Stroj Za Krivljenje Cevi Ø60 Mm nakup rabljenega (111.100)

Stanje: zelo dobro (rabljeno), Bending capacity: Ø60 x 2 mm Bending angle: 0 - 180° Turret: 12-position adjustment Mandrel length: 4500 mm Bending tools: - Ø 22 mm - Ø 25 mm - Ø 48 mm Equipped with: - 3 mandrels - Mandrel retraction device - Foot pedal - Adjustable bending speed Nodpfxjn Smq Io Ah Uewg Country of origin: The Netherlands Motor power: 7.5 kW Machine dimensions (LxWxH): 5350 x 1100 x 1100 mm Machine weight: 2300 kg

Leto izdelave: 2004, stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Stroj za razrez in 2D krivljenje aluminijastih cevi debeline 7 in 8 mm. Nwsdpfx Aoyt Sp Nsh Usg

Stanje: dober (rabljeno),

Stanje: dober (rabljeno), Leto izdelave: 1995, premer zgornjega valja: 330 mm, najv. debelina pločevine: 23 mm, Manufacturer: IMCAR Model: SIHR Year of manufacture: 1995 - Extended end for profile bending rolls (Pipe & T-Angle) - Centralized lubrication - Digital readout for side roll position - Fully hydraulic machine - Hydraulic drop end - Hardened rolls Specifications Metric / US Standard Roll width: 3100 mm Plate thickness at 3x top roll diameter: 18 mm Nwsdpfx Aowpku Djh Uog Plate thickness at 5x top roll diameter: 23 mm Pre-bending thickness: 20 mm Top roll diameter: 330 mm Side roll diameter: 310 mm Number of rolls: 3 Bending speed: 0 - 5 Side roll adjustment: 200 mm/min Number of driven rolls: 2 Power: 15 kW Dimensions (approximate) Length: 5250 mm Width: 1700 mm Height: 1700 mm Weight: 11,900 kg Please note: The information on this page is provided to the best of our knowledge and, where possible, obtained from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Therefore, it does not constitute representation or terms of contract. We strongly recommend verifying all critical details.

Leto izdelave: 1980, stanje: rabljeno, številka stroja/vozila: 80246, Maximum tube diameter: 60.3 x 3.2 mm Maximum bending angle: 180° Mandrel support length: 3000 mm Electrical connection: 380 V, 8.6 kW Space requirement: 2400 x 5700 x 1500 mm Nwjdpfj N Hfpsx Ah Usg Weight: approx. 2500 kg

Stanje: rabljeno, Leto izdelave: 2011, Pipe grinding machine – Custom-built - Pipe grinding machine with CE marking - Suitable for grinding or surface preparation of various pipes - Was used for galvanized steel pipes as a surface pre-treatment before painting - Could be modified for other materials (by using different sanding belts and possibly adapting the feed system) - Control: Mitsubishi - Automatic infeed and discharge from the machine - Multiple pipes can be loaded, processed sequentially, and temporarily stored at the discharge station - Pipes are picked up by a gripper and fed through the machine to the discharge point - Including Felder RL125 extraction unit for dust extraction Nedjx E T Swepfx Ah Uswg - Compressed air required for operation - Machine is sold without safety devices - Year of manufacture: 2011 Technical data - Min. pipe diameter: 76 mm - Max. pipe diameter: 200 mm - Min. pipe length: 3,600 mm - Max. pipe length: 10,000 mm - Connected load of the grinding machine: 6.75 kW - Connected load of the extraction unit: 3 kW - Installation footprint (without extraction unit): 2,500 x 20,500 mm

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, Premer cevi (maks.): 28 mm, Kot upogiba (maks.): 180 °, upogibna sila (maks.): 7 t, skupna masa: 250 kg, Bending capacity: 3/8" – 2" Bending angle: 180° Rotary turret: 6-fold Installed bending tool: Ø 28 mm Country of origin: Netherlands Motor power: 3 kW Machine weight: 250 kg Nwodpfx Ahowzchys Uog Machine dimensions (LxWxH): 1,000 x 800 x 950 mm

