Stroj Za Prenos nakup rabljenega (87.305)

Leto izdelave: 2010, stanje: rabljeno, Tehnične podrobnosti: Postaje: 24 Približna teža stroja: 3,5 t Dusdew Udx Sjpfx Anxou Mikron Multistar CX-24 je namenjen zahtevni masovni in serijski proizvodnji družin delov in kompleksnih obdelovancev v različnih panogah, kot so elektroindustrija, avtomobilska industrija, plinska industrija, medicinska tehnika ter urarska industrija. ·Natančna serijska proizvodnja družin delov in zahtevnih obdelovancev ·Ponovljivost indeksiranja mize ± 2,5 µm ·24 večnamenskih postaj z do 44 obdelovalnimi enotami za izjemno visoke proizvodne zmogljivosti

Stanje: rabljeno, Leto izdelave: 2001, Stations: 10 / 22 Tool Holder: SK 40 Control: SIEMENS SIMATIC OP 3 Total Power Requirement: approx. 112 kW = Transfer Machine Dujdpstqqlqjfx Anxsu Drum-type indexing table with 10 workpiece stations, 22 machining units (Drilling: 7 units, Drilling & Tapping: 8 units, Drilling & Countersinking: 5 units, Drilling, Countersinking & Tapping: 2 units), each with SK 40 tool holders, motor power per unit between 4.0 and 4.5 kW, SIEMENS control system SIMATIC OP 3, equipped with an ABB loading robot. Accessories: Chuck (without jaws), chip conveyor, coolant system.

Stanje: rabljeno, Leto izdelave: 1997, Stations: 10 / 22 Tool holder: SK 40 Control: SIEMENS SIMATIC OP 3 Total power requirement: approx. 130 kW = Transfer machine Indexing drum with 10 workpiece stations, Dodpfetqqlrsx Anxouu 22 machining units (drilling: 10 units, drilling & tapping: 5 units; drilling & countersinking: 3 units; drilling, countersinking & tapping: 1 unit; tapping: 3 units), Tool holders: SK 40 for each unit, motor power per unit between 4.5 and 5.5 kW, SIEMENS control: SIMATIC OP 3, loading robot: ABB Accessories: chuck (without jaws), chip conveyor, coolant system

Stanje: pripravljen za uporabo (rabljen), A complete CNC rotary transfer manufacturing system by Winema, including interlinking, peripherals, and a washing system, is available. 1) Rotary transfer machining center Winema RV20 Flexmaster, stations: 6, machining positions: 12, max. material throughput: 42mm, internal thread 1: M16x1.5, internal thread 2: M20x1.5, bores: 8.7mm/15mm/17mm/18mm, reaming operations: 9mm/15mm/18mm, cycle time: approx. 7s, output rate: approx. 500 parts/h, control: Siemens Sinumerik 840D. 2) Bar feeder magazine Winema, tube support: 800mm, max. tube thickness: 2mm, max. bar length: 3200mm. 3) Coolant filtration unit Knoll Turbofilter, dirty tank volume: 500l, clean tank volume: 150l, filtration fineness: 50μm. 4) Cooling unit Knoll, cooling capacity: 15kW, max. oil temperature: 30°C. 5) Oil mist extraction unit UAS, separation efficiency: 96%-98%. 6) Interlinked continuous flow washing unit with automatic parts transfer. 7) Hydraulic unit. 8) Conveyor units. 9) Fire suppression system. This is a complete and interlinked production line for NC control valve manufacturing. The production of additional components can likely be set up. Documentation available. On-site inspection possible. Dodpfezbl N Sjx Anxeuu

Stanje: rabljeno, Leto izdelave: 2002, Artikel: Rotacijski avtomat Proizvajalec: Pfiffner Tip: Hydromat HB-32/45 Letnik izdelave: 2002 Duodpfjy N Agrsx Anxju Za dodatne informacije in slike nas kontaktirajte po e-pošti (at) ali

