Sm Innotech Gmbh & Co.kg Incapcell 22-18 nakup rabljenega (79.588)

Leto izdelave: 2019, stanje: rabljeno, Ponujamo ta rabljeni laminator SM Innotech GmbH & Co.KG Incapcell 22-18, letnik 2019. Naprava ima zelo malo obratovalnih ur, saj je bila uporabljena kot poskusni stroj za testne namene. Posamične posodobitve programske opreme ali druge spremembe so možne po dogovoru. Naprava je na voljo takoj. Iisdpfxjy Dq D Ie Ab Aob Če imate vprašanja ali potrebujete več informacij, nam prosim pišite ali nas pokličite.

Leto izdelave: 2018, stanje: kot nova (razstavni stroj), Funkcionalnost: popolnoma funkcionalen, Ponujamo ta razstavni stroj SM Innotech Laminator Incapcell 35-18, letnik 2018. Proizvajalec: SM Innotech GmbH & Co.KG Model: Incapcell 35-18 Letnik izdelave: 2018 Stanje: razstavni stroj ID kategorije: 33 Vrsta stroja: laminator Na voljo sta 2 kosa tega stroja, oba sta nova, saj še nikoli nista bila v uporabi. Iisdpfey Druuex Ab Aeb Če imate vprašanja ali potrebujete več informacij, nam pišite ali nas pokličite.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2015, obratovalne ure: 20.331 h, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 100 t, širina odprtine za polnjenje: 970 mm, dolžina polnilne odprtine: 1.800 mm, dolžina bale: 1.200 mm, širina bale: 1.100 mm, višina bale: 750 mm, teža bale: 750 kg, skupna masa: 33.000 kg, Good day, We hereby offer, subject to prior sale, a used, complete baling line consisting of a baler from the manufacturer HSM, type VK 8818 R-FU including conveying technology and wire tying stations. The following technical data have been taken from the operating manual and manufacturer brochures. We assume no liability for the correctness or completeness of this information. Technical Data Baler: Manufacturer: HSM GmbH + Co. KG, Germany Type: VK 8818 R-FU Year of manufacture: 2015 Operating hours: 20,331 hours, as of September 2025 Number of bales pressed: 29,020 bales, as of September 2025 Main press force: 1,000 kN Specific press force: 120 N/cm² Shear-edge ejector press force: 121 kN Feed opening dimensions: 970 x 1,800 mm Theoretical cycle time in idle operation: 8.3 seconds Theoretical throughput: 643 m³/hour Bale dimensions: 1,100 x 750 mm, length variable from 600 up to 2000 mm Drive capacity: 2 x 45 kW, frequency-controlled Total connected load: 110 kW Total current consumption: 213 A Fuse protection: 250 A slow-blow Tying: 5-fold horizontal, fully automatic Throughput rates at bulk density of 20 kg/m³: 12.86 t/hour bulk density of 50 kg/m³: 32.15 t/hour Bale weight at a bale length of approx. 1.2 m: 650 to 750 kg per bale, depending on material Hydraulic oil tank volume: 2,000 L HVI 46 PLC: Siemens S7-300 Operator panel: Siemens TP 700 Dimensions (assembled): 12,130 x 4,800 x 3,270 mm (L x W x H) Installation dimensions with conveyor technology: 35,000 x 8,480 x 7,745 mm (L x W x H) Weight baler: approx. 33 t (main press approx. 12 t, press channel with bale clamp approx. 10 t) Additional special equipment ordered: Frequency-controlled main drive, 2 x 45 kW, with up to 40% energy savings compared to standard 2 x 45 kW motors at the same output Manual activation/deactivation of wire tying strands to save tying wire with non-expanding materials Shear-edge ejector with 121 kN press force Wire break/end sensor monitoring, with baler shut-off in the event of wire breakage or wire end Bale slide Optical warning signal mounted on the control cabinet Condition of the baler: The entire baling system (baler and conveyor technology) is in good, immediately operational condition and has been cleaned, lubricated, and maintained weekly by the operator in accordance with the manufacturer’s specifications. Technical Data Chain Belt Conveyor: Manufacturer: Stadler Anlagenbau GmbH Type: Chain belt conveyor KF 1800 Year of manufacture: 2015 Belt speed: 0.36 m/second Length of feed belt: 7,000 mm Length of ascending belt: 14,500 mm Length of goose neck: 1,550 mm Inclination: 30° Nominal width: 1,800 mm Usable width: 1,638 mm Overall conveyor height: 7,745 mm Pit dimensions for conveyor: 11,200 x 3,000 x 1,250 mm (L x W x H) Scope of delivery: - HSM VK 8818 R-FU baler - Service platform - Bale slide - Wire deflection stations - Wire spool trolleys (without wire spools) - Stadler KF 1800 chain belt conveyor - Crosswise sliding belt conveyor - Pit cover from the feed conveyor to the pit - Second control cabinet for baler operation at the conveyor - Machine documentation in English Delivery time: The entire plant has already been dismantled and stored, and will be ready for loading shortly after payment is received. Iedpfsyz Af Esx Ab Aoib We would be pleased if this or one of our other balers is of interest to you. Your service team, Mertens & Frowein GmbH

