Stoma Jedilna Naprava Za Magnezij In Cink nakup rabljenega (130.869)

Leto izdelave: 2017, stanje: dober (rabljeno), We are selling our etching system for magnesium and zinc, consisting of: - STOMA Etching Machine E-90L - STOMA Developing Machine 18 L - STOMA Preparation & Pre-treatment Tank - STOMA Extraction Hood 90 L All components were purchased new in 2017. The STOMA ECOLINE etching machines are primarily made from V2A-grade stainless steel. The machine housing is bolted. ECOLINE etching machines feature a separate, free-standing control panel, offering enhanced flexibility. A high-performance AC drive motor ensures reliable operation. The machines are supplied without a pre-installed extraction system or fan. The machine comes standard with a connection for direct water cooling. Tank capacity: 90L, Maximum plate format: 50 x 65 cm, Weight: 450 kg, Dimensions (LxWxH): 1315 x 1430 x 1310 mm. - For magnesium and/or zinc - Largest plate format: 50 x 65 cm - Tank capacity approx. 90L - Supply voltage: 3 x 400V - Overall required floor space approx. 2 x 2.5 m Dcedpjy H D Acefx Ac Noh STOMA Preparation Tank - Largest plate format: 50 x 65 cm - Water connection: R ½“ - Required space: 200 x 95 cm - Drain pipe Ø 50 mm STOMA Developing Machine 18L - Largest plate format: 50 x 65 cm - Approx. 18 L

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, vhodna napetost: 230 V, vhodna frekvenca: 50 Hz, Certificirano po DGUV do: 07/2027, vrsta vhodnega toka: Klimatska naprava, Stroj za mešanje in doziranje vode Aquamix 32 Popolnoma avtomatski stroj za mešanje in doziranje vode z avtomatsko nadzorovanim predtokom in številčno nastavitvijo Tehnični podatki: Dovodi temperature: 3 (z ledeno vodo) Območje doziranja: 0,1 l - 999,9 l Območje nastavitve temperature: +0,5°C do +70°C Dodpeygdayofx Ac Njch Natančnost temperature: +/-2°C Natančnost doziranja od 1 l: +/-0,1 l Pretok vode pri 3 bara: do 30 L/min Priključek za vodo: zunanji navoj 3/4" Električni priključek: 220 - 240 V Mere naprave Š x V x G: 300 x 300 x 170 mm Rabljena naprava Na zalogi imamo še druge naprave!

Leto izdelave: 2018, stanje: rabljeno, Year of manufacture refers to the final acceptance of the system; individual components may vary in age. Workpiece dimensions up to max. LxWxH: 8,000 x 2,000 x 2,000 mm. Maximum crossbar load: 2,000 kg/trolley. Material: Steel. Pos. 1: Washing cabin, Jumbo-Clean, with stainless steel interior for degreasing/phosphating of steel by automatic system or manual lance; Pos. 2: 1 set of band filters; Pos. 3: 1 automatic spray ring for the Jumbo-Clean washing cabin including central lance; Pos. 4: 1 fresh water treatment system; Pos. 5: 1 manual push track with 1 electric transverse transfer platform; Pos. 6: 1 lifting/lowering station Jumbo-Lift 2000 integrated into the transverse transfer platform; Pos. 7: 1 adhesion water/powder dryer/wet paint dryer, indirectly gas-heated, door opening WxH: 2,800 x 3,100 mm, clear length: 9,500 mm, overall WxHxL approx.: 4,000/5,000/10,000 mm; Pos. 8: 1 face-side powder extraction system for on-site paint booth for spraying and drying operation; Dedsy T Nzdspfx Ac Nech Pos. 9: 1 manual coating device OptiFlex(R)2; Pos. 10: 1 supporting structure for on-site steel structure; Pos. 11: Control cabinet.