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2015, Two similarly designed CNC rotary transfer machines from Winema are available: 1) Winema RV20 Evolution Flexmaster, Year of manufacture: 2016, Stations: 8, Cycle time: 12 seconds, Machining scope: turning/drilling/milling/grooving/slotting, Collet feed stroke: 400 mm, Bar diameter: 25 mm, Length: 4200 mm, Coolant pressure: 30 bar, Production output: approx. 2,100 parts/8 hours, Control system: Bosch MTX CNC. Includes material handling system, Knoll turbo filtration unit, cooling unit, discharge conveyor, oil mist extraction, and bar feeder magazine. Dodpjyyplvsfx Anxeuu 2) Winema RV20 Evolution Flexmaster, Year of manufacture: 2015, Stations: 8, Cycle time: 12 seconds, Machining scope: turning/drilling/milling/grooving/slotting, Collet feed stroke: 400 mm, Bar diameter: 25 mm, Length: 4200 mm, Coolant pressure: 30 bar, Production output: approx. 2,100 parts/8 hours, Control system: Bosch MTX CNC (Sinumerik). Includes material handling system, Knoll turbo filtration unit, cooling unit, discharge conveyor, oil mist extraction, and bar feeder magazine. Both machines are specifically designed for the production of rotationally symmetrical components. Documentation is available. On-site inspection is possible. Machines can be sold individually.

Stanje: rabljeno, Description: General: Duedpfx Asvr Az Nenxsu Year of manufacture: 2018 Control: Fanuc Machining stations: 5 units Loading station: 1 unit Travelling range: X-axis: 450 mm Y-axis: 500 mm Z-axis: 450 mm Rapid traverse X/Y/Z: 50 m/min Turret: Number of stations: 8 Speed: 13,300 rpm Torque: 58 Nm Tool holder: HSK 63 C Workpiece/Fixture: Maximum dimensions: 350 x 350 x 350 mm Maximum permissible weight: 250 kg Media connections: 6 units NC rotary tilt table: A-axis: +/- 150° B-axis: 360° Maximum load: 250 kg Table diameter: 320 mm Equipment / Accessories: Loading/Unloading: Fanuc Robot M20i-A Chip disposal: 2x chip conveyors Coolant supply: High-pressure coolant system, 20 bar Linear measuring systems: Direct on all axes

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2004, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 61062, prehod palice: 24 mm, TECHNICAL DETAILS Spindle bore: 24 mm Bar feeder Model: IEMCA PRA52 F33 Year of manufacture: 2004 Max. bar length: 3300 mm Max. bar diameter: 9.1 mm Controller model: Siemens S7-200 Drive for parting-off unit Stroke per slide: 7.15 mm Actuation angle: 26.565° Facing chuck PKD 80 MACHINE DETAILS Operating voltage: 230 / 400V Frequency: 50 Hz EQUIPMENT Dedpjyx Ia Nsfx Anxeuu Nordmann tool monitoring with touchscreen Tool Monitor Chip conveyor (Knoll 500 K-1/450, year 2004) Oil filtration system (Knoll FKA 150) Scraper belt conveyor with coolant system High-pressure unit FKA / 250 Tubes with coolant connections Hydraulic power unit Central lubrication system Hydraulic diagram and accessories Pressure intensifier HC3 - 4.0 - B Deflector plate T-T Pneumatic accessories (for 4 cylinders) Compressed air maintenance unit DA 300 Chuck plate for jaw chuck TK420 Oil distributor 2-jaw chuck (Röhm, part no. 431074, stroke 4.25 mm) Cut-off saw with gear drive Clamping flange (diameter: 100 mm) Complete spindle unit with timing belt drive Coolant supply Cover plates for empty stations Material stop (60 mm stroke) Parting-off unit extended by 35 mm Measuring system Z axis Spindle unit with hydraulic NC axis Device for flushing clamping jaws Interchangeable parts for material clamping Stops for hydraulic unit carrier Exchange parts for bar feeder magazine Tools Tool holders Auxiliary clamping with collet Further details about the machine can be found in the attached documents.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2020, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 110 mm, pomik osi Y: 150 mm, pomik po osi Z: 150 mm, dolžina obdelovanca (maks.): 40 mm, širina obdelovanca (maks.): 80 mm, The rotary transfer machine is fully equipped; the original price of the machine is approximately €3,000,000. No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel X-axis: 110 mm Travel Y-axis: 150 mm Travel Z-axis: 150 mm Work Spindles Max. speed: 20,000 rpm Max. torque: 50 Nm Workpiece Maximum workpiece dimensions: Ø 40 x 80 mm Number of workpiece spindles: up to 24 Number of tools on the machine: up to 63 Lubrication pressure at tool center (bar): 80/110 Number of stations: 16 Repeatability of table positioning: Ø 20 x 60 mm MACHINE DETAILS Electrical Data Voltage, phase frequency: 400 V / 50 Hz Weight & Transport Dimensions Weight: 19,000 kg Transport dimensions: 400 x 300 x 340 cm EQUIPMENT Chip conveyor Frame for oil tube, extraction system and tube Loading systems Vibrators Dodpfx Anowy I Tljxjuu Cabinets / Side panels / Top duct / Cabinet upper sections Platform Polycarbonate partitions Fire protection system with control console Further information regarding transport dimensions can be found in the attached packing list.