Stanje: dober (rabljeno), Leto izdelave: 2011, obratovalne ure: 40.000 h, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 88 t, širina odprtine za polnjenje: 990 mm, dolžina polnilne odprtine: 1.800 mm, dolžina bale: 1.200 mm, širina bale: 1.100 mm, višina bale: 750 mm, skupna masa: 23.000 kg, kapaciteta rezervoarja za olje: 2.000 l, moč: 90 kW (122,37 KM), volumenski pretok: 643 m³/h, Good day, We hereby offer, without obligation, a used baling press including conveyor belt, wire tying stations, and bale chute, manufactured by HSM GmbH + Co. KG, model VK 8818 FU. Iiodpfjymmtcjx Ab Aeb The following technical data have been taken from the manufacturer's operating manual and brochures, for which we do not assume any liability for accuracy or completeness. Manufacturer: HSM GmbH + Co. KG, Germany Model: VK 8818 FU Year of manufacture: 2011 Operating hours: approx. 40,000 hours (as of July 2025) Main press force: 880 kN Specific pressing force: 107 N/cm² Feed opening dimensions: 990 x 1,800 mm Theoretical throughput: 643 m³/hour Bale dimensions: 1,100 x 750 mm, length variable from 600 up to 2,000 mm Drive power: 2 x 45 kW, frequency controlled Tying: 5-fold horizontal, fully automatic Press dimensions (assembled): 12,130 x 4,800 x 3,270 mm (L x W x H) Installation dimensions including conveyor system: 14,000 x 23,000 x 7,745 mm (L x W x H) Note: The machine was used at a recycling facility for compacting paper, cardboard, and film. The press is in good condition and will be replaced by a new, larger press in May/June 2026. Until then, the machine can be viewed in operation with material feed. We would be pleased if this press is of interest to you. Your service team, Mertens & Frowein GmbH

Leto izdelave: 2008, stanje: dober (rabljeno), Machine type: Finishing machine Iodpfx Ajlrt Sasb Asib Manufacturer: Supfina Grieshaber GmbH & Co. KG Model: 622/1 Serial number: 760001 Year of manufacture: 2008 Available immediately Ex location, for self-dismantling Dismantling and loading services available on request

