leasing rate: €1,183.14 Gjdpfx Aoypbqbonfsbl Bending length: 2,050 mm Max. bending capacity - steel: 13 mm Max. plate thickness with pre-bending - steel: 10 mm Max. plate thickness without pre-bending at D=5x top roll: 13 mm Max. plate thickness without pre-bending at D=1.5x top roll: 10 mm Max. plate thickness with pre-bending at D=5x top roll: 10 mm Max. plate thickness with pre-bending at D=1.5x top roll: 8 mm Top roll diameter: 240 mm Bottom roll diameter: 240 mm Side roll diameter: 190 mm Working height: 820 mm Motor power: 11 kW Length: 3,830 mm Width: 1,160 mm Height: 1,200 mm Weight: 5,000 kg 4 rolls PLC Fully hydraulic drive for top and bottom rolls (for bending capacity ≥ 30 mm, all four rolls driven via planetary gear) Hydraulic side roll adjustment with electronic synchronization Hydraulic bottom roll adjustment with mechanical synchronization Adjustable clamping pressure Variable rolling speed Hardened rolls Cone bending device Hydraulic drop-end Movable control panel Overload protection Operating manual in GERMAN and ENGLISH Equipment in compliance with CE regulations OPTIONS: Upper and side sheet supports NC control IMPORTANT POINTS FOR CONICAL BENDING: Max. sheet thickness is 50% of the nominal capacity The cone length may be max. 30% or must be more than 60% of the roll length Hardened rolls are recommended

Stanje: novo, Condition: New Delivery time: approx. 2 weeks from order Country of origin: Italy Bending length: 2000 mm Max. bending capacity – mild steel: 11 mm Gbedpfx Ajypbp Rjnfjl Max. sheet thickness without pre-bending at D=5x top roll: 11 mm Max. sheet thickness without pre-bending at D=1.3x top roll: 7 mm Max. sheet thickness with pre-bending at D=5x top roll: 8 mm Max. sheet thickness with pre-bending at D=1.3x top roll: 6.4 mm Top roll diameter: 225 mm Lower roll diameter: 215 mm Side roll diameter: 165 mm Rolling speed: 8 m/min Length: 3950 mm Width: 1200 mm Height: 1200 mm Weight: 4450 kg Hardened and polished rolls Siemens PGS-Classic numerical control with touchscreen Cone bending with electronic control and tilting lower roll Oil cooler Simultaneous rotation and rolling movement Simultaneous movement of rolls and supports Ability to bend variable radii (ovals, ellipses, etc.) Hydraulic micro-positioning via PLC for greater accuracy Stepless variable speed for the rolling movement Stepless variable speed for rotation Prepared for retrofitting with supports (up to 5 axes) Prepared for retrofitting with loading/unloading stations Prepared for retrofitting with CNC controls Extra-large, double-mounted swing bearing Electronic parallelism system for roll synchronization Hydraulic top roll lifting (for models with top roll diameter from 205 mm) Double linear guideway for lower roll movement Ultra-wide roll blocks "MCS" bearing system for lower rolls (4 large bearings per shaft) Centralized lubrication system Pressure gauge for constant clamping roll control Extra torque and special braking system Emergency stop safety pull cord Equipped according to "CE" regulations OPTION: Siemens PSG-Absolute CNC control with 15" touchscreen (automatic calculation of cycle for simple and complex shapes)

