Reishauer Stroj Za Honiranje Zobnikov nakup rabljenega (93.647)

Stanje: rabljeno, Leto izdelave: 2005, Technical Details: Workpiece diameter: 63.5 mm Centre distance: 350 mm Max. honing length: mm Total power requirement: kW Machine weight approx.: 6 t Approx. space required: 2.70 x 2.30 x 2.60 m Technical Data G0504 Working Area Clamping surface length mm: 1550 Number of T-slots mm: 2 Width of T-slots mm: 18 Distance between T-slots mm: 180 Centre height (tailstocks) mm: 350 Swivel range of fine pitch head (U-axis) degrees: +30/-30 Axis distance - tailstock/fine pitch min./max. mm: 120/225 Input increment (all NC axes) mm/degree: 0.001 Slide Travel range (Z-axis stroke) mm: 105 Input increment mm: Tool Outside diameter min./max. mm: 225/275 Bore diameter mm: 160 Width mm: 60 Workpiece Outside diameter min./max. mm: 40-150 Module min./max. mm: 1.25-4.0 Tooth width max. mm: 45 Gbodpfowrh H Njx Adkor Weight Machine weight approx. kg: 5500 Operating Materials Requirements For coolant/lubricant recommendations, see section 8 Hydraulic fluid HLP D 46 approx. litres: 100 Speeds and Feeds Tool spindle speed (infinitely variable) max. rpm: 2000 Feed rates Rapid traverse/feed Z-axis up to m/min: 2 X-axis up to m/min: 2 U-axis up to m/min: 2 V-axis up to m/min: 2 C3-axis max. deg/s: 12 Electrical Equipment Operating voltage V: 400 Control voltage/lighting voltage V DC/AC: 24/230 Frequency Hz: 50 Power requirement approx. kVA: 27 If the electrical installation is to be carried out according to customer specifications, only the data in the electrical documentation apply. Motor Data Servo drives: Nm / rpm Tool drive C1: 27.0 / 3000 Workpiece drive C2: 27.0 / 3000 X-axis: 20.0 / 3000 Z-axis: 20.0 / 3000 U-axis: 6.0 / 3000 Portal vertical (V1-axis): 6.0 / 3000 Portal horizontal (U1-axis): Gripper rotary axis C3: 5.0 / 3000 Loader slide (X1-axis): 5.0 / 3000 Three-phase motors: kW / rpm Hydraulic motor: 1.5 / 1410 Central lubrication: 0.07 / 2700 Coolant pump: 4 / 2840 Hydraulic Equipment Flow rate l/min: 21 System pressure bar: 50 Clamping pressure for: - Headstock max. bar: 35 - Clamping tailstock min./max. bar: 20 Only available as required. Not all limit values can necessarily be achieved simultaneously. If several maximum values coincide during a machining operation, performance restrictions must be expected! The right to make changes to the specified designs, dimensions and weights is reserved.

Stanje: rabljeno, Leto izdelave: 1996, Workpiece diameter: 240 mm Distance between centers: 0 mm Max. honing length: 500 mm Max. module: 5 Total power requirement: 12 kW Machine weight approx.: 5000 kg Space requirement: approx. [field missing] REISHAUER (Switzerland) CNC-controlled Gear Honing Machine Model: RZR, Year: 1996, #74 105 Min./max. gear diameter: 10 - 240 mm Module: 0.5 - 5 Helix angle: +/- 30° Workpiece slide travel (Z-axis): 275 mm Honing tool traverse (X-axis): 128 mm X-axis infeed per stroke: 0.001 mm Crowning (approx.): 0.5° Workpiece clamping length (approx.): 500 mm Max. workpiece oscillation (approx.): 3,000 mm Honing tool Ø outer/inner x width: 325/308 x 45 mm Honing tool speed: 100 - 1,200 rpm Honing tool dressing speed: 30 - 1,000 rpm Spindle drive: 4 kW Total drive: approx. 12 kW - 400 V - 50 Hz Total weight: approx. 5,000 kg Accessories / Special equipment: - SIEMENS CNC path control Type 810 G enables input of all relevant gear data and easy workpiece setup via dialog with the control system. - With DNC interface RS 232 for data import/export. - A-axis = helix angle/Z-axis = table movement/X-axis = honing tool infeed, S-axis = honing wheel speed, U-axis = crowning system - With built-in device for automatic threading of the honing wheel into the tooth gap Gsdpfxot Hwvmo Adksbr - The tool swivel angle (A-axis) is also moved electronically, quickly and precisely, and hydraulically clamped—this also means faster setup times. - Hydraulic workpiece clamping via foot switch between workpiece headstock and tailstock, both units are adjustable on the workpiece table depending on the part - Complete machining area enclosure with sliding doors and safety interlock - Sophisticated original REISHAUER honing oil conditioning unit Type RTO 40.10, with centrifuge and cooling unit for stable oil temperature, oil mist filter, etc. - Various diamond dressing tools mounted on mandrels - Separate ventilated and cooled electrical and control cabinet, separate hydraulic unit