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, vrsta vhodnega toka: trifazni, volumenski pretok: 90 m³/h, skupna širina: 2.950 mm, skupna dolžina: 3.800 mm, skupna višina: 2.300 mm, poraba energije: 1 kWh, Innovative band filter technology for maximum process reliability The RESY KBF compact band filter system represents a pioneering advancement in the field of automatic band filter units. Key advantage: There is no relative movement between carrying belt, filter fleece, disc wheels, and sludge scrapers. This ensures that the filter fleece is not damaged, even when processing large quantities of chips or solid particles. Compared to conventional flat-bed filters, the compact band filter offers: - Up to 80% less space requirement - Higher degree of purity - Consistent filtration performance - Reduced maintenance intervals - Maximum process stability Operating principle of the compact band filter A robust, endless metal-link belt is half-shell-shaped guided over two rotating disc wheels and driven by a geared motor. The filter fleece is positioned between the belt and the wheels. The contaminated medium is fed via a central inlet pipe directly into the completely sealed filtration tank. In the calm zone, solid particles settle and form a filter cake. This filter cake acts as an additional natural filter layer and continuously improves separation efficiency. As contamination increases, the liquid level rises—depending on the design, up to 500 mm. When a predefined maximum value is reached, the system automatically advances fresh filter fleece without interrupting the filtration process. At the same time, the following are reliably discharged: - Used fleece - Sludge - Chips - Coarse particles An integrated sensor continuously monitors the diameter of the fleece roll and signals in time when a roll change is necessary. The entire filtration process is fully automatic and energy-efficient. Custom-tailored configuration for your application Actual filtration performance depends on several process parameters, including: - Throughput volume - Medium (e.g., emulsion, oil, process water) - Inlet concentration - Desired filtration fineness - Particle size and material properties The compact band filter is configured individually according to your technical requirements. Typical applications - Metalworking Iodpfx Aey Evxyeb Aeib - Grinding processes - Turning and milling operations - Coolant preparation - Process water treatment - Chip and sludge filtration

Stanje: novo, Leto izdelave: 2025, Blasting container for blasting glass beads and ceramic balls, equipped with a drum magnetic separator and stainless steel grating floor. Internal dimensions: L=5850 mm, W=2300 mm. Side door opens for easy loading with a forklift. Isdpfx Abeg S Rt Te Aoib

Stanje: delavnici obnovljeno (rabljeno), Horizontal baler DIXI 60 SLD Year of manufacture: 2014–2016 Semi-automatic 60-ton press system for efficient volume reduction of residual materials (recyclables) in industrial and commercial sectors: - Cardboard - Tetra Pak/cartons - Films - PET bottles - Foam materials - Insulation panels - and other compressible materials. Machine dimensions (L x H x W) approx. mm: 4150 (5080) x 1725 x 2035 Feed opening (W x H, standard) mm: 990 x 1110 Machine weight approx. kg: 5,420 Pressing force max. kN: 60 t / 600 kN Press cycle (average) approx. s: 47 Ijdjnfux Uopfx Ab Asib Bale size (W x H x L) approx. mm: 800 x 1100 x 1200 Bale weight (depending on material) approx. kg: 370–410 Tying: manual Number of ties: 3, secured with wire and quick-release loops Drive power: 7.5 kW; 400V/32A The presses have been tested and are fully functional, supplied with fresh UVV inspection and DGUV Regulation 3 test certificate. The Dixi 60 SLD is immediately ready for use. On request, the Dixi 60 SLD can be completely overhauled for an additional charge. This includes: - Replacement of all hydraulic hoses - Hydraulic oil change - Inspection of the hydraulic unit - Inspection and, if necessary, replacement of hydraulic cylinders Net price plus VAT and possible transport.

Stanje: delavnici obnovljeno (rabljeno), moč: 11 kW (14,96 KM), obratovalna teža: 8.000 kg, Horizontal baling press DIXI 80 SLD Year of manufacture: 2018-2021 Semi-automatic 80-ton press system for economical volume reduction of residual materials (recyclables) in industrial and commercial applications: - Cardboard - Tetra Pak packaging - Foils - PET bottles - Foam material - Insulation panels - And other compressible materials Machine dimensions (L x H x W) approx. mm: 4,320 x 1,830 x 2,154 Feed opening (W x H, standard) mm: 1,040 x 1,110 Machine weight approx. kg: 8,000 Max. pressing force: 80 t / 800 kN Cycle time (average) approx. s: 35 Bale size (W x H x L) approx. mm: 1,120 x 1,120 x 1,200 Bale weight (depending on material) approx. kg: 550 - 650 Tying: manual Number of ties: 4, using wire with Quicklink wire system Drive power: 11 kW; 400V/32A The presses are tested and fully operational, supplied with a current UVV inspection and certified according to DGUV Regulation 3. The Dixi 80 SLD is immediately ready for operation. Iodeqa Dq Dopfx Ab Asib Upon request and for an additional charge, the Dixi 80 SLD can be completely overhauled. This includes: - Replacing all hydraulic hoses - Changing hydraulic oil - Inspecting the hydraulic unit - Checking and, if necessary, replacing the hydraulic cylinders Net price plus VAT; transport available on request. Operating manual is available and supplied as both PDF and printed copy.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2021, obratovalne ure: 9.500 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 3284, Standardna različica RUF Lignum R2 z izstopnimi kanali, el. motor 22 kW, velikost briket 150x60 mm, zmogljivost do 500 kg/h Iiedpfxoyyl Sro Ab Aob