Stanje: rabljeno, Leto izdelave: 1979, Roundo valjar za pločevino/cevi. V zadnjih letih se je uporabljal predvsem za valjanje dimnih cevi s premerom 150–160 mm. V kompletu so štiri palete z valji, ki služijo za določitev premera cevi. S pomočjo pnevmatskega valja se konec odpre, da se izvleče zvita cev. Stroj sem preizkusil, vendar valji ne delujejo. Verjetno obstaja enostavna rešitev za to. Skupna teža stroja in valjev je približno 3–4 tone. Nodpfx Aoyvqc Ueh Ujwg

Stanje: novo, Condition: new Delivery time: approx. 12 weeks from order Country of origin: Turkey Price: €28,450 Leasing rate: €543.40 Bending length: 1,550 mm Max. bending capacity – construction steel: 7 mm Max. sheet thickness without pre-bending at D=5x top roller: 7 mm Max. sheet thickness without pre-bending at D=1.5x top roller: 4.5 mm Max. sheet thickness with pre-bending at D=5x top roller: 4.5 mm Max. sheet thickness with pre-bending at D=1.5x top roller: 3.5 mm Top roller diameter: 150 mm Bottom roller diameter: 150 mm Side roller diameter: 130 mm Rolling speed: 1.5 / 6 m/min Motor power: 4 kW Length: 3,750 mm Width: 960 mm Height: 1,100 mm Weight: 2,500 kg 4 rollers Top roller driven by hydraulic motor and planetary gearbox, lower rollers driven by gear and cardan shaft Hydraulic adjustment of lower and side rollers Digital display for lower and side roller positions Hardened rollers Cone bending device Hydraulic release of top roller Hydraulic drop-end bearing Nwodsyb Szhjpfx Ah Ueg 2 working speeds Overload protection Mobile control panel Equipment according to CE directive OPTIONS: (Delivery time with options approx. 10 weeks) Infinitely variable rolling speed Hydraulic side support Hydraulic top support NC control IMPORTANT POINTS FOR CONICAL ROLLING: Maximum sheet thickness is 50% of rated capacity Cone length must be max. 30% or more than 60% of roller length Hardened rollers are recommended

Stanje: novo, Funkcionalnost: omejena funkcionalnost, Leto izdelave: 2025, vrsta upravljanja: ročni, Oprema: CE označba, dokumentacija / priročnik, OMEC 4-Roller Mechanical Symmetrical Plate Rolling Machine with Double Pinch 1530×2.5 mm Brand New “CE” Certified. Made in Italy. Double Pinch Design. Powered Upper and Lower Rollers with Equal Drive. Motorized Side Rollers for Vertical Adjustment. Front Opening for Upper Roller. Special Bearings for Side Rollers. External Lever for Roller Tilt Adjustment. Sheet Clamping System with Bearing Device. 2-Pedal Foot Switch. Electrical Panel Compliant with “CE” Standards. Millimeter Scale Indicator for Sheet Clamping Position. Standard equipment included with the rolling machine: - Conical device on the upper roller (frontal). - No. 2 digital position displays for the side rollers. - No. 1 display for motorized sheet clamping. Nwedpfxoy E Sche Ah Ujg - Grinding/turning of rollers after hardening process. - Roller hardening. - Lateral sheet loading table + sheet centering guides with millimeter references. Working width: 1530 mm. Upper and lower roller diameter: 90 mm. Side roller diameter: 95 mm. Sheet thickness: 1.5 – 2 – 2.5 mm (1.5 x D, 3 x D, 5 x D). Roller hardening: HRC 55/60, depth 2 mm. Installed power: 1.8 kW. Dimensions: 2290 x 750 x 1150 mm. Weight: 690 kg.