Stanje: rabljeno, Leto izdelave: 2005, krmiljenje FANUC 160 I-MB Duodpfxsfxgiyo Anxeu odvijalni transporter za ostružke KNOLL, tip 1200 S-2, letnik 2012 4 delovne postaje

Stanje: rabljeno, Leto izdelave: 2001, X – 1.720 mm Y – 460 mm Z – 390 mm 8 orodij na revolverju Transportni trak za odrezke in hladilni sistem 2 vrtljivi mizi in 2 revolverski glavi Krmiljenje SIEMENS 840 Dodatne tehnične specifikacije so vidne na slikah. NA VOLJO 2 KOSA ZA PRODAJO! Dusdpfx Ajfxqybonxsu

Stanje: pripravljen za uporabo (rabljen), Two identical Eubama rotary indexing machines, including filtration systems, are available. Workpiece diameter: 60 mm, workpiece length: 320 mm, clamping stations: 10, indexing performance: 20 cycles/min, spindle stroke: 100 mm, drilling capacity steel/brass: 20 mm/30 mm, thread cutting capacity steel/brass: M30/M40. Documentation available. An on-site inspection is possible. Dusdpfx Anow Hglmexsu

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1994, Stations: 24, Sub-stations: 20, Side stations: 20, Axes: 2/station, Collets: 24, Production output single/double cycle: 120/240 pcs/min, Stroke: 35 mm, Max. workpiece diameter: 25 mm, Spindle speed: 20,000 rpm, Machine weight: approx. 2,650 kg, Control system: Mikron MAC 50, Operating hours: approx. 17,335 h. Documentation available. On-site inspection possible. Duodpfxow Emx Re Anxju

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1997, A rotary transfer machine for the production of ball sockets is available. Processing stations: 13, bar feeder: 0433, bar feeder length: 3000 mm, machine power: 40 kW, control system: Hydromat. Includes Bosch hydraulic unit, Knoll 450K-1 chip conveyor, Müller CL206-B coolant processing, and separate Knoll chip disposal. In 2015, the machine was upgraded with SW milling. Documentation available. On-site inspection is possible. Dedpfx Asu T Rg Rsnxouu

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2002, Stations: 6, Power: 40 kW, Control system: Siemens. Includes upstream Fischer separating head, Festo feed unit, material discharge conveyor, Knoll 450K-1 chip conveyor, year of manufacture: 2004, chip processing system with ejection and hydraulic unit. Documentation available. On-site inspection possible. Duedou T Rhbspfx Anxou

Stanje: pripravljen za uporabo (rabljen), Length: 8,225 mm, width: 3,200 mm, complete with documentation. Djdpfx Aei Ew Dpsnxsuu

Leto izdelave: 2015, stanje: pripravljen za uporabo (rabljen), Max. workpiece diameter: 42 mm, connected load: 132 kVA, length: 4,600 mm, width: 7,500 mm, height: 3,000 mm, with bar feeder. Duodpfx Asp S Sq Dsnxsu

