Scm Formier nakup rabljenega (767)

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2013, številka stroja/vozila: AB-216795, Funkcionalnost: popolnoma funkcionalen, širina skobljanja: 230 mm, premer vretena: 40 mm, število vreten: 5, največja hitrost vretena: 6.000 obr/min, TEHNIČNE PODROBNOSTI Število vreten: 5 kosov Min. širina glodala: 25 mm Maks. širina glodala: 230 mm Min. višina glodala: 6 mm Maks. višina glodala: 120 mm Dolžina podajalne mize: 2.470 mm Vreteno 1 Vrsta vretena: spodnje Moč motorja: 5,5 kW Premer vretena: 40 mm Število vrtljajev glodalnega valja: 6.000 vrt/min Maks. premer glodala: 180 mm Vreteno 2 Vrsta vretena: desno Moč motorja: 7,5 kW Premer vretena: 40 mm Število vrtljajev glodalnega valja: 6.000 vrt/min Maks. premer glodala: 180 mm Bsdpjzxchljfx Aqtedg Vreteno 3 Vrsta vretena: levo Moč motorja: 7,5 kW Premer vretena: 40 mm Število vrtljajev glodalnega valja: 6.000 vrt/min Maks. premer glodala: 180 mm Vreteno 4 Vrsta vretena: zgornje Moč motorja: 9 kW Premer vretena: 40 mm Število vrtljajev glodalnega valja: 6.000 vrt/min Maks. premer glodala: 180 mm Vreteno 5 Vrsta vretena: spodnje Moč motorja: 5,5 kW Premer vretena: 40 mm Število vrtljajev glodalnega valja: 6.000 vrt/min Maks. premer glodala: 140 mm Hitrost podajanja: avtomatska Min. hitrost podajanja: 5 m/min Maks. hitrost podajanja: 25 m/min Regulacija hitrosti podajanja: spremenljiva Moč podajnega motorja: 3 kW Podajni pogon: kardanski pogon Premer podajnih valjev: 140 mm PODROBNOSTI O STROJU Sistem mazanja: ročni Premer sesalne šobe: 120 mm Napetost: 400 V Poraba električnega toka: 57 A Varovalka: 63 A Moč: 10 kW Dimenzije in teža Dimenzije (D x Š x V): 4.150 x 1.650 x 1.750 mm Lastna teža: 2.600 kg Transportni paketi: 1 kos OPREMA CE oznaka Dokumentacija Kardanski pogon Ročni sistem mazanja

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2006, številka stroja/vozila: AA1/015315, Funkcionalnost: popolnoma funkcionalen, širina skobljanja: 240 mm, število vreten: 8, delovna višina: 140 mm, TEHNIČNE PODROBNOSTI Maks. širina rezalnega valja: 240 mm Maks. višina rezalnega valja: 140 mm Dolžina podajalne mize: 2.500 mm Pogon podajalnika: kardanski pogon Sistem mazanja: samodejen Premer rezalnega valja: 40 mm Vretena Število vreten: 8 kosov Vreteno 1 Tip vretena: spodnje Na voljo orodje: da Vreteno 2 Tip vretena: desno Na voljo orodje: da Vreteno 3 Tip vretena: levo Moč motorja: 15 kW Na voljo orodje: da Vreteno 4 Tip vretena: desno Moč motorja: 11 kW Na voljo orodje: da Vreteno 5 Tip vretena: levo Moč motorja: 11 kW Na voljo orodje: da Vreteno 6 Tip vretena: zgornje Moč motorja: 15 kW Na voljo orodje: da Vreteno 7 Tip vretena: zgornje Moč motorja: 11 kW Na voljo orodje: da Vreteno 8 Tip vretena: spodnje Moč motorja: 11 kW Na voljo orodje: da Sistem podajanja Proizvajalec: H&M Maks. dolžina podajanja: 250 mm Sistem za izmet Proizvajalec: H&M Bdedpfxszxcfds Aqteg Maks. dolžina izmeta: 760 mm PODROBNOSTI O STROJU Dimenzije in teža Dimenzije (D x Š x V): 20.000 x 2.400 x 2.200 mm Prazna teža: 6.000 kg Število transportnih paketov: 8 kosov OPREMA Orodja za vseh 8 vreten Samodejni sistem mazanja Električne sheme Tehnični podatki Dokumentacija Označitev CE