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, Za uporabo na rezkalnih strojih z enostavno montažo na mizo stroja. Nastavljiv kotni prislon 30–150°. Drsni voziček teče gladko po krogličnih ležajih. Dolžina osnovne plošče: 1000 mm Drsna dolžina: 710 mm Dcedpfxeymlivs Ac Njh Dimenzije drsne plošče: 295 x 255 mm Vgradna višina cca 56 mm

Stanje: dober (rabljeno), Prodajamo rabljeno robotsko brusilno in polirno linijo. Naprava je v dobrem, rabljenem stanju. Vključuje: - 1x industrijski robot YASKAWA MH20 z upravljanjem NX100 Dsdjxby Sgspfx Ac Noch - 2x tračne brusilke za brusilne trakove s obsegom 3.500 mm - 2x polirni stroji z oscilacijo in pomikom za polirne kolute z maks. premerom 500 mm - 1x naložilna miza za palete z dimenzijami (DxŠ): 1.200 x 600 mm - 1x električna krmilna omara Za dodatne informacije nas kontaktirajte!

Stanje: rabljeno, Naprava za ločevanje olja in vode KAESER BEKO tip Öwamat Premer rezervoarja: 600 mm Skupna višina: 1200 mm z aktivnim ogljikovim filtrom Potrebni prostor: Ø 700 x 1200 mm Dcedpfx Ajy Ty Sasc Nsh Lastna teža: cca 30 kg dobro stanje

Leto izdelave: 2025, stanje: novo, New machine Year of manufacture: 2025 Features and technical specifications: Standard configuration: - Robust machine base body - Dowel system for: dowel diameter 8 mm dowel length 35 mm (factory setting, adjustable from 30 to 40 mm) dowel projection 12 mm (factory setting, adjustable from 7 to 20 mm) recoil-free insertion gun vibratory feeder for dowel transport dowel diameter and length control with Auto-DL-Select system - Water supply system for pre-glued dowels water tank (stainless steel, 7.5 liters) closed water system with 6 bar water pressure and spray nozzle - Electronic control system with: main power switch ON / OFF program selector switch water / water + insertion potentiometer for dowel feed rate via vibratory feeder potentiometer for water injection quantity indicator light for minimum water level in tank - Chassis/mobile base - Pneumatics: 6 bar / Electrical: 230V, 1Ph, 50Hz HoKuTech DübelJet with option for counter-bore processing: 1 unit HoKuTech | DübelJet with LeimJet expansion kit incl. devices for hanging/connecting to the DübelJet incl. height-adjustable suspension for glue hose/ Included: 1 HoKuTech | LeimJet glue dispensing unit for counter-bore application Dcsdpfswx Aadox Ac Noh for use with PVAc glues up to 75,000 mPas viscosity incl. dowel nozzle for Ø 8 mm, pointed nozzle Location: Flörsheim Availability: Immediately

Stanje: rabljeno, Leto izdelave: 1994, 1994 Bacci FCH8 dvovretenarska rezkalnica s štirimi glavami na vsaki strani (3 za rezkanje in 1 za brušenje) Dcedpfxjx Hwmbe Ac Nsh Moč motorjev: Leva stran: motor za rezkanje 1 = 7,5 kW motor za rezkanje 2 = 5,5 kW motor za rezkanje 3 = 3 kW (pri 1440 vrt/min) ali 5 kW (pri 2880 vrt/min) motor za brušenje 4 = 3 kW Desna stran: motor za rezkanje 1 = 7,5 kW motor za rezkanje 2 = 5,5 kW motor za rezkanje 3 = 3 kW (pri 1440 vrt/min) ali 5 kW (pri 2880 vrt/min) motor za brušenje 4 = 3 kW Hidravlične enote: 4,8 + 4 kW Skupna moč brez hidravličnih enot: 38 ali 42 kW Skupna moč z hidravličnimi enotami: 46,8 ali 50,8 kW Dimenzije: 7,20 x 2,40 x 1,90 m Približna teža: 5 ton.

Stanje: rabljeno, Electronic Crane Scale MWT Type 142 Serial No.: 142571 Year of manufacture: 1993 Tensile force measuring device, crane scale Measuring range: 2,500 to 80,000 kg Minimum measurable value: 20 kg Power supply via 12 Volt battery - Suspension shackle for double hook, anchor hook - Operation, saving of measurement values, and tare via remote control Dcjdpeg D H Rijfx Ac Nsh - Storage for measurement values (weights) - Printer for measurement values Very robust and high-quality steel body Net weight: approx. 200 kg