Stanje: rabljeno, Leto izdelave: 1983, Workpiece diameter: 250 mm Center distance: 0 mm Max. honing length: --- mm Max. module: 5 FÄSSLER (Switzerland) Conventional gear honing machine Type D - 250, Year of manufacture: 1983, Serial No. 31 205.049.22 _____ Wheel diameter: 10 - 250 mm Module: 1 - 5 Gear length/Table stroke max.: 500 mm Center height of tailstocks: 220 mm Max. workpiece weight: 50/100 kg Swivel range of honing head: +/- 35° Honing tool speeds: 20 - 500 rpm Honing tool size / width: 300 / 40 mm Workpiece speeds: 500 - 3,000 rpm Total cross-slide travel: 270 mm Rapid traverse cross-slide travel: 50 mm Gsdpfx Adet Hwzpeksbr Cross-slide feed, mechanical: 1 - 8 mm/Ø Roughing/finishing feed rates: 1-29 / 0.2-2.8 μ/sec Table speed, hydraulic: 0 - 6 m/min Total power: 5.5 kW - 380 V - 50 Hz Weight: 3,200 kg Accessories / Special equipment: - Pre-selectable machining parameters via counters and switching units for automatic operation, with workpiece counter. - All roughing and finishing feeds via decade switches, as well as potentiometer-adjustable table reverse times and rapid feeds adjustable by time (1 s = 0.04 mm), ampere display, etc. - Capability for barrel and taper honing using templates (also off-center, requires pre-machined workpiece). - Separate honing oil system with magnetic separator and fine filter. - Mechanical tailstocks for manual loading, oil mist separator, sliding doors with foot switch, separately housed hydraulic unit.

Leto izdelave: 1981, stanje: dober (rabljeno), Manufacturer: National Broach Godpfxehad Ave Adksbr Model: GHC 12" Year of manufacture: 1981 Max. workpiece diameter: 355 mm Min./max. pitch circle diameter: 100–152 mm Max. face width: 63.5 mm Min./max. module: 1.25–6.35 mm Weight: 3.4 t Operation: Internal gear honing

Stanje: zelo dobro (rabljeno), Premer kolesa – maks. 40 mm Širina kolesa 0 – 50 mm Modul – maks. 1 Modul – min. 0,05 Število vrtljajev 660 – 5300 vrt/min Število zob – min. 6 – 200 Godjztf A Iopfx Adksbr Dolžina vpenjanja maks. 80 mm Pomik pri rezanju 10 mm Skupna poraba moči 1,2 kW Masa stroja pribl. 0,5 t Potreben prostor pribl. 0,8 x 0,8 x 1,4 m Najvišja natančnost pri izdelavi zobnikov, zlasti v urarski industriji, pri izdelavi aparatur in v strojni opremi. z nosilcem W 35

Stanje: rabljeno, Leto izdelave: 1985, številka stroja/vozila: 0440298, Premer kolesa: 500 Minimalni premer kolesa: 50 Maksimalni zunanji premer obdelanega kolesa z notranjim zobljenjem: 800 Maksimalna razdalja osi kladiva do osi mize: 355 Minimalna razdalja osi kladiva do osi mize: 0 Največje število zob obdelanega kolesa: 300 Najmanjše število zob obdelanega kolesa: 12 Najmanjši modul: 1,5 Največji modul: 8 Godpfsywh N Iox Adksbr Premer mize: 500 Luknja v mizi: 120 Globina luknje: 650 Leto izdelave: 1985 Teža: 5.200 kg