Stanje: rabljeno, v posebni opremi Strojna miza v dveh sistemih podpore – leva polovica mize s podlagami TVN, desna polovica mize ALU s svojim vakuumskim krogom Hodi: X = 4400 mm, Y = 1720 mm, Z = 400 mm Vpenjalno orodje HSK 63 F Motor 7,5 kW, 900–20.000 vrt/min. Inverter 18 kW za agregat Prisma – povečana izhodna moč do 11 kW Bdsdpfxozxzgmo Aqtjg Menjalnik orodja RAPID 24 = 24 mest za orodja Agregat za vrtanje z 18 vreteni Oprema za obdelavo vrat (H = 110 mm) - za obdelavo desnih in levih vrat - z 4 pnevmatskimi pomočnimi pripomočki za pozicioniranje, vsak do 20 kg - 6 referenčnih opor, ki presegajo furnir Lasersko pozicioniranje za sistem TV Osrednji sesalni priključek nad CNC Vakuumna črpalka 250 m³ Nadzorna enota/električni omarici: - NUM serija 1000 z pisarniškim računalnikom - XILOG-PLUS - Kabelski daljinski upravljalnik - Analogni modem s programsko opremo za teleservis Nihajna obdelava standardna za 2 delovna območja LED zaslon / pozicioniranje sesalnika Motor. transportni trak za odrezke Protizdrsna podloga v treh delih / spredaj Velik paket dodatne opreme z vakuumskimi sesalniki, oporami itd. Stroj iz skladišča mizarstva zaradi upokojitve Stroj je še vedno v uporabi in v zelo dobrem stanju od trenutne lokacije

Stanje: rabljeno, težka precizna formatna krožna žaga SCM SI 550 E Class Različica: tesarstvo - mizarstvo Dolžina reza: 3200 mm Širina reza: cca 1500 mm Glavni motor: 11 kW Bjdjzi Sctepfx Aqtsdg 3 hitrosti: 2500/3000/4200 o/min Kotni prislon z dolžinsko kompenzacijo Žagin list do Ø 550 mm Električno dvigovanje in nagibanje žaginega lista z digitalnimi prikazi Stroj iz upokojitve / prva dostava 2011 Stroj delavniško pregledan, v VRHUNSKEM STANJU Na zalogi v Liebochu

Stanje: kot nova (razstavni stroj), pneumatic single-head boring machine with 21 spindles MAGGI Model: Boring System 21 STANDARD EQUIPMENT: - Aluminium fence with 2 stops (each 1,500 mm, right and left) - No. 5 quick-change chucks - No. 2 patented safety pneumatic hold-down cylinders - Connector for suction/extraction unit compliant with EU standards KEY FEATURES: - Worktable made of cast iron - Boring head made of aluminium - Patented spiral system for fine adjustment of drilling depth - Pneumatic lowering of the boring head, lockable in any position between 0° - 90° Beded Supgepfx Aqtsdg - Extendable cast iron side stops with millimetre adjustment, readable on a scale with magnifier - Drill height adjustment via digital counter with decimal display - Fixed stops, 37 mm, for cup hinges - Machine constructed according to CE standards TECHNICAL DATA: - Boring spindles (left red/right black): 21 pcs. (10/11) - Distance between boring spindles: 32 mm - Working width: 640 mm - Max. drilling depth: 65 mm - Number of pneumatic hold-down cylinders: 2 pcs. - Max. workpiece size: 900 x 3000 x 60 mm - Max. workpiece height: 65 mm - Number of motors: 1 pc. - Motor power: 1.5 kW, 400 V, 50 Hz - Motor speed: 2800 rpm - Working pressure: 6-8 bar - Standard air consumption per cycle: 10 l/cycle - Extraction port diameter: 80 mm - Worktable height: 860 mm Overall dimensions (approx.) L x W x H: 1030 x 1030 x 1285 mm Weight (approx.): 260 kg

Stanje: novo, Leto izdelave: 2025, težka konstrukcija z litoželezno mizo nežni premiki z ročico in ročnim kolesom ekcentrična vpenjalna naprava nastavek za vrtanje moznika z rasterji 16-22-25-32 mm 2 hitrosti 1500/3000 obr/min WESCOTT vrtalna glava 1 - 16 mm Bdedpfx Ajycg U Eeqtjg CE Dimenzije delovne mize: 287 x 550 mm Vzdolžni hod: 200 mm Vertikalni hod: 160 mm Prečni hod: 125 mm Moč trifaznega motorja: 1,8 kW, 400 V, 50 Hz

