Sahinler Rm 2030.90 nakup rabljenega (4.697)

Stanje: rabljeno, Leto izdelave: 1995, Sheet width: 2100 mm Sheet thickness: 2.0 mm Frame opening: 2150 mm Roll diameter: 90 mm Gedpfx Aswrzrronfjbl Total power requirement: 1.5 kW Machine weight: approx. 0.7 t Space requirement: approx. 2.5 x 0.7 x 1.3 m 3-roll bending machine - 2 powered rolls - Foot switch - Emergency stop device

Stanje: novo, Dimenzija (D x Š x V): 1.630 x 700 x 1.200 mm Teža ca.: 480 kg Skupna potrebna moč: 1,1 kW Upogib: 2 Debelina pločevine: 3 mm Dolžina pločevine: 1.050 mm Tehnični podatki Valjčna naprava za pločevino Premer valja: 90 mm Hitrost valjanja: 6 m/min • Asimetrična razporeditev valjev • 2 valja gnana s pomočjo zavornega motorja • Nastavitev zadnjega valja z ročnim kolesom • Zgornji valj izmenljiv Gsdpod Eqqqsfx Anfebl • Naprava za konusno valjanje • Dvojna nožna stikala za desni-levi tek • Spodnji in zadnji valj z utori za žico • Navodila za uporabo v NEMŠČINI DODATNO: kaljeni valji EURO 900,--

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2008, Sahinler hidravlični 4-valjni obsežnični stroj tip 4RM 10-130 HRC Tehnični podatki: Zmogljivost Dolžina upogibanja: 1050 mm Zmogljivost upogibanja brez predupogiba (5x premer zgornjega valja): 6 mm Zmogljivost upogibanja brez predupogiba (5x premer zgornjega valja): 5 mm Zmogljivost upogibanja s predupogibom (5x premer zgornjega valja): 4 mm Valji Premer centralnih valjev: 130 mm Premer stranskih valjev: 110 mm Delovna hitrost: 5 min⁻¹ (obrati/min) Pogon Pogonska moč: 4,5 kW Dimenzije Dolžina: 2750 mm Širina: 900 mm Višina: 850 mm Teža: pribl. 1100 kg - Jeklena varjena konstrukcija - Stroji so namenjeni tankim aluminijastim, jeklenim in nerjavečim pločevinam. - Nastavitev stranskih valjev preko zobniškega sistema. Gsdpfx Ansy Dq Exsfjbl - Pogon zgornjega valja z reduktorjem. - Ročno preklopno ležišče za enostavno odstranjevanje pločevine - Mobilna upravljalna konzola - Oprema za konično upogibanje

Stanje: novo, Sheet length: 2050 mm Sheet thickness: 3 mm Total power requirement: 2.2 kW Weight approx.: 1,500 kg Dimensions (LxWxH): 3,200 x 750 x 1,000 mm Technical Data Gbodpfx Aod Ab H Aenfel Roller diameter: 130 mm Equipment • 3 rollers • Asymmetric roller arrangement – with pre-bending • 2 driven rollers via brake motor • Upper roller can be swung out to the front • Forward/reverse operation • Conical rolling by tilting the rear roller • Movable control panel Operating instructions in GERMAN Catalogue available at the following link:

Stanje: novo, Zustanje novo Dobavni rok cca. 14 - 16 tednov od naročila Država izvora Turčija Cena 81.500 € Leasing obrok 1.540,35 € Maks. debelina pločevine – konstrukcijsko jeklo 8 mm Maks. debelina pločevine – nerjaveče jeklo 5 mm Maks. robni polmer 80 mm Min. robni polmer 10 mm Maks. premer diska 4.500 mm Min. premer diska 720 mm Maks. višina roba 95 (R 80) / 35 (R 25) mm Motor 11 kW Dolžina 4.900 mm Širina 1.700 mm Višina 2.700 mm Teža 4.550 kg Vključuje robne valje za konstrukcijsko jeklo (R25) Gedpfeyq Svkjx Anfsbl Vključuje rezila Ena hitrost (70 min⁻¹) z možnostjo nastavitve največjega navora Pogonski zgornji in spodnji valj z neodvisnimi hidravličnimi motorji ter planetnim reduktorjem Možno obdelovati ravna in konveksna dno Hidravlično nastavljiva višina dna Postopek rezanja in robljenja na istem glavi Stranske podporne valje Upravljanje prek zaslona na dotik Možnosti kot so fiksni in nastavljivi nosilci stožcev, adapterji za manjše premere, rezila za nerjaveče jeklo ali večje hitrosti … po povpraševanju.