Stanje: rabljeno, Leto izdelave: 2003, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: WMD 10 404. M80, Ponúkame túto použitú linku Weinmann WMD 10 na výrobu strešných a stropných prvkov, rok výroby 2003. Typ: WMD 10 Sériové číslo: 10 404.M80 Dcedjy N S I Sspfx Ac Njh Rok výroby: 2003 Zloženie: - Multifunkčný most (1x píla, 1x sponkovačka) a LatTeq systém (automatické kladenie lát a 2x klincovačka) - Stôl na strešné/stropné panely, dĺžka 12 m so 4 NC osami a po 5 zvieracími pármi (upínanie do šírky 2,5 m) a polohovateľné valčeky (nepoháňané) - Montážny stôl 12 m s upínacím systémom (2x) a polohovateľnými valčekmi (nepoháňané) - Motýlový obracač Príchytky nie sú súčasťou predaja. Zariadenie bude v prevádzke približne do polovice júna a je možné si ho kedykoľvek obhliadnuť. V prípade otázok nás neváhajte kontaktovať. Pošlite nám prosím krátku správu s vašimi kontaktnými údajmi.

Leto izdelave: 2017, stanje: skoraj kot novo (rabljeno), MMM Uniclean® PL II 15 Single-Chamber Washer-Disinfector (As-New Condition, Year of Manufacture: 2017) Product Description (Source: MMM) High-performance single-chamber washer-disinfector for the thorough reprocessing of large quantities of medical devices such as general surgical and minimally invasive (MIC) instruments, anaesthesia materials, ophthalmological and dental surgical instruments, containers, receptacles, bowls, trays, surgical shoes, and other utensils. User Convenience - Loading baskets can be conveniently accessed from all four sides. - Easy-move rollers: Even heavy baskets can be moved effortlessly and positioned precisely inside the chamber. - Glass control panel – easy to clean. - Rubberised CoolTouch handles allow handling of hot baskets. Frame and front panel made from stainless steel 1.4301 (AISI 304) Chamber and all product-contacting fixed piping in AISI 316L Double-glazed doors with securitised safety glass Glass panel with integrated 5.7" colour touchscreen on the loading side Large remaining cycle time display and door switch on the unloading side TECHNICAL DATA Model: Uniclean PL II 15-2 EL (= Electric, not external steam) Doors: Double-door Voltage: 380 – 400 V / 50 Hz Djdpfx Acsimdtvj Nsch Heating: Electric Machine Equipment - DI water preheating tank (Tank 1) - DI water recovery tank - Sound insulation on front (Tank 2) - Sound insulation on device front - Sound insulation on side wall - Exhaust air economiser - Air break for exhaust - Conductivity measurement system - HEPA filter monitoring - Volt-free contacts - Return sluices Site-side Media Connection - Hot water connection Dosing System - 3 suction lances - 3rd dosing pump including accessories Roller Conveyor - Semi-automatic transport - Basic module for automatic roller conveyor - Preparation for automatic loading roller conveyor - Preparation for automatic unloading roller conveyor Batch Documentation and Machine Connectivity - Barcode reader system UPL II (wired) - Barcode reader for basket identification We do not assume any liability for the accuracy, completeness, or timeliness of the information provided.

Stanje: zelo dobro (rabljeno), Advantages of the GF4: - Larger working range - Clamping jaws made of aluminum - Motor enables cutting of pipes made from very hard materials - 30% machine weight reduction thanks to a new body design - Laser cutting point indicator - New ergonomic handle - Swivel-mounted cable with quick coupling Djdpfx Acsym Unze Noch The GF4 machine can be operated with the AVM automatic rotation module. Technical specifications: - Pipe outside diameter [mm]: 12 – 120 - Pipe wall thickness [mm]: 1 – 9 - Pipe inside diameter (blade Ø 63mm) [mm]: min. 21 - Pipe inside diameter (blade Ø 68mm) [mm]: min. 16 - Pipe inside diameter (blade Ø 80mm) [mm]: min. 4 - Integrated electronic speed controller: 65 – 215 rpm - Power: 1.8 kW without AVM / 1.9 kW with AVM, 200–240 V, 50/60 Hz - Protection class: II - Vibration level (EN 2662, part 1): 2.5 m/s² - Noise level: 79 dB(A) GF series machines are orbital pipe and elbow cutting machines. The pipes to be cut are clamped in a self-centering, prismatic vice, preventing deformation. Pipe diameter and—in accordance with the pipe material—tool rotational speed are quickly set using easy-to-operate mechanisms. The cutting device is guided manually by rotating it around the pipe, while an electrically powered saw blade cuts or bevels the pipe edge. This is a planetary cutting method introduced by Georg Fischer. Orbital cutting is a time-saving and cost-effective solution: - Perpendicular, flat, and burr-free cuts - Pipe ends are prepared for various joining techniques without the need for additional post-processing - Cold cutting – no overheating, thus preventing intergranular corrosion that could cause material cracking - Fast cutting – saves time and money - Beveling of pipe ends – pipe ends can be beveled simultaneously during cutting or separately Optional parts: GF and RA machines can be supplied with either the AVM automatic rotation module or the MVM manual module. - The AVM module continuously monitors cutting speed depending on torque and set parameters. - The MVM module, with a spur gear and handle, enableshead rotation at the same speed with minimal effort.