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2023, SCM Accord 40 fx CNC machining center with the following equipment: Working area X-Y = 6360 x 1905 mm, Z = 350 mm OF0158 Usable passage height Z = 350 mm with H50 suction cups OF0165 Axis travel speed for Accord 40 fx PRO-SPEED version OF0168 Pendulum mode OF0169 Automatic axis lubrication Bdsdpfeyfgzdex Aqtsg OF0299 TELESOLVE remote maintenance via internet 450328 eye-M PRO operating console with integrated PC 450291 Additional fixed operating panel 870068 TECPAD - remote control for machine functions 560058 No. 10 MATIC support rails - L1825 230429 MAXI processing unit - Prisma KT 1 870046 Preparation for right-angle head "Prisma KT-KS" 470014 Air nozzle for tools 870119 Tool length measuring device 870120 Panel thickness measuring device 870009 Drilling unit F16 OF0176 Front stop row H50 for worktable with 10 support rails 510205 Preparation for clamping jaws for worktable with 10 support rails 480178 Front stop row H110 for worktable with 10 support rails 480105 Rear stop row H110 for worktable with 10 support rails 480137 First side stop row H110 for worktable with 10 support rails 480005 Suction cups H110 145x145 mm, 36 pcs 480006 Suction cups H110 145x55 mm, rotatable, 10 pcs 480007 Suction cups H110 180x65 mm, rotatable, 10 pcs 480018 Suction cups H110 145x30 mm, rotatable, 5 pcs 480410 Lifting devices H110, 8 pcs 350016 Vacuum pump 250 (300) m³/h 560538 Additional automatically adjustable base for MATIC support rail 10 190046 PRO-SPEED safety system 524800 "SAV€NERGY" 2.0 energy saving systems 210837 TR12 – side tool magazine 210056 Rapid 24 – rear tool magazine OF0182 Air conditioning for control cabinet OF0438 Human-Machine Interface software (HMI) MAESTRO ACTIVE OF0543 Operating system Windows 10 embedded 64 bit OF0422 Machine operation interface software Maestro cnc OF0435 Maestro cnc hardware dongle 524309 Maestro 3D-Advanced module 109993 MACHINE LANGUAGE: German SPECIAL FEATURES INCLUDED: - Increased max. panel width for complete machining up to 2,120 mm; beam length remains unchanged at 1,900 mm. - 10 support suction cups for offcuts. MACHINE ALREADY DISMANTLED AND STORED. LIST PRICE NEW 2023 EUR 399,890.--

Stanje: novo, Equipment: Height adjustment of the brush units via handwheel with numeric display Brush diameter 200 mm Machine in standard design, CE compliant Bodjdd Hi Espfx Aqtodg Technical data: Working width: 600 mm Max. working height: 300 mm Extraction nozzle diameter: 2 x 140 mm Carpet feed motor power: 0.37 kW Feed speed variable: 3 - 20 m/min Brush unit motor power: 4.0 kW each (optionally 5.5 kW) Machine weight: approx. 750 kg Further technical data: see brochure attached Including ACCESSORIES: - Steel brush, brass-coated, Ø 200 mm - TYNEX brush, Ø 200 mm Note regarding used machines: • Errors in technical data and prior sale reserved. • Stated prices are ex works – free loading! • The machines have been cleaned and functionally tested. • All machines are sold as inspected with no warranty whatsoever. Buyers are welcome to inspect the machines on site. • Special agreements only valid in written form. (Inquiries will only be answered if you provide your address and telephone number!)

Stanje: novo, Clean air extraction / dust extractor Dust tested to H3 standard, residual dust content less than 0.1 mg/m³ Suitable for extracting and separating dry wood and plastic chips High extraction performance with minimal space requirements Maximum output in this class Very quiet operation Designed for commercial use Sturdy and compact housing made of galvanized sheet steel Extraction port easily convertible from left to right, offering flexible use Large maintenance openings Large, mobile chip containers with clamping bracket and chip collection bag Dust extractor is delivered fully assembled, ready for immediate use All models are mobile Filter material made from polyester fleece, aluminum-coated for long service life Filters are antistatic as standard, certified and approved according to Category M-BIA The fan is installed downstream of the filter Extraction motor energy efficiency class: IE3 Nominal airflow: 1,448 m³/h Nominal negative pressure: 2,242 Pa Drive motor power: 2.2 kW, 400 V, 50 Hz Chip collection volume: 2 x 165 l Bdedjr A Eq Rspfx Aqtsg Outer diameter of extraction inlet: 160 mm Filter surface area: 9.21 m² Residual dust content: < 0.1 mg/m³ Maximum sound pressure level: 73 dB(A) Dimensions (L x W x H): approx. 1,618 x 830 x 1,653 mm Weight: approx. 268 kg PM VERSION Automatic filter cleaning with pneumatic system, operating a wiper frame

Stanje: novo, Leto izdelave: 2023, Robust steel grey cast iron construction Milling spindle can be tilted backwards from 0° to -45° Forward and reverse rotation of the milling spindle Large-sized milling unit made of grey cast iron, mounted directly to the table Solid and precise cast iron table Standard swing-type milling guard Aluminium sliding table with ball contact system Torsion-resistant, highly precise, smooth-running, and reliable in daily operation 10-year SCM warranty against wear on the guideways Milling spindle supported at the top with precision ball bearings for minimal bearing load and maximum service life Precise milling fence with rapid adjustment and fine adjustment with scale at the fence jaw Integrated extraction port Large milling table opening enables use of larger tooling Weight approx. 290 kg Bdedpfx Aqoiknp Retog Extraction connection diameter 2 x 120 mm Work table L x W = 1000 x 435 mm Table height 900 mm Sliding table length 1000 mm Sliding table width 270 mm Drive motor power 5.0 kW, 400 V, 50 Hz Milling spindle tilt 0° to -45° Usable spindle length 100 mm Maximum table overhang 130 mm Spindle speeds 3500/7000/10000 rpm Spindle diameter 30 mm Maximum retractable tool diameter 180 mm