Stanje: novo, Condition: new Delivery time: approx. 12 weeks from order Country of origin: Turkey Price: €28,450 Leasing rate: €543.40 Bending length: 1,550 mm Max. bending capacity – construction steel: 7 mm Max. sheet thickness without pre-bending at D=5x top roller: 7 mm Max. sheet thickness without pre-bending at D=1.5x top roller: 4.5 mm Max. sheet thickness with pre-bending at D=5x top roller: 4.5 mm Max. sheet thickness with pre-bending at D=1.5x top roller: 3.5 mm Top roller diameter: 150 mm Bottom roller diameter: 150 mm Side roller diameter: 130 mm Rolling speed: 1.5 / 6 m/min Motor power: 4 kW Length: 3,750 mm Width: 960 mm Height: 1,100 mm Weight: 2,500 kg 4 rollers Top roller driven by hydraulic motor and planetary gearbox, lower rollers driven by gear and cardan shaft Hydraulic adjustment of lower and side rollers Digital display for lower and side roller positions Hardened rollers Cone bending device Hydraulic release of top roller Hydraulic drop-end bearing 2 working speeds Overload protection Mobile control panel Equipment according to CE directive OPTIONS: (Delivery time with options approx. 10 weeks) Infinitely variable rolling speed Hydraulic side support Hydraulic top support NC control IMPORTANT POINTS FOR CONICAL ROLLING: Maximum sheet thickness is 50% of rated capacity Cone length must be max. 30% or more than 60% of roller length Hardened rollers are recommended Gsdpfx Asyb Szhenfebl

Stanje: novo, Shaft diameter: 120 mm Roller diameter: 390 mm Motor power: 15 kW Length: 2000 mm Width: 1650 mm Height: 1900 mm Approx. weight: 4450 kg Standard features • Steel construction • 3 rolls driven by hydromotor and planetary gearbox • Horizontal and vertical operating positions • Mobile control panel Gbjdpfsy Hymqsx Anfol • Hardened standard rolls • Hardened and ground shafts made of high-strength special steel • Digital read-outs (2 units) • 3-axis hydraulic lateral guide rolls • Two-speed operating system • Hydraulic components: Duplomatic (Italy) • Electrical equipment: Siemens (Germany) or Telemecanique (France) • Manufactured in accordance with EC safety regulations (CE marking) and ISO 9000 certification • Operating manual in English Options: NC unit with 7" screen: EUR 7,500 Capacity table: No | Profile Type | Size (mm) | Max (mm) | Min. (mm) | Rolls Type 1 | 125x25 | 1200 | Standard Rolls 2 | 200x50 | 1000 | Standard Rolls 3 | 65x65 | 750 | Standard Rolls 4 | Ø80 | 850 | Optional Rolls 5 | Ø5”x6.35 | 1500 | Optional Rolls 6 | Ø160x4 | 2800 | Optional Rolls 7 | 120x40x4 | 1800 | Optional Rolls 8 | 90x5 | 1800 | Optional Rolls 9 | 120x120x12 | 1200 | Optional Rolls 10 | 100x100x10 | 1200 | Optional Rolls 11 | 100x11 | 800 | Standard Rolls 12 | 100x11 | 1000 | Standard Rolls 13 | 100x11 | 800 | Optional Rolls 14 | UPN 220 | 1000 | Standard Rolls* 15 | UPN 220 | 1200 | Standard Rolls* 16 | IPN 220 | 1000 | Standard Rolls* 17 | HEB 120 / HEA 140 | 1200 | 1200 | Standard Rolls* 18 | UPN 120 | 10000 | Optional Rolls 19 | IPN 160 | 5000 | Optional Rolls 20 | HEB 100 / HEA 120 | 1600 | 4000 | Optional Rolls *Some rows indicate capacities for both max. and min. radii with different profile types. Optional rolls may be required for certain profile forms or dimensions.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2012, Rundstahl 45 mm Vierkantstahl 45 mm Winkelstahl 120 x120 x 12 mm Gesamtleistungsbedarf 5,5 kW Maschinengewicht ca. 1600 kg Raumbedarf ca. 1700 x 950 x 1900 mm Diese Profilstahlschere ist in einem NEUWERTIGEM Zustand und war nur sehr, sehr wenig im Einsatz. Beschreibung: 2x Fußtaster 1x Längenanschlag mit Taster EIGENSCHAFT BESCHREIBUNG / WERT Stanzkraft 65 t Ausladung 305 mm Hub 55 mm Hübe pro min. (bei Hub 20 mm) 25 Blechstärke (max.) Ø 26 x 20 mm Arbeitshöhe 900 mm Schneidleistung 375 x 15 mm 300 x 20 mm Winkelstahl 45° (1 Schenkel) 70 x 70 x 10 mm Gedpfx Anjy Hxq Iefjbl Winkelstahl 90° 120 x 120 x 12 mm Messerlänge 380 mm Rund 45 mm Vierkant 45 mm Materialstärke 10 mm Breite 1.700 mm Tiefe 950 mm Motorleistung 5,5 kW Netzspannung 400 V 50 Hz Höhe 1.880 mm Gewicht 1.600 kg