Stanje: rabljeno, TECHNICAL DATA - Number of stations: 12 - Table indexing: 12 x 30 [°] - Collet type: SCHAUBLIN W25 - Max. clamping diameter: 25 [mm] - Max. workpiece length: 100 [mm] - Supply voltage: 3x 400 [V] - Installed power: 32 [kW] - Machine dimensions: 2700 x 2700 x 2500 [mm] - Weight: 4000 [kg] EQUIPMENT - CNC SIEMENS Sinumerik 805 - Bar feeder HYDROMAT 5.07.018-4, capacity 4200 mm - Position 1: Cut-off - Position 2: Longitudinal drilling 30/60 - Position 3: Longitudinal drilling 30/60 - Position 4: CNC turning 2 axes - Position 5: Reversing - Position 6: Radial drilling 30/60 - Position 7: CNC turning 2 axes - Position 8: Angular drilling 30/60 - Position 9: Radial drilling 30/60 - Position 10: Angular drilling 20/50 - Position 11: Radial drilling 20/50 - Position 12: Longitudinal drilling 30/60 Dusdpfxsuhbwco Anxju - Ejection between positions 12 and 1 - Workpiece conveyor belt - Chip conveyor KNOLL 450 K-1/2000 - Coolant tank KNOLL KTS-25-60-T - HP pump: 40 [bar] - Filtration KNOLL VRF 500

Stanje: rabljeno, TECHNICAL DATA - Number of positions: 16 - Indexing time: 0.7 [sec] - Max. bar diameter: 32 [mm] - Clamping type: Collet VB 32 - Max. part length: 150 [mm] - Max. number of horizontal units: 16 - Max. number of vertical units: 8 - Max. total number of units: 24 - Electrical supply: 400 [V] - Installed power: 40 [kW] - Dimensions: 9.8 x 4 x 2.9 [m] - Weight: 6,500 [kg] EQUIPMENT - CNC SIEMENS Sinumerik 805 - Bar feeder HYDROMAT Dujdpfx Aeuhbwionxeu - 2 CNC turning units (2 axes) - Parts conveyor belt - Chip conveyor - Coolant tank - Filtration

Stanje: rabljeno, TECHNICAL DATA - Number of Axes: 48 - Number of Stations: 16 - Number of Units: - Number of Units Possible Horizontally: 16 - Number of Units Possible Vertically: 7 - Max. Diameter: 45 [mm] - Max. Workpiece Diameter: 150 [mm] - Basic Unit GM50/150: * Z Stroke: 150 [mm] * Spindle Power: 5 [kW] * Spindle Speed: 0 - 8000 [rpm] - X/Y Slide: * X Travel: +/- 40 [mm] * Y Travel: +/- 20 [mm] - Dimensions: 14000 x 4800 x 3000 [mm] - Weight: 13 [t] - Operating Hours: 4283 [h] ACCESSORIES Dsdpfsu N Ivqsx Anxouu - CNC Control Bosch Rexroth INDRAMOTION MTX-L85 - Station 1: * Sawing Unit 52/100, 3 Axes - Station 2: * Slide 50/150 (manual adjustment) ref. 22.10.002-1 * Unit 50/150 ref. 22.42.001-6 (1 axis) * IKZ (internal coolant supply) - Station 3: * Slide 50/150 (manual adjustment) ref. 22.10.002-1 * Unit 50/150 ref. 22.42.001-6 (1 axis) * IKZ - Station 4: * Slide 50/150 (manual adjustment) ref. 22.10.002-1 * Unit 50/150 ref. 22.42.001-6 (1 axis) * IKZ - Station 5: * CNC Slide 50/150 ref. 22.10.001-4 (2 axes) * CNC Unit 50/150 ref. 22.42.001-6 (with CNC turning function) * IKZ - Station 6: * CNC Slide 50/150 ref. 22.10.001-4 (2 axes) * CNC Unit 50/150 ref. 22.42.001-6 (with CNC turning function) * IKZ - Station 7: * Slide 50/150 manual adjustment ref. 22.10.002.1 * Recessing Unit ref. 22.42.041.1 - Station 8: * CNC Slide 50/150 ref. 22.10.001.4 (2001) * CNC Unit 50/150 ref. 22.42.001.6 (with CNC turning function) - Station 9: * CNC Slide 50/150 ref. 22.10.001.4 * Sawing Unit ref. 22.42.039.2 - Station 10: * Slide 50/150 manual adjustment ref. 22.10.002.1 * Sawing Unit ref. 22.42.039.8 - Station 11: * CNC Slide 50/150 ref. 22.10.001.4 * Unit 50/150 ref. 22.42.001.6 (CNC turning function) - Station 12: * Slide 50/150 ref. 22.10.002.1 * Sawing Unit ref. 22.42.041.1 - Station 13: * CNC Slide 50/150 ref. 22.10.001.4 * Sawing Unit ref. 22.42.041.1 - Station 14: * CNC Slide 50/150 ref. 22.10.001.4 * CNC Unit 50/150 ref. 22.42.001.6 (turning function) - Station 15: * CNC Slide 50/150 ref. 22.10.001.4 * CNC Unit 50/150 ref. 22.42.001.6 (turning function) * IKZ - Station 16: * CNC Slide 50/150 ref. 22.10.001.4 * CNC Unit 50/150 ref. 22.42.001.6 (turning function) * IKZ - Bar Feed Magazine Length: 4 meters - Coolant Tank KNOLL (2000 liters) with high pressure pump HP 60 [bars] - Chip Conveyor

