Sicmi Pcl 40 A nakup rabljenega (90.687)

Stanje: novo, Condition: New Delivery time: approx. 4 months from order placement Country of origin: Italy Price: €35,400 Leasing rate: €676.14 Pressing force: 40 t Stroke: 500 mm Ram: 700 x 350 mm Table: 700 x 500 mm Installation height: 500 mm Throat depth: 250 mm Rapid traverse: 26 mm/s Working speed: 9 mm/s Motor: 4 kW Length: 1500 mm Width: 1000 mm Height: 2500 mm Nsdpfx Ajynm Hrjgxola Weight: 1,500 kg 2-point round guide Table and ram with T-slots Two-hand operation Siemens PLC Manometer Operating manual Optional equipment: 4-point round guide €1,900 Light curtain €7,300 Siemens control for programming stroke and pressing time €4,000 Siemens touchscreen control, 50 programs storable, for programming: - Up-stroke and down-stroke rates - Dwell time at bottom dead center - Decompression time - Working pressure adjustment - Piece counter - Press stop in upward and downward motion - Settings for manual and automatic operation - Alarm and fault management €9,000 Hour counter €400 Piece counter €400 Decompression valve €700 Oil cooler with decompression valve €3,700 Pressure switch €900

Stanje: novo, Leto izdelave: 2024, Stanje: novo Letnik izdelave: 2024 Številka zaloge: 7305 Dobavni rok: takoj, možnost predprodaje Država izvora: Italija Cena: 46.400 € Leasing obrok: 886,24 € Na zalogi: 1 Tlačna moč: 100 t Hod: 500 mm Bat: 700 x 350 mm Miza: 800 x 600 mm Vgradna višina: 500 mm Iztez: 300 mm Hitri pomik: 25 mm/s Delovna hitrost: 4 mm/s Motor: 4 kW Dolžina: 1900 mm Širina: 1200 mm Višina: 2600 mm Teža: 2100 kg Dvojno okroglo vodilo Miza in bat z T-utorom Nedpfx Agswiry Ijxola Dvoročno upravljanje Siemens PLC Manometer Navodila za uporabo Vključno s tlačnim stikalom

Stanje: novo, Condition: New Delivery time: approx. 4 months from order Country of origin: Italy Price: €120,000 Leasing rate: €2,268 Pressing force: 300 t Stroke: 500 mm Ram: 1000 x 500 mm Table: 1200 x 800 mm Nlodpfx Agoynm H Ejxsa Installation height: 600 mm Throat depth: 400 mm Rapid traverse: 22 mm/s Working speed: 2 mm/s Motor: 7.5 kW Length: 2300 mm Width: 1500 mm Height: 3100 mm Weight: 11,200 kg 4-fold round guidance Table and ram with T-slots Two-hand operation Siemens PLC Pressure gauge Operating manual Light barrier Price: on request Siemens control unit for programming the stroke and pressing time Price: on request Siemens touchscreen control, 50 programs storable, programmable for: - Upstroke and downstroke ratio - Dwell time at bottom dead centre - Decompression time - Working pressure adjustment - Piece counter - Prestop in upstroke and downstroke - Configuration for manual and automatic operation - Alarm and anomaly management Price: on request Hour counter Price: on request Piece counter Price: on request Decompression valve Price: on request Oil cooler with decompression valve Price: on request Pressure switch Price: on request

Stanje: novo, Condition: New Delivery time: approx. 4 months from order Country of origin: Italy Price: €82,000 Leasing rate: €1,549.80 Pressing force: 200 t Stroke: 500 mm Ram: 870 x 500 mm Table: 1000 x 600 mm Installation height: 500 mm Throat depth: 300 mm Rapid traverse: 21 mm/s Working speed: 3 mm/s Motor: 7.5 kW Length: 2300 mm Width: 1500 mm Height: 3000 mm Weight: 8,200 kg Double round guide Table and ram with T-slots Two-hand control Siemens PLC Pressure gauge Operating manual OPTIONS: Light barrier Price upon request Siemens control for stroke and pressing time programming Price upon request Siemens touchscreen control, storage for 50 programs, for programming: - Upstroke and downstroke rates - Bottom dwell time - Decompression time - Working pressure setting - Piece counter - Press stop for upstroke and downstroke - Settings for manual and automatic operation - Alarm and fault management Price upon request Hour counter Price upon request Piece counter Price upon request Decompression valve Price upon request Oil cooler with decompression valve Price upon request Nlsdpfxsynm Hxs Agxoa Pressure switch Price upon request