Stanje: rabljeno, skupna dolžina: 1.000 mm, skupna širina: 750 mm, skupna višina: 1.400 mm, Barva: Siva Lastna teža: 400 kg Gsdpfeypk Ebjx Anfsbl - Na voljo dokumentacija: Ne - CE certifikat: Ne - Upravljanje: Konvencionalno - Število valjev [kos]: 3 - Število pogonskih valjev [kos]: 3 - Moč [kW]: 1,5 - Premer gredi [mm]: 50 - Upornostni moment [cm³]: 6 - Premer zgornjega valja [mm]: 50 - Premer spodnjih valjev [mm]: 50 - Kapaciteta premera okrogle palice [mm]: 35 - Transportne mere: 1000mm x 750mm x 1400mm (d x š x v) - Transportna teža [kg]: 400 kg Finančne informacije DDV: Navedena cena je brez DDV DDV/diferencialna obdavčitev: DDV je odbiten za podjetja Dostava in odkup sta možna kadarkoli za vse iz industrijskega področja Lukas van Rossum

Stanje: rabljeno, Leto izdelave: 2016, skupna dolžina: 4.400 mm, skupna širina: 1.450 mm, skupna višina: 1.300 mm, Poids à vide : 5 200 kg Prix : Sur demande - Année de fabrication : 2016 - Documentation disponible : Oui - Marquage CE : Oui Gbodpfxsyn Aans Anfel - Certificat CE : Non - Numéro de série : 210384 - Commande : Conventionnelle - Entraînement : Hydraulique - Nombre de rouleaux [pcs] : 3 - Nombre de rouleaux entraînés [pcs] : 3 - Puissance [kW] : 7,5 - Épaisseur maximale de tôle [mm] : 6 - Épaisseur maximale de pré-cintrage [mm] : 4 - Largeur de travail maximale [mm] : 3 100 - Diamètre du rouleau supérieur [mm] : 210 - Diamètre des rouleaux inférieurs [mm] : 210 - Options : Cintrage conique, Affichage numérique - Dimensions de transport : 4 400mm x 1 450mm x 1 300mm (L x l x h) - Poids de transport [kg] : 5 200kg - Nombre de colis de transport [pcs] : 1 Informations financières TVA : Le prix indiqué s’entend hors TVA TVA/régime de la marge : TVA déductible pour les professionnels Livraison et reprise possibles à tout moment pour tout équipement industriel Lukas van Rossum