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2006, Funkcionalnost: popolnoma funkcionalen, Fully automatic machine with pneumatic control and PLC system for the production of small diameter rolls Iiodpfxov Dutus Ab Ajb Specification: Wrapping material: parchment, baking paper Paper thickness: 10 - 70 g/m² Production speed: 500 rolls of 15 m per hour Working width: 200 mm - 420 mm Maximum main roll diameter: 1000 mm Maximum finished roll diameter: 60 mm Electrical connection: 400 V, 50 Hz Power consumption: 6 kVA Air consumption: 200-400 l/min at 6 bar Weight: 1200 kg

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, vhodna napetost: 230 V, vrsta vhodnega toka: Klimatska naprava, laserska moč: 30 W, vrsta hlajenja: zrak, skupna širina: 400 mm, skupna višina: 690 mm, skupna dolžina: 600 mm, skupna masa: 45 kg, vrsta nastavitve višine: električni, dolžina območja skeniranja: 110 mm, širina območja skeniranja: 110 mm, potrebna višina: 900 mm, valovna dolžina laserja: 1.064 nm, temperatura okolja (min.): 15 °C, okoljska temperatura (maks.): 35 °C, vhodna frekvenca: 50 Hz, vrsta laserja: vlakenski laser, The LAS 22 is a compact tabletop unit with a small working area, making it ideally suited for small parts or, for example, nameplates. Due to its compact design, the machine is very practical and can be used virtually anywhere. The device is very easy to operate and requires no programming knowledge. With the powerful laser software, texts, numbers, 2D codes, QR codes, and logos can be created in just a few clicks, without extensive programming skills. The software automatically increments serial and item numbers after initial setup. In addition, the software can retrieve data (such as variable information like drawing numbers, project names, etc.) from existing tables and automatically transfer it to predefined fields. The use of a handheld scanner is also possible. A laptop with a Windows operating system and laser software comes as standard. Optionally, the LAS 22 laser model can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. - 30-watt fiber laser (optional: 20 watts, 50 watts) - Laser class 1 - Wavelength 1064 nm - Marking field size 110 x 110 mm - Marking software EZCAD in German/English - Pilot laser (easy preview/contour preview) - Focus finder (easy focusing) - Max. component height approx. 95 mm - Grid bores for fixtures - Clamping area 310 x 190 mm - Electrically adjustable Z-axis - Electric door with pinch protection - Optional: Fume extraction (incl. activated carbon filter) - Welded construction made of sheet steel Isdpfx Aoy I Nbmjb Asib - 230 V connection - Air-cooled - Laptop with Windows operating system (German or English) - Dimensions (W x D x H): 600 x 400 x 690 mm - Weight: approx. 45 kg - Low operating costs