Stanje: rabljeno, Leto izdelave: 2008, Zunanji premer obdelovanca maks. 3420 mm Notranji premer obdelovanca min. 630 mm Modul – maks. 30 mm Nadzorni sistem Siemens Sinumerik 840 D Širina zob obdelovanca – maks. 600 mm Premer kroga glave 440 mm Premer rezkalnega vretena 80 mm Hod po osi X 1110 mm Hod po osi Y 1300 mm Število vrtljajev vretena – brezstopenjsko 18 – 180 vrt/min Število vrtljajev mize – brezstopenjsko 0 – 6 vrt/min Debelina obroča 500 mm Skupna priključna moč 100 kVA Masa stroja pribl. 38 t Potreben prostor pribl. 8,41 x 9,05 x 5,19 m Hitrost podajanja: - Os X 1 do 3000 mm/min - Os Z 1 do 4000 mm/min Število vrtljajev vretena v vrt/min - Orodje 18 do 180 - Miza za obdelovanec 0 do 6 Oprema/dodatna oprema: - Notranja rezkalna glava IFK2 - Rezkalno vreteno z distančnimi podložkami - Odstranjevalec sekancev Gedpfxoztz Ruo Adkobr - Sesalni sistem za oljno meglico - Omogočeno samo suho obdelovanje - Tehnična dokumentacija

Stanje: rabljeno, Leto izdelave: 2007, Nominalni premer obdelovanca: 2400 mm Premer obdelovanca: do 2800 mm Modul: do 30 mm Krmilni sistem: Siemens Sinumerik 840 D Gbsdpfsw Rf S Sox Adkor Premer delilnega diska: 2200 mm Premer mize: 2500 mm Premer/globina luknje v mizi: 800/875 mm Maksimalna nosilnost mize: 40000 kg Hitrost vrtenja mize: 4,5 min-1 Maksimalna dolžina vpenjanja: 375 mm Maksimalni premer vpenjanja: 350 mm Premer rezalnika: do 2800 mm Stožec vretena rezalnika: HSK-B160 Območje nagiba rezalne glave: +30/-45° Razdalja med rezalnikom in obdelovancem: 615/1600 mm Masa stroja: približno 57 t Pogon po osi: - Hitrosti podajanja in hitrega premika: - aksialno 4000 mm/min - radialno 3000 mm/min - tangencialno 3000 mm/min Oprema/dodatna oprema: - Notranja rezalna glava IFK2 - Rezalno vreteno s distančnimi diski - Odstranjevalec sekancev - Sistem za odsesavanje oljne meglice - Omogočeno mokro in suho obdelovanje - Tehnična dokumentacija

Stanje: zelo dobro (rabljeno), Wheel diameter – max. 300 / 400 mm Wheel width 76 mm Module – max. 6 Module – min. 0.5 Control system BWO CNC 921 Stroke slide displacement 94 mm/stroke Stroke 82 mm Strokes per minute 75 – 1000 spm Number of teeth 5 – 200 Gjdpfx Adszq Hmcekebr Cutter arbor mount SK 45 Table diameter 400 mm Total power requirement 50 kW Machine weight approx. 7.5 t Space required approx. 5.0 x 3.8 x 3.4 m Machine in very good condition!

Stanje: zelo dobro (rabljeno), Leto izdelave: 2008, Siemens Sinumerik 840 D, 5-osno krmiljenje. Gjdsza Egbspfx Adkobr Največji premer kolesa: 2000 mm Širina kolesa: 700 mm Teža stroja: 35.000 kg Prostorske zahteve: pribl. 6,9 x 8,4 x 3,7 m

Stanje: rabljeno, TEHNIČNI PODATKI - Največji premer obdelovanca: 80 [mm] - Z-premik: 220 [mm] - Največji modul: 2,5 - Največja hitrost vretena nosilca obdelovanca: 3000 [obr/min] Gbedsyuzgaspfx Adker - Največje dimenzije valjčne rezkarice (premer × dolžina): 118 × 120 [mm] - Hitrost vretena rezkarja: 200–5000 [obr/min] - Premik za preklop: 140 [mm] - Kotni premiki rezkalne glave: -45/+115 [stopinj] - Potrebna površina: 2700/2180 [mm] - Višina stroja: 2310 [mm] - Teža stroja: 4800 [kg] DODATNA OPREMA - Krmilje: Siemens 840D PowerLine - Nakladalni manipulator