Stanje: novo, Adjustment of infeed table using parallelogram system Chip removal display via graduated scale Simultaneous height adjustment and locking of work tables, complete with anti-tilt mechanism Quick conversion system for switching from surfacing to thickness planing (CE Version) Featuring a dedicated support for opening surfacing tables and an automatic pneumatic positioning system for the extraction hood, with hydraulic assistance "READY" electronic control includes: – Thickness table adjustment – Manual, semi-automatic, and automatic modes with 99 storable work programs – Additional functions: calculator and operating hours counter Automatic star-delta starting for main motor Machine table with height adjustment via 4 steel threaded spindles Rubber-coated outfeed feed roller Interchangeable feed rollers Segmented pressure shoes at infeed Cutter block and setting gauge for planer knives Micro-safety switches for correct positioning of surfacing tables and extraction hoods Surfacing guard (CE version) Automatic motor brake on main motor Thermal overload relay Emergency stop switch Lockable main switch CE declaration of conformity Bdodpfx Ajd Akyzjqtog Technical data: Usable working width [mm]: 520 Total table length [mm]: 2310 Cutter block diameter [mm]: 120 Motor power [kW]: 9.0 Hz 50, 400 V Cutter block speed [rpm]: 5000 4 knives [mm]: 35 x 3 x 520 Aluminium surfacing fence [mm]: 1200 x 190 Surfacing fence tilting from 90° to -45° Min./max. planing height [mm]: 3 / 250 Feed speed for thicknessing [m/min]: 5-8-12-18 Extraction hood diameter surfacing [mm]: 120 Extraction hood diameter thickness [mm]: 120 Including options: - "TERSA" cutter block with disposable reversible knives - Tiltable auxiliary fence for thin workpieces

Stanje: novo, Digital version with motorized thickness table adjustment • Helical-toothed steel feed roller for constant and uniform material feed • Material feed with two speeds • Extra-long surfacing tables enable easy and precise planing of workpieces • Work tables are made of stress-relieved, annealed cast iron—durable, distortion-free, and highly resistant • Surfacing tables open to the rear simultaneously for minimal setup times • The high machine weight ensures maximum precision and smooth operation • Powerful industrial motor • Robust steel/cast iron construction • Chip removal from as little as 0.2 mm (with a minimum workpiece thickness of 3 mm) thanks to the helical-toothed feed roller—ideal for efficient planing of precious timber Technical Data: Working width 410 mm Cutterhead diameter (mm) 95 mm Max. chip removal 5 mm Total surfacing table length 2200 mm Thickness table dimensions 410 x 775 mm Thickness table feed speed 6/12 m/min Min./max. working height thickness table 3 – 240 mm Min. working length thickness 180 mm Motor power 5.0 kW, 400V, 50 Hz Bjdpfedvn Hwsx Aqtedg Including the following options: • Motorized thickness table adjustment with digital display • Fold-down auxiliary fence for thin workpieces • TERSA cutterhead system

Stanje: novo, Extra-long jointer tables (2250 mm) made from a single piece allow for easy straightening of workpieces. - Work tables are made of cast iron, stress-relieved and distortion-free, making them durable and consistently flat - Simultaneous opening & closing of the jointer tables with single-point locking - Powerful industrial motor - Fixed mounted extraction hood - Robust steel/cast iron construction Bsdpecq E Uuefx Aqtjdg - Large fence 1200 x 150 mm (standard with auxiliary fence) - Material feed with four speeds via separate motor - Thicknessing table raised on four sturdy columns, protected by dust bellows - Helical gear infeed roller on the thicknesser - Rubber outfeed roller at the exit of the thickness planer - Preparation for slot mortiser attachment - Digital display for thickness height adjustment (accuracy 0.1 mm) - Automatic star-delta switch Technical Data: Total table length: 2250 mm Working width: 520 mm Max. depth of cut: 5 mm Thickness table dimensions: 850 x 520 mm Min/max. working height: 3/240 mm Feed speeds: 5/8/12/18 m/min Cutterblock diameter/planer knives: 120 mm/with 4 HSS knives Speed: 5000 rpm Self-braking motor: 400 V/50 Hz/S6 - 40 %, 7.0 kW Extraction port diameter: 1 x 120 mm Weight: approx. 650 kg Includes options: - "Teresa" cutterblock Ø 120 mm, monoblock, with 4 quick-release knives - Additional auxiliary fence for thin workpieces - Motorized height adjustment of thickness table with digital display - Thickness table with 2 swing-away idle rollers