Stanje: rabljeno, TECHNICAL DATA - Number of axes: 27 - Number of stations: 12 - Number of processing stations: 9 - Indexing time: 2 [sec] PROCESSING UNIT - Designation: UV151-3 - Number of units: 1 Dujdpfx Ansv Rgy Hoxju - Travel distance X/Y/Z axes: 110 / 150 / 135 [mm] - Rapid traverse speed: 6500 [mm/min] - Resolution: 0.001 [mm] PROCESSING UNIT - Designation: UV50-3 - Number of units: 8 - Travel distance X/Y/Z axes: 40 / 120 / 100 [mm] - Rapid traverse speed: 6500 [mm/min] - Resolution: 0.001 [mm] SPINDLES - Spindle type: Electrospindle Ø38 * Number of spindles: 14 * Tool interface: ISO10 * Spindle speed: 18,000 [rpm] * Spindle drive power: 0.25 [kW] - Spindle type: Electrospindle Ø38 * Number of spindles: 4 * Tool interface: ISO10 * Spindle speed: 9,000 [rpm] * Spindle drive power: 0.25 [kW] - Spindle type: Electrospindle Ø120 * Number of spindles: 1 * Tool interface: HSK40 * Spindle speed: 8,710 [rpm] * Spindle drive power: 3.8 [kW] - Spindle type: Electrospindle with reduction gearbox Ø38 * Number of spindles: 2 * Tool interface: ISO10 * Spindle speed: 9,000 [rpm] * Spindle drive power: 0.25 [kW] ELECTRICAL SUPPLY - Supply voltage: 400 [V] - Total drive power: 10 [kW] WEIGHT AND DIMENSIONS - Space requirement: 4600 x 3600 [mm] - Machine height: 3200 [mm] - Machine weight: 13,500 [kg] ACCESSORIES - Control system: Siemens - Coolant container - Coolant tank * with high-pressure pump - Chip conveyor - Oil mist extraction: ELBARON RON/A 120

Stanje: rabljeno, TECHNICAL DATA - Number of axes: 27 - Number of stations: 12 - Number of machining stations: 9 - Indexing time: 2 [sec] MACHINING UNIT - Designation: UV151-3 - Number of units: 1 - Travel X/Y/Z axes: 110 / 150 / 135 [mm] Dsdpfjv Rgyyjx Anxeuu - Rapid traverse speed: 6500 [mm/min] - Resolution: 0.001 [mm] MACHINING UNIT - Designation: UV50-3 - Number of units: 8 - Travel X/Y/Z axes: 40 / 120 / 100 [mm] - Rapid traverse speed: 6500 [mm/min] - Resolution: 0.001 [mm] SPINDLES - Spindle type: electrospindle Ø38 * Number of spindles: 14 * Tool holder: ISO10 * Spindle speed: 18,000 [rpm] * Spindle drive power: 0.25 [kW] - Spindle type: electrospindle Ø38 * Number of spindles: 4 * Tool holder: ISO10 * Spindle speed: 9,000 [rpm] * Spindle drive power: 0.25 [kW] - Spindle type: electrospindle Ø120 * Number of spindles: 1 * Tool holder: HSK40 * Spindle speed: 8,710 [rpm] * Spindle drive power: 3.8 [kW] - Spindle type: electrospindle with reduction gearbox Ø38 * Number of spindles: 2 * Tool holder: ISO10 * Spindle speed: 9,000 [rpm] * Spindle drive power: 0.25 [kW] ELECTRICAL SUPPLY - Supply voltage: 400 [V] - Total drive power: 10 [kW] WEIGHT AND DIMENSIONS - Required space: 4600 x 3600 [mm] - Machine height: 3200 [mm] - Machine weight: 13,500 [kg] ACCESSORIES - Control: Siemens - Coolant container - Coolant tank *with high-pressure pump - Chip conveyor - Oil mist extractor: ELBARON RON/A 120