Stanje: rabljeno, TEHNIČNI PODATKI - Maks. premer obdelovanca: 80 [mm] Gedpoyuzggsfx Adkobr - Z-pomik: 220 [mm] - Maks. modul: 2,5 - Maks. hitrost vretena nosilca obdelovanca: 3000 [vrt/min] - Maks. dimenzije valjčne rezkalke (premer × dolžina): 118 × 120 [mm] - Hitrost vretena rezkalke: 200-5000 [vrt/min] - Preklopni hod: 140 [mm] - Kotni pomiki rezkalne glave: -45/+115 [stopinj] - Potreben prostor: 2700/2180 [mm] - Višina stroja: 2310 [mm] - Teža stroja: 4800 [kg] DODATNA OPREMA - Krmiljenje: Siemens 840D PowerLine - Nakladalni manipulator

Stanje: rabljeno, Leto izdelave: 2006, Premer obdelovanca: 5 - 1.000 mm Modulni razpon: 0,2 - 25 Kot nagiba: < 90° Krmiljenje: Wenzel GearTec Premer čeljustne plošče: 750 mm X-os: 1.200 mm Y-os: 550 mm Z-os: 1.000 mm Skupna priključna moč: 6,5 kW Teža stroja cca: 11 t Potrebni prostor cca: 3,30 x 3,15 x 2,70 m Upravlja naslednje programe: BMain, FPDFPPostAction, GrafTool, TAlign, TAnalyse, TApplication, TCali, TCut_INPUT, TCut_MEAS_EVAL, TGear_INPUT, TGear_MEAS_EVAL, THob_INPUT, THob_MEAS_EVAL, TMesblatt, TPlot, TRoot_INPUT, TShaft_INPUT, TShaft_MEAS_EVAL, Gsdpfx Aozkvvyedkebr TStat, TStylus, WMI, wingeco.

Stanje: zelo dobro (rabljeno), Premer kolesa – maks. 175 mm Širina kolesa 350 mm Gjdpfoznnitsx Adkjbr Modul – maks. 3 Modul – min. 0,5 Masa stroja pribl. 0,9 t Potreben prostor pribl. 1,2 x 0,8 x 1,4 m

Stanje: zelo dobro (rabljeno), Leto izdelave: 1978, Stroj za obdelavo zobnikov WMW MODUL ZFWZ 2000/3 Največji premer z oporo: 1450 mm Največji premer brez opore: 2100 mm Godpfjzt Iu Tsx Adkebr Največji modul: 30

Stanje: Okvarjen nosilec rezervnih delov (rabljen), Funkcionalnost: nefunkcionalno, premer obdelovanca (maks.): 400 mm, Po navedbah električarja je treba glavni motor naviti na novo. Ogljikove ščetke je treba zamenjati, prav tako pa še 2 tuljave v omarici stikal. Gbsdpjzp R Tkjfx Adksr Do izpada motorja je stroj deloval brezhibno.

Stanje: zelo dobro (rabljeno), Leto izdelave: 1983, Premer mize: 1000 mm Največji možni premer obdelovanca: 1250 mm Modul: 12 Največji hod: 200 mm Gjdpfx Ajzqkizjdksbr VSE LEŽAJE SMO ZAMENJALI Z NOVO

Stanje: rabljeno, Leto izdelave: 1991, Funkcionalnost: popolnoma funkcionalen, skupna dolžina: 4.920 mm, skupna višina: 2.500 mm, skupna širina: 2.855 mm, premer obdelovanca (maks.): 200 mm, Naprodaj je strojno orodje Mikron A35, CNC-obdelovalni stroj za zobnike, v dobrem stanju in pripravljen za uporabo. Stroj se odlikuje z visoko natančnostjo, zanesljivostjo in produktivnostjo, zato je idealen za gospodarno proizvodnjo zobnikov in zobatih prenosov. Tehnični podatki: Proizvajalec: Mikron Model: A35 CNC Način obdelave: CNC-obdelava zobnikov Maks. premer obdelovanca: 200 mm Maks. modul: 3,0 / 4,5 Maks. dolžina obdelovanca: 400 mm Število vrtljajev orodja: do 1.500 vrt/min Tehnični podatki ustrezajo običajnim specifikacijam za stroj Mikron A35 CNC. Stanje: Popolnoma delujoč Redno vzdrževan Gbedpezphw Tofx Adksr Ogled stroja je možen po predhodnem dogovoru in ob vklopljenem napajanju Na voljo takoj ali po dogovoru.

