Renner Reko H 710/150 nakup rabljenega (63.561)

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, obratovalne ure: 2 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 002331512500001478, tlak (maks.): 14 letvica, Rabljen batni kompresor REKO H 710/150, 14 bar vključno s števcem delovnih ur vključno z rezervoarjem za stisnjen zrak 150 litrov Delovne ure: 6,0 h Leto izdelave: 2025 Najvišji tlak: 14 bar Dovod zraka pri 14 bar: 500 l/min Nazivna moč: 4,0 kW Omrežna napetost: 400 V Valji: 2 Stopnje: 2 Hitrost kompresorja: 785 min⁻¹ Raven hrupa: 72 dB(A) Rezervoar za stisnjen zrak: 150 litrov Dimenzije: 1345 x 457 x 1112 mm Teža: 135 kg Itodsypm Sdepfx Al Nsf Vedno imamo na zalogi širok izbor novih in rabljenih kompresorjev!

Stanje: kot nova (razstavni stroj), Leto izdelave: 2024, obratovalne ure: 2 h, tlak (maks.): 14 letvica, REKO H 510/150 piston compressor 14 bar including operating hours counter including 150 liter compressed air tank Operating hours: 2.0 h Year of manufacture: 2024 Iodpfjvr Eicex Al Njtf Maximum pressure: 14 bar Delivery rate at 12 bar: 360 l/min Rated power: 3.0 kW Mains voltage: 400 V Compressor speed: 1200 rpm Compressed air tank: 150 liters Dimensions: 1345 x 457 x 1054 mm Weight: 115 kg We always have a large selection of new and used compressors in stock!

Stanje: kot nova (razstavni stroj), Leto izdelave: 2022, Funkcionalnost: popolnoma funkcionalen, moč: 4 kW (5,44 KM), volumenski pretok: 0,57 m³/h, obratovalni tlak: 11 letvica, tlak (maks.): 11 letvica, vrsta hlajenja: zrak, Oprema: Na voljo je tipska ploščica, dokumentacija / priročnik, Renner REKO 700D/90 - Demonstration Unit Iodpfx Asu Ttlcol Netf Mobile Piston Compressor with Tank Standard features include all safety fittings as well as an electrical connection cable with plug, and a Condor pressure switch equipped with an operating hours counter. The compressed air tank is fitted with a safety valve, tank pressure gauge, and condensate drain valve. Fully automatic operation via pressure switch with start-up relief, motor protection, and on/off switch. Supplied with advanced equipment for versatile use – vibration-isolating mounts for stationary installation are included. Equipped with V-belt drive, 2 inline cylinders for exceptionally smooth operation. Low compressor speed – reduces wear on compressor components, lowers noise levels, and minimizes vibrations. Optional at extra cost: Filter pressure regulator for regulated and purified compressed air (condensate, dirt, oil) available for tank sizes from 50 liters and up. With equipment power supply and air outlet via safety coupling NW 7.2. Intake capacity: 727 l/min Effective delivery rate: 570 l/min Nominal power: 4.0 kW Voltage: 400 V Max. pressure: 11 bar Cylinders/stages: 2/2 Speed: 1000 rpm Sound level: 95 dB(A) Compressed air tank: 90 l Dimensions L x W x H: 1030 x 483 x 1100 mm Weight: 128 kg

Stanje: zelo dobro (rabljeno), Leto izdelave: 2005, moč: 225 kW (305,91 KM), vrsta goriva: dizel, vrsta hlajenja: voda, Regularly maintained Volvo Diesel Kagema firefighting water pump for sale in like-new condition, without the pump unit. Operating hours: 298 Inspection and oil change performed at all maintenance intervals, regardless of operation. Manufacturer: Kagema DPA Engine: Volvo Penta TWD 710 V 218 kW / 296 HP 6-cylinder diesel engine Iedpfxjhfl Dmj Al Notf Specifications: Manufacturer: Volvo Penta Model: TWD 710V Spec No.: 868725 Serial Number: 2071093240 Power: 225 kW / 304 HP Speed: 2450 rpm Fuel: Diesel Length: 330 cm Width: 120 cm Height: 220 cm Tank capacity: 400 liters Water delivery approx.: 800–900 m³ Pressure: 6.5 bar Pump type: KSR-MXN 150-315 We purchase industrial equipment and machinery. Wide selection of used machines and industrial plants.

Leto izdelave: 2022, stanje: kot nova (razstavni stroj), REKO 510-B Auxiliary Compressor (Piston Compressor) Including operating hour meter Including 3-liter compressed air tank Operating hours: 0.75 h Year of manufacture: 2022 Maximum pressure: 10 bar Delivery rate: 380 l/min Rated power: 3.0 kW Mains voltage: 400 V Compressor speed: 1200 rpm Compressed air tank: 3 liters Dimensions: 735 x 620 x 698 mm Weight: 45 kg We always have a wide selection of new and used compressors in stock! Isdpfx Ajpyhpdol Njtf

Leto izdelave: 2017, stanje: skoraj kot novo (rabljeno), Used RENNER REKO 550/50VE Air Compressor 10 bar with Petrol Engine For use without a power supply (e.g. breakdown service vehicles or mobile tyre service) The compressor is used, built in 2017, and has 50 operating hours. The petrol-driven, robust piston compressors offer you not only the usual advantages of RENNER systems but also, above all, flexibly available compressed air on construction sites, in service vehicles, and for many other applications "without a power socket". They guarantee a reliable compressed air supply independent of location. The small version is mobile and can be repositioned quickly thanks to the ergonomic handle, while the larger variant, with its compact design, can easily be moved with a pallet truck or forklift and loaded onto vehicles. VE = Electric Start. Please note: supplied without battery. Technical data: Intake capacity: 550 l/min Effective output: 400 l/min Petrol engine: 3.6 kW Honda unit with 4.8 HP Max. pressure: 10 bar Cylinders/stages: 2/1 Speed: 1,400 rpm Sound level: 98 dB(A) Air receiver: 50 l Dimensions (L x W x H): 810 x 460 x 830 mm Itedpsd H Dr Sjfx Al Nef Weight: 70 kg Visit our store in Erlangen. We have a large selection of new and used compressors.