Leto izdelave: 2026, stanje: novo, Funkcionalnost: popolnoma funkcionalen, vhodna napetost: 230 V, vhodna frekvenca: 50 Hz, laserska moč: 20 W, valovna dolžina laserja: 1.064 nm, dolžina območja skeniranja: 110 mm, širina območja skeniranja: 110 mm, vrsta hlajenja: zrak, vrsta vhodnega toka: Klimatska naprava, vrsta laserja: vlakenski laser, The LAS 22 is a compact tabletop device with a small working area, ideally suited for small parts. Thanks to its compact design, the unit is highly practical and can be used anywhere. The device is very easy to operate without any programming knowledge. With the powerful laser software, texts, numbers, 2D codes, QR codes, and logos can be created and marked with just a few clicks and minimal programming knowledge. The software automatically increments serial and article numbers after prior configuration. Additionally, the software can read data (variable information such as drawing numbers, project names, etc.) from existing tables and automatically transfer them into predefined fields. The use of a handheld scanner is also possible. A laptop with Windows operating system and laser software is included as standard. Optionally, the LAS 22 laser model can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. - Fiber laser 20 watt (optional: 30 watt, 50 watt) - Laser class 1 Isdjy Emthopfx Ab Aoib - Wavelength 1064nm - Marking field size 110 x 110 mm - Marking software EZCAD in German / English - Pilot laser (simple preview/contour preview) - Focus finder (easy focusing) - Max. component height approx. 95 mm - Grid bores for fixtures - Clamping area 310 x 190 mm - Electrically adjustable Z-axis - Electric door with anti-trap safety stop - Optional: extraction unit (incl. activated carbon filter) - Optional: 3-jaw chuck for marking cylindrical parts - Welded steel sheet construction - Connection 230V - Air cooled - Laptop with Windows operating system (German or English) - Dimensions (LxWxH): 600 x 400 x 690 mm - Weight: approx. 45 kg

Leto izdelave: 2026, stanje: novo, Funkcionalnost: popolnoma funkcionalen, vhodna napetost: 230 V, vhodna frekvenca: 50 Hz, laserska moč: 30 W, valovna dolžina laserja: 1.064 nm, dolžina območja skeniranja: 110 mm, širina območja skeniranja: 110 mm, vrsta hlajenja: zrak, vrsta vhodnega toka: Klimatska naprava, vrsta laserja: vlakenski laser, The LAS 22 is a compact tabletop device with a small working area, ideally suited for small components. Due to its compact design, the system is highly practical and can be used anywhere. The device is very easy to operate even without programming skills. Iedpfxewkpxkj Ab Aoib With the powerful laser software, texts, numbers, 2D codes, QR codes, and logos can be created with just a few clicks and without extensive programming knowledge. Serial and item numbers are automatically incremented by the software after prior configuration. Additionally, the software can read data (variable information such as drawing numbers, project names, etc.) from existing tables and automatically transfer them to predefined fields. The use of a handheld scanner is also possible. Standard equipment includes a laptop with Windows operating system and laser software. Optionally, the LAS 22 laser model can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. - Fiber laser 30 watt (optionally: 20 watt) - Laser class 1 - Wavelength 1064nm - Marking field size 110 x 110 mm - Marking software EZCAD in German / English - Pilot laser (simple preview/contour preview) - Focus finder (easy focusing) - Max. component height approx. 95 mm - Grid holes for fixtures - Clamping surface 310 x 190 mm - Electrically adjustable Z-axis - Electric door with pinch protection stop - Optional: extraction system (incl. activated carbon filter) - Optional: 3-jaw chuck for marking cylindrical parts - Welded steel sheet construction - Connection 230V - Air-cooled - Laptop with Windows operating system (German or English) - Dimensions (LxWxH): 600 x 400 x 690 mm - Weight: approx. 45 kg

Leto izdelave: 2026, stanje: novo, Funkcionalnost: popolnoma funkcionalen, vhodna napetost: 230 V, vhodna frekvenca: 50 Hz, laserska moč: 20 W, valovna dolžina laserja: 1.064 nm, dolžina območja skeniranja: 110 mm, širina območja skeniranja: 110 mm, vrsta vhodnega toka: Klimatska naprava, vrsta laserja: vlakenski laser, The LAS 22 is a compact tabletop unit with a small working area, ideally suited for small parts or, for example, nameplates. Thanks to its compact design, the system is highly practical and can be used anywhere. The device is very easy to operate without any programming knowledge. With the powerful laser software, texts, numbers, 2D codes, QR codes, and logos can be created with just a few clicks, without the need for extensive programming expertise. Serial and article numbers can be automatically incremented by the software after a simple initial setup. Furthermore, the software can import data (variable information such as drawing numbers, project names, etc.) directly from existing tables and automatically transfer it into predefined fields. The use of a handheld scanner is also possible. Standard equipment includes a laptop with a Windows operating system and laser software. Optionally, the LAS 22 laser model can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. - Fiber laser 20 Watt (optional: 30 Watt) - Laser class 1 - Wavelength 1064nm - Marking area size 110 x 110 mm - Marking software EZCAD in German / English - Pilot laser (easy preview/contour preview) - Focus finder (simple focusing) - Max. component height approx. 95 mm - Grid holes for fixtures - Clamping surface 310 x 190 mm - Electrically adjustable Z-axis - Electric door with anti-pinch protection - Optional: extraction system (incl. activated carbon filter) - Welded steel sheet construction - Power supply 230V - Air cooled - Laptop with Windows operating system (German or English) - Dimensions: W x D x H 600 x 400 x 690 mm - Weight: approx. 45 kg - Low operating costs Iisdpfx Abew Et Ilo Ajb