Stanje: rabljeno, Leto izdelave: 1980, Raddurchmesser - max. 2500 mm Radbreite 0 mm Modul - max. 34 Modul - min. 1 Gesamtleistungsbedarf ca. 15 kW Maschinengewicht ca. 15 t Raumbedarf ca. 4,20 x 2,00 x 2,90 m K L I N G E L N B E R G (Deutschland) Universelle Evolventen- und Schraubenmessmaschine Modell PFSU 2500 Baujahr ca. 1980 Serien-Nr. B 2918 _____ min./max. Zahnrad-Ø: 250 - 2.500 mm Modulbereich: 1 - 34 Max. Grundkreisdurchmesser: 2.400 mm Messbare Zahnlänge: 500 mm Hub des Messschlittens, ca.: 600 mm Schrägungswinkel: 0 - 45° Werkstücklänge zwischen Spitzen min./max.: 430 - 2.500 mm Werkstück-Ø in Gegenhalter: 1.340 mm Werkstücktisch-Ø: 690 mm Diagrammvergrößerung: 50/100/200/500/1000/2000 : 1 Max. zulässiges Testgewicht des Zahnrads, ca.: 10.000 kg Gedpfot Hw Aaex Adkobr Gesamtanschlussleistung, ca.: 15 kW - 380 V - 50 Hz Maschinengewicht, ca.: 15.000 kg Geeignet für die Messung von Zahnprofil und Zahnflankenverlauf an hochbelastbaren Gerad- und Schrägverzahnungen. Zubehör / Sonderausstattung: * Digitale Einstellung des Grundkreises und digitale Winkelverstellung ohne Grundkreisscheiben. * Längenverstellbare Halterung für Teilungsprüfgerät, jedoch ohne Prüfeinheit. * Schwere Werkstücke können auf der Maschine geprüft werden. Motorisch angetriebene Aufspannung, Ausrichtung und Prüfprozess per Tastendruck. * Gegenhalter nach hinten schwenkbar zum Beladen von Großzahnrädern und Kettenrädern, diverse weitere Zubehörteile. Zustand: Diese Messmaschine muss überholt und mit einer neuen CNC-Steuerung nachgerüstet werden. Die Grundmaschine ist jedoch in einem ordentlichen Zustand, daher lohnt sich eine Überholung. Eine Funktionsprüfung unter Strom ist nicht möglich. Teile des Bedienfelds sind nicht vorhanden.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2007, Wheel diameter - max. 400 mm Machine weight approx. 4 t O F F E R We can offer you the following, subject to prior sale and error, without obligation, from stock: KLINGELNBERG Single- & Double-Flank Gear Rolling Tester with Structure-Borne Noise Testing Model R 30 Year of manufacture 2007 _____ Workpiece - Outside diameter min. / max. 36 /300 mm Center distance workpiece – master gear 135 - 290 mm Max. spindle speed 3,000 rpm Max. drive torque up to 2196 rpm 20 Nm Max. drive torque 2196 – 3,000 rpm 14.7 Nm Spindle drive 4.62 kW Total drive power approx. 10 kW - 400 V - 50 Hz Weight approx. 4,000 kg Accessories / Special Equipment • The machine is a universal gear roll testing machine designed for the following test procedures: o Single-flank roll testing o Double-flank roll testing o Structure-borne noise testing in single & double flank contact o Helix testing in double flank contact • WINDOWS PC control for measurement data acquisition and analysis, with NoisyS32 test software • SIEMENS operator panel for machine control and test cycle evaluation • Complete enclosure with electrically monitored sliding doors • Attached control cabinet, various accessories, operating manuals • Currently, the “license dongle” for activating the measurement software is unfortunately missing. We hope to still obtain this from the seller. Gbodpfx Ajxvdryodkjr Condition: Very good! Barely used! Coming soon: Click here for a video of the machine: Delivery: ex stock, immediately available, FCA Metzingen Payment: strictly net - upon receipt of invoice Always a large selection of gear cutting machines in stock – please inquire for your requirements!