Stanje: novo, Condition: New Delivery time: approx. 12 - 14 weeks from order Country of origin: Turkey Price: €83,800 Leasing rate: €1,583.82 Bending length: 2,550 mm Max. bending capacity - structural steel: 15 mm Max. sheet thickness without pre-bending at D=5x top roll: 15 mm Max. sheet thickness without pre-bending at D=3x top roll: 13 mm Max. sheet thickness without pre-bending at D=1.5x top roll: 12 mm Max. sheet thickness with pre-bending at D=5x top roll: 12 mm Max. sheet thickness with pre-bending at D=1.5x top roll: 10 mm Top roll diameter: 270 mm Bottom roll diameter: 270 mm Side roll diameter: 230 mm Max. opening: 50 mm Working height: 1,155 mm Motor power: 15 kW Length: 4,760 mm Width: 1,660 mm Height: 1,155 mm Weight: 8,950 kg 4 rolls PLC control Fully hydraulic drive of top and bottom rolls (from 30 mm bending capacity for all four rolls) via planetary gearbox Hydraulic side roll adjustment with electronic synchronization Hydraulic bottom roll adjustment with mechanical synchronization Adjustable clamping pressure Variable rolling speed Hardened rolls Cone bending device Hydraulic drop-end bearing Mobile control panel Overload protection Operating manual in GERMAN and ENGLISH Equipment compliant with CE regulations OPTIONS: Upper and side sheet supports NC control system Gedpoypbp Dsfx Anfjbl IMPORTANT NOTES FOR CONICAL ROLLING: The max. sheet thickness is 50% of the nominal capacity The cone length can be max. 30% or must be more than 60% of the roll length Hardened rolls are recommended

Stanje: rabljeno, skupna dolžina: 5.250 mm, skupna širina: 1.400 mm, skupna višina: 1.600 mm, Lastna teža: 6.000 kg - Dokumentacija na voljo: Ne - CE certifikat prisoten: Ne - Serijska številka: 1011268 - Upravljanje: klasično - Število valjev [kos]: 4 - Moč [kW]: 5,5 - Največja debelina pločevine [mm]: 6 Gbodpfxjw Elvho Anfjl - Največja delovna širina [mm]: 3040 - Premer zgornjega valja [mm]: 220 - Premer spodnjih valjev [mm]: 220 - Transportne mere: 5250mm x 1400mm x 1600mm (d x š x v) - Transportna teža [kg]: 6000kg - Število transportnih paketov [kos]: 1 Finančne informacije DDV: Navedena cena je brez DDV DDV/obračun razlike: DDV je odbiten za podjetnike Dostava in odkup so možni kadarkoli za vso industrijsko opremo Lukas van Rossum

Stanje: novo, Shaft diameter: 30 mm Upper roller diameter: 148 mm Lower roller diameter: 118 mm Working speed: 2-4 m/min Motor power: 0.7 - 0.85 kW Length: 600 mm Width: 800 mm Approx. weight: 220 kg Height: 1450 mm Technical specifications: - Steel frame - Two lower rollers are driven - Direct drive via gears - Upper roller runs idle (free-rotating) Gedpfx Ansd Eqq Aefsbl - Hardened rollers - Roller shafts are hardened and ground - Dual-speed motor - Standard rollers - Adjustable guide rollers - Horizontal and vertical working position Options: - Digital display EUR 700 - Angular side guide rollers EUR 1,100 - Dual speed STANDARD - Brake motor EUR 150 PK 30 File Type Size Min. Dia Notes 150x10 20x6 1800 300 Standard Rolls 280x15 30x6 700 400 Standard Rolls 330x30 10x10 900 200 Standard Rolls 4Ø 30 Ø 10 900 200 Optional Rolls 5Ø 60x1.5 Ø 25x1.5 1000 600 Optional Rolls 1 1/2”x2.9 1/4”x1.8 600 300 Optional Rolls 750x30x3 40x20x2 1200 800 Optional Rolls 840x3 30x2 1200 800 Optional Rolls 940x40x5 30x30x4 600 300 Optional Rolls 1035x35x5 30x30x4 600 400 Optional Rolls 1150x6 20x3 600 400 Standard Rolls 1250x6 20x3 600 400 Standard Rolls 1350x6 20x3 600 400 Standard Rolls * Special washer (spacer) may be required / Only with special beam bending attachment • Capacities specified for 260 N/mm² plate yield strength