Stanje: zelo dobro (rabljeno), Precision measuring and presetting device for CNC tools from the renowned manufacturer KELCH – model Trabant 271-2/M. Equipped with a length and diameter measuring system featuring optics and a KELCH Pico LCD A23 monitor, along with Heidenhain ND1202T Tool-Chek electronics. The device is in very good condition, fully functional and complete. Technical data and equipment: • Manufacturer: KELCH GmbH + Co. Werkzeugmaschinenfabrik, Germany • Model: Trabant 271-2/M • Year of manufacture: 2000 • Measuring unit: KELCH Pico LCD (Version A23) • Readout system: Heidenhain ND1202T Tool-Chek • Power supply: 230V / 50–60Hz / 1000 VA • Optics with measuring camera and LCD screen • Rotary table with holders and two-axis adjustment system • Measuring range X/Z axes: up to approx. 400 mm • Axis control from KELCH panel (joystick + function keyboard) • Digital readout, menu available in German and English • Supplied with original documentation and complete set of connectors Condition: Dcedpjxn Ax Aefx Ac Njh • Used, fully functional • Very clean unit from a German toolroom • All axes move smoothly, screen responds correctly • Ready for operation Functional description: The KELCH Trabant 271-2/M is designed for fast and precise presetting of cutting tools before installation in a CNC machine. The optical system with Pico LCD enables visual measurement of tool length, diameter, and geometry. Ideal for inspection and presetting of milling cutters, turning tools, drills, and special tools.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2012, Na voljo je stroj za polnjenje in zapiranje velikih pločevink JBT FoodTech iz živilske industrije. Teža pločevinke: 750g/1000g, vsebina: sladkano kondenzirano mleko, največja zmogljivost: 600 pločevink/min, polnilne glave: 22, zapiralne glave: 5, izvedba: monoblok, upravljanje: Siemens. Dokumentacija je na voljo. Možen ogled na lokaciji. Dcjdpfx Aoy N Uv Sec Neh

Stanje: rabljeno, Leto izdelave: 1993, Največja debelina pločevine: 3 mm Razdalja med sredinama valjev: 125 mm Iztek maks.: 500 mm Teža ca. 500 kg Debelina materiala pri trdnosti 40 kg/mm²: max. 3 mm Iztek: 500 mm Delovna globina: 450 mm Ročno nastavljanje zgornjega valja Razdalja med sredinama valjev: 125 mm Dcodpfsy Iha Ujx Ac Njh Delovna hitrost brezstopenjska: 3–15 m/min Odbijačna pregrada Vključuje 1 par valjev Desni/levi tek preko nožnega stikala

Stanje: zelo dobro (rabljeno), Leto izdelave: 2018, Funkcionalnost: popolnoma funkcionalen, WOLFF - Naprava za ločevanje in izpiranje peska Dodpsy N Rtyefx Ac Nsch

Leto izdelave: 2004, stanje: nepreverjeno (rabljeno), Funkcionalnost: nepreverjeno, dolžina plošče: 3.000 mm, širina plošče: 1.200 mm, višina zlaganja: 1.600 mm, TEHNIČNI PODATKI Največja širina plošče: 1.200 mm Največja dolžina plošče: 3.000 mm Največja višina sklada plošč od tal: 1.600 mm Djdpjyxnqujfx Ac Noch OPREMA Sistem gibanja: priseski Vakuumska črpalka Stroj se prodaja in dobavlja v dejanskem in pravnem stanju ("videno-kupljeno") na podlagi fotodokumentacije in tehnične/komercialne dokumentacije opisnega značaja. Kupec ima pravico, da blago pred prevzemom pregleda in prevzema odgovornost za montažo, varovanje in uporabo stroja na ciljni lokaciji. Zunanja referenca: 7684