Stanje: rabljeno, Workbench, Work Table, Assembly Bench - Width: 1500 mm - Depth: 710 mm - Height: 890 mm - Worktop thickness: 50 mm - Drawer: 1 - Door: 1 - Shelves: 4 Itodpfjd R N H Sjx Al Nsf - Weight: 103 kg

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, CNC-obdelovalni center BUSELLATO S-MASTER H150 Rabljeni stroj 3 osi Itjdpfxjyfudgo Al Njf Delovno stanje: zelo dobro CE oznaka: Da napetost 380/50 Sestava: 1. Vrtalna enota (os X in Y), neodvisne vertikalne in horizontalne glave 2. Vertikalni rezkar 3. Horizontalni rezkar 4. Enota za žagin list Uporabna velikost mm: 3200 x 1350 Uporabne dimenzije (delovno območje): 3200 x 1350 mm Pomiki osi: X = 4000 mm Y = 1430 mm Z = 265 mm Maksimalna debelina plošče: 120 mm Maksimalna razdalja plošč: 150 mm Priključena moč: 16 kW Teža stroja: 4500 kg

Stanje: zelo dobro (rabljeno), Leto izdelave: 2003, obratovalne ure: 21.200 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 190332, Oprema: dokumentacija / priročnik, From 01.07.2025, used machines can also be claimed for tax purposes with a special depreciation of 30% per year. Injection Moulding Machine 3-color or 2-color (the 3rd unit can be deactivated) (horizontal/vertical/3rd unit in L-position with safety enclosure) ##### Can also be converted to 2-color operation ##### Immediately available from our warehouse in Hanover Make: Arburg Model: 420C 1000-150/150/60 Year of manufacture: 2003 Machine number: 190332 Control: Selogica Itedpfx Alogrzh Eo Nef Operating hours: only 21,200 h +++++Clamping Unit+++++ Control Selogica Clamping Force 1000 kN / 100 t Tie Bar Distance 420 x 420 mm Mounting Plates 795 x 795 mm Mold Installation Height 300 mm Max. Plate Distance 950 mm Ejector Stroke/Force 225 mm / 66 kN Clamping Unit: hydraulic ++++ Injection Unit 1 (150 unit) ++++ Screw Diameter: 15 mm (high-wear-resistant design) Shot Volume: 17 cc Shot Weight: 15 g Injection Pressure: 2750 bar ++++ Injection Unit 2 (150 unit) ++++ Screw Diameter: 15 mm (high-wear-resistant design) Shot Volume: 17 cc Shot Weight: 15 g Injection Pressure: 2750 bar ++++ Injection Unit 3 (60 unit) ++++ Screw Diameter: 15 mm (high-wear-resistant design) Shot Volume: 17 cc Shot Weight: 15 g Injection Pressure: 2080 bar Extras 1 ALLROUNDER 420 C 1000 - 150 / 150 / 60 1 vertical injection unit mounted on carriers for the 2nd injection unit (instead of on the clamping bars), manually operated, working position adjustable between 70 and 250 mm VE-404/02 2 x core pull 1 open nozzle 15 mm, wear-resistant, without heating band (1st injection unit 150) VE-902/00 1 Technology Level 2 – servo-controlled hydraulic system with two variable pumps for controlled machine movements, with stroke-dependent controlled target ramps. The buildup of clamping force is programmable and controlled. The clamping force is held servo-controlled via the second pump. The buildup of nozzle force is programmable. The nozzle force can be set manually; the value is electronically regulated. 1 Technology Level 3 hydraulic system with 3 variable pumps for simultaneous movements of the main axes and faster movements of the auxiliary axes. For 2-component machines, as a hydraulic unit for the 2nd injection unit (Technology Level 2 required, VE 132/03) VE-130/40 1 heating band for open nozzle VE-320/00 1 injection unit 150 for vertical injection into the mold parting line for 2-component processing VE-136/02 1 position-controlled screw with control valve on the injection unit, incl. controlled back pressure, nozzle force adjustable manually VE-561/20 1 position-controlled screw with control valve for multi-component machines—for injection unit 2 VE-561/30 1 injection unit 60 for horizontal injection into the mold parting line as the 3rd injection unit for multi-component processing (L-position) VE-906/00 1 for VE 906/00: Injection unit 60 in L-position: unit lowered by 70 mm, incl. special parting plane full safety guard VE-907/00 1 plasticizing cylinder kit 15 mm (without nozzle), with forward feed and pressure reducing valve, high-wear-resistant design with sintered metal non-return valve (L-position) VE-908/00 1 open nozzle 15 mm, wear-resistant, without heating band (L-position) VE-909/00 1 nozzle tip with radius 15 (L-position) VE-910/00 1 heating band for open nozzle (L-position) VE-911/00 1 position-controlled screw for the third injection unit