Stanje: novo, Shaft diameter: 30 mm Goded Eqqzjpfx Anfjbl Upper roll diameter: 148 mm Lower roll diameter: 118 mm Working speed: 2-4 m/min Motor power: 0.7 - 0.85 kW Length: 600 mm Width: 800 mm Weight approx.: 220 kg Height: 1450 mm Technical specifications: - Steel frame - Two lower rolls are powered - Direct gear drive system - Upper roll rotates freely (idle) - Hardened rolls - Roll shafts are hardened and ground - Dual-speed motor - Standard rolls - Adjustable guide rolls - Horizontal and vertical working positions Options: - Digital readout €600 - Angular side guide rolls €900 - Dual speed STANDARD - Brake motor €150 PK 30 File Type Size Min. Dia Notes 150x10 20x6 1800 300 Standard Rolls 280x15 30x6 700 400 Standard Rolls 330x30 10x10 900 200 Standard Rolls 4Ø 30 Ø 10 900 200 Optional Rolls 5Ø 60x1.5 Ø 25x1.5 1000 600 Optional Rolls 6 1/2”x2.9 1/4”x1.8 600 300 Optional Rolls 750x30x3 40x20x2 1200 800 Optional Rolls 840x3 30x2 1200 800 Optional Rolls 940x40x5 30x30x4 600 300 Optional Rolls 1035x35x5 30x30x4 600 400 Optional Rolls 1150x6 20x3 600 400 Standard Rolls 1250x6 20x3 600 400 Standard Rolls 1350x6 20x3 600 400 Standard Rolls * A special washer (spacer) may be required / Only with special beam bending attachment • Capacities given for 260 N/mm² plate yield strength

Stanje: novo, Shaft diameter: 50 mm Roller diameter: 155 mm Working speed: 4.5 m/min Motor power: 1.5 kW Length: 750 mm Width: 1000 mm Height: 1400 mm Weight approx.: 400 kg Technical data: Godpfsd Eqqwex Anfjbl - Steel frame - Two directly driven rollers - Rollers are hardened - Roller shafts made of special steel, hardened and ground - Roller shafts mounted in bearings - Standard rollers - Guide rollers - Horizontal and vertical working position Options: - Digital display EUR 700 - Lateral angle guide rollers EUR 1,100 - Double working speed EUR 700 PK 35 File type Size Min. Dia Notes 1. 60x10 40x10 500 400 Standard Rolls 2. 100x15 60x10 450 350 Standard Rolls 3. 35x35 20x20 900 300 Standard Rolls 4. Ø35 Ø30 600 400 Optional Rolls 5. Ø70x2 Ø30x2 1,000 500 Optional Rolls 6. 2”x2.9 1”x2.3 1,000 350 Optional Rolls 7. 70x30x2 50x40x3 1,200 1,200 Optional Rolls 8. 50x3 40x3 1,700 600 Optional Rolls 9. 50x50x5 40x40x5 800 600 Optional Rolls 10.50x50x6 30x30x3 1,000 500 Optional Rolls 11.60x7 30x4 700 400 Standard Rolls 12.60x7 30x4 800 500 Standard Rolls 13.60x7 30x4 700 500 Standard Rolls 14. UPN 80 UPN 30 1,000 500 Optional Rolls* 15. UPN 80 UPN 30 1,200 800 Standard Rolls* * Special washer (spacer) may be required / Only with special beam bending attachment • Capacities are based on plate yield strength of 260 N/mm²

Stanje: novo, Leto izdelave: 2025, premer spodnjega valja: 95 mm, premer zgornjega valja: 95 mm, premer stranskega valja: 95 mm, dolžina valja: 1.070 mm, najv. debelina jeklene pločevine: 3 mm, Oprema: dokumentacija / priročnik, naprava za krivljenje stožcev, nožno daljinsko upravljanje, nujno zaustavitev, zavrtljivi zgornji valj, - Capacity 1070 x 3 mm - Conical rolling - Swing-out top roller - Foot pedal control - Braked motor - Emergency stop - Documentation Gsdpfjwhgm Tox Anfobl - 400V