Stanje: dober (rabljeno), Load capacity: 200 kg Tipping height: 2200 mm Container size: 800x600x550 mm Dcjdpfx Aceum Slvo Nsh

Stanje: rabljeno, Leto izdelave: 2005, leto zadnje generalne obnove: 2011, RAZPRODAJA ZALOGE NAPRODAJA NAJNIŽJEMU PONUDNIKU PO PRINCIPU "KDOR PRVI PRIDE, PRVI SLUŽI"; TAKOJŠNJA ODPREMA MOŽNA SEZNAM DRUGIH STROJEV IZ ISTEGA OBRATA NA VOLJO NA ZAHTEVO Parilnik/blin za tekstilne tkanine (Ager), leto 2005, uporabljen le nekaj let! Nato skrbno ohranjen in skladiščen. Proizvajalec: Zimmer Dcsdpfoy A S Uxsx Ac Nsh Model: Thermocure UHD 3 Universal Loop Steamer Za obratovanje z nasičeno paro 102–104 °C Možnost pare z visoko temperaturo do največ 185°C Možnost vročega zraka do največ 170°C Leto izdelave: 2005 Stroj kot nov, uporabljen le nekaj let v eni izmeni; po letu 2011 konzerviran Tehnični podatki: • Največja širina materiala: 200 cm • Največja vsebina materiala: 240 m • Dolžina zanke: največ 2,8 m • Kvaliteta blaga: tkanine ali pletenine – enojna širina • Največja mehanska hitrost: 5–50 m/min • Čas parjenja: 5–40 min • Ogrevalni medij: nasičena para, min. 3 bar, maks. 8 bar • Povprečna poraba pare: pribl. 500–1000 kg/h Ogrevalni medij za visokotemperaturno obratovanje: termično olje, 280°C, 12 m³/h, pribl. 280 kW Servisna napetost: 3 x 400 V, 50 Hz Krmilna napetost: 230 V, 50 Hz Moč električnega pogona in ventilatorja: pribl. 28 kVA Stisnjen zrak: ½”, 6 bar + Enota za ogrevanje s termičnim oljem za visokotemperaturno parjenje, tip HEIZA Model: HW - S - 02 / K z gorilnikom Weishaupt, plinski pogon STROJ JE PRENOVLJEN, PROFESIONALNO OZNAČEN, DEMONTIRAN IN SHRANJEN NA PODU TOVARNE – PODROBEN VIDEO NA VOLJO Za dodatne informacije, tehnične podrobnosti, fotografije ali video nas kontaktirajte. Takojšnja odprem možna.

Stanje: novo, Stroj za brušenje in oblačenje štanc Uporaba: > Brušenje štanc: radiji, posneti robovi in oblike (npr. pravokotnik, šesterokotnik, podolgovata odprtina itd.) Djdpfxoymxxqs Ac Noch > Oblačenje brusnih plošč: radiji in posneti robovi Osnovna naprava: Obseg vpenjanja prizme Ø 4–25 mm Zaklepanje v 24 položajih po 15° ali brezstopenjsko fiksiranje Prizma nastavljiva za 38 mm Mere: dolžina 216 mm, širina 103 mm, višina 131,5 mm Teža: 6,8 kg Obseg dobave: Osnovna naprava Nosilec diamanta za brušenje radijev Nosilec diamanta za brušenje posnetih robov 2 kosa oblačilnih diamantov Navodila za uporabo