Stanje: novo, Condition: New Delivery time: approx. 4 months from order Country of origin: Italy Price: €38,200 Leasing rate: €729.62 Pressing force: 70 tons Stroke: 500 mm Ram: 700 x 350 mm Table: 700 x 500 mm Installation height: 500 mm Throat depth: 250 mm Rapid traverse: 24 mm/s Working speed: 5 mm/s Motor: 4 kW Length: 1500 mm Width: 1000 mm Height: 2500 mm Weight: 2100 kg 2-point round guide Table and ram with T-slots Two-hand operation Siemens PLC Pressure gauge Operating manual 4-point round guide Price on request Nsdjynm Hlspfx Agxola Light barrier Price on request Siemens control for programming the stroke and pressing time Price on request Siemens touchscreen control, capacity for 50 programs, for programming: - Upstroke and downstroke ratio - Dwell time at bottom dead center - Decompression time - Working pressure setting - Piece counter - Prestop in up and down movement - Setting for manual and automatic operation - Management of alarms and faults Price on request Hour counter Price on request Piece counter Price on request Decompression valve Price on request Oil cooler with decompression valve Price on request Pressure switch Price on request

Stanje: novo, Condition: new Delivery time: approx. 4 months from order Country of origin: Italy Price: €62,500 Lease rate: €1,181.25 Press force: 150 tons Stroke: 500 mm Ram: 800 x 400 mm Table: 900 x 600 mm Installation height: 500 mm Throat depth: 300 mm Rapid traverse: 20 mm/s Working speed: 3 mm/s Motor: 4 kW Length: 2,200 mm Width: 1,500 mm Height: 3,000 mm Weight: 5,500 kg 2-point round guide Table and ram with T-slots Two-hand operation Siemens PLC Pressure gauge Operating manual Optional equipment (prices on request): - 4-point round guide - Light barrier - Siemens control for programming stroke and pressing time - Siemens touchscreen control, stores up to 50 programs, for programming: • Upstroke and downstroke ratio • Dwell time at bottom dead center • Decompression time • Working pressure setting • Piece counter • Press stop in upstroke and downstroke • Setting for manual and automatic operation • Alarm and fault management - Hour meter - Piece counter - Decompression valve - Oil cooler with decompression valve Nodeynmqkspfx Agxsla - Pressure switch

Stanje: novo, Stanje: novo Dobava: cca. 6–8 tednov po prejemu naročila Država izvora: Italija Cena: 5.000 € Leasing obrok: 117,73 € Tlačna sila: 40 t Cilinder: fiksiran ali pomičen fiksno Vgradna višina: 900 mm Svetla razdalja med stojali: 900 mm Dolžina: 1.600 mm Širina: 700 mm Višina: 2.050 (PSS: 2.250) mm Višina mize nastavljiva z verigo in zatičem Hidravlična enota z motorjem in črpalko Nastavljiv maksimalni pritisk Manometer Oprema skladna s CE predpisi Nledoypbvqopfx Agxsa Navodila za uporabo v NEMŠČINI in ANGLEŠČINI MODELI: PSS 40 TL: 1 hitrost 4 mm/s, enoročno upravljanje z ročico 5.000,00 € PSS 40 L: 2 hitrosti 9 / 3 mm/s, enoročno upravljanje z ročico 5.800,00 € PSS 40 NC: 2 hitrosti 29 / 4 mm/s, dvoročno upravljanje z ročico in gumbom 6.100,00 € PSS 40: kot PSS 40 NC, vendar z 500 mm hoda 7.000,00 €