Stanje: zelo dobro (rabljeno), Surface Planer, used Working width: 520 mm Total table length: 3000 mm Infeed table length: 1780 mm Outfeed table length: 1180 mm Adjustable fence (tiltable), dimensions 1500x175 mm Motor power: 4.0 kW, 400 V, 50 Hz Cutterhead speed: 5000 rpm 4-knife cutterhead, diameter 120 mm Max. depth of cut: 8 mm Extraction port: Ø 120 mm Table height: 860 mm Hydraulic table lifting/lowering with foot pedal Digital cutting depth display Noise-reducing combs on the cutterhead Star-delta starter Emergency stop button CE compliant Includes all documentation Knife setting gauge NEW V-belts NEW cutterhead bearings NEW planer knives Dimensions (L x W x H): 3000 x 950 x 1100 mm Weight approx. 900 kg Note on used machines: • Subject to technical changes and prior sale. • Prices quoted are ex location – free loading! • Machine has been cleaned and function-tested. • All machines are sold as seen and inspected, without any warranty or guarantee. Buyers are welcome to inspect the machines on site. • Special agreements are only valid if made in writing. Bdodpfxjy Emf Re Aqtjg (We answer inquiries only with your address and telephone number!)

Stanje: zelo dobro (rabljeno), Planing width: 520 mm Min./Max. working height: 3 - 240 mm Motor power: 5.5 kW, 400 V, 50 Hz Cutter shaft speed: 4500 rpm Cutter shaft diameter: 120 mm Planer knives: 4 pcs Thicknessing table dimensions: 520 x 850 mm Feed speed: 6.5 / 10 / 13 / 17 m/min Extraction port diameter: 150 mm Features: - Electric height adjustment Bdjdpsy Egmujfx Aqtsg - Hand wheel for fine adjustment of thicknessing table height - Helical-toothed steel infeed roller - Sectional pressure bar - 2 steel outfeed rollers - Under-table roller - Undervoltage release - Emergency stop switch - Knife setting gauge - Test report to confirm compliance with Section 4 of the AM-VO NEW drive belts NEW ball bearings NEW planer knives Approx. dimensions (L x W x H): 1120 x 990 x 1000 mm Approx. weight: 600 kg Note on used machinery: • Subject to errors in technical details and prior sale. • Prices quoted are ex works, free loading! • The machine has been cleaned and function tested. • All machines are sold as inspected, without any warranty whatsoever. Buyers are welcome to inspect the machines at our site. • Special agreements are only valid in written form. (We only respond to inquiries that include your address and telephone number!)

Stanje: novo, Working width (finished size): 23–180 mm Working height (finished size): 6–105 mm Minimum workpiece length: 300 mm Feed speed: 6–12 m/min Motor power, horizontal spindles: 2 x 7.5 kW Motor power, vertical spindles: 1 x 7.5 kW Spindle speed: 6,000 rpm Spindle diameter: 35 mm Clamping length, vertical spindles: 120 mm Clamping length, horizontal spindles: 190 mm Manual lubricant pump Profile capacity without axial adjustment on vertical spindle: 10 mm Loose roller integrated in outfeed table Bdjdpfxeiiv Dcs Aqtjg Extraction connection diameter: 4 x 120 mm Including OPTIONS: - Motor-driven feed roller in front of the planer with lever for quick adjustment - Front vertical pressure unit in front of the left vertical spindle - Infeed table length: 2,300 mm - Tool package consisting of 4 planer heads and one jointer rebate cutter