Stanje: rabljeno, Leto izdelave: 2003, skupna dolžina: 3.230 mm, skupna širina: 1.150 mm, skupna višina: 1.120 mm, Barva: Siva Lastna teža: 1.400 kg Cena: Na zahtevo - Leto izdelave: 2003 - Dokumentacija na voljo: Da - CE oznaka prisotna: Da - CE certifikat prisoten: Da - Serijska številka: 220281 - Upravljanje: Konvencionalno - Pogon: Mehanski - Število valjev [kos]: 3 - Število pogonskih valjev [kos]: 3 - Moč [kW]: 2,2 - Največja debelina pločevine [mm]: 2 - Največja debelina pri pred-upogibu [mm]: 2 - Največja delovna širina [mm]: 2050 - Premer zgornjega valja [mm]: 110 - Premer spodnjih valjev [mm]: 110 - Hitrost upogibanja [mm/min]: 3 - Transportne mere: 3230 mm x 1150 mm x 1120 mm (d x š x v) - Transportna teža [kg]: 1400 kg - Število transportnih paketov [kos]: 1 Gbodpfx Anox Tuy Eofol Finančne informacije DDV: Navedena cena ne vključuje DDV DDV/obdavčitev razlike: DDV je odbiten za podjetja Dostava in odkup možna kadarkoli za vse industrijske izdelke Lukas van Rossum

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2015, Profilna valjarka Sahinler HPK 80 je težka hidravlična profilna valjarka s 3 pogonskimi valji za natančno upogibanje jeklenih profilov, cevi in kvadratnih cevi. Stroj je primeren za industrijsko uporabo v kovinski konstrukciji in strojništvu ter nudi robustno konstrukcijo z visoko zmogljivostjo upogibanja in zanesljivo ponovljivo natančnostjo. Pogonski valji: 3 Gjdpfjy Rrh Iox Anfebl Premer osi: 80 mm Premer valja: 245 mm Moč motorja: 4,0 kW Napajanje: 400V / 3-fazno Delovna hitrost: cca 6–7 m/min Delovni položaj: možno uporabiti vodoravno in navpično

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2023, RM Super Rain 890 GX 110/550 je kolutni namakalni sistem iz serije Super Rain / GX italijanskega proizvajalca RM Irrigation. Oznaka 110/550 pomeni cev s premerom 110 mm in dolžino 550 m. Namenjen je za namakanje velikih kmetijskih površin. Gbodpfxexgha No Anfol

Stanje: novo, Condition: new Delivery time: approx. 14-16 weeks from order Country of origin: Turkey Price: €48,000 Leasing rate: €916.80 Max. sheet thickness – mild steel: 6 mm Max. sheet thickness – stainless steel: 4 mm Max. beading radius: 70 mm Max. blank diameter: 4,000 mm Min. blank diameter: 550 mm Motor: 8.75 kW Length: 4,250 mm Width: 720 mm Height: 2,000 mm Weight: 2,015 kg Easy operation via mobile control panel with push buttons Manufactured according to EC safety guidelines and CE marked A set of beading rolls is included. Radius selectable. Min. diameter when cutting: 600 mm (with adapter for small diameters: 400 mm) Min. diameter when beading: 550 mm (with adapter for small diameters: 350 mm) Includes one set of cutting knives Rotational speed: 70 rpm with adjustable max. torque Upper and lower beading roll drive via planetary gear Hydraulic adjustment for processing both flat and dished parts Cutting and beading with the same head Options such as fixed and adjustable cone holders, adapters for small diameters, cutting wheels for stainless steel, or increased speed ... upon request Gsdpfx Aeyq Spwsnfjbl