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Stroj z nizko hitrostjo Širina reza - 150 mm Moč motorja - 2,2 kW Hitrost rotorja 200 obr/min Število nožev rotorja - 9 kosov Iodeyf I N Ajpfx Ab Aeib Število nožev statorja - 2 kosa Na voljo 6 kosov, brezhibno stanje Kapaciteta do 25 kg/h Cena 1000 EUR na kos

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: DMG3 size 22, skupna masa: 31.100 kg, prenosno razmerje: 6.943, Hlavní převodovka FLENDER, DMG3 velikost 22 i = 6.943 PM = 4 000 kW n1 = 993 ot./min n2 = 143 ot./min Počet zubů věnce = 292 n mlýna = 15,1 ot./min Provozní součinitel dle ISO 6336 = 2,3 Hřídel d1 (levá): Ø 170 n6 x 250 dlouhá G1 = 790 mm se 2 pery dle DIN 6885-1, Hřídel d1 (pravá): Ø 170 n6 x 250 dlouhá G1 = 790 mm se 2 pery dle DIN 6885-1, Těsnění obou hřídelí d1 s labyrintovým těsněním Ijdpfx Abjyuct Uj Aoib Chlazení a tlakové mazání s externím olejovým chladičem OWTS 10 (samostatná položka) Hřídel d1 levá – osazena částí 2 spojky UZWN 460 Hřídel d1 pravá – osazena částí 2 spojky RWN 800 Náplň oleje není součástí dodávky Včetně: - Mazací systém OWTS 10 - Potrubí - Hlavní vstupní spojka RUPEX RWN 800 - Sada vymezovacích vložek s nástroji pro ustavení - Sada kotevních šroubů - Pomocná převodovka FLENDER H3 SH velikost 11 - Pomocný motor tbd225M - Pomocná vstupní spojka FLUDEX FAR 395x224 - Pomocná výstupní spojka UZWN kompakt 460 - Klínový řemenový kotouč - Klínové řemeny - Odstředivá brzda FB 2x208 - Brzdový buben TE - Zadržovací brzda TE 315/800/60 - Základový rám - Nástroj pro předepínání

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, laserska moč: 30 W, vrsta hlajenja: zrak, skupna masa: 45 kg, vrsta nastavitve višine: električni, dolžina območja skeniranja: 110 mm, širina območja skeniranja: 110 mm, valovna dolžina laserja: 1.064 nm, The LAS 22 is a compact desktop unit with a small working area, ideal for marking small components. Thanks to its compact design, the system is extremely user-friendly and can be used virtually anywhere. The universally applicable LAS 22 laser marking system from Systemtechnik Hölzer GmbH is suitable for a very wide range of marking applications. With the integrated fiber laser, you can mark almost any material, such as steel, carbide, aluminum, and plastics. Depending on requirements, the system can be equipped with a 20 or 30-watt fiber laser. In many industries, laser marking is essential for permanent markings. The powerful laser software allows you to create texts, numbers, 2D codes, QR codes, and logos with just a few clicks, without requiring extensive programming knowledge. The software can automatically increment serial and article numbers after initial configuration. Moreover, the software can read data (variable information such as drawing numbers, project names, etc.) from existing tables and automatically transfer it to predefined fields. Using a hand scanner is also possible. Iiedpeuy H Nqsfx Ab Aeb Standard equipment includes a laptop with Windows operating system and laser software. Optionally, the LAS 22 laser model can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. - Fiber laser 30 watt (optional: 20 watt) - Laser class 1 - Wavelength: 1064 nm - Marking field size: 110 x 110 mm - Marking software EZCAD in German / English - Pilot laser (easy preview, contour preview) - Focus finder (simple focusing) - Max. workpiece height approx. 95 mm - Grid holes for fixtures - Clamping area: 310 x 190 mm - Electrically adjustable Z-axis - Electric door with pinch protection stop - Optional: extraction system (incl. activated carbon filter) - Welded steel sheet construction - Connection: 230 V - Air-cooled - Laptop with Windows OS (German or English) - Dimensions (LxWxH): 600 x 400 x 690 mm - Weight: approx. 45 kg