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2005, Automatic moulder with 9 spindles and SCM Control 100 PC control for all spindles Max. working width: 240 mm Min. working width: 25 mm Max. working height: 120 mm Min. working height: 10 mm Minimum workpiece length: 640 mm Feed speed: 6 - 36 m/min, variable Spindle speed: 6000/8300 rpm Spindle diameter: 40 mm Usable length of vertical spindles: 140 mm Usable length of horizontal spindles: 250 mm Axial adjustment of vertical spindles relative to worktable: 0 - 80 mm Axial adjustment of horizontal spindles relative to right guide: 0 - 45 mm Min. and max. profile tool diameter: 100 - 220 mm Min. and max. cutterhead diameter: 120 - 140 mm Profiling capacity of 2nd lower horizontal spindle with 200 mm tool diameter: 15 mm Feed motor power: 5.5 kW Diameter of feed rollers: 140 mm Infeed table length: 2500 mm Quick adjustment of infeed table and guide: 10 mm Extraction capacity: 7500 m³/h Compressed air supply: 6 - 10 bar Weight: 6000 kg Dimensions (L x W x H): 6300 x 1620 x 1655 mm Spindle configuration: Lower horizontal spindle Motor power: 11.0 kW Spindle speed: 6000 rpm Right vertical spindle Motor power: 7.5 kW Spindle speed: 8300 rpm Left vertical spindle Motor power: 7.5 kW Spindle speed: 8300 rpm 2nd right vertical spindle Motor power: 7.5 kW Spindle speed: 8300 rpm 2nd left vertical spindle Motor power: 7.5 kW Spindle speed: 8300 rpm Upper horizontal spindle Motor power: 11.0 kW Spindle speed: 8300 rpm 2nd lower horizontal spindle Bdsdpfxsg Umrmo Aqtog Motor power: 12.0 kW Spindle speed: 8300 rpm 2nd upper horizontal spindle Motor power: 11.0 kW Spindle speed: 8300 rpm 3rd lower horizontal spindle Motor power: 7.5 kW Spindle speed: 8300 rpm SET - UP quick adjustment system Work tables with fine adjustment of all units via Control 100 PC system Axial adjustment range of vertical spindles: 80 mm large tool diameters Pneumatically operated full safety enclosure Feed system with full cardan drive Infinitely variable feed speed Electric height adjustment of the feed system and spindles with independent control Segmented pressure shoes after upper horizontal spindles Fine adjustment of outfeed table Pneumatic device for spindle locking in working position Automatically adjustable left vertical spindle Including ZIWO CL 15 feeder unit Note for used machines: • Specifications are subject to errors and prior sale. • Listed prices are ex works – free loading! • The machines have been cleaned and function tested. • All machines are sold as seen, with no guarantee or warranty whatsoever. Buyers are welcome to inspect the machines at the location. • Special agreements are only valid in written form. (We only respond to inquiries with your address and telephone number!)

Stanje: novo, The best-selling edge banding machine in its class with an unmatched price/performance ratio. SCM edge banding machine for plastic edges from 0.4 - 3 mm and solid wood edges up to 5 mm, equipped with a new corner rounding unit. Edge thickness for roll material: 0.4 - 3 mm Maximum edge thickness for strip material: 5 mm Minimum – maximum workpiece thickness: 8 - 50 mm Feed speed: 9 m/min Pre-milling unit: 2.2 kW, 9000 rpm Glue pot: 0.18 kW, 0.8 kg Saw trimming unit: 0.19 kW, 12,000 rpm Flush/radius trimming unit: 2 x 0.35 kW, 12,000 rpm Corner rounding unit: 0.35 kW, 12,000 rpm OPTIONAL Radius scraper Surface scraper Grooving unit 1.1 kW, 12,000 rpm, groove width 4 mm Buffing unit with 2 independent motors Flush/radius trimming unit with tracing rollers Heatable infeed fence Quick-change glue pot system ... Bdjdpfx Aqsc S Di Retsg

Stanje: novo, Multi-combination machine with aluminium sliding table for sawing, milling, surface/thickness planing and optional slot mortising Torsion-resistant steel/cast iron construction Machine table made of cast iron, hardened and ground Smooth-running anodised aluminium sliding table, 10-year SCM warranty on sliding table guides Large crosscut frame with extendable aluminium telescopic fence and fold-away stops With combination saw/miter fence with 45° quick adjustment Max. saw blade Ø 315 mm with optional scoring unit, tiltable from 90° to 45° Helically geared steel infeed roller for consistent wood feed during thickness planing Four spindle speeds, manually adjustable Standard with forward/reverse spindle rotation Three independent motors for each working unit Sliding table with ball contact system Equipped with a proven ball contact system, used millions of times Permanently smooth operation due to hardened and ground guides Not sensitive to dust and dirt due to minimal contact point between ball and trapezoidal rail The extraction ports for surfacing and thickness planing are on the same (right) side. The extraction hose can therefore be used from the same side for both planing modes. Helically geared steel infeed rollers for constant and uniform workpiece feed Massive anti-kickback devices for operator safety 3-knife cutter block for optimal planing results Crosscut length: 1600 mm Max. saw blade diameter with scorer: 315 mm Max. cutting height at 90° / 45°: 100/79 mm Max. crosscut width left of the saw blade: 1660 mm Cutting width at rip fence: 800 mm Saw spindle speed: 3500 rpm Saw blade tilt: 90° - 45° Working width: 300 mm Surface table length: 1260 mm Cutter block diameter / number of knives: 72 mm / 3 pcs. Table dimensions: 300 x 450 mm Min. / max. working height: 3 mm / 220 mm Max. material removal: 4 mm Feed speed: 7 m/min Spindle diameter: 30 mm Usable spindle length: 100 mm Max. tool diameter retractable: 180 mm Spindle speeds: 3500/6000/8000 rpm Motor power: 3 x 4 kW, 400 V, 50 Hz Bodeiiyppspfx Aqtsdg Extraction port diameter: 4 x 120 mm Extraction port Ø saw blade guard: 60 mm Weight: 430 kg OPTIONS: - Professional fences: EUR 300 Saw fence with quick locking and micrometric adjustment Planer fence 90° ÷ 45°, continuously adjustable - Scoring unit incl. saw blade: EUR 292 - Handwheel with digital readout for thickness table positioning: EUR 129 - Mobility kit: EUR 119 - 2 additional handwheels for aggregate adjustment: EUR 45 - TERSA cutter block, Ø 72 mm: EUR 212 - Xylent spiral cutterhead, 3 rows of knives: EUR 717 - Aluminium slot mortising unit: EUR 390 - 2 stop flaps for crosscut fence: EUR 150