Stanje: dober (rabljeno), Leto izdelave: 1997, Druck 100 t Hub 300 mm Tischfläche 500 x 1520 mm Ständerdurchgang zwischen den Führungen 1520 mm Einbauhöhe 680 mm Druck max. 244 bar Werkzeuggewicht max. 270 kg Zustellgeschwindigkeit 8.0 mm/sec Arbeitsgeschwindigkeit 5.0 mm/sec Rückzugsgeschwindigkeit 10.0 mm/sec Ölinhalt 90.0 l Spannung 400 V Gesamtleistung 7.5 kW Maschinengewicht ca. 2700 kg Raumbedarf ca. 2630 x 1000 x 2350 mm aktueller Neupreis ca. 18.000 Euro Sonderpreis auf Anfrage laut Vor-Abgeber selten im Einsatz gewesen Ausstattung: - robuste elekro-hydraulische Werkstatt-/Biegepresse * links + rechts geführt - mit fixen Arbeits-Zylinder - Preßtiefe durch Nocken einstellbar - Arbeitstisch höhenverstellbar - 2x Arretierbolzen für die Tischfixierung - 3x Wege-Ventil Vorlauf-Leerlauf-Rücklauf - stufenlose Einstellung vom Arbeitsdruck - 1x freibewegliche 2-Hand Bedienung Gsdpfxoy Dh Nzj Anfobl - originale Bedienungsanleitung

Stanje: novo, Condition: New Delivery time: approx. 12 weeks from order Country of origin: Turkey Price: €15,900 Lease rate: €305.28 Shaft diameter: 50 - 60 mm Top roller diameter: 180 mm Roller diameter: 180 mm Lower roller diameter: 180 mm Driven rollers: 3 Gbsdpfeyn R E Sox Anfel Motor power: 3.75 kW Speed: 6 m/min Flat bar upright (cross-section / min. diameter): 60x10 mm / 500 mm; 20x5 mm Flat bar flat (cross-section / min. diameter): 80x20 mm / 500 mm; 50x5 mm Square bar (cross-section / min. diameter): 32x32 mm / 400 mm; 12x12 mm Round bar (cross-section / min. diameter): Ø 35 mm / 350 mm; Ø 10 mm Tube (cross-section / min. diameter): Ø 60x2 mm / 600 mm; Ø 15 mm Rectangular tube upright (cross-section / min. diameter): 50x25x3 mm / 450 mm; 20x1 mm Square tube (cross-section / min. diameter): 45x3 mm / 600 mm; 20x2 mm Angle iron legs out (cross-section / min. diameter): 60x60x6 mm / 650 mm; 30x3 mm Angle iron legs in (cross-section / min. diameter): 50x50x5 mm / 550 mm; 30x3 mm UPN legs out (cross-section / min. diameter): UPN 80 / 600 mm; UPN 30 / ... UPN legs in (cross-section / min. diameter): UPN 65 / 600 mm; UPN 30 / ... IPN flat (cross-section / min. diameter): IPN 80 / 600 mm Length: 1200 mm Width: 850 mm Height: 1200 mm Weight: 955 kg 3 driven rollers (brake motor) Hardened drive shafts Hydraulic adjustment of the two lower rollers Hardened universal rollers Lateral straightening rollers, manually adjustable in 3 axes Usable in horizontal and vertical position Digital display for lower roller positions Machine and equipment compliant with CE regulations Operating manual in GERMAN and ENGLISH

Stanje: novo, Condition: new Delivery time: approx. 10 weeks from order Country of origin: Turkey Price: €55,900 Leasing rate: €1,056.51 Bending length: 3,100 mm Max. bending capacity (mild steel): 9 mm Max. sheet thickness without pre-bending at D=5x top roller: 8 mm Max. sheet thickness without pre-bending at D=1.5x top roller: 7 mm Max. sheet thickness with pre-bending at D=5x top roller: 7 mm Gbsdpfx Aeyb Sz Ionfol Max. sheet thickness with pre-bending at D=1.5x top roller: 5 mm Top roller diameter: 245 mm Bottom roller diameter: 245 mm Side roller diameter: 180 mm Rolling speed: 1.5 / 6 m/min Motor power: 7.5 kW Length: 5,350 mm Width: 1,600 mm Height: 1,470 mm Weight: 6,850 kg 4 rollers Top roller drive via hydromotor and planetary gearbox, bottom roller drive via gear and cardan shaft Hydraulic adjustment of bottom and side rollers Digital readout for bottom and side roller positions Hardened rollers Cone bending device Hydraulic relief for top roller Hydraulic drop-end bearing 2 working speeds Overload protection Mobile control panel CE-compliant equipment OPTIONS: Infinitely variable rolling speed Hydraulic side support Hydraulic top support NC control IMPORTANT NOTES FOR CONICAL BENDING: The max. sheet thickness is 50% of the nominal capacity The cone length must be a maximum of 30% or more than 60% of the roller length Hardened rollers are recommended