Stanje: dober (rabljeno), moč: 220 kW (299,12 KM), vrsta goriva: dizel, barva: rumena, Leto izdelave: 2016, obratovalne ure: 9.120 h, Oprema: klimatska naprava, Technische Informationen Fahrgestellform: Knick Leergewicht: 26.100 kg Motormarke: D13J Funktionell Inhalt der Ladeschaufel: 5 m³ CE-Kennzeichnung: ja Zustand Technischer Zustand: gut Optischer Zustand: gut Identifikation Seriennummer: VCEL150HH00005075 Weitere Informationen Zustand der Bereifung vorne: 100 Zustand der Bereifung hinten: 100 Emissionsniveau: Stage IV / Tier IV final Iodpsyzl Ezefx Al Nstf Lieferbedingungen: EXW Transportabmessungen (L x B x H): 9,1x3,2x3,9 Produktionsland: SE Weitere Informationen Wenden Sie sich an Jeroen Heindryckx, Bart Apers oder Matthias Eyckmans, um weitere Informationen zu erhalten. = Weitere Optionen und Zubehör = - Automatisches Schmiersystem -> Auto-Schmiersystem - Batterietrennschalter - CDC - Joystick-Steuerung - Kotflügel - Maschinensteuerungssystem - Printer - Standard Tieflöffel

Stanje: novo, 15.06 linear meters of shelving racks, 60cm deep, workshop racks, warehouse shelving, large compartment racks, hand storage, shelving racks, small parts storage. Specifications: - Height: approx. 200 cm - Depth: approx. 60 cm - Length: approx. 15.06 linear meters Rack package, 15.06 linear meters, consisting of: - 16 uprights, approx. 200 x 60 cm, disassembled (incl. 2 feet & 2 end caps each) - 75 shelves, approx. 100 x 60 cm - 300 shelf brackets - 16 diagonal braces, 1176 mm (for cross bracing) - 16 turnbuckles (for cross bracing) - Manufacturer: META CLIP - Load capacity: 150 kg per shelf with evenly distributed load - Levels: 5 storage levels - Surface: sendzimir galvanized - New stock available for immediate delivery - Made in Germany - 100% quality at the best price Frame pre-assembly can be carried out by us for a small surcharge of €2/net per piece. -- IMMEDIATELY AVAILABLE IN MULTIPLE QUANTITIES -- Price: €2,116.00 net plus legally applicable VAT You will receive an invoice with VAT shown separately Transport: Delivery can be arranged by our partner forwarding agent on request; costs are dependent on postal code. Installation: Iodpfoy D I Hasx Al Njtf Our trained personnel are available to assist you with the professional installation and dismantling of your equipment if required. Our recommendation: Let us know your requirements... We are happy to support you in realizing your projects, from planning and ordering to installation.

Stanje: novo, 60.06 linear meters of shelf racks, 60 cm deep – workshop shelving, storage racks, manual storage, boltless shelving, small parts storage Specifications: - Height: approx. 200 cm Itodjy D I D Sjpfx Al Nsf - Depth: approx. 60 cm - Length: approx. 60.06 linear meters Rack package 60.06 lfm, consisting of: - 61 uprights, approx. 200 x 60 cm, disassembled (incl. 2 x foot plates & 2 x end caps each) - 300 shelves, approx. 100 x 60 cm - 1200 shelf supports - 61 cross braces, 1176 mm (for cross bracing) - 61 turnbuckles (for cross bracing) - Manufacturer: META CLIP - Load capacity: 150 kg per shelf with evenly distributed load - Levels: 5 storage levels - Finish: Sendzimir galvanized - New stock, immediately available - Made in Germany - 100% quality at the best price Optional: Pre-assembly of the frames can be carried out by us for a small additional charge of €2/net per piece. -- IMMEDIATELY AVAILABLE IN MULTIPLE QUANTITIES -- Price: €8,000.00 net plus legally applicable VAT You will receive an invoice with VAT shown separately. Transport: Delivery is available on request by our partner forwarding agent, shipping costs are postcode-dependent. Assembly: Our trained staff are also available to assist with professional assembly and dismantling of your equipment if required. Our recommendation: Please let us know your requirements... We are happy to assist you with your projects, from planning and ordering through to assembly.

Stanje: novo, 60.06 linear meters of shelf racks, 40 cm deep: workshop shelving, storage shelves, wide span shelves, hand storage, shelving for small parts. Specifications: - Height: approx. 200 cm - Depth: approx. 40 cm - Length: approx. 60.06 linear meters Shelf rack package 60.06 lm consisting of: - 61 uprights approx. 200 x 40 cm, disassembled (incl. 2 feet & 2 top caps each) - 300 shelves approx. 100 x 40 cm - 1,200 shelf supports - 61 diagonal braces 1,176 mm (for cross bracing) - 61 turnbuckles (for cross bracing) - Manufacturer: META CLIP - Load capacity: 150 kg per shelf with evenly distributed load - Levels: 5 storage levels - Surface: sendzimir galvanized - New stock from warehouse - Made in Germany - 100% quality at the best price Frame pre-assembly can be carried out by us for a small extra charge of €2/net per unit. -- IMMEDIATELY AVAILABLE IN MULTIPLE QUANTITIES -- Price: €5,610.00 net plus legally applicable VAT You will receive an invoice with VAT shown separately. Transport: Delivery is arranged by our partner freight forwarder upon request, costs depend on postal code. Assembly: Iodpfxoy D I Dro Al Notf Our trained staff is available to provide professional assembly and disassembly of your warehouse equipment if required. Our recommendation: Let us know your requirements... We are happy to support you with your project—from planning and ordering through to installation.