Stanje: novo, Stanje: novo Dobavni rok: približno 4 mesece po naročilu Država porekla: Italija Cena: 22.900 € Leasing obrok: 439,68 € Tlačna moč: 40 t Hod: 500 mm Miza: 700x500 mm Vgradna višina: 600 mm Hitri pomik: 26 mm/s Delovna hitrost: 9 mm/s Motor: 4 kW Dolžina: 1400 mm Širina: 900 mm Višina: 2200 mm Teža: 1300 kg Nlodpfx Aoynndxsgxja 2 hitrosti Nastavljiv maksimalni tlak Manometer

Stanje: novo, Stanje: novo Dobavni rok: približno 4 mesece po naročilu Država izvora: Italija Cena: 18.000 € Leasing obrok: 345,6 € Tlačna sila: 40 t Cilinder fiksen ali pomičen: fiksen Hod: 500 mm Vgradna višina: 700 mm Svetla razdalja med stebri: 900 mm Hitri pomik: 29 mm/s Delovna hitrost: 4 mm/s Dolžina: 1600 mm Širina: 1000 mm Višina: 2350 mm Teža: 790 kg 2 hitrosti Upravljanje prek ročne ročice in pritisnega gumba (dvoročno upravljanje) Nastavljiv maksimalni tlak Nodpfjypbu Hsx Agxola Manometer Oprema v skladu s CE predpisi Navodila za uporabo v NEMŠČINI in ANGLEŠČINI (Slika je simbolična)

Stanje: novo, Condition: new Delivery time: approx. 14–16 weeks from order Country of origin: Italy Price: €34,500 Leasing rate: €658.95 Press force: 100 t Cylinder: fixed or movable (fixed) Bending length: 835 mm Stroke: 500 mm Installation height: 780 mm Clear column width: 1,050 mm Rapid approach speed: 25 mm/s Approach speed (with foot pedal): 10 mm/s Working speed: 4 mm/s Table: 800 x 600 mm Upper clamping plate: 700 x 350 mm Length: 1,800 mm Width: 1,000 mm Height: 2,400 mm Nlodpoypbumefx Agxea Weight: 2,050 kg Hydraulic multi-purpose workshop press for pressing, straightening and, optionally, bending Variant A (Automatic): with two-hand control panel, limit switches for upper and lower dead center, automatic ram return, Siemens CPU Variant S (Semi-automatic): two-hand operation with manual lever and pushbutton, limit switches for upper and lower dead center Standard model for pressing and straightening tasks: table with T-slots and straightening punch OPTIONS: Bending device with tool holder, upper and lower die featuring V-openings, and two front support arms Quick-change system for bending device Siemens control system Pressure switch Heat exchanger Piece counter Timer Sheet metal supports for the rear Light barrier ALTERNATIVE: Variant S (Semi-automatic): €26,000.00

Stanje: novo, Condition: new Delivery time: approx. 14-16 weeks from order Country of origin: Italy Price: €28,000 Leasing rate: €534.80 Press force: 70 tons Nlsdpfx Asypbt Nsgxea Cylinder: fixed or movable – fixed Bending length: 1,050 mm Stroke: 500 mm Installation height: 700 mm Clear column width: 900 mm Rapid traverse: 29 mm/s Approach speed (foot pedal operation): 10 mm/s Working speed: 5 mm/s Table: 800 x 600 mm Upper clamping plate: 700 x 350 mm Length: 1,700 mm Width: 1,000 mm Height: 2,300 mm Weight: 1,400 kg Hydraulic universal workshop press for pressing and straightening, with optional bending capability Version A (Automatic): with two-hand control panel, limit switches for upper and lower dead center, automatic ram return, Siemens CPU Version S (Semi-automatic): two-hand function with hand lever and push button, limit switches for upper and lower dead center Standard model for pressing and straightening operations: table with T-slots and straightening punch OPTIONS: Bending attachment with tool holder, upper tool, lower tool with V-openings, and two front support arms Quick-change device for bending attachment Siemens control Pressure switch Heat exchanger Piece counter Timer Sheet supports for the rear side Light curtain ALTERNATIVE: Version S (Semi-automatic) €19,500.00