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 1985, številka stroja/vozila: 3ROLL 4000 X 6 MM, premer spodnjega valja: 300 mm, premer valja: 310 mm, dolžina valja: 4.050 mm, delovna širina: 4.000 mm, najv. debelina jeklene pločevine: 6 mm, maks. debelina aluminijaste pločevine: 6 mm, najv. debelina bakrene pločevine: 6 mm, skupna masa: 11.000 kg, skupna dolžina: 5.700 mm, skupna širina: 1.500 mm, skupna višina: 1.700 mm, vrsta vhodnega toka: trifazni, delovna dolžina: 4.000 mm, Oprema: dokumentacija / priročnik, nujno zaustavitev, 3-Walzen-Rundbiegemaschine mit Vorbiegeeinrichtung Kapazität Blechwalze: 4000 x 6 mm Blechbreite: 4000 mm Walzblechstärke: 6 mm Pyramidenbauweise, 3 Walzen mit Vorbiegefunktion Walzen für zylindrisches Biegen Konisches Biegen möglich Walzenlänge: 4050 mm Oberwalze: 310 mm Seitenwalzen: 300 mm Technische Daten: Motorleistung Walzenantrieb: 15 PS – 3 angetriebene Walzen mit Getriebemotor Leistung zum Biegen/Vorbiegen der unteren Walzen: 7,5 + 7,5 PS Konusbiegeversatz, schwenkbare Walzen für konische Werkstücke, gehärtete Gegenlaufrolle Hydraulisch öffnender Stirnseitenauswurf, große Oberwalze hydraulisch kippbar zum Entladen Elektronischer Bedienpult auf Fahrgestell, Steuerung mit Tastern und Fernbedienung Gsdevn I Hcepfx Anfobl Digitale Positionsanzeige der Walzen für Wiederholgenauigkeit Sicherheits- und Not-Aus-Einrichtungen installiert Maschine ist betriebsbereit Abmessungen: 5700 x 1500 x H1700 mm Gewicht: 11 t

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 1990, številka stroja/vozila: 4ROLL, premer spodnjega valja: 470 mm, premer zgornjega valja: 470 mm, premer stranskega valja: 420 mm, premer valja: 470 mm, dolžina valja: 3.050 mm, delovna širina: 3.050 mm, delovna višina: 1.800 mm, najv. debelina pločevine: 50 mm, najv. debelina jeklene pločevine: 45 mm, maks. debelina aluminijaste pločevine: 45 mm, najv. debelina bakrene pločevine: 45 mm, skupna masa: 43.000 kg, skupna dolžina: 7.700 mm, skupna širina: 2.410 mm, skupna višina: 2.470 mm, moč: 37 kW (50,31 KM), vhodna napetost: 380 V, vrsta vhodnega toka: trifazni, delovna dolžina: 3.050 mm, Oprema: dokumentacija / priročnik, nujno zaustavitev, PLATEBIEGEMASCHINE FACCIN – 4-WALZEN HYDRAULISCH 3000 X 40 MM MODELL 4HCI3-35/30 BAUJAHR 1990 BLECHBIEGEWALZE MIT LINEARFÜHRUNGEN, DOPPEL-VORBLECHEN (DOUBLE PINCH) Maschine in gutem, funktionsfähigem Zustand Biegekapazität: - Blechbreite: 3000 mm - Walzstärke: 40 mm - Vorbiegeleistung: 35 mm Walzendurchmesser und Maße: - Nutzlänge: 3050 mm - Zentrale Ober-/Unterwalze: 470 mm - Seitenwalzen links/rechts: 420 mm • Gehärtete Oberfläche aller 4 Hochleistungswalzen • 3 angetriebene Walzen mit Getriebe und Hydraulikmotor • Konisches Biegen möglich: Seitenwalzen schwenkbar (Kegelformung), Gegendruckrolle • Hydraulisch öffnender Stirnklappauswurf zum Entladen der fertigen Schale • Variable Walzgeschwindigkeit: hydraulisch schnell/langsam regelbar • Elektrisches Bedienpult auf Rollen mit zentralen Bedienelementen, Joysticks und drei Digitalanzeigen • Digitale Positionsanzeigen für Walzen, hohe Wiederholgenauigkeit beim Biegen und Vorbiegen Gbjdpfx Aewb Scmenfel • Hydrauliktank: 350 Liter – Elektroanschluss: 37 kW / 380 V / 50 Hz • Maschinenabmessungen: 7700 x 2410 x H 2470 mm – Gewicht: 43.000 kg