Stanje: novo, 30.06 linear meters of shelving racks, 40 cm deep, workshop racks, storage racks, wide-span shelving, manual storage, shelving racks, small parts storage. Specifications: Iedpfxoy D I Dls Al Njtf - Height: approx. 200 cm - Depth: approx. 40 cm - Length: approx. 30.06 linear meters Rack package 30.06 lfm consisting of: - 031 uprights approx. 200 x 40 cm, disassembled (incl. 2 x base plates & 2 x end caps per upright) - 150 shelves approx. 100 x 40 cm - 600 shelf supports - 031 cross braces 1176 mm (for bracing) - 031 turnbuckles (for bracing) - Manufacturer: META CLIP - Load capacity: 150 kg per shelf with evenly distributed load - Levels: 5 storage levels - Finish: sendzimir galvanized - New goods ex stock - Made in Germany - 100% quality at the best price Pre-assembly of frames can be carried out by us for a small surcharge of €2/net per piece. -- IMMEDIATELY AVAILABLE IN MULTIPLE UNITS -- Price: €3,661.00 net plus legally applicable VAT You will receive an invoice with VAT statement. Transport: Delivery can be arranged via our partner forwarding company on request, shipping costs are postcode-dependent. Assembly: Our trained staff are available to provide professional assembly and disassembly of your facility on request. Our recommendation: Let us know your requirements… We are happy to assist you in realizing your projects, from planning to ordering and assembly.

Stanje: novo, 15.06 linear meters of shelving racks, 40 cm deep, workshop shelves, storage racks, manual storage, boltless racking, small parts storage Specifications: - Height: approx. 200 cm - Depth: approx. 40 cm - Length: approx. 15.06 linear meters Itedpfxoy D I A Uj Al Njf Shelf package 15.06 linear meters, consisting of: - 016 x upright frames approx. 200 x 40 cm, disassembled (incl. 2 x feet & 2 x end caps per upright). - 075 x shelves approx. 100 x 40 cm. - 300 x shelf supports. - 016 x cross braces 1176 mm (for diagonal bracing). - 016 x turnbuckles (for cross bracing). - Manufacturer: META CLIP. - Load capacity: 150 kg per shelf with evenly distributed load. - Levels: 5 storage levels. - Surface finish: Sendzimir galvanized. - New stock, available from warehouse. - Made in Germany. - 100% quality at the best price. Pre-assembly of the frames is available upon request for a small additional charge of €2 net per piece. -- AVAILABLE IMMEDIATELY IN MULTIPLE QUANTITIES -- Price: €1,648.00 net plus statutory VAT. You will receive an invoice showing VAT separately. Shipping: Delivery is available upon request through our partner forwarding agent. Delivery costs depend on the postal code. Assembly: Our trained staff is available, if required, to professionally assemble and disassemble your equipment. Our recommendation: Let us know your requirements… We are happy to assist you with your projects, from planning and ordering through to assembly. Do you have questions or are you interested? Contact us simply by message or phone. Our phone number can be found on our company page. ☎️ We are available by phone Monday to Friday, 08:00 - 15:00. Alternatively, you can send us a message with your name and number, and we will get back to you as soon as possible.

Stanje: rabljeno, prevoženi kilometri: 660 km, moč: 55 kW (74,78 KM), prva registracija: 11/2024, skupna masa: 3.500 kg, vrsta goriva: dizel, barva: oranžna, konfiguracija osi: 4x4, največja dovoljena obremenitev: 900 kg, lastna masa: 2.600 kg, velikost pnevmatike: 195/75R16, medosna razdalja: 2.044 mm, voznikova kabina: dnevna kabina, vrsta prenosa: samodejen, emisijski razred: Euro 6, vzmetenje: jeklo, število sedežev: 1, Oprema: dodatne luči, kabina, klimatska naprava, pogon na vsa štiri kolesa, računalnik na krovu, servovolan, Lokacija vozila: prihaja / v tranzitu, 1x zračni sedež, klimatska naprava, avtomatski menjalnik, obloge okvirja, dolgi žarometi, vrtljiva opozorilna luč. Medosna razdalja: 2044 mm Nadgradnja: kompaktni čistilni stroj, pribl. 660 delovnih ur. Emisijski standard EuroMot V, 4-valjni Perkinsov motor, zglobno krmiljenje, hidravlični dvižni sistem za čelno priključne naprave, stalen hidrostatični pogon na vsa kolesa, 40 km/h, pritrdilna plošča za 3 metle, integrirana vzvratna kamera, visokotlačna vodna naprava 160 bar! Prikladen trosilnik soli Stratos 0,6 m³ in Fiedler V snežni plug na voljo za doplačilo 8.900,00 € neto! Vse navedene informacije brez garancije, ker je vozilo v tranzitu! PODATKI O OPREMI BREZ JAMSTVA, spremembe, vmesna prodaja in napake pridržane! Isdpsyyxgvsfx Al Netf