Stanje: novo, Stanje: novo Dobavni rok: približno 4 mesece od naročila Država izvora: Italija Cena: 63.500 € Leasing obrok: 1.200,15 € Pritisna sila: 70 t Hod: 500 mm Nedpfx Ageynnfpjxela Razmak između stubova: 900x700 mm Ugradbena visina: 600 mm Brzi hod: 25 mm/s Radna brzina: 6 mm/s Motor: 4 kW Dužina: 1140 mm Širina: 940 mm Visina: 2350 mm Vođenje na 4 stuba Vođenje klipa: okruglo Sto i klip sa T-utorima Upravljanje sa dve ruke Siemens PLC Manometar Uputstvo za upotrebu Svetlosna barijera Cena na upit Siemens touchscreen upravljanje, memorija za 50 programa, za programiranje: - Podešavanje hoda gore i dole - Vreme pauze na dnu - Vreme dekompresije - Podešavanje radnog pritiska - Brojač komada - Prestop pri kretanju na gore i dole - Podešavanje za ručni i automatski rad - Upravljanje alarmima i anomalijama Cena na upit Brojač sati rada Cena na upit Brojač komada Cena na upit Dekompresioni ventil Cena na upit Hladnjak ulja sa dekompresionim ventilom Cena na upit Prekidač pritiska Cena na upit

Stanje: novo, Stanje: novo Dobavni rok: približno 4 mesece od naročila Država izvora: Italija Cena: 103.500 € Leasing obrok: 1.956,15 € Tlačna sila: 150 ton Hod: 500 mm Površina med stebri: 1250x1000 mm Višina vgradnje: 600 mm Hitri pomik: 23 mm/s Delovna hitrost: 4 mm/s Motor: 5,5 kW Dolžina: 1520 mm Širina: 1270 mm Višina: 2500 mm Vodenje s 4 stebri Vodenje bata: okroglo Miza in bat z T-utorom Dvo-ročno upravljanje Siemens PLC Manometer Navodila za uporabo Senzor za svetlobno zaveso Cena po dogovoru Siemens zaslon na dotik, možno hraniti 50 programov, za programiranje: - Hoda gor in dol - Čas premora na dnu Njdpfx Aoynm Icjgxela - Čas dekompresije - Nastavitev delovnega pritiska - Števec kosov - Prestop pri gibanju gor in dol - Nastavitev ročnega in avtomatskega premikanja - Upravljanje alarmov in anomalij Cena po dogovoru Števec delovnih ur Cena po dogovoru Števec kosov Cena po dogovoru Dekompresijski ventil Cena po dogovoru Oljni hladilnik z dekompresijskim ventilom Cena po dogovoru Tlačno stikalo Cena po dogovoru

Stanje: novo, Zustand neu Lieferzeit ca. 4 Monate ab Auftragse Ursprungsland Italien Nledpfxjynm H Se Agxoa Preis 74.800 € Leasingrate 1.413,72 € Presskraft 100 t Hub 500 mm Fläche zwischen den Säulen 1000x800 mm Einbauhöhe 600 mm Eilgang 26 mm/s Arbeitsgeschwindigkeit 5 mm/s Motor 4 kW Länge 1.260 mm Breite 1.060 mm Höhe 2.400 mm 4-Säulenführung Stößelführung rund Tisch und Stößel mit T-Nuten 2-Hand Bedienung Siemens SPS Manometer Betriebsanleitung Lichtschranke € auf Anfrage Siemens Touchscreen-Steuerung, 50 Programme speicherbar, zur Programmierung von: - Aufwärtshub und Abwärtshubquote - Pausenzeit im Boden - Zeit der Dekompression - Einstellung des Arbeitsdrucks - Stückzähler - Prestop in Aufwärts- und Abwärtsbewegung - Einstellung für manuelle und automatische Bewegung - Verwaltung von Alarmen und Anomalien € auf Anfrage Stundenzähler € auf Anfrage Stückzähler € auf Anfrage Dekompressionsventil € auf Anfrage Ölkühler mit Dekompressionsventil € auf Anfrage Druckschalter € auf Anfrage