Stanje: rabljeno, Leto izdelave: 1985, Wheel diameter - max. 80 mm Wheel width 150 mm Module - max. 2.5 Module - min. Total power requirement 10 kW Machine weight approx. 2400 kg Fully automatic gear hobbing machines for worm gearing Type A 33 / 1 Year of manufacture 1985 Serial No. 14.06/14.07/14.15 TECHNICAL DATA: max. wheel (without loading magazine) approx. 80 mm max. wheel (with loading magazine) approx. 50 mm Module max. 2 / 2.5 Axial hobbing length approx. 150 mm max. workpiece installation length approx. 200 mm Hob carriage swiveling up to 90 degrees Cutter diameter 24 - 50/63 mm Hob carriage radial travel max. 0-14/18 mm Cutter shift max. 25 mm Cutter speeds 212 - 2,000 rpm Axial feed range, stepless 0.05 - 4.0 mm/rev Radial, stepless 0.2 - 200 mm/min Hob spindle drive 3 kW Total drive approx. 10 kW - 50 Hz - 380 Volt Weight approx. 2,400 kg Accessories / Special features: Fully automatic operation sequence and minimal secondary times through freely programmable SIEMENS program control S 5 for all machining steps such as rapid traverse, feed, cutter on/off, for the loading device, tailstock, possible shifting, etc., with piece counter, program numbering, and with 30-step numerical error display. Godpjt Hw D Rofx Adkebr Pneumatic workpiece loading and unloading device parallel to the workpiece axis for shaft-shaped workpieces approx. 140 mm long x 8 mm Ø, with pneumatic double gripper for loading and unloading the workpieces; raw parts are placed outside in exchange cassettes and inserted into the loading device. The double gripper brings the parts between workpiece spindle and tailstock, the tailstock quill pushes the parts into the main spindle collet and clamps them simultaneously. Finished parts are ejected from the main spindle and returned by the gripper to the (finished parts) cassette. The entire process is electrically monitored and controlled. The complete loading device is enclosed with Plexiglas. Hydraulic workpiece clamping device with collets and hydraulic ejector Separate coolant system with magnetic separator * separate hydraulic unit * various change gears Condition: Good - 3 machines available, currently 1 machine ready for demonstration under power, The machine is set up for gearing of worm shafts/armature shafts used in adjustable gear units for car seats, window regulators, etc.

Stanje: rabljeno, Leto izdelave: 1977, Maximum wheel diameter: 400 mm Wheel width: 280 mm Module - min.: 1 Module - max.: 4 Total power requirement: 15 kW Machine weight: approx. 6,000 kg Space required: approx. ___ m L O R E N Z Universal Gear Hobbing Machine Model: F 400 Year: 1977 Serial No.: 8687 Wheel diameter min./max.: 400 mm Module range: 1 - 4 Number of teeth approx.: 8 – 210 Hobbing width approx.: 280 mm Maximum workpiece installation length approx.: 450 mm Swivel range of hobbing slide: up to 60° Cutter size (diam. x length): 160 x 220 mm Maximum cutter shift: 180 mm Cutter speeds: 125–500 rpm Table diameter x bore: 375 x 80 mm Feed ranges: axial 0.31 – 4.00 mm/rev radial 0.12 – 1.60 mm/rev tangential 0.035 – 4.5 mm/min Hob spindle drive approx.: 8 kW Total drive approx. max.: 15 kW – 380 V – 50 Hz Weight approx.: 6,000 kg Accessories / Special Equipment: • Various selectable hobbing programs for climb and conventional cutting, and for radial/axial processes, possibly for worm hobbing Gedpfxjt Hw Hxe Adkjbr • Universal hobbing head with cutter shift • Hydraulic workpiece clamping in table and hydraulic tailstock • Hydraulically swiveling counter-holder connection for easier loading • Differential for helical gearing • Stepless speed adjustment, speed and ampere display • Change gears, various accessories, coolant system • Very robust construction Condition: good – to be demonstrated shortly Delivery: ex-stock – as inspected Payment: upon receipt of invoice, strictly net