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2026, CONSTMACH čeljustni drobilci so zasnovani za zagotavljanje visoke vzdržljivosti in vrhunske zmogljivosti drobljenja, zaradi česar so idealni stroji za primarno drobljenje v kamnolomih in rudnikih. Zmožni so obdelave širokega spektra materialov – od najmehkejšega apnenca do najtrših vrst granita in bazalta. Njihova robustna konstrukcija, visok navor vztrajnika ter posebna geometrija čeljusti omogočajo učinkovito drobljenje materiala v enakomerne velikosti. Napreden hidravlični mehanizem nastavitve omogoča enostavno prilagajanje želene izhodne frakcije in minimalno potrebo po posredovanju operaterja. CONSTMACH čeljustni drobilci zagotavljajo dolgo življenjsko dobo s kovanim krom-nikljevim ojnim drogom, težko obremenjenimi ležaji in avtomatskim mazalnim sistemom. Varjen okvir ohišja, ki je termično razbremenjen, ohranja maksimalno vzdržljivost tudi pri visokih vibracijah. Uporabniku prijazna zasnova vzdrževanja zagotavlja neprekinjeno in varno delovno okolje med proizvodnjo. Ti drobilci se lahko vgradijo v stacionarne ali mobilne drobilne postroje in tako nudijo visoko prilagodljivost za raznolike projekte. CJC-60 Tehnične specifikacije Dimenzija odprtine: 600 x 380 mm Moč motorja: 30 kW Hitrost gredi: 330 o/min Teža: 6.000 kg Min./Maks. nastavitev: 30 - 100 mm Zmogljivost: 60 - 110 t/h CJC-90 Tehnične specifikacije Dimenzija odprtine: 900 x 650 mm Moč motorja: 75 kW Hitrost gredi: 277 o/min Teža: 11.400 kg Min./Maks. nastavitev: 50 - 150 mm Zmogljivost: 90 - 270 t/h CJC-110 Tehnične specifikacije Dimenzija odprtine: 1.100 x 850 mm Moč motorja: 132 kW Hitrost gredi: 230 o/min Teža: 33.000 kg Min./Maks. nastavitev: 60 - 200 mm Zmogljivost: 150 - 420 t/h CJC-130 Tehnične specifikacije Odprtina čeljusti: 1.300 x 1.000 mm Moč motorja: 160 kW Hitrost gredi: 220 o/min Teža: 42.500 kg Min./Maks. nastavitev: 100 - 280 mm Zmogljivost: 275 - 790 t/h CJC-140 Tehnične specifikacije Dimenzija čeljusti: 1.400 x 1.100 mm Moč motorja: 200 kW Hitrost gredi: 220 o/min Teža: 52.000 kg Min./Maks. nastavitev: 120 - 280 mm Ijdpfx Aloxqgt As Netf Zmogljivost: 420 - 850 t/h Zakaj izbrati CONSTMACH čeljustne drobilce CONSTMACH je sinonim za kakovost in zanesljivost na področju tehnologij drobljenja in presejanja. Vsak model čeljustnega drobilca je izdelan v skladu z mednarodnimi standardi, kar zagotavlja najvišjo zmogljivost, nizke obratovalne stroške in dolgo življenjsko dobo. Po meri prilagodljive rešitve in široka servisna mreža podpirajo neprekinjeno proizvodnjo vašega podjetja. Glede zanesljivosti, inženirske kakovosti ter poprodajne tehnične podpore je CONSTMACH prava izbira za drobilne sisteme. Dejavnost podjetja Constmach Constmach je vodilni proizvajalec strojev, ki industriji gradbeništva in rudarstva ponuja obsežen portfelj izdelkov. Naš asortiment obsega stroje za izdelavo betonskih blokov, stacionarne in mobilne betonske baze, drobilce kamna, postrojenja za drobljenje in presejanje, pralnike peska, stroje za pridobivanje peska, asfaltne baze, transportne trakove, čeljustne drobilce in mobilne drobilne postroje. Zaradi visokih standardov kakovosti, inovativnega pristopa h proizvodnji in osredotočenosti na potrebe kupca je Constmach prepoznaven kot zanesljiva blagovna znamka na domačem in tujem trgu. Naši izdelki so prva izbira strokovnjakov v industriji zaradi vzdržljivosti, učinkovitosti in dolgotrajnega delovanja.