Stanje: zelo dobro (rabljeno), Leto izdelave: 2009, Sústava na výrobu brožúr Horizon Zoradzovací stroj Horizon VAC 100 a, VAC 100m Počet staníc: 2 x 10 Max. formát: 500 x 350 mm Min. formát: 148 x 120 mm Kapacita nakladania: 55 mm na stanicu Rýchlosť: max. 9 500 cyklov/h Hmotnosť: 320 kg na vežu Rozmery stroja: 810 x 652 x 1 961 mm Napájanie: 230 V, 10,6 A, 2,3 kW Stolík na zníženie stohu HORIZON ST-40 Špecifikácie Max. formát: 350 x 500 mm Min. formát: 182 x 128 mm Hrúbka papiera: 52 – 208 g/m² Rýchlosť: max. 8 000 súprav/h Výška stohu: 360 mm Rozmery stroja: 1 353 x 652 x 1 027 mm (D x Š x V) Heftovacia a skladacia stanica SPF 200A Njdpfxjyhzube Agxela Prijímací formát, 4-stranové hárky: min. 180 x 105 mm, max. 508 x 356 mm Konečný formát brožúry: min. 85 x 105 mm, max. 250 x 356 mm Hrúbka brožúry: max. 25 hárkov, 100 strán Rýchlosť: do 4 800 cyklov/h Hmotnosť: 782 kg (s predným orezávačom FC-200A) Rozmery stroja: 3 450 x 810 x 1 250 mm (D x Š x V) Napájanie: 230 V, 5,3 A; 1,0 kW Orezávač FC 200A Voľné od 05/2026

Stanje: novo, Condition: New Estimated delivery time: approx. 4 months from order Country of origin: Italy Price: €132,500 Leasing rate: €2,504.25 Pressing force: 200 t Stroke: 500 mm Nodpfxewiq Abe Agxjla Distance between columns: 1250 x 1000 mm Installation height: 600 mm Rapid traverse speed: 25 mm/s Working speed: 3.5 mm/s Motor: 7.5 kW Length: 1550 mm Width: 1300 mm Height: 2700 mm 4-column guide Round ram guide Table and ram with T-slots Two-hand operation Siemens PLC Manometer Operating manual OPTIONS: - Light barrier Price on request - Siemens touchscreen control, 50 programmable programs, for programming: - Upstroke and downstroke ratio - Dwell time at bottom - Decompression time - Working pressure setting - Piece counter - Prestop in upward and downward movement - Settings for manual and automatic operation - Alarm and fault management Price on request - Hour counter Price on request - Piece counter Price on request - Decompression valve Price on request - Oil cooler with decompression valve Price on request - Pressure switch Price on request

Stanje: novo, Condition: New Delivery time: Approx. 4 months from order placement Country of origin: Italy Price: €172,500 Lease rate: €3,260.25 Pressing force: 300 t Stroke: 500 mm Clearance between columns: 1250 x 1000 mm Daylight opening: 600 mm Rapid traverse: 22 mm/s Working speed: 2 mm/s Motor: 7.5 kW Length: 1750 mm Width: 1500 mm Height: 2800 mm 4-column design Round ram guide Table and ram with T-slots Two-hand operation Siemens PLC Pressure gauge Operating manual OPTIONS: Light curtain € on request Siemens touchscreen control, up to 50 programmable programs, for configuring: - Upstroke and downstroke quotas - Bottom pause time - Decompression time - Working pressure setting - Piece counter - Pre-stop for upstroke and downstroke - Setting for manual and automatic operation - Alarm and fault management € on request Nljdpswir Acofx Agxoa Hour counter € on request Piece counter € on request Decompression valve € on request Oil cooler with decompression valve € on request Pressure switch € on request

Leto izdelave: 2026, stanje: novo, številka stroja/vozila: 1568, Delovna površina 3500 x 1500 mm (notranja dimenzija okvirja pribl. 3400 x 1400 mm) Zložljiva miza z 12 mm ploščo za prostorsko varčno postavitev Becker vakuumska črpalka z motorjem 1,25 kW, 400 V, 50 Hz Pretok vakuumske črpalke 40 m³/h Volumen rezervoarja 100 l Membrana iz naravnega kavčuka z raztegljivostjo 700 % Maks. višina obdelovanca pribl. 600 mm Nsdpfx Agjd Rzl Uexsla Zunanje dimenzije pribl. 3600 x 1850 x 1000 mm Vključno s podvozjem s 4 vrtljivimi kolesi Teža pribl. 440 kg brez prevoza, iz zaloge Seevetal,