Stanje: novo, Condition: new Delivery time: approx. 10 weeks from order Country of origin: Turkey Price: €48,100 Leasing rate: €918.71 Bending length: 2,550 mm Max. bending capacity (mild steel): 9 mm Max. sheet thickness without pre-bending at D=5x top roll: 9 mm Max. sheet thickness without pre-bending at D=1.5x top roll: 7 mm Max. sheet thickness with pre-bending at D=5x top roll: 7 mm Max. sheet thickness with pre-bending at D=1.5x top roll: 5 mm Top roll diameter: 220 mm Bottom roll diameter: 220 mm Side roll diameter: 160 mm Rolling speed: 1.5 / 6 m/min Motor power: 5.5 kW Length: 4,900 mm Width: 1,150 mm Height: 1,250 mm Weight: 4,600 kg 4-roll system Top roll drive via hydraulic motor and planetary gearbox, bottom rolls driven by gears and cardan shaft Hydraulic adjustment of bottom and side rolls Digital display for bottom and side roll positions Hardened rolls Cone bending device Hydraulic release of the top roll Hydraulic drop end 2 working speeds Overload protection Mobile control panel Equipment complies with CE regulations OPTIONS: Infinitely variable rolling speed Hydraulic side support Gsdpfxeyb Sywj Anfjbl Hydraulic top support NC control IMPORTANT POINTS FOR CONICAL BENDING: The max. sheet thickness is 50% of the nominal capacity The cone length may be max. 30% or must be more than 60% of the roll length Hardened rolls are recommended

Stanje: novo, Condition: new Delivery time: approx. 10 weeks from order Country of origin: Turkey Price: €49,900 Leasing rate: €953.09 Bending length: 2050 mm Max. bending capacity (mild steel): 13 mm Max. sheet thickness, pre-bending at D=5x top roll: 13 mm Max. sheet thickness, pre-bending at D=1.5x top roll: 10 mm Max. sheet thickness, with pre-bending at D=5x top rolls: 10 mm Max. sheet thickness, with pre-bending at D=1.5x top roll: 8 mm Top roll diameter: 245 mm Bottom roll diameter: 245 mm Side roll diameter: 180 mm Rolling speed: 1.5 / 6 m/min Motor power: 7.5 kW Length: 4300 mm Width: 1600 mm Height: 1470 mm Weight: 5450 kg 4 rolls Top roll drive by hydraulic motor and planetary gearbox, bottom roll drive by gear and cardan shaft Hydraulic adjustment of bottom and side rolls Digital display for bottom and side roll positions Hardened rolls Cone bending device Gsdpfxjyb Sydj Anfebl Hydraulic relief of the top roll Hydraulic drop-end bearing 2 working speeds Overload protection Mobile control panel Equipment compliant with CE specifications OPTIONS: Stepless variable rolling speed Hydraulic side support Hydraulic top support NC control IMPORTANT POINTS FOR CONICAL BENDING: The max. sheet thickness is 50% of the nominal capacity The cone length must be max. 30% or more than 60% of the roll length Hardened rolls are recommended