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, Chip extraction unit CORMAK FM230A + 2.5 m hose The CORMAK FM230A chip extraction unit is a high-performance sawdust extractor designed for the efficient removal of wood chips, shavings, and dust generated during woodworking processes. This compact chip extractor is perfectly suited for joinery workshops, production plants, and home workshops where effective dust extraction at workstations is required. Dedeytn Tdspfx Ac Njch The model comes equipped with a flexible extraction hose, 2.5 m in length, allowing quick connection of the chip extractor to woodworking machines such as planers, table saws, spindle moulders, or thicknessers. This setup enables the dust extraction system to be easily positioned anywhere in the workshop, ensuring efficient removal of dust and chips directly from the generation source. A powerful extraction fan delivers an airflow rate of up to 1080 m³/h, ensuring fast and effective suction of wood dust and chips. Its robust construction and metal impeller guarantee stable operation, high durability, and reliability—even under intensive use in a carpentry environment. The mobile design with wheels makes it convenient to move the device between workstations, and the integrated filtration system with collection bags effectively separates the air from the wood chips. As a result, the wood dust extractor keeps the workshop clean and improves both working comfort and safety. Key Features - Includes 2.5 m Ø100 mm extraction hose - High extraction efficiency – up to 1080 m³/h - Powerful fan for wood chips and shavings - Single-phase motor 0.75 kW / 230 V - Durable metal impeller for chip extraction - Mobile design with transport wheels - Efficient filtration system for chips and wood dust - Large waste bag for extended operation - Compact design ideal for woodworking shops Applications The CORMAK FM230A chip and dust extractor is designed for use with a variety of woodworking machines that require effective dust extraction: - Planers and jointers - Thicknessers - Table saws - Spindle moulders - Wood sanders With its high airflow rate, the dust and chip extractor effectively removes debris generated during woodworking, improving visibility at the workplace and reducing airborne dust. Standard Equipment - CORMAK FM 230A chip extractor - 2.5 m extraction hose Ø100 mm - Filter bag - Waste bag - Clamping bands - Mobile base with wheels Technical Specifications Motor power: 0.75 kW Power supply: 230 V / 50 Hz Extraction capacity: 1080 m³/h Motor speed: 2800 rpm Vacuum: 1000 Pa Noise level: 68 dB Number of bags: 2 Suction inlet diameter: 100 mm Hose length: 2.5 m Bag capacity: 90 l Height: 1800 mm Width: 750 mm Length: 450 mm Weight: 27 kg

Stanje: rabljeno, Leto izdelave: 2018, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: DOCAT 70, Ponujamo ta rabljen generator ozona in napravo za odstranjevanje Tonello ECOFREE 2, letnik 2018. Tip stroja: DOCAT 70 Napajanje: 3Ph+GND Napetost in frekvenca: 400V-50Hz Tlak stisnjenega zraka: bar Hidravlični tlak: bar Največji parni tlak: bar Teža: 300 kg Dcedpfeyvzznsx Ac Noh Prostornina bobna: l Serijska številka: 07758 Leto izdelave: 2018 Vgrajena moč: 4 kW Največji konični tok: 7 A Največji delovni tok: 3 A Prerez napajalnega kabla: 4 mm² Če imate vprašanja ali potrebujete dodatne informacije, nam pišite ali nas pokličite.

Stanje: rabljeno, Debelina pločevine 4,0 mm Premer valja cca 120 mm Iztegnitev 450 mm Dsdpfxsy D A Eqj Ac Nsch Teža stroja cca 0,48 t Dimenzije cca 1,3 x 0,8 x 1,8 m

Leto izdelave: 2013, stanje: zelo dobro (rabljeno), Lifting and tilting device – swiveling unit for emptying, filling, and tilting bulk materials / small parts, etc. Manufacturer: Schüssler Type: HS-F1000 Year of manufacture: 2013 Hydraulic swiveling Load capacity: 1,000 kg Mobile design, equipped with a locking spindle for swiveling operations. Version with bulk material chute, manually adjustable steplessly. Dodpsh Dbnpefx Ac Noch Push-button operation for up/down and emergency stop. Dead weight: 700 kg

Stanje: zelo dobro (rabljeno), CO2 laserske naprave za kodiranje in označevanje Macsa ID serije K. Djdexf Dmvepfx Ac Nsch Proizvajalec: Macsa ID Tip: SPA K-1030 Napajanje: 125 V/230 V; 50/60 Hz; (1 faza + N) 660 VA Označevalna glava: KS2-1000-10,2 μm, zaprta CO2 laserska cev, HF tehnologija, 10,2 μm Delovna razdalja: 85–400 mm Dimenzije: 235 x 193 x 656 mm Teža: 40 kg IP54 Večfunkcijska in touch panel Macsa ID TSL-Plus Proizvajalec: Macsa ID Tip: Zaslon na dotik 10.1-M_ICON-2