Simplacutter (Cauhe) Simplacutter Iv – 1680X1160 nakup rabljenega (2.056)

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, SIMPLACUTTER (CAUHE) IV – 1680x1160 Stroj je malo rabljen, v zelo dobrem stanju Oprema: – Pnevmatska sklopka in zavora – Konzola – Ogrevana plošča – 3 načini delovanja: enojni, neprekinjen, z zamikom pri odpiranju Lhedpfx Aloyl Unxs Nef – Centralno mazanje – Dodatni varnostni ščiti – Delovno orodje – Trda pritisna plošča

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, SIMPLACUTTER (CAUHE) IV – 1680x1160 Machine in very good condition, little used, equipped with new, upgraded electronics and laser safety guard. Equipment: Lhodpfxeyl Um Ue Al Nof – Pneumatic clutch and brake – Control panel – New, upgraded electronics + laser safety protection – 3 operating modes: single, continuous, time delay on opening – Centralized lubrication system – Additional safety covers – Service tools – Hardened pressure plate

Stanje: dober (rabljeno), Simplacutter model IV 110×160 Cauhe izsekovalni stroj Stroj je popolnoma delujoč, kot nov. Izdelan v Španiji. Dimenzije okvirja: 1100×1600 mm Dimenzije lista: 1160×1680 mm Lhsdpfoywdr Ejx Al Njf Teža: 8500 kg Napajanje: 380 V Vgrajena moč: 7,5 kW Udarni pritisk: 350 t Oprema: – pnevmatska sklopka in zavora – krmilna plošča – dva okvirja – 2 načina delovanja: časovna zakasnitev, ročni – centralno mazanje – dodatne varnostne zaščite – varnostne tlačne preproge – delovna orodja – trda pločevina

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, SIMPLACUTTER (CAUHE) III – 1480x1070 The machine has seen little use and is in very good condition. Equipment: Lhodpsyl Umnjfx Al Nef – Pneumatic clutch and brake – Control panel – Quick-change (electric) chase + additional chase – 3 operating modes: single, continuous, delayed opening – Central lubrication – Additional safety guards – Operator tools – Hard pressure plate

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, SIMPLACUTTER VA (CAUHE) – 1860x1440 Stroj malo uporabljen, v zelo dobrem stanju Oprema: – Pnevmatska sklopka in zavora – Konzola – 3 načini delovanja: posamezni, neprekinjeni, z zamikom pri odpiranju – Centralno mazanje – Dodatne varnostne zaščite Ljdpfx Asyl Ulwjl Njhf – Delovna orodja – Trda pritisna plošča

Stanje: pripravljen za uporabo (rabljen), Zelo znana in zanesljiva izsekovalna stiskalnica Cauhe, format 1200x1600mm, letnik 1996, od drugega lastnika. Ljdpfxexz Ncbo Al Njhf

Stanje: dober (rabljeno), Hidravlična knjigoveška stiskalnica Lechner IV B Stroj je pripravljen za uporabo. Stiskalnica ima vgrajeno hidravlično enoto. Štiri delovne postaje. Nepogrešljiva v knjigoveznici za izdelavo knjig, blokov ipd. Ledpey E Ey Tefx Al Nehf

Stanje: zelo dobro (rabljeno), Tester električnih inštalacij priznane nemške firme Gossen Metrawatt Model PROFITEST MXTRA je namenjen profesionalnim meritvam električnih inštalacij in preverjanju varnosti. Naprava, ki jo uporabljajo električarji, serviserji in za inšpekcijske preglede inštalacij. ⸻ TEHNIČNI PODATKI Proizvajalec: Gossen Metrawatt Model: PROFITEST MXTRA Napajanje: 230 V Merilna kategorija: CAT III 600V, CAT IV 300V Profesionalni tester električnih inštalacij ⸻ KOMPLET VSEBUJE tester PROFITEST MXTRA merilni kabel adapter transportna torba Natančen komplet je prikazan na fotografijah. Lsdpfx Alsywcr Do Njhf ⸻ UPORABA meritve električnih inštalacij testi varnosti pregledi inštalacij električni servis ⸻ STANJE rabljeno vizualno v dobrem stanju

Stanje: dober (rabljeno), Simplacutter die-cutting platen, 72 x 102 cm, in good condition, available immediately. If you are interested, we will be happy to provide information about additional machines available in our facility. Lodpfjiypwaox Al Nehf You are welcome to inspect the machine at our premises by appointment.

Stanje: dober (rabljeno), Leto izdelave: 2006, Funkcionalnost: popolnoma funkcionalen, vrsta vhodnega toka: trifazni, prebijalna sila: 350 t, moč: 4 kW (5,44 KM), Equipment - Format 82x112 cm - Motorized quick-locking frame - Punching plate - Timer for opening and closing times - Flywheel brake - Pneumatic clutch with safety valve - 3 operating modes - Manual pressure adjustment via handwheel - High-quality safety systems - CE certificate Lederwi Hvspfx Al Nehf - Long-term spare parts availability - Manufacturer: cauhe-industries.com

Leto izdelave: 1992, stanje: rabljeno, Štanc stroj (Stanztiegel) Proizvajalec: Simplacutter Velikost: 82x112 Lhsdpfxexcuguj Al Njf Leto izdelave: 1992

Leto izdelave: 2007, stanje: pripravljen za uporabo (rabljen), - RABLJEN - 8-OSNI CNC STRUŽNICA Z REZKALNO GLAVO, SPODNJO REVOLVERSKO GLAVO IN KONTRA VRETENOM MAKS. PREMER VRTENJA: 660 mm MAKS. DOLŽINA STRUŽENJA: 1495 mm MAKS. PREMER STRUŽENJA: 660 mm PREMER PALICE: 65 - 65 mm VRETENO: 35-5000 vrt./min; 22 kW; 254 mm KONTRA VRETENO: 35-5000 vrt./min; 18,5 kW; 254 mm GLAVA: CAPTO C6; -30°+195°; 15-12000 vrt./min; 18,5 kW HOD OSI X: 580 mm HOD OSI X2: 150 mm HOD OSI Y: 160 mm HOD OSI Z: 1545 mm HOD OSI Z2: 1490 mm HOD OSI B: 1550 mm HITRI POMIKI X-Y-Z: 38 - 26 - 38 m/min REVOLOVERSKA GLAVA: 9 POZICIJ MAGAZIN ORODIJ: VERIŽNI TIP; 80 POZICIJ VISOKOTLAČNO HLAJENJE: 18 Bar Lhjdsyy Thzspfx Al Nef KRMILNA ENOTA: MAZATROL MATRIX TEŽA: 11800 kg SKUPNE DIMENZIJE: 5090 x 3270 x 2830 mm OPREMA: TRANSPORTER OSTRUŽKOV; PAPIRNI FILTER; NASTAVLJALEC ORODIJ

Stanje: rabljeno, prevoženi kilometri: 366.920 km, moč: 251 kW (341,26 KM), prva registracija: 03/2020, vrsta goriva: dizel, število sedežev: 29, vrsta prenosa: samodejen, emisijski razred: Euro 6, barva: bež, zavore: retarder, Oprema: ABS, elektronski program stabilnosti (ESP), klimatska naprava, parkirni grelec, Naša interna številka vozila: 1187 Solaris New Urbino IV 12 Lhsdsy E D Nmopfx Al Njf Moč: 251 kW Emisijski razred: Euro 6D Razred vozila: M3 Prva registracija: 03/2020 1. roka v Nemčiji s servisno knjigo Voith avtomatski menjalnik 1/2/3/D/N/R * 28+1 sedežev * LAWO prikazovalnik cilja spredaj/stran/zadaj s krmilno enoto * električna sončna roleta * klimatska naprava * vzvratna kamera * blokada kril nihajnih vrat * pregibna rampa * velik večnamenski prostor – invalidski voziček / otroški voziček * konvektorsko ogrevanje * 2x pregibna okna na vsaki strani * originalni kilometri * vozilo je bilo polepljeno — folija * pripravljenost za TFT zaslon Opomba: Vozilo je lahko še vedno registrirano — število prevoženih kilometrov in stanje se lahko razlikujeta. Stranka se mora sama prepričati o stanju in opremi blaga/vozila! Vse informacije brez jamstva. Pridržujemo si pravico do predprodaje. Opozarjamo na naše splošne pogoje.

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, Resonance Vibrating Screen Screen area: 1,600 x 3,600 mm with perforated sheets Mounted on a heavy, robust base frame Lhsdpfxjtpawlo Al Nef New electric drive

Stanje: rabljeno, lastna masa: 5.000 kg, največja dovoljena obremenitev: 12.000 kg, prva registracija: 07/2016, naslednji pregled (TÜV): 08/2023, skupna dolžina: 9.200 mm, skupna širina: 25.500 mm, skupna višina: 39.000 mm, vzmetenje: zrak, velikost pnevmatike: 385 / 55 R 22.5 / 6mm, velikost sprednje pnevmatike: 385 / 55 R 22.5 / 6mm, obratovalna teža: 17.000 kg,

Stanje: rabljeno, Leto izdelave: 2017, Year of manufacture: 2017 Condition: good Schulze PRETREATmaker IV Unique device for applying pre-treatment liquid before textile printing. Thanks to the large application area (40x60 cm), it is particularly suitable for DTG printers such as the M2, M3, M4, but also for machines with smaller print areas like the R-Jet, Brother GT3, Anajet, TexJet, etc. A key advantage is that no compressor is required. The machine is equipped with four independent, adjustable nozzles (allowing small-area application, e.g., for chest logo prints). Spraying time for the full 40x60 cm area is just 4.5 seconds. Fluid spray size selectable in 2 cm increments (2 – 60 cm length). Large, user-friendly LCD display. Five storable positions/settings for spray area and amount. High efficiency and productivity. No compressor required - Four independently adjustable nozzles (enables small-area spraying, ideal for chest logos) - Spray time for full 40x60 cm area: 4.5 seconds - Adjustable spray size in 2 cm increments (2 – 60 cm length) - Large, clear LCD display - 5 storable area/volume settings - High efficiency and productivity PRETREATmaker IV Ljdpsufi Uwsfx Al Nshf is a top-of-the-line device designed for professional application of pre-treatment liquid to textiles. It features an advanced electronic system for high performance and easier operation during the textile pre-treatment process. The intuitive color touchscreen interface allows easy adjustment of spray length and width, as well as quick control of spray volume. Each of the four nozzles can be activated individually for precise and economical application. This enables you to accurately set the area for applying pre-treatment solution (Dupont Artistri, Image Armor, Brother, etc.), saving a significant amount of fluid compared to manual application with a pressure/air gun. The spray area length can be adjusted in 2 cm increments via the touchscreen. Ten levels are available for regulating the volume of pre-treatment fluid applied. The PRETREATmaker IV also features an automated nozzle cleaning process (consumption approx. 12 ml/hour) to keep the nozzles clear and prevent drying or blockage. Spray area: 40 x 60 cm Spray method: Nozzles move above the internal table Table length: 80 cm Number of nozzles: 4 Dimensions: L 90 x W 72 x H 48 cm Transport dimensions: L 95 x W 80 x H 61 cm Weight: 68 kg Transport weight: 86 kg Power supply: 220/230 or 110/120 VAC (automatic switch) Power consumption: 150 W Operating pressure (pre-coating): max. 7 bar Menu: 5 languages – German, English, French, Italian, Polish Measurements: "cm" or "inch" Scope of delivery: spare nozzle, spare filter, and ultrasonic cleaner included Other features: Galvanized and powder-coated housing

Leto izdelave: 1969, stanje: dober (rabljeno), številka stroja/vozila: 1130, Saw blade diameter: 315 mm Lodpfx Asd Rxw Sel Njhf Cutting capacity at 90° (round): 90 mm Cutting capacity at 90° (rectangular): 100 x 60 mm Cutting speed: 17/34 m/min Drive motor: 380 V, 1.8/2.6 kW Space requirement: 1200 x 860 x 1850 mm Weight: 720 kg

Leto izdelave: 1979, stanje: dober (rabljeno), številka stroja/vozila: 2001, Saw blade Ø: 400 mm Cutting capacity at 90° (round): 95 x 240 mm Cutting capacity at 45° mitre (round): 75 x 180 mm Lodpfofnrw Ssx Al Nehf Saw blade speed: 10.5 / 21 rpm Drive motor: 380 V, 2.6/3.2 kW Space requirement: 1500 x 1100 x 2150 mm Weight: 630 kg

Stanje: rabljeno,

Stanje: rabljeno, prevoženi kilometri: 1.080.000 km, prva registracija: 01/2015, vrsta goriva: dizel, največja dovoljena obremenitev: 16.900 kg, skupna masa: 26.000 kg, konfiguracija osi: 6x2, vrsta prenosa: samodejen, emisijski razred: Euro 6, vzmetenje: zrak, število sedežev: 2, Kabina Giga Space 250 – Vanjska transparentna sunčana vizira – Električni pomoćni klima uređaj – Automatski klima uređaj – Široki gornji ležaj, luksuzni donji ležaj – Grijač tople vode za kabinu – Multifunkcionalno suvozačko sjedalo – Pneumatsko vozačko sjedalo, comfort – Aerodinamički krov – Električno podizni krov – Active Brake Assist – Attention Assist – Elektronska kontrola stabilnosti (ESP) – Sustav protiv zanošenja/pomoć za održavanje trake – Tempomat – Traffic Sign Assist – 12-stupanjski mjenjač G 211-12/14,93-1,0 – Automatizirani mjenjač Mercedes PowerShift 3 – Mjenjač s integriranim GPS-om za smanjenu potrošnju (PPC) – Ojačana motorna kočnica visokih performansi – Paletni sustav za mobilne kontejnere 780 – CIJENA UKLJUČUJE BIĆU I MOBILNE KONTEJNERE IZ 2021. s podizanjem/spuštanjem i pokrivanjem/otkrivanjem Lhsdpfx Aljx Nrt Ie Nef

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2011, proizvajalec krmilnikov: MAZATROL, model krmilnika: Matrix, This 5-axis Mazak Integrex 100 IV ST was manufactured in 2011. It features a main spindle with a 6-inch hydraulic chuck, a maximum speed of 4,000 rpm, and a power output of 30 kW. The second spindle offers matching capabilities. Its milling spindle reaches up to 20,000 rpm. Equipped with a high-speed ATC with a standard capacity of 20 tools, expandable to 120. With its robust construction and MAZATROL MATRIX CNC control, it is ideal for complete machining in a single setup. Contact us for further information on this machine. Machine Advantages Quality Advantages • 2 units available Technical Advantages • Chuck type: 6" hydraulic chuck with maximum bar capacity / spindle speed: 4,000 rpm max / power: 30 kW / 22 kW continuous / max torque: 500 Nm / spindle nose: A2-8 / acceleration time: 5.1 seconds • Type: 6" hydraulic chuck, max. speed: 4,000 rpm, max. power: 26 kW / 22 kW continuous, max. torque: 724 Nm, spindle nose: A2-8, acceleration time: 2.7 seconds • Max. spindle speed: up to 20,000 rpm (optional) / max. power: 18.5 kW / max. torque: 119 Nm / taper: KM63, Capto C6, BT40 • X-axis: 410 mm / Y-axis: ±70 mm (total 140 mm) / Z-axis: 805 mm / B-axis (milling head): 210° rotation / C-axis (spindle): 0.0001° resolution (full contouring) • Max turning diameter: approx. ø545 mm / max turning length: approx. 600 mm • Tool capacity: 20 tools standard, expandable to 120 / changer type: high-speed cam-driven system Lhodpfx Alsyalpis Njf • Heavy-duty construction with linear guides, “done in one” multitasking concept for single setup machining / CNC control: Mazatrol Matrix with 3D simulation / intelligent heat shield for automatic thermal compensation

Stanje: rabljeno, Leto izdelave: 1998, Krmiljenje Siemens Sinumerik Premer brusnega koluta: 900 mm Širina brusnega koluta: 20-80 mm Po naši oceni je stroj v dobrem rabljenem stanju. Na voljo sta 2 stroja. Dodatna oprema, prikazana orodja in vpenjalna sredstva so vključena v obseg dobave le, če je to navedeno v dodatnih informacijah. Ljdexuv Udjpfx Al Nehf Pridržujemo si pravico do sprememb in napak v tehničnih podatkih ter predhodne prodaje!

Stanje: rabljeno, Leto izdelave: 2008, x-axis travel: 410 mm y-axis travel: 570 mm z-axis travel: 140 mm Control: Mazatrol Matrix Maximum machining diameter: 545 mm Maximum machining length: 519 mm Main spindle speed: 35 - 6,000 rpm Tool holder: Capto C6 Rapid traverse (X/Y/Z axes): 30/26/33 m/min Performance / Capacity: Maximum swing: 545 mm Maximum machining diameter: 545 mm Maximum outside diameter for bar work: 51 mm Maximum machining length: 519 mm Maximum workpiece weight: - Chuck work: 150 kg - Bar work: 200 kg Main Spindle: Lodsyt R Idopfx Al Nshf Spindle speed: 35-6,000 rpm Spindle bore diameter: 61 mm Maximum torque: 161 Nm Tailstock: Rapid traverse: 8 m/min Travel range (engaged/retracted): 434/281 mm Milling Head: Type: Single spindle with ATC Tool shank type: Capto C6 Tool dimensions: External turning tool: 20 mm Internal turning tool: 32 mm Milling tool: Max. 90 mm diameter x 200 mm length Milling spindle speed: 15-12,000 rpm Equipment/Accessories: -Chip conveyor -Mist extraction -Tools -Documentation

Stanje: novo, Leto izdelave: 2025, Dimensions (L/W/H): 1600 x 840 x 720 mm Weight: 210 kg Total power requirement: 5.6 kW Extraction system: DUSTMAX IV - Maximum air flow rate: 5200 m³/h - Extraction connection diameter: 1 x 180 mm Lhjdpfx Aevz Ehqsl Nsf - Extraction connection diameter with manifold: 4 x 100 mm - Filter surface area: 9.1 m² - Chip bag capacity: 760 l - Sound pressure level: 80 dB - Motor power: 5.6 kW - Connection: 400V / 50 Hz - Dimensions (L=2708 mm, W=580 mm, H=2355 mm) - Transport dimensions (L=1600 mm, W=840 mm, H=720 mm) - Weight: 210 kg

Stanje: rabljeno, največja dovoljena obremenitev: 11.540 kg, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, prva registracija: 06/2013, Oprema: ABS, dvižna zadnja plošča, We are very pleased that our offer has attracted your interest and we can already assure you that you will be able to purchase a good and reasonably priced vehicle with a fully traceable service history from our company! GERMAN VEHICLE REGISTRATION / CUSTOMS SERVICE We organize your vehicle registration, export documents / EUR 1 certificate, and manufacturer’s declaration for export. FINANCING On request, we are happy to provide you with a LEASING, HIRE PURCHASE, or FINANCING OFFER. SERVICE TÜV roadworthiness inspection / UVV load handling device inspection / LGS safety check / tachograph inspection / installation of OBU devices and servicing through our AUTHORIZED BRAND WORKSHOP. TOLL / ROAD CHARGES Toll registration can be completed on site. Ledpfxjyw D Sxo Al Njhf TRAVEL INFORMATION / DISTANCES Wittlich train station – 500 m Frankfurt Airport – 150 km Frankfurt-Hahn Airport – 40 km Luxembourg Airport – 75 km Sale is made in accordance with our general terms and conditions. The information provided online serves as non-binding descriptions and does not constitute guaranteed characteristics. The seller is not liable for typographical or data transmission errors. VEHICLE LOCATION: Dr. Oetker Str. 22 / 54516 WITTLICH-Wengerohr.