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2024, številka stroja/vozila: 4ROLL 3000X 15 MM, premer spodnjega valja: 270 mm, premer zgornjega valja: 290 mm, premer stranskega valja: 250 mm, premer valja: 310 mm, dolžina valja: 3.100 mm, delovna širina: 3.000 mm, delovna višina: 800 mm, najv. debelina pločevine: 15 mm, najv. debelina jeklene pločevine: 15 mm, maks. debelina aluminijaste pločevine: 20 mm, najv. debelina bakrene pločevine: 25 mm, skupna masa: 8.500 kg, skupna dolžina: 5.100 mm, skupna širina: 1.500 mm, skupna višina: 1.800 mm, moč: 7,35 kW (9,99 KM), število digitalnih zaslonov: 2, trajanje garancije: 12 meseci, premer stožca: 400 mm, delovna dolžina: 3.000 mm, Oprema: dokumentacija / priročnik, kaljeni valji, naprava za krivljenje stožcev, nujno zaustavitev, zavrtljivi zgornji valj, 4-valjna dvostruka pre-pinčna savijačica NOVA - Širina lima: 3000 mm - Debljina lima za savijanje: 15 mm - Debljina lima za pre-pregib: 12 mm - Minimalni savijeni promjer (ID): 350 mm Dimenzije valjaka: - Dužina površine: 3100 mm - Gornji valjak: 290 mm - Pinch (pritisni) valjak: 270 mm - Elektromotor: 10 KS Tehnički podaci: - Valjci s kaljenom površinom, visoka otpornost - Varijabilna brzina savijanja - Hidraulički pogon rotacije valjaka - Priključak za konično savijanje (valjkaste izvedbe) Gbsdpfx Aswfc S Tonfel - Sustav kalibracije za dosavijanje zavarivanih školjki - Pritisak pinch valjka podesiv prema debljini lima - Zaštita od preopterećenja za potpuno sigurnu rad mašine - Upravljačka konzola na kotačima s električnim joystick komandama - Digitalni prikaz položaja s mogućnošću memoriranja i ponavljanja procesa savijanja

Stanje: novo, Type: Motorized Working length: 1,050 mm Roller diameter: 110 mm Pre-bending capacity: 4 mm Bending capacity: 5 mm Motor: 2.2 kW Minimum bending diameter: 150 mm Top and bottom rollers driven by a single gear system. Godpfoug Un Eex Anfjbl Rollers made of high-tensile SAE 1050 certified steel. Conical bending system. Induction-hardened rollers. Wire grooves at the ends of the rollers.

Leto izdelave: 2002, stanje: zelo dobro (rabljeno), Technical specifications: Working width: 3550 mm Max. bending capacity: 42.0 mm Max. prebending: 35.0 mm CNC control system Upper roller diameter: 480 mm Second upper roller diameter: 540 mm Diameter of lateral side rollers: 480 mm Diameter of central lower roller: 480 mm Conical bending device by angular adjustment of both side rollers Mobile control panel with digital display Hydraulic drop end bearing Net weight: approx. 44 tonnes Additional equipment: Lateral bending aid Swing-away upper bending aid Additional upper roller Godoittzfepfx Anfobl The seller assumes no liability for typing or data transmission errors. The machine’s appearance, technology, and wear are consistent with its age; used machines are sold without any guarantee.