Stanje: rabljeno, Leto izdelave: 1995, Wheel diameter – max. 80 mm Wheel width 120 mm Module – max. 3 Module – min. 1 Control unit SIEMENS 840 C Total power requirement 30 kW Machine weight approx. 7,500 kg Space requirement approx. ___ m LIEBHERR CNC-controlled gear hobbing machine Model LC 82 Year of manufacture 1995 # 0836 _____ Max. wheel diameter: 80 mm Module: 1 – 3 Helix angle: +/- 45° Distance from table center to tool center: 15 – 160 mm Vertical travel of milling slide: 250 mm Shifting/Tool traverse path: 180 mm Min. number of teeth: 3! Cutter diameter x length approx.: 90 x 200 mm Cutter speeds up to max.: 800 rpm Feed rates (axial/radial/tangential): 20/4/5 mm/rev Maximum workpiece clamping length: 250 mm Spindle drive approx.: 8 kW Total drive approx.: 30 kW – 400 V – 50 Hz Total weight approx.: 7,500 kg Accessories / Special features Gbsdpfot Hw R Dsx Adkjr • SIEMENS CNC control system Type 840 C for 6 axes (i.e., cutter drive / table drive / swiveling angle of milling head / axial feed / radial feed / tangential feed), with gear-cutting-specific operator interface and diagnostic functions for fast troubleshooting. • Equipped for automatic threading of the hobbing cutter into the tooth gap • Automatic shifting of the cutter axis • Automatic workpiece loading system SSL = rapid-swing loader with mechanical step gearing and cam disk for fast loading cycles. Features triple rotary gripper for blank picking / machining position / unloading. Current workpiece size Ø 30 x 120 mm, helical gearing (pinion) • Workpiece feed is via a plate-chain conveyor (PKB) for transporting workpieces with frictional engagement using workpiece carriers. Additional conveyor belt for blanks and finished parts • Chip conveyor, complete working area enclosure, intermediate coolant tank with pump Complete enclosure of the working area with sliding door and oil mist extraction, etc. Machine can also be used for dry gear cutting. Condition: satisfactory to good – under power and ready for demonstration, compact construction! Delivery: ex stock – as inspected Payment: net – upon receipt of invoice

Stanje: rabljeno, Leto izdelave: 1980, Wheel diameter – max. 1010 mm Wheel width: 0 mm Module – max.: Module – min.: Total power requirement: 15 kW Machine weight approx. 9.5 t Space requirement approx.: G L E A S O N (USA) "CURVIC-Coupling" Grinding Machine Model 120 (888), Year of manufacture 1980, Serial No. 763402 Max. tooth height: 10 mm Max. workpiece swing diameter: 1,010 mm Max. external diameter of CURVIC gearing: 610 mm Retraction of workpiece slide plate: 216 mm Max. distance grinding wheel to workpiece nose: 90–430 mm Max. workpiece weight incl. clamping device: approx. 500 kg Number of teeth: 32–150 Grinding wheel diameter: approx. 152–320 mm Grinding wheel speeds, infinitely variable: 0–3,600 rpm Workpiece spindle bore: 60 mm Godpfst Hwniox Adksbr Total drive approx. 15 kW – 380 V – 50 Hz Weight approx. 9,500 kg Accessories / Special equipment: Automatic rough grinding and finish grinding with presettable counters and built-in feed curves Counter for number of teeth Counter for number of dressing cycles 2 mounted dressers with 3 dressing diamonds for external dressing, internal dressing, and tip dressing of the grinding wheel Mounted index plate for 48 teeth Stand-alone coolant unit with belt filter, separate hydraulic unit Stand-alone oil mist extraction unit make TRION, various small parts

Stanje: rabljeno, Leto izdelave: 1975, Wheel diameter – max. 160 - 1,600 mm Wheel width 250 mm Module – max. 20 Module – min. 1.5 Total power requirement 1 kW Machine weight approx. 3 t Space required approx. ... m K L I N G E L N B E R G Universal Gear Testing Machine for Involute and Helix Testing, Type PFSU 1600 Year of manufacture 1975, modernised in 1995 #B 2281 Working range: min./max. gear diameter: 160 – 1,600 mm Module range: 1.5 