Stanje: novo, Leto izdelave: 2024, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: HAW07.5-2-22-T96, skupna masa: 100 kg, skupna dolžina: 600 mm, skupna širina: 400 mm, skupna višina: 900 mm, vhodna napetost: 400 V, vrsta vhodnega toka: Klimatska naprava, vhodna frekvenca: 50 Hz, moč: 7,5 kW (10,20 KM), obratovalni tlak: 250 letvica, Oprema: hidravlika, Hydraulic power units from 1.1 to 22 kW output ⦁ Drive types: electric motor, petrol engine, diesel engine, or PTO-driven ⦁ Hydraulic oil tank: 36L, 96L, 144L, 250L, or custom-made to customer specifications ⦁ Hydraulic pumps: gear pumps or axial piston pumps Iedpfot U Uiaox Ab Aeib ⦁ Additional components such as valves and control technology ⦁ Tank capacity: 36L, 96L, 144L, 250L, or custom design according to customer drawing

Stanje: dober (rabljeno), Leto izdelave: 2005, Push-Through Furnace System - Pusher (PUS1), Manufacturer: Ipsen International GmbH, Model: PP-2-65x65x65-18-G, Serial No.: AN 10.1595-01, Year of Manufacture: 2005, Gas/Natural Gas/Nitrogen/Methanol, 414 kW, 296 kVA comprising: Two-Chamber Pre-Washing Machine, Model WPSSB-65x65x65-E, 302 A, 199 kVA, electric, Washing tank 2 m³, Rinsing tank 2 m³, 60-80 °C Push-Through Preheating Furnace, Model DL 65x65x65 4-G, 25 A, 9.5 kVA, natural gas fired, 80-100 mbar, 350-500 °C Push-Through Gas Carburizing Furnace (Double Lane), Model PP-2 65x65x65-18-G, natural gas fired, 86 A, 29.6 kVA, 10 kWh/m³, 80-100 mbar, 860-950 °C, 140 pcs per batch, 695 kg/h Oil Quenching Bath (Hardening Oil), Model QO-65x65x65-E, 161.5 A, 93.1 kVA, electric, Air cooling, 6 m³ bath volume, max. 120 °C, 60-80 °C operating temperature Two-Chamber Post-Washing Machine, Iedpfx Absyabxys Aoib Model WPSSB-65x65x65-E, 302 A, 199 kVA, electric, Washing tank 2 m³, Rinsing tank 2 m³, 60-80 °C Push-Through Tempering Furnace, Model DL-65x65x65-6-E, 126.8 A, 84 kVA, electric, max. furnace temperature 300 °C, 150-240 °C operating temperature Batch Transport System, Measuring, Switching and Control Cabinet with Conti-Control system, Model CO/CO2-2 Batch Data: Case hardening for gearbox components 650 mm x 650 mm x 650 mm, max. 280 kg, Batch transport height 800/2,200 mm