Stanje: dober (rabljeno), Technical Data: Working length: 2100 mm Maximum bending capacity: 10.0 mm Pre-bending: 8.0 mm Top roll diameter: 200 mm Bottom roll diameter: 180 mm Number of driven rolls: 3 Hydraulic drop-end bearing Cone bending device Extended rolls for section bending Gjdpfx Aewchn Ujnfobl Control panel with digital display Motor power: 5.5 kW CE marking Dimensions (L x W x H): approx. 3100 x 1150 x 1250 mm Weight: approx. 4 tons Accessories: Several sets of rolls for pipe and section rolling The seller is not liable for typographical or data transmission errors. The machine is in visual and technical condition, and wear consistent with its age; used machines are sold without any warranty.

Stanje: zelo dobro (rabljeno), Tehnični podatki: Delovna širina: 3100 mm najv. zmogljivost upogibanja: 16,0 mm najv. pred-upogib: 12,0 mm Premer zgornjega valja: 300 mm Premer stranskih valjev: 270 mm vsi trije valji poganjani kaljeni valji konusna upogibna oprema z nagibom obeh stranskih valjev vrtljiva upravljalna plošča z digitalnim prikazom hidravlični zložljivi ležaji moč motorja: 7,5 kW Dimenzije (dolžina x širina x višina): cca 5800 x 1700 x 1500 mm Lastna teža: cca 8,5 ton Gjdpfxsxyvx To Anfsbl Prodajalec ne prevzema odgovornosti za napake pri pisanju ali prenosu podatkov. Stroj je po videzu, tehniki in obrabi primeren starosti; rabljeni stroji se prodajajo brez kakršnegakoli jamstva.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2012, Tehnični podatki: Delovna širina: 2600 mm Zmogljivost upogibanja: 20,0 mm Pred-upogib: 16,0 mm Premer zgornjega valja: 330 mm Premer srednjega valja: 300 mm Premer stranskih valjev: 240 mm Gsdsx Ii Hvspfx Anfobl Stožčasta naprava za upogibanje z nagibom obeh stranskih valjev Premična upravljalna konzola z digitalnim prikazom Moč motorja: 11 kW Oznaka CE Dimenzije (dolžina x širina x višina): pribl. 5800 x 2300 x 1900 mm Teža: pribl. 11 t Dodatna oprema: Zgornja pomoč pri upogibanju Prodajalec ne odgovarja za morebitne napake pri pisanju ali prenosu podatkov. Stroj je po videzu, tehniki in obrabi primeren svoji starosti; rabljeni stroji se prodajajo brez kakršnegakoli jamstva.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2010, Tehnični podatki: Delovna širina: 6500 mm Godpfx Asx Iitijnfsbl maks. zmogljivost upogibanja: 7,0 mm maks. pred-upogib: 5,0 mm CNC krmiljenje Premer zgornjega valja: 420 mm Premer stranskih valjev: 315 mm Premer srednjega spodnjega valja: 400 mm Stožčasta upogibna naprava z nagnjenim položajem obeh stranskih valjev Premični upravljalni pult z digitalnim prikazom Hidravlični odmični ležaji CE oznaka Moč motorja: 22 kW Mere (dolžina x širina x višina): pribl. 9200 x 2350 x 1900 mm Lastna teža: pribl. 39 ton Dodatna oprema: Stranski upogibni pomočnik Zgornji vrtljivi upogibni pomočnik Stanje: Zelo dobro ohranjeno, malo rabljeno Delovne ure: 100 h Prodajalec ne odgovarja za napake pri pisanju ali prenosu podatkov. Stroj je po videzu, tehnologiji in obrabi ustrezen starosti; rabljeni stroji se prodajajo brez kakršnegakoli jamstva.