Stanje: rabljeno, TECHNICAL DATA - Number of Axes: 27 - Number of Stations: 12 - Number of Machining Stations: 9 - Indexing Time: 2 s MACHINING UNIT - Designation: UV151-3 - Number of Units: 1 - Travel Path X/Y/Z Axes: 110 / 150 / 100 mm - Rapid Traverse Speed: 6500 mm/min - Resolution: 0.001 mm MACHINING UNIT - Designation: UV50-3 - Number of Units: 8 - Travel Path X/Y/Z Axes: 40 / 120 / 100 mm - Rapid Traverse Speed: 6500 mm/min - Resolution: 0.001 mm SPINDLES - Spindle Type: Electrospindle Ø38 * Number of Spindles: 14 * Tool Holder: ISO10 * Spindle Speed: 18,000 rpm * Spindle Drive Power: 0.25 kW - Spindle Type: Electrospindle Ø38 * Number of Spindles: 4 * Tool Holder: ISO10 * Spindle Speed: 9,000 rpm * Spindle Drive Power: 0.25 kW - Spindle Type: Electrospindle Ø120 * Number of Spindles: 1 * Tool Holder: HSK40 * Spindle Speed: 8,710 rpm * Spindle Drive Power: 3.8 kW - Spindle Type: Electrospindle Ø38 * Number of Spindles: 2 * Tool Holder: ISO10 * Spindle Speed: 9,000 rpm * Spindle Drive Power: 0.25 kW ELECTRICAL SUPPLY - Supply Voltage: 400 V - Total Connected Load: 10 kW WEIGHT AND DIMENSIONS - Required Floor Space: 4600 x 3600 mm - Machine Height: 3200 mm - Machine Weight: 13,500 kg - Accessories ACCESSORIES - Control: Siemens - Coolant Container - Coolant Tank with High-Pressure Pump - Chip Conveyor - Oil Mist Extraction: ELBARON RON/A 120 - Charger Djdpfjw Huhcsx Anxjuu - Fire Extinguishing System - Posing

Stanje: rabljeno, Leto izdelave: 2018, Funkcionalnost: popolnoma funkcionalen, The DL 45 transfer pump is an essential solution for businesses seeking to optimize liquid transfer across various sectors such as agriculture, the food industry, or chemicals. Thanks to its robust design, it guarantees reliable and long-lasting performance, ensuring efficient transfer of liquids between different containers. Indeed, this pump is perfectly suited to the demands of industrial environments, offering versatility that makes it indispensable. Moreover, its easy integration into existing production systems helps to reduce downtime, thereby increasing overall operational efficiency. With simplified maintenance, operators save time and can focus on other critical tasks. Furthermore, the DL 45 pump is ideal for high-volume transfers or more specific operations, delivering optimal performance with every cycle. In summary, this transfer pump is the perfect tool for professionals looking to improve their production process management while ensuring a smooth, uninterrupted workflow. With its proven reliability, it is a smart choice for maximizing efficiency and productivity. Technical specifications: Manufacturer: Massilly Dsdpfx Ansu H Uvxjxouu QHA 00022 A pre-owned transfer pump Year of manufacture: 2018

Stanje: novo, Leto izdelave: 2025, The MG20B is suitable for bending your reinforcing steel into the desired shape. Product Information: - Voltage: 380 V (optionally available with 220 V) - Motor power: 1.5 kW - Machine dimensions: 60 cm x 45 cm x 32 cm Duedpjm Sgx Dsfx Anxju - Frame dimensions: 57 cm x 44 cm x 60 cm - Ideal for your construction company or for use on construction sites - Easy to transport - In addition to single bend operation, a bending sequence can also be programmed - Inserts for different rebar diameters are included as accessories (including accessories, see images) - Can be operated in automatic or manual mode - Bending capacities depend on the steel grade, as per the table (see images) - Optionally available with a digital control panel - Net weight: 95 kg Shipping: Europe-wide (self-collection also possible) If you have any further questions, please do not hesitate to contact us!