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2010, vrsta upravljanja: ročni, stopnja avtomatizacije: polavtomatski, vrsta aktuacije: električni, število valjev: 3, premer spodnjega valja: 90 mm, premer zgornjega valja: 90 mm, dolžina valja: 1.100 mm, delovna širina: 1.030 mm, najv. debelina pločevine: 3 mm, najv. debelina jeklene pločevine: 3 mm, maks. debelina pločevine iz nerjavečega jekla: 2 mm, skupna masa: 440 kg, skupna dolžina: 1.750 mm, skupna širina: 650 mm, skupna višina: 1.100 mm, moč: 1,5 kW (2,04 KM), vhodna napetost: 400 V, Oprema: kaljeni valji, naprava za krivljenje stožcev, nožno daljinsko upravljanje, nujno zaustavitev, zavrtljivi zgornji valj, Stroj za upogibanje pločevine DURMA MRB E 1030/3mm v odličnem stanju naprodaj. Proizvajalec: Durma MRB-E 1003 Letnik: 2010 Število valjev: 3 Premer zgornjega valja: 90 mm Dolžina valjev: 1030 mm Visoko trdni jekleni valji s SAE 1050 certifikatom kakovosti - Žične utore na koncih valjev (4/6/9 mm) Oznaka CE Stožčasti valji Odprta zgornja valja Zadnji in spodnji valj ročno nastavljiv Upravljanje: nožna pedala Moč motorja: 1,5 kW z zavoro in reduktorjem Električni priključek: 400 V Nsdpfx Aoyzrcgoh Ujwg Okvir iz litega železa Teža stroja: 440 kg Dolžina: 1750 mm Širina: 650 mm Višina: 1100 mm

Stanje: novo, Condition: New Delivery time: approx. 12–14 weeks ex works Country of origin: Turkey Price: €134,000 Leasing rate: €2,532.60 Bending length: 3,100 mm Max. bending capacity (mild steel): 25 mm Max. plate thickness without prebending at D = 5x top roll: 25 mm Max. plate thickness without prebending at D = 3x top roll: 20 mm Max. plate thickness without prebending at D = 1.5x top roll: 20 mm Max. plate thickness with prebending at D = 5x top roll: 20 mm Max. plate thickness with prebending at D = 1.5x top roll: 16 mm Top roll diameter: 360 mm Lower roll diameter: 360 mm Side roll diameter: 270 mm Max. opening: 60 mm Working height: 1,510 mm Motor power: 22 kW Length: 5,560 mm Width: 2,060 mm Height: 2,050 mm Weight: 16,750 kg 4 rolls PLC Fully hydraulic drive for top and lower rolls (from 30 mm bending capacity for all four rolls) via planetary gearbox Hydraulic side roll adjustment with electronic synchronization Hydraulic lower roll adjustment with mechanical synchronization Adjustable clamping pressure Variable roll speed Hardened rolls Conical bending device Hydraulic drop-end bearing Mobile control panel Overload protection Operating manual in GERMAN and ENGLISH Equipment complies with CE regulations OPTIONS: Upper and side plate supports NC control IMPORTANT NOTES FOR CONICAL BENDING: The max. plate thickness is 50% of the rated capacity Nedpjypbquofx Ah Uewg The cone length must not exceed 30% or must be more than 60% of the roll length Hardened rolls are recommended

Stanje: novo, Condition: New Delivery time: approx. 12–14 weeks from order Country of origin: Turkey Price: €70,300 Leasing rate: €1,328.67 Bending length: 3,100 mm Max. bending capacity – mild steel: 8 mm Max. plate thickness without prebending at D=5x top roll: 8 mm Max. plate thickness without prebending at D=1.5x top roll: 6 mm Max. plate thickness with prebending at D=5x top roll: 6 mm Max. plate thickness with prebending at D=1.5x top roll: 5 mm Top roll diameter: 240 mm Bottom roll diameter: 240 mm Side roll diameter: 190 mm Working height: 825 mm Motor power: 11 kW Length: 4,880 mm Width: 1,160 mm Height: 1,200 mm Weight: 6,450 kg 4 rolls PLC Fully hydraulic drive for top and bottom rolls (from 30 mm bending capacity for all four rolls) via planetary gear Hydraulic side roll adjustment with electronic synchronization Hydraulic bottom roll adjustment with mechanical synchronization Adjustable clamping pressure Variable rolling speed Hardened rolls Cone bending device Hydraulic drop-end Movable control panel Overload protection Operating manual in GERMAN and ENGLISH Equipment according to CE regulations Nwjdpfsypbqnox Ah Uog OPTIONS: Top and side plate supports NC control IMPORTANT POINTS FOR CONICAL BENDING: The max. plate thickness is 50% of the rated capacity The cone length must be max. 30% or more than 60% of the roll length Hardened rolls are recommended