Stanje: novo, Stable steel and cast iron construction High-precision sliding table made from anodised aluminium, with a travel distance of 2250 mm Maximum saw blade diameter of 315 mm, saw blade tiltable to 45° Large outrigger table (960 x 600 mm) with extendable aluminium telescopic fence up to 2660 mm Heavily ribbed jointer tables made of annealed, stress-relieved cast iron for decades of stability and flatness Helically toothed steel feed roller for consistent material feed Three manually adjustable spindle speeds Spindle moulder with forward and reverse rotation Three independent industrial motors Equipped with lockable main switch, motor protection switch, and emergency stop switch Jointer table width: 410 mm Jointer table length: 1810 mm Maximum depth of cut: 4 mm Thicknessing table length: 605 mm Thicknessing table width: 410 mm Minimum working height: 3 mm Maximum working height: 230 mm Feed speed: 7 m/min Maximum depth of cut: 4 mm Extraction port diameter: 4 x 120 mm Planer cutter block type: TERSA (3 pcs) Cutter block diameter: 72 mm Speed: 5200 rpm Panel saw cutting length: 2250 mm Cutting width with rip fence: 900 mm Maximum crosscut width left of saw blade: 2310 mm Saw blade tilt: 90 – 45° Maximum cutting height at 90°: 90 mm Maximum cutting height at 45°: 63 mm Saw blade diameter: 315 mm Saw blade speed: 4000 rpm Sliding table and work table Sliding table length: 2600 mm Spindle diameter: 30 mm Spindle speeds: 3500/7000/10000 rpm Maximum milling tool diameter, retractable/not retractable: 180/210 mm Drive motor power: 3 x 5.0 kW, 400 V, 50 Hz Bjdpfoiiynnjx Aqtsdg Machine weight approx.: 560 kg INCLUDES OPTIONS: - Handwheel with gravity digital readout for thickness table positioning - Sliding table length 2600 mm - Professional fences - 'TERSA' planer cutter block - Spindle moulder with forward and reverse rotation

Stanje: novo, Electric Heated Platen Press SCM Model: gs 6/90 30-13 Offer Type: New machine Technical Data: Dimensions of heating platens: 3000 x 1300 mm Number of platens: 2 pcs Maximum temperature of platens: 120°C Recommended operating temperature of platens: 90°C Number of press cylinders: 6 pcs Hydraulic pump motor power: 3.0 kW, 400 V, 50 Hz Pressing force: 90 t (900 kN) Diameter of press cylinders: 70 mm Number of levels: 1 Daylight opening (approx.): 400 mm Connected load: 26.0 kW, 400 V, 50 Hz Heating Platens: Electrically heated aluminium sandwich platens from ELKOM, Germany. Continuously adjustable up to max. 120°C, up to 150°C on request. Thermal insulation towards the press frame. Platens are mounted with special brackets to allow for necessary thermal expansion. Hydraulics: Bsdpfsfh Tmmjx Aqtjdg Compact hydraulic pump, integrated in the press frame, from HAWE Germany. 2-stage design for closing and pressure build-up phase. Hydraulic cylinders made of high-quality, tempered and ground steel with large diameter. Press Frame: The press frame is a heavy-duty, torsion-resistant, stress-relieved welded steel construction. Presses of the gs series can be loaded from all four sides. Press tables are constructed from welded HEA profiles. Precision machining of the assembly components is done on state-of-the-art CNC machines. Uniform and precise movement of the press table is ensured by rack-and-pinion and self-lubricating slide guides on 2 corners of the frame. Control: Side-mounted control panel with SIEMENS 7'' colour touchscreen Proprietary SCM software enables simple, intuitive operation. The following parameters can be programmed, called up, and changed: - Automatic calculation of maximum allowable hydraulic press pressure based on workpiece size. - Storage of up to 100 programs (temperature, specific pressure, pressing time, platen size) possible. - Direct hydraulic pressure setting. - Internet connectivity for remote maintenance service. - Electronic control of pressing time - Electronic monitoring of platen temperature - Automatic pressure recovery - Complete diagnostics and fault display with messages on the screen OPTIONAL EXTRAS: - Electronic flatness control (misfeeding monitoring) - MYLAR film for protection and easy cleaning of the electric platens - Surcharge for 120 t press force - ELKOM platens with gold anodising finish