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2026, Stacionarne postrojenja za drobljenje kamena CONSTMACH projektovana su s fokusom na visoku efikasnost i izdržljivost, pružajući dugotrajna industrijska rešenja. Svako postrojenje se posebno konfiguriše u skladu sa tvrdoćom i abrazivnošću materijala koji se drobi, kao i zahtevanoj veličini gotovog proizvoda. Sa kapacitetima proizvodnje od 50 t/h do 1.000 t/h, savršeno se prilagođavaju projektima različitih razmera. Tipovi drobilica koji se koriste u postrojenju biraju se prema karakteristikama materijala, kako bi se postigle maksimalne performanse. Naš projektni tim izrađuje optimizovane 3D planove rasporeda koristeći komponente kao što su dozirni bunker, drobilica, sito, silos, perač i transportna traka. Ovo obezbeđuje visok kapacitet, nisku potrošnju energije i minimalne troškove održavanja tokom celog proizvodnog procesa. Svako postrojenje se prilagođava investicionom budžetu i uslovima rada. Naš inženjerski tim nudi najpovoljnija rešenja i projektne predloge kako bi se sprečili nepotrebni troškovi. Stacionarna postrojenja za drobljenje i separaciju kamena CONSTMACH opremljena su visoko kvalitetnim elektronskim komponentama SIEMENS i SCHNEIDER, a zahvaljujući PLC-u i potpuno automatizovanom sistemu, minimizuju se zahtevi za intervencijama operatera. Ovo omogućava bezbednu, brzu i stabilnu proizvodnju. Tehničke specifikacije stacionarnog postrojenja za drobljenje kamena: Kapacitet proizvodnje: 50 – 1.000 t/h Iodpoxqgwzjfx Al Notf Vrsta materijala za drobljenje: Varira u skladu sa željenom vrstom proizvoda Dimenzije gotovog proizvoda: Podesive po zahtevu Tipovi drobilica: Mogućnosti čeljusne, udarne, konusne ili drobilice sa vertikalnom osovinom Zašto izabrati stacionarno postrojenje za drobljenje kamena od CONSTMACH-a? CONSTMACH pravi razliku svojim inženjerskim pristupom koji nudi rešenja prilagođena svakom kupcu. Naša postrojenja rade besprekorno godinama zahvaljujući visokokvalitetnim komponentama, energetskim efikasnim dizajnima i pouzdanim automatizovanim sistemima. Sa našom postprodajnom podrškom, koja je usmerena ka zadovoljstvu kupaca, uz vas smo u svakoj fazi vaše investicije. CONSTMACH je pravi izbor za stacionarna postrojenja za drobljenje kamena koja nude snažne performanse, niske troškove rada i maksimalnu efikasnost. Šta radimo u kompaniji Constmach? Constmach je vodeći proizvođač mašina, sa širokim asortimanom proizvoda prilagođenih potrebama građevinske i rudarske industrije. Naš proizvodni program obuhvata mašine za izradu betonskih blokova, stacionarne i pokretne betonske baze, drobilice kamena, postrojenja za drobljenje i separaciju, mašine za pranje peska, mašine za izradu peska, asfaltna postrojenja, transportne trake, čeljusne drobilice i mobilna postrojenja za drobljenje. Zahvaljujući visokim standardima kvaliteta, inovativnom pristupu proizvodnji i rešenjima usmerenim ka kupcima, Constmach je pouzdan brend na domaćem i međunarodnom tržištu. Naši proizvodi ostaju prvi izbor profesionalaca u industriji zahvaljujući svojoj izdržljivosti, efikasnosti i dugotrajnom radu.

Stanje: rabljeno, prevoženi kilometri: 59.083 km, moč: 110 kW (149,56 KM), prva registracija: 06/2017, vrsta goriva: dizel, lastna masa: 4.372 kg, največja dovoljena obremenitev: 2.628 kg, skupna masa: 7.000 kg, velikost pnevmatike: 225/75R16, konfiguracija osi: 4x2, barva: bela, voznikova kabina: drugo, vrsta prenosa: mehanski, emisijski razred: Euro 6, vzmetenje: jeklo, število sedežev: 3, velikost sprednje pnevmatike: 225/75R16, velikost zadnje pnevmatike: 225/75R16, Oprema: ABS, drsna vrata, elektronski program stabilnosti (ESP), filter saj, hidravlika, klimatska naprava, nadzor oprijema, računalnik na krovu, spojka prikolice, tempomat, Iveco Daily 70.150 E6 with aerial work platform Klubb - Platform type: Klubb K42 - Hydraulic drive - Maximum working height: 14.8 m - Rotation: 315° - Maximum basket load: 200 kg, 2 persons - Control from the basket or via remote control - ABS - Driver airbag - Central locking with remote control - 6-speed manual transmission - Electric windows and mirrors - Tyres: 225/75R16 One-owner vehicle, in excellent technical and visual condition. All CE certificates, COC documents, and UVV inspections available. Yourtrucks Group The Yourtrucks Group maintains business relationships worldwide. Both purchasing and sales extend beyond national borders, so all our listings reflect the export price, regardless of where the vehicle will be used. Yourtrucks GmbH takes great care in compiling the content of this website and ensures it is updated regularly. This information is non-binding general information and does not replace detailed individual advice when making a purchasing decision. Only the provisions stated in the sales contract are definitive. Subject to change, errors, typographical mistakes, and prior sale. Our general terms and conditions apply exclusively. Languages - We speak English - On parle français - ?? ????? ?? ????? - Mówimy po polsku - Hablamos español Iodpsvih U Aefx Al Netf - Falamos português - Parliamo italiano

Stanje: rabljeno, prevoženi kilometri: 10.500 km, moč: 220 kW (299,12 KM), prva registracija: 07/2018, vrsta goriva: dizel, skupna masa: 26.000 kg, barva: rumena, vrsta prenosa: mehanski, vzmetenje: drugo, število sedežev: 1, obratovalne ure: 10.500 h, Oprema: ABS, kabina, klimatska naprava, pogon na vsa štiri kolesa, spojka prikolice, Air suspension seat, rear-view warning system, one owner, spare wheel, reversing camera, seat heating, radio, diesel, year of manufacture 2018, all-wheel drive, 10,500 operating hours, cabin, trailer hitch, air conditioning, 20 km/h, ABS, front and rear headlights, 1 seat, LockUp/OptiShift, rotating beacon, heated air suspension seat, reverse alarm, reversing camera, radio, diesel particulate filter, bucket with cutting edge, on-board scale, rear counterweight, BSS central lubrication, additional counterweight, spare wheel with rim, tires 26.5 R25 Michelin 80%, service history at Volvo (Bischoff), permissible total weight 26,000 kg, one owner. FOR US, CONDITION AND PEACE OF MIND ARE DECISIVE, PRICE IS SECONDARY. For further questions, please contact Mr. Faller at the following number. TRADE-IN, PART-EXCHANGE, OR FINANCING OF YOUR VEHICLE IS AVAILABLE! All information provided without obligation. More offers can be found on our homepage. The description and specified data do not represent a binding guarantee and are not legally binding. The binding agreement is the purchase contract concluded at the dealership upon purchase. Subject to errors and prior sale! Itedpfx Alovithhs Njf