Stanje: novo, Condition: new Delivery time: approx. 12 - 14 weeks from order Country of origin: Turkey Price: €95,000 Leasing rate: €1,795.50 Bending length: 3,100 mm Max. bending capacity (mild steel): 13 mm Max. sheet thickness without pre-bending (mild steel): 12 mm Max. sheet thickness with pre-bending (mild steel): 8 mm Max. sheet thickness without pre-bending at D=5x top roll: 13 mm Max. sheet thickness without pre-bending at D=1.5x top roll: 10 mm Max. sheet thickness with pre-bending at D=5x top roll: 10 mm Max. sheet thickness with pre-bending at D=1.5x top roll: 8 mm Top roll diameter: 270 mm Bottom roll diameter: 270 mm Side roll diameter: 230 mm Nwjdpfjypbqhox Ah Usg Max. opening: 50 mm Working height: 1,155 mm Motor power: 15 kW Length: 5,310 mm Width: 1,660 mm Height: 1,590 mm Weight: 10,050 kg 4 rolls PLC Fully hydraulic drive of top and bottom rolls (from 30 mm bending capacity on all four rolls) via planetary gearbox Hydraulic side roll adjustment with electronic synchronization Hydraulic bottom roll adjustment with mechanical synchronization Adjustable clamping pressure Variable roll speed Hardened rolls Cone bending device Hydraulic drop-end bearing Movable control panel Overload protection Operating manual in GERMAN and ENGLISH Equipment in accordance with CE regulations OPTIONS: Top and side sheet support NC control IMPORTANT NOTES FOR CONE ROLLING: The max. sheet thickness is 50% of the nominal capacity The cone length must be max. 30% or more than 60% of the roll length Hardened rolls are recommended

Stanje: novo, Condition: new Delivery time: approx. 12 - 14 weeks from order Country of origin: Turkey Price: €62,600 Leasing rate: €1,183.14 Bending length: 2,050 mm Max. bending capacity - steel: 13 mm Max. plate thickness with pre-bending - steel: 10 mm Max. plate thickness without pre-bending at D=5x top roll: 13 mm Max. plate thickness without pre-bending at D=1.5x top roll: 10 mm Max. plate thickness with pre-bending at D=5x top roll: 10 mm Max. plate thickness with pre-bending at D=1.5x top roll: 8 mm Top roll diameter: 240 mm Bottom roll diameter: 240 mm Side roll diameter: 190 mm Working height: 820 mm Motor power: 11 kW Length: 3,830 mm Width: 1,160 mm Height: 1,200 mm Weight: 5,000 kg 4 rolls PLC Fully hydraulic drive for top and bottom rolls (for bending capacity ≥ 30 mm, all four rolls driven via planetary gear) Hydraulic side roll adjustment with electronic synchronization Hydraulic bottom roll adjustment with mechanical synchronization Adjustable clamping pressure Variable rolling speed Hardened rolls Cone bending device Hydraulic drop-end Movable control panel Nwedoypbqbjpfx Ah Uog Overload protection Operating manual in GERMAN and ENGLISH Equipment in compliance with CE regulations OPTIONS: Upper and side sheet supports NC control IMPORTANT POINTS FOR CONICAL BENDING: Max. sheet thickness is 50% of the nominal capacity The cone length may be max. 30% or must be more than 60% of the roll length Hardened rolls are recommended