Stanje: rabljeno, Technical Details: X-travel: approx. 1000 mm y-travel: 400 mm z-travel: 420 mm Control: Siemens Sinumerik 805/810 Thread cutting up to max.: M 22 Drilling capacity in St 60 - through drilling: 25 mm Milling range: performance in St 60: 150 mm Saw stroke: approx. 55 mm Spindle speed range - stepless: 20-6000 rpm Operating hours: manual 26,180 h Tool turret: 12 stations Tool holder: SK 40 Total power requirement: 18 kVA Machine weight approx.: 5.0 t Machine dimensions LxWxH: 2.9 x 2.5 x 2.8 m Transport dimensions (machine): 2.4 x 2.6 x 2.75 m Equipment: - Special equipment/device (modular clamping system) for milling of profile materials with an automatic cut-to-length device for workpieces using a circular saw module (non-functional) - Horizontal workpiece clamping (force-fit) with vise clamping system and parallel bars (currently approx. 80 mm) - Tool changer type Chiron basket-type tool changer - Mechanical tool clamping lock, pull-in force 5000 N - Chip conveyor, make: Knoll - Loading and unloading system FMB LM RP 3000 The machine is not operational. Sale is at the indicated disposal price. Iisdpfxju Idnms Ab Aob

Leto izdelave: 2025, stanje: novo, Funkcionalnost: popolnoma funkcionalen, skupna masa: 45 kg, skupna dolžina: 600 mm, skupna širina: 400 mm, skupna višina: 690 mm, LASER - LAS 22 is a compact benchtop device with a small work area, making it ideally suited for small parts or, for example, nameplates and type tags. Its compact design makes the system highly practical and suitable for use virtually anywhere. The device is very easy to operate, with no programming knowledge required. With the powerful laser software, you can create text, numbers, 2D codes, QR codes, and logos in just a few clicks—no advanced programming skills necessary. Serial and article numbers are automatically incremented by the software after initial configuration. Additionally, the software can import variable data (such as drawing numbers, project names, etc.) from existing tables and automatically insert it into predefined fields. A handheld scanner can also be used. Standard equipment includes a laptop with a Windows operating system and laser software. Optionally, the LAS 22 laser model can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. - 20 watt fiber laser (optional: 30 watt) - Laser class 1 - Wavelength: 1064nm - Marking field size: 110 x 110 mm - Marking software: EZCAD (German / English) - Pilot laser (easy preview/contour preview) - Focus finder (simple focusing) - Max. component height: approx. 95 mm - Grid holes for fixtures Iedpfjxqhnzjx Ab Aeib - Clamping area: 310 x 190 mm - Electrically adjustable Z-axis - Electric door with anti-pinch protection - Optional: exhaust system (incl. activated carbon filter) - Welded steel sheet construction - Connection: 230V - Air-cooled - Laptop with Windows OS (German or English) - Dimensions (LxWxH): 600 x 400 x 690 mm - Weight: approx. 45 kg - Low operating costs

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Počasni drobilnik z menjalnikom Širina reza – 250 mm Moč motorja – 3 kW Hitrost rotorja – 100 obr./min Število rotorskih nožev – 20 kosov Število statorskih nožev – 2 kosa Na voljo 9 kosov, brezhibno stanje Iedpfx Abeyf I Tbs Asib Zmogljivost do 50 kg/h Cena 1.350 EUR na kos

Stanje: rabljeno, lastna masa: 4.820 kg, največja dovoljena obremenitev: 13.180 kg, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, prva registracija: 02/2018, dolžina tovornega prostora: 7.300 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 3.000 mm, prostornina tovornega prostora: 54 m³, vzmetenje: zrak, velikost pnevmatike: 235/75R17,5 ---/141K, barva: drugo, vrsta prenosa: drugo, velikost sprednje pnevmatike: 235/75R17,5 ---/141K, velikost zadnje pnevmatike: 235/75R17,5 ---/141K, voznikova kabina: drugo, emisijski razred: noben, Oprema: ABS, zavorni sistem na stisnjen zrak, Forklift bracket, -- Subject to typographical errors, mistakes and changes, sample images --, More data at: !, More details: ! Ijdpjy Rr Izsfx Ab Aoib

Leto izdelave: 1995, stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, 3 rotary knives 2 stationary knives Iiedpfx Aov Nnr Ieb Aeb Knife feed opening 220 x 180 mm Power 3 kW