Stanje: dober (rabljeno), Vakuumska črpalka, rotacijska lopatična črpalka, rotacijska lopatična vakuumska črpalka, tlačno/vakuumska črpalka, rotacijska lopatična tlačno/vakuumska črpalka -Proizvajalec: Gardner Denver, rotacijska lopatična vakuumska črpalka tip VC 150 (20) -Prostorninski pretok: 150 m³/h -Pogon: 3 kW -Skupne dimenzije: 710/400/V290 mm -Teža: 92 kg Isdpfxol U E Twe Al Njtf

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2026, KONSTMACH mobilne pralno-sejalne naprave za pesek serije SW zagotavljajo maksimalno zmogljivost na terenu z visoko učinkovitostjo in fleksibilnostjo uporabe. Namenjene so pranju, sejanju in klasiranju naravnega peska in gramoza, pri čemer jih je zaradi kompaktne zasnove mogoče enostavno namestiti tudi na ozka območja. Vsa oprema je nameščena na enem mobilnem podvozju, kar močno skrajša čas postavitve in omogoča izjemno praktičen transport. Te naprave je mogoče hitro premikati med posameznimi gradbišči, zaradi česar podjetja bistveno prihranijo čas in denar. SW-1240 Proizvodna zmogljivost: 60 t/h Dimenzije sita: 1.200 x 4.000 mm Dimenzije spiralnega pralnika: 400 x 4.000 mm Višina dovoda: 4.600 mm Skupna moč motorjev: 37 kW Potreba po generatorju: 75 kVA Teža: 20.000 kg Transportne dimenzije: 15(D) x 2,8(Š) x 4,2(V) m SW-1640 Proizvodna zmogljivost: 80 t/h Dimenzije sita: 1.600 x 4.000 mm Dimenzije spiralnega pralnika: 500 x 5.000 mm Višina dovoda: 4.650 mm Skupna moč motorjev: 41 kW Potreba po generatorju: 85 kVA Teža: 24.000 kg Transportne dimenzije: 15,5(D) x 3,25(Š) x 4,3(V) m SW-1850 Proizvodna zmogljivost: 150 t/h Dimenzije sita: 1.800 x 5.000 mm Dimenzije spiralnega pralnika: 600 x 6.000 mm Višina dovoda: 4.700 mm Skupna moč motorjev: 50 kW Potreba po generatorju: 100 kVA Teža: 32.000 kg Transportne dimenzije: 16(D) x 3,65(Š) x 4,4(V) m SW-2060 Proizvodna zmogljivost: 200 t/h Dimenzije sita: 2.000 x 6.000 mm Dimenzije spiralnega pralnika: 700 x 7.000 mm Višina dovoda: 4.750 mm Skupna moč motorjev: 55 kW Potreba po generatorju: 120 kVA Teža: 37.000 kg Transportne dimenzije: 17(D) x 3,85(Š) x 4,5(V) m Zakaj izbrati mobilne pralno-sejalne naprave za pesek CONSTMACH? CONSTMACH združuje kakovost, vzdržljivost in uporabniku prijazno zasnovo v svojih mobilnih pralno-sejalnih napravah za pesek. Naše stroje, izdelane po evropskih standardih, odlikujejo visoka pralna zmogljivost in nizki stroški vzdrževanja. Vsaka naprava je rezultat dolgoletnih inženirskih izkušenj in zasnovana za nemoteno učinkovitost v proizvodnih procesih naših strank. Zaradi mobilnosti, hitre montaže in vrhunske zmogljivosti so te naprave izjemno fleksibilne v vseh fazah projekta. Izberite znamko CONSTMACH za kakovostno proizvodnjo, tehnično podporo in zanesljivo servisno storitev. Kaj počnemo pri Constmach? Itjdoxp Scgepfx Al Nsf Constmach je vodilni proizvajalec strojev za gradbeništvo in rudarstvo, ki ponuja široko paleto izdelkov. Naš portfelj vključuje stroje za izdelavo betonskih blokov, stacionarne in mobilne betonske centrale, drobilce za kamen, postaje za drobljenje in sejanje, pralnike in izdelovalce peska, asfaltne baze, transportne trakove, čeljustne drobilce ter mobilne postaje za drobljenje. Constmach s svojimi visokimi standardi kakovosti, inovativno proizvodnjo in rešitvami, prilagojenimi strankam, izstopa kot zaupanja vredna blagovna znamka tako v domačem kot v mednarodnem okolju. Naši izdelki so zaradi svoje vzdržljivosti, učinkovitosti in dolgotrajne zmogljivosti stalna izbira profesionalcev v industriji.