Stanje: novo, Stanje novo Rok isporuke cca 8 nedelja od naručivanja Zemlja porekla Španija Cena 16.960 € Rata za lizing 325,63 € Kapacitet bušenja u konstruktivnom čeliku 40 mm Prihvat MK 4 Radijus ramena 360 mm Broj obrtaja 61 - 1.169 (9) o/min Snaga motora 2,2 kW Kapacitet narezivanja navoja M33 Dužina 550 mm Širina 950 mm Visina 2.363 mm Težina 610 kg Mehanički pomaci 0,1 / 0,2 / 0,3 / 0,4 mm/obr Maks. dubina bušenja 200 mm Prečnik stuba 175 mm Razmak vreteno - sto 35 - 835 mm Razmak vreteno - postolje 1240 mm Radni sto 550 x 550 mm Dimenzije postolja 950 x 550 mm ERLO (PROIZVEDENO U ŠPANIJI) ZA INDUSTRIJSKU UPOTREBU automatski pomak prenos preko zupčanika fiksni radni sto nagibni rotirajući sto prednji točak za osetljivi fini pomak uređaj za hlađenje osvetljenje OPCIJA (CENA NA UPIT): Uređaj za narezivanje navoja IR/RS ALTERNATIVA: Nledpfx Agewiq Htjxja VERZIJA ERLO B-40 SA ELEKTROMAGNETSKOM KVAČILOM CENA NA UPIT

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2016, This 4-axis HOMAG PROFI BMG 512/40/12/V/A was manufactured in 2016 and is equipped with a POWEREDGE edge banding unit and a 4-fold edge magazine. It features an 18-position disc tool changer, a 12 kW machining spindle, and a C-axis with unlimited swiveling range. The machine supports workpiece lengths up to 4000 mm and thicknesses up to 300 mm, making it ideal for modern woodworking applications. It also offers dynamic work area partitioning for optimal utilization of the machining space. Please contact us for more information about this machine. Additional Information Workpiece • Lengths: 4000 mm for single setup / 2250 mm for pendulum operation • Widths: 1450 mm for all units and front stop • Maximum workpiece thickness: 300 mm (including clamping devices) • Up to 60 mm with standard clamping devices without restrictions for units and extraction. Table • Automatic console table • Automatically adjustable console table • 8 consoles Y = 1500 mm • 16 side and stop pins 140 mm, electromechanically actuated • Dynamic area partitioning for optimal utilization in pendulum operation • Various double vacuum clamps • No vacuum pump included; connection to customer’s on-site vacuum system Tools • 18-position disc tool changer Main Drive • Machining spindle: 12 kW (S6 duty) / 9.5 kW (S1 duty) • Spindle with hybrid bearings Nedjx D Nzvepfx Agxola • Frequency-controlled RPM • Automatic feed reduction when spindle speed decreases Edge Banding Unit • POWEREDGE gluing unit • Gluing unit for 360° edge banding on butt joints • Glue application via applicator roller on edge material • 1 pressure roller Ø 50 mm, 1 trailing roller Ø 35 mm • Max. edge height: 65 mm • Edge thickness: 0.4 – 3 mm (veneer 0.4 – 2 mm / PVC 1.0 – 2 mm) • Hot air nozzle for heating thick edges on small radii, CNC-controllable Machine Control • POWERCONTROL PC 86 POWERTOUCH • 21.5" Full-HD multitouch display • WoodWOP for graphical, dialog-based creation of CNC programs • Diagnostic system WOODSCOUT Additional Equipment • Interface for FLEX 5 unit • C-axis with unit interface • Unlimited swiveling range • Coupling element for automatic tool change of the FLEX 5 unit • Drilling head • 21 spindles V17 / H4 / S0 / 90° • 17 vertical drilling spindles with quick-change system • T-shaped arrangement: 7 spindles in Y direction / 11 spindles in X direction • 4 horizontal spindles with saw 0 / 90° • Pre-scoring station • Moves with the machining gantry (X-axis) • Saw / milling unit for tool changer • Combined trimming and corner rounding unit, sensor-controlled • Combined flush trimming and scraper unit Additional Information • Coolant tank for machining spindle • Integrated chip conveyor, discharge to the left Note: Technical data and descriptions are for informational purposes only and are non-binding.