Stanje: novo, Condition: New Delivery time: approx. 10 weeks from order Country of origin: Turkey Price: €31,600 Leasing rate: €603.56 Bending length: 2,050 mm Max. bending capacity - mild steel: 6 mm Max. plate thickness without pre-bending at D=5x top roll: 6 mm Max. plate thickness without pre-bending at D=1.5x top roll: 4 mm Max. plate thickness with pre-bending at D=5x top roll: 4 mm Max. plate thickness with pre-bending at D=1.5x top roll: 3 mm Top roll diameter: 150 mm Lower roll diameter: 150 mm Side roll diameter: 130 mm Rolling speed: 1.5 / 6 m/min Motor power: 4 kW Length: 4,250 mm Width: 960 mm Height: 1,100 mm Weight: 2,800 kg 4 rolls Top roll driven by hydromotor and planetary gearbox, lower roll driven by gear and cardan shaft Hydraulic adjustment of the lower and side rolls Digital display for lower and side roll positions Gjdpfxoyb Szbo Anfsbl Hardened rolls Conical bending device Hydraulic top roll release Hydraulic drop-end bearing 2 working speeds Overload protection Movable control panel Equipment in accordance with CE regulations OPTIONS: Infinitely variable rolling speed Hydraulic side support Hydraulic top support NC control IMPORTANT POINTS FOR CONICAL ROLLING: Max. plate thickness is 50% of the nominal capacity The cone length may be max. 30% or must be more than 60% of the roll length Hardened rolls are recommended

Stanje: novo, Condition: New Delivery time: approx. 10 weeks from order Country of origin: Turkey Price: €57,000 Leasing rate: €1,077.30 Bending length: 2,550 mm Max. bending capacity - structural steel: 13 mm Max. plate thickness without pre-bending at D=5x top roll: 13 mm Max. plate thickness without pre-bending at D=1.5x top roll: 10 mm Max. plate thickness with pre-bending at D=5x top roll: 10 mm Max. plate thickness with pre-bending at D=1.5x top roll: 8 mm Top roll diameter: 260 mm Lower roll diameter: 260 mm Side roll diameter: 200 mm Rolling speed: 1.5 / 6 m/min Motor power: 7.5 kW Length: 4,800 mm Width: 1,600 mm Height: 1,550 mm Weight: 6,800 kg 4 rolls Top roll driven by hydraulic motor and planetary gearbox, lower roll driven by gear and cardan shaft Hydraulic adjustment of lower and side rolls Digital display for lower and side roll positions Hardened rolls Conical bending device Hydraulic top roll relief Hydraulic drop-end bearing Gjdpeyb Sy Rofx Anfebl 2 working speeds Overload protection Mobile control panel Equipment in accordance with CE regulation OPTIONS: Infinitely variable rolling speed Hydraulic side support Hydraulic top support NC control IMPORTANT POINTS FOR CONICAL BENDING: Maximum plate thickness is 50% of nominal capacity The cone length may be max. 30% or must be more than 60% of the roll length Hardened rolls are recommended

Stanje: novo, Condition: new Delivery time: approx. 10 weeks from order Country of origin: Turkey Price: €46,300 Leasing rate: €884.33 Bending length: 2,050 mm Max. bending capacity – mild steel: 11 mm Max. plate thickness without pre-bending at D=5x top roll: 11 mm Max. plate thickness without pre-bending at D=1.5x top roll: 9 mm Max. plate thickness with pre-bending at D=5x top roll: 9 mm Max. plate thickness with pre-bending at D=1.5x top roll: 7 mm Top roll diameter: 220 mm Bottom roll diameter: 220 mm Side roll diameter: 160 mm Rolling speed: 1.5 / 6 m/min Motor power: 5.5 kW Length: 4,400 mm Width: 1,150 mm Height: 1,250 mm Weight: 4,080 kg 4 rolls Top roll driven by hydraulic motor and planetary gearbox; bottom roll driven by gear and cardan shaft Hydraulic adjustment of bottom and side rolls Digital display for bottom and side roll positions Hardened rolls Cone bending device Hydraulic top roll release Hydraulic drop-end bearing 2 working speeds Overload protection Mobile control panel Equipment compliant with CE regulations OPTIONS: Infinitely variable roll speed Hydraulic side support Hydraulic top support NC control IMPORTANT POINTS FOR CONICAL ROLLING: Gbedpfxjyb Szuo Anfsl Max. plate thickness is 50% of nominal capacity Cone length must be max. 30% or more than 60% of roll length Hardened rolls are recommended