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, CONSTMACH čeljustni drobilci so zasnovani za zagotavljanje visoke vzdržljivosti in vrhunske zmogljivosti drobljenja, zaradi česar so idealni stroji za primarno drobljenje v kamnolomih in rudnikih. Zmožni so obdelave širokega spektra materialov – od najmehkejšega apnenca do najtrših vrst granita in bazalta. Njihova robustna konstrukcija, visok navor vztrajnika ter posebna geometrija čeljusti omogočajo učinkovito drobljenje materiala v enakomerne velikosti. Napreden hidravlični mehanizem nastavitve omogoča enostavno prilagajanje želene izhodne frakcije in minimalno potrebo po posredovanju operaterja. CONSTMACH čeljustni drobilci zagotavljajo dolgo življenjsko dobo s kovanim krom-nikljevim ojnim drogom, težko obremenjenimi ležaji in avtomatskim mazalnim sistemom. Varjen okvir ohišja, ki je termično razbremenjen, ohranja maksimalno vzdržljivost tudi pri visokih vibracijah. Uporabniku prijazna zasnova vzdrževanja zagotavlja neprekinjeno in varno delovno okolje med proizvodnjo. Ti drobilci se lahko vgradijo v stacionarne ali mobilne drobilne postroje in tako nudijo visoko prilagodljivost za raznolike projekte. CJC-60 Tehnične specifikacije Dimenzija odprtine: 600 x 380 mm Moč motorja: 30 kW Hitrost gredi: 330 o/min Teža: 6.000 kg Min./Maks. nastavitev: 30 - 100 mm Zmogljivost: 60 - 110 t/h CJC-90 Tehnične specifikacije Dimenzija odprtine: 900 x 650 mm Moč motorja: 75 kW Hitrost gredi: 277 o/min Teža: 11.400 kg Min./Maks. nastavitev: 50 - 150 mm Zmogljivost: 90 - 270 t/h CJC-110 Tehnične specifikacije Dimenzija odprtine: 1.100 x 850 mm Moč motorja: 132 kW Hitrost gredi: 230 o/min Teža: 33.000 kg Min./Maks. nastavitev: 60 - 200 mm Zmogljivost: 150 - 420 t/h CJC-130 Tehnične specifikacije Odprtina čeljusti: 1.300 x 1.000 mm Moč motorja: 160 kW Hitrost gredi: 220 o/min Teža: 42.500 kg Min./Maks. nastavitev: 100 - 280 mm Zmogljivost: 275 - 790 t/h CJC-140 Tehnične specifikacije Dimenzija čeljusti: 1.400 x 1.100 mm Moč motorja: 200 kW Hitrost gredi: 220 o/min Itsdpfsxpkgdox Al Nef Teža: 52.000 kg Min./Maks. nastavitev: 120 - 280 mm Zmogljivost: 420 - 850 t/h Zakaj izbrati CONSTMACH čeljustne drobilce CONSTMACH je sinonim za kakovost in zanesljivost na področju tehnologij drobljenja in presejanja. Vsak model čeljustnega drobilca je izdelan v skladu z mednarodnimi standardi, kar zagotavlja najvišjo zmogljivost, nizke obratovalne stroške in dolgo življenjsko dobo. Po meri prilagodljive rešitve in široka servisna mreža podpirajo neprekinjeno proizvodnjo vašega podjetja. Glede zanesljivosti, inženirske kakovosti ter poprodajne tehnične podpore je CONSTMACH prava izbira za drobilne sisteme. Dejavnost podjetja Constmach Constmach je vodilni proizvajalec strojev, ki industriji gradbeništva in rudarstva ponuja obsežen portfelj izdelkov. Naš asortiment obsega stroje za izdelavo betonskih blokov, stacionarne in mobilne betonske baze, drobilce kamna, postrojenja za drobljenje in presejanje, pralnike peska, stroje za pridobivanje peska, asfaltne baze, transportne trakove, čeljustne drobilce in mobilne drobilne postroje. Zaradi visokih standardov kakovosti, inovativnega pristopa h proizvodnji in osredotočenosti na potrebe kupca je Constmach prepoznaven kot zanesljiva blagovna znamka na domačem in tujem trgu. Naši izdelki so prva izbira strokovnjakov v industriji zaradi vzdržljivosti, učinkovitosti in dolgotrajnega delovanja.

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, vrsta goriva: dizel, prostornina žlice: 5 m³, Leto izdelave: 2016, obratovalne ure: 9.118 h, številka stroja/vozila: VCEL150HH00005075, Oprema: AdBlue, klimatska naprava, Pnevmatike nakladalnika so bile zamenjane! Isdpfox Tqm Iox Al Netf TEHNIČNE PODROBNOSTI Prostornina nakladalne žlice: 5 m3 PODATKI O STROJU Dimenzije in teža Transportne dimenzije (D x Š x V): 9,1 m x 3,2 m x 3,9 m Lastna teža: 26.100 kg Vrsta goriva: Diesel Blagovna znamka motorja: D13J Emisijski standard: Stage IV / Tier IV final Tip podvozja: zgloben Delovne ure: 9.118 h OPREMA Klimatska naprava AdBlue sistem CE-certifikat

Stanje: dober (rabljeno), Hydraulic cylinder, support cylinder, hydraulic ram, pressure ram -Manufacturer: Hydraulik Griessen, double-acting hydraulic cylinder, stroke: 150 mm -Type: HN3-GHI 80/55-150 D H -Piston rod: Ø 55 mm / M34 -Mount: Ø 40 mm -Dimensions: Ø 128 x 545 mm Itodpfx Ajv N E Igsl Njf -Weight: 24.4 kg