Stanje: novo, Work table dimensions: 2500 x 780 mm Milling spindle diameter: 30 mm Swivel range of the milling spindle: +/- 45.50° Clamping length of the spindle: 140 mm Max. tool diameter under the table: 300 x 80 mm Spindle base overhang from table: 50 mm Extraction port diameter: 1 x 120 & 2 x 100 mm Electrospindle motor power: 7.50 kW Electrospindle with inverter for speeds from 900 to 12,000 rpm Swiveling control panel with "Easy Touch 7" electronic control "Flex" milling fence with automatic adjustment via electronic control Spindle forward/reverse operation Extendable table support at the front INCLUDES OPTIONS: - "Fast" table insert with automatic adjustment via 'Easy' control - "LL" version with 2 cast iron table extensions, total length 2500 mm Note on used machines: • Technical data and prior sale subject to change and errors. • Quoted prices are ex-works, loaded free on truck. • The machines have been cleaned and function tested. • All machines are sold as inspected, without any warranty claims. Buyers are welcome to inspect the machines at the location. • Special agreements are only valid if made in writing. (We only respond to inquiries with your full address and telephone number!) Bjdod Etkhopfx Aqtedg

Stanje: zelo dobro (rabljeno), Wide Belt Sander for Calibration and Fine Sanding SCM Model RCS 1st Unit: Calibration roller, steel 2nd Unit: Combination unit (roller 60 Sh, sanding pad with 2 inserts (hard, soft)) Working width: 920 mm Abrasive belt dimensions: 930 x 1,525 mm Motor power: 11.0 kW, 400 V, 50 Hz Feed motor power: 0.37 kW, 400 V, 50 Hz 2 feed speeds Electromotoric table height adjustment Main switch lockable 2 x emergency stop Table extension with 2 rollers, front & rear Sanding pad inserts fitted with new graphite cloth Includes nearly new abrasive belts Includes all documentation Note for used machinery: Bedpfxexqggcj Aqtodg • Errors in technical specifications and intermediate sale reserved. • Listed prices are ex-works and free loading! • The machinery has been cleaned and function-tested. • All machines are sold as seen, with no warranty or guarantee whatsoever. Buyers are welcome to inspect the machines on site. • Special agreements are only possible in written form. (We only respond to inquiries that include your full address and telephone number!)

Stanje: zelo dobro (rabljeno), Wide Belt Sander for Calibration and Fine Sanding Working width: 1100 mm Min/max workpiece height: 3 - 120 mm Feed motor power: 0.8 kW Abrasive belt speed: 18 m/sec Abrasive belt dimensions: 1115 x 2620 mm Feed speed: 4.5 / 9 m/min Extraction port: 3 x 160 mm Compressed air connection: 6 bar 1st Unit: Sanding roller Rubber-coated 90 Sh Motor power: 11 kW 2nd Unit: Combination unit Rubber-coated sanding roller 60 Sh Rigid sanding pad Motor power: 11 kW 3rd Unit: Cleaning brush Automatic workpiece thickness adjustment at infeed with digital thickness display Table extension at outfeed Dimensions (approx.) L x W x H: 2291 x 1784 x 2350 mm Weight (approx.): 3000 kg Note for used machines: • Subject to technical changes and prior sale. • Prices quoted are ex-location and free loaded. • The machine has been cleaned and function tested. • All machines are sold as inspected, without any warranty claims. Buyers are welcome to inspect the machine at its location. • Special agreements are only valid if made in writing. Bodpfotwzyfsx Aqtsdg (We only respond to inquiries that include your address and phone number!)

Stanje: novo, Wide belt sander for calibration and fine sanding Working width: 1,100 mm Bdedpfsitvkusx Aqtjg Min./Max. working height: 4 / 170 mm Abrasive belt width: 1,115 mm Abrasive belt length: 2,150 mm Gear motor: 2.2 kW Feed speed: variable m/min Infeed and outfeed support rollers for long and short workpieces Oscillating belt cleaning blower 1st unit Oscillating belt cleaning blower 2nd unit Oscillating belt cleaning blower 3rd unit 10” touchscreen operating panel “eye-S” 1st unit: steel roller 2nd unit: rubber-coated calibrating roller 85SH 3rd unit: combination unit with pneumatic segmented sanding pad/rubber sanding roller 35 SH Motor power 1st unit: 18.5 kW Motor power 2nd & 3rd unit: 18.5 kW Version "B" for RRCS with: pneumatic switching on/off 1st unit pneumatic switching on/off 2nd unit pneumatic switching on/off 3rd unit “MESAR” elastic segmented sanding pad pneumatic switching on/off of the sanding pad unit electronic adjustment of working height SPECIAL PRICE! AVAILABLE IMMEDIATELY!