Stanje: novo, Condition: New Delivery time: approx. 10 weeks from order Country of origin: Turkey Gbedpfx Ansyb Sykefjl Price: €52,700 Leasing rate: €996.03 Bending length: 2550 mm Max. bending capacity – structural steel: 10 mm Max. sheet thickness without pre-bending at D=5x top roll: 10 mm Max. sheet thickness without pre-bending at D=1.5x top roll: 8 mm Max. sheet thickness with pre-bending at D=5x top roll: 8 mm Max. sheet thickness with pre-bending at D=1.5x top roll: 6 mm Top roll diameter: 245 mm Bottom roll diameter: 245 mm Side roll diameter: 180 mm Rolling speed: 1.5 / 6 m/min Motor power: 7.5 kW Length: 4800 mm Width: 1600 mm Height: 1470 mm Weight: 6170 kg 4 rollers Top roll drive via hydraulic motor and planetary gearbox; bottom roll driven via gears and cardan shaft Hydraulic adjustment of bottom and side rolls Digital display for position of bottom and side rolls Hardened rolls Cone bending device Hydraulic release of top roll Hydraulic drop-end bearing 2 working speeds Overload protection Mobile control panel Equipment conforms to CE regulations OPTIONS: Infinitely variable rolling speed Hydraulic side support Hydraulic top support NC control IMPORTANT POINTS FOR CONICAL BENDING: Max. sheet thickness is 50% of the rated capacity Cone length must be max. 30% or more than 60% of roll length Hardened rolls are recommended

Stanje: novo, Leto izdelave: 2026, Širina traku 50,0 mm Dolžina traku 940 mm Hitrost traku 3,0 - 22 m/min Število obratov 1450 obr/min Premer cevi 16,0 - 114 mm Radij 180° Gbsdpjxaaxqsfx Anfjl Skupna priključna moč 4,75 kW Teža stroja ca. 265 kg Dimenzije D-Š-V 1000 x 750 x 1300 mm Oprema: - Elektromotorni / stacionarni tračni brusilnik za cevi - Avtomatsko podajanje materiala z ločenim pogonskim motorjem - Rezervni brusni trakovi - Brezstopenjsko nastavljanje hitrosti - Ročna nastavitev napetosti cevi - Poliranje ukrivljenih cevi do 180° (kot) - Možno ročno delo brez podajanja - CE oznaka / Izjava o skladnosti

Stanje: novo, Condition: New Delivery time: approx. 12 weeks from order Country of origin: Turkey Price: €11,800 Leasing rate: €226.56 Shaft diameter: 60 mm Upper roll diameter: 215 mm Lower roll diameter: 215 mm Driven rolls: 3 Motor power: 1.5 kW Speed: 4 m/min Flat bar upright (section / min. diameter): 80x20 mm / 1200 mm; 40x10 mm Flat bar flat (section / min. diameter): 120x25 mm / 600 mm; 50x mm Square steel (section / min. diameter): 50x50 mm / 800 mm; 20x20 mm Round steel (section / min. diameter): Ø 50 mm / 800 mm; Ø 20 mm Tube (section / min. diameter): Ø 100x2 mm / 1600 mm; Ø 6 mm Gbsdjwiq S Nepfx Anfjl Rectangular tube upright (section / min. diameter): 80x40x3 mm / 1400 mm; 40x mm Rectangular tube square (section / min. diameter): 70x3 mm / 1600 mm; 40x2 mm Angle steel, leg outside (section / min. diameter): 70x70x7 mm / 1000 mm; 40x mm Angle steel, leg inside (section / min. diameter): 70x70x7 mm / 1200 mm; 40x mm Length: 1000 mm Width: 1400 mm Height: 1650 mm Weight: 950 kg 3 driven rolls (brake motor) Hardened drive shafts Hydraulic adjustment of the top roll Hardened universal rolls Side straightening rollers in one axis, adjustable manually Usable horizontally and vertically Foot pedal for forward and reverse operation Machine and equipment conform to CE regulations Operating manual in GERMAN and ENGLISH