Stanje: novo, Condition: New Delivery time: approx. 2 weeks from order Country of origin: Italy Bending length: 2000 mm Max. bending capacity – mild steel: 11 mm Max. sheet thickness without pre-bending at D=5x top roll: 11 mm Max. sheet thickness without pre-bending at D=1.3x top roll: 7 mm Max. sheet thickness with pre-bending at D=5x top roll: 8 mm Max. sheet thickness with pre-bending at D=1.3x top roll: 6.4 mm Top roll diameter: 225 mm Lower roll diameter: 215 mm Side roll diameter: 165 mm Rolling speed: 8 m/min Length: 3950 mm Width: 1200 mm Height: 1200 mm Weight: 4450 kg Hardened and polished rolls Siemens PGS-Classic numerical control with touchscreen Cone bending with electronic control and tilting lower roll Oil cooler Simultaneous rotation and rolling movement Simultaneous movement of rolls and supports Ability to bend variable radii (ovals, ellipses, etc.) Hydraulic micro-positioning via PLC for greater accuracy Stepless variable speed for the rolling movement Stepless variable speed for rotation Prepared for retrofitting with supports (up to 5 axes) Prepared for retrofitting with loading/unloading stations Prepared for retrofitting with CNC controls Nedpfxoypbp Rs Ah Ujwg Extra-large, double-mounted swing bearing Electronic parallelism system for roll synchronization Hydraulic top roll lifting (for models with top roll diameter from 205 mm) Double linear guideway for lower roll movement Ultra-wide roll blocks "MCS" bearing system for lower rolls (4 large bearings per shaft) Centralized lubrication system Pressure gauge for constant clamping roll control Extra torque and special braking system Emergency stop safety pull cord Equipped according to "CE" regulations OPTION: Siemens PSG-Absolute CNC control with 15" touchscreen (automatic calculation of cycle for simple and complex shapes)

Stanje: novo, Condition: New Delivery time: approx. 12 - 14 weeks from order Country of origin: Turkey Price: €83,800 Leasing rate: €1,583.82 Bending length: 2,550 mm Max. bending capacity - structural steel: 15 mm Max. sheet thickness without pre-bending at D=5x top roll: 15 mm Max. sheet thickness without pre-bending at D=3x top roll: 13 mm Max. sheet thickness without pre-bending at D=1.5x top roll: 12 mm Max. sheet thickness with pre-bending at D=5x top roll: 12 mm Max. sheet thickness with pre-bending at D=1.5x top roll: 10 mm Top roll diameter: 270 mm Bottom roll diameter: 270 mm Side roll diameter: 230 mm Max. opening: 50 mm Working height: 1,155 mm Motor power: 15 kW Length: 4,760 mm Width: 1,660 mm Height: 1,155 mm Weight: 8,950 kg 4 rolls PLC control Fully hydraulic drive of top and bottom rolls (from 30 mm bending capacity for all four rolls) via planetary gearbox Hydraulic side roll adjustment with electronic synchronization Hydraulic bottom roll adjustment with mechanical synchronization Adjustable clamping pressure Variable rolling speed Hardened rolls Cone bending device Hydraulic drop-end bearing Mobile control panel Overload protection Nwjdpfx Ahoypbp Dj Ueg Operating manual in GERMAN and ENGLISH Equipment compliant with CE regulations OPTIONS: Upper and side sheet supports NC control system IMPORTANT NOTES FOR CONICAL ROLLING: The max. sheet thickness is 50% of the nominal capacity The cone length can be max. 30% or must be more than 60% of the roll length Hardened rolls are recommended

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1994, Funkcionalnost: popolnoma funkcionalen, LVD PPEB 110/20 MNC 95 Press Brake Nwedpfxov Er T Uo Ah Uog Good condition Machine manual included Machine weight: approx. 9,480 kg Width: 3,600 mm Length: 2,700 mm Height: 3,000 mm

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2026, vrsta upravljanja: ročni, stopnja avtomatizacije: ročni, vrsta aktuacije: ročni, delovna širina: 1.250 mm, skupna masa: 150 kg, trajanje garancije: 24 meseci, Model RBP-125+: Tool-free removable bending segments. Segmented Sheet Metal Bending Machine – Precision Bending in a Professional Version The RBP-125+ segmented sheet metal bending machine is an advanced device that enables the production of complex profiles and precise bends, which are unachievable with conventional roof bending machines. Thanks to the segmented design of each clamping beam, our bending machines deliver versatility and precision, excelling even in the most demanding applications. Nwodpev Dvmiefx Ah Usg Versatility and Precision Our range includes segmented bending machines in three working lengths, suitable for various industries. The RBP-125+ model is the perfect solution for professionals who value quality and accuracy. A working length of 1250 mm allows the bending of sheet metal up to 0.7 mm thick, making it indispensable for complex roofing projects, including standing seam processing and the production of diamond-shaped (KARO) tiles. Innovative Design In the RBP series, all three rows of bending fingers – clamping beam, bending beam, and fixed beam – are removable and adjustable. This ensures full flexibility when working with different materials. This feature guarantees maximum precision and operator comfort, while allowing the machine to be adapted to the user’s specific requirements. Technical Data – RBP-125+ Segmented Bending Machine: - Working length: 1250 mm - Max. sheet steel thickness: 0.7 mm - Height of upper bending fingers: 55 mm - Maximum bending angle: 160° - Clearance upper bending fingers: 65 mm - Clearance lower bending fingers: 45 mm - Weight: 130 kg - Including stand with rollers Ideal for Professionals The RBP-125+ segmented bending machine is the ideal choice for roofers, tinsmiths, and metalworking shops. Its robust construction and high-quality finish guarantee durability and reliability for daily use. If you are looking for a tool that combines precision, durability, and functionality, our segmented folding machine will exceed your expectations. 📞 📧 Contact us for more information and to find the perfect model for your requirements! We ship worldwide. To calculate shipping costs, please provide your postal code.

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2021, številka stroja/vozila: V00311, radij upogibanja (maks.): 135 mm, delovna višina: 1.100 mm, teža obdelovanca (maks.): 2.500 kg, premer orodja: 60 mm, Pas de prix de réserve – vente garantie au plus offrant ! DÉTAILS TECHNIQUES Poids d’usinage maximal : 2 500 kg Capacité de cintrage : 63 x 4 mm Longueur utile pour le cintrage avec butée de tube physique : 3 000 mm Hauteur de travail : 1 100 mm Diamètre de l’outil : 60 mm Rayon de cintrage maximal : 135 mm DÉTAILS MACHINE Tension : 400 V ±10 % Écart de tension : max. -15 % pendant 1 minute Fréquence : 47-63 Hz Puissance installée NC1 : 9,70 kW Nwedpfxsy Sma Uj Ah Uog Puissance installée NC2 : 9,88 kW Courant nominal : 31 A Tension auxiliaire : 24 V CC Tension CNC : 24 V CC Classe de protection électrique : IP55 Dimensions (L x l x H) : 4 581 x 1 093 x 1 372 mm ÉQUIPEMENT OD21,3 x 3,2 mm CLR2,5D (outil de cintrage, mors de serrage, matrice, barre de pression et pince POB) OD25 x 3 mm CLR2,5D (outil de cintrage, mors de serrage, matrice, barre de pression et pince POB) OD26,9 x 2,5 mm CLR2,5D (outil de cintrage, mors de serrage, matrice, barre de pression, mandrin et pince POB)

Stanje: rabljeno, Leto izdelave: 1988, Condition: used Year of manufacture: 1988 Stock number: 090151 Delivery time: immediately, subject to prior sale Country of origin: Italy Price: €12,800 In stock: 1 Max. diameter (steel tube): 42 mm Length: 4665 mm Width: 800 mm Height: 1160 mm Weight: 1470 kg Steel tube: 42 x 2.5 mm Square section tube: 40 x 1.2 mm Rectangular section tube (horizontal): 30 x 40 x 1.7 mm Rectangular section tube (vertical): 40 x 30 x 1.3 mm Max. bending radius: 255 mm Min. bending radius: 22 mm Max. bending angle: 180° Speed: 90°/s Motor: 5.5 kW Hydraulic tank capacity: 120 l Performance data based on 400 N/mm² Nwodpexx A Eksfx Ah Ujg Largest bending radius with tube guide rollers: 255 mm Largest bending radius with tube guide carriage: 175 mm Smallest bending angle: 4° Max. usable length without positioning device: 3900 mm Max. usable length with positioning device: 3370 mm Mandrel extraction stroke adjustable from 8 mm Opening and closing stroke of clamping die: 0-45 mm Opening and closing stroke of rollers or carriage: 12-22-42 mm Operating manual in German Machine does not comply with AMVO or UVV Without tooling BUYING USED MACHINERY IS A MATTER OF TRUST – OUR TRANSPARENCY PROMISE We offer you maximum security and full transparency. • HONEST INSIGHTS: Detailed photos & functional videos of the actual condition • LIVE INSPECTION ON SITE: Live test at our premises • DIGITAL DEMONSTRATION: Individual live demonstration via video call • PURCHASE WITHOUT RISK: 14-day right of return Details:

Stanje: pripravljen za uporabo (rabljen), Cevni upogibni stroj, stroj za upogibanje cevi, stroj za upogibanje profilov, upogibni stroj za SHS/RHS, rabljeni stroj Proizvajalec: Schwarze-Wirtz Model: Perfect H135 Dimenzije: 6115 x 2870 x 1300 mm Upogibna zmogljivost: Okrogla cev: Ø 130 mm, upogibni radij: 500 mm Kvadratna cev: 30 mm, radij: 380 mm 45 mm, radij: 500 mm 50 mm, radij: 500 mm Nwedpfx Ahowhmv Us Uog 70 mm, radij: 500 mm 90 mm, radij: 500 mm Upogibni kot: do 180° Električne specifikacije: 380 V

Stanje: rabljeno, 1 kos stroj za varjenje cevi z vrtljivo mizo/delilno glavo SDT-0.5, možno variti cevi do premera 100 mm in dolžine 1000 mm, lastna izdelava, premičen. Barva: kot prikazano na slikah in po ogledu. Dimenzije (D/Š/V): 190x180x80 cm. Stanje: rabljeno. Nodjy Thlhspfx Ah Uowg

Stanje: novo, I čelik – ravno 80x20 (d1200) mm I čelik – uspravno 80x25 (d2100) mm Kutni čelik 50x50x6 (d1000) mm Puni materijal – prečnik 40 (d800) mm Kvadratni materijal 60x60x3 (d4000) mm Pravougaonik 80x30x3 (d6000) mm Maksimalni prečnik cevi 70x2 (d1600) mm Ležište 60 mm Prečnik valjka 177 mm Brzina savijanja 6,4 m/min Ukupna snaga 4 kW Težina mašine cca 970 kg Dimenzije mašine 1400x950x1450 mm Oprema: - Mašina od čelične konstrukcije (ST-52) - Pogon preko hidrauličkog motora i menjača - Osovine od specijalnog čelika (42CrMo4), kaljene i brušene - Set standardnih valjaka - Donji valjci hidraulično podesivi gore/dole - Digitalni prikaz za donje valjke Nwedpfxoyv Nwqj Ah Usg - Odvojeni upravljački pult - Bočni korektivni valjci ručno podesivi u jednom smeru - Ručno podmazivanje - Horizontalni i vertikalni rad - Uputstvo za upotrebu

Stanje: novo, I-greda - uspravno 100 x 20 (d 2100) mm Promer cevi maks. 100 x 3 (d 3000) mm Ugaoni čelik 80 x 80 x 8 (d 2000) mm Kvadratni materijal 50 x 25 x 2 (d 600) mm Puni materijal - prečnik 60,0 (d 1000) mm I-greda - položno 120 x 30 (d 600) maks. 140 mm Prihvat za alat 80,0 Broj obrtaja 4,2 o/min Težina 1600 kg Dimenzije 1240 x 1375 x 1540 mm Oprema: Nwodpeyv Nnijfx Ah Usg - Zavareno telo od čelične konstrukcije (St-52) - Valjci pogonjeni sa 3 odvojena hidraulična motora - Specijalni zupčanici od čelika - Osovine izrađene od specijalnog čelika, kaljene i brušene - Ručno podmazivanje - Vodilice valjaka hidraulički podesive - Donji valjci hidraulički pokretni gore-dole - Odvojena i pokretna komandna tabla - Horizontalni i vertikalni režim rada - Proizvodni kvalitet sertifikovan po CE, ISO 9001 - 2015, TSEK i TURQUM standardima.