Stanje: rabljeno, prevoženi kilometri: 716.056 km, moč: 220 kW (299,12 KM), prva registracija: 08/2008, vrsta goriva: dizel, število sedežev: 48, vrsta prenosa: samodejen, emisijski razred: Euro 5, barva: bela, zavore: retarder, Oprema: ABS, +++Engine runs, consumes coolant+++ General: * Engine: Mercedes-Benz * AdBlue * Emission standard: EURO5 * Transmission: Automatic * Total seats: 48 * Seats: 47+1 elevated/fixed * Standing places: 112 Safety: * Retarder * ABS * ASR * EBS * Fog lights * Reversing camera Passenger area: * Auxiliary heater * Driver’s microphone * Stroller space * Wheelchair ramp * Wheelchair space * Stop request button * Interior camera Exterior: * Matrix / destination display * Double-width doors: 3 * Kneeling system * Tachograph card * Sun visor * Electrically adjustable exterior mirrors * Roof hatches * Roof fans * Roof ventilator Other: * German vehicle registration document * Twin tires * Vehicle dimensions: Length 17.94 m, Width 2.55 m, Height 3.1 m * Wheel covers * Tyres: Front approx. 40%, Middle approx. 40%, Rear approx. 40% Nljdexu Sxxopfx Agxoa Our internal vehicle number: 11873 Subject to errors and prior sale. Images and text may differ from the actual vehicle. Over 300 vehicles always in stock.

Stanje: rabljeno, Pneumatic cylinder FESTO DNU-40-125-PPV-A 14137. Nledpfx Aelkchrjgxja

Stanje: novo, New "CE". Length: 1250 mm Nsdpshkr A Dsfx Agxela Press force: 40 tons CNC control: ESA S 630 Touch 10" 2D Number of controlled axes: 4 (Y1-Y2-X-R) Y-axis stroke: 210 mm Opening: 415 mm Backgauge stroke: 750 mm Upper and lower tools included. Motor power: 4 kW Approximate weight: 3500 kg Dimensions: 2300 x 1800 x 2700 mm (h).

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, FESTO DGPL-40-1250-PPV-A-B-KF-GH-SH Linearaktuator. Guter funktionsfähiger Zustand. Nsdpfxstwqrwe Agxola Bitte sehen Sie sich auch unsere weiteren Angebote an.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2004, Predelava: 2025 Numerična kontrola: HEIDENHAIN TNC-320 Tehnične lastnosti Dimenzije Dimenzije mize: 4500 x 1100 mm Število T utorov: 8 Dimenzije T utorov: 22 mm Hodi osi Vzdolžni hod X: 4000 mm Prečni hod Y: 1200 mm Navpični hod Z: 1000 mm Rezkalna glava Tip glave: NOVA Univerzalna samodejno vrtljiva (UDG / vsakih 2,5º) Sistem vpenjanja orodij: Hidravlični Vretenasta prirobnica: ISO 50 (DIN 69871) / izvlečni vijak: DIN 69872 Območje vrtljajev: 20 - 3000 obr/min Moč vretena: 29,8 kW Pomiki Hitrost podajanja: 5000 mm/min Hitri pomik (X / Y, Z): 15000 / 10000 mm/min Teža in dimenzije Največja teža na mizi: 8000 kg Približna teža stroja: 23500 kg Približne dimenzije stroja: 11100 x 5392 x 3400 mm Dodatna oprema Zaščita: 2 sprednja vrata in nova obodna mrežna ograja (zunanja) Nlsdpfx Agoyw Uqxoxja Elektronski ročni volan: Nov HR-510 Pogoji prodaje Garancija: 6 mesecev na mehanske dele Cena in prodajni pogoji: Po dogovoru Preglejte vse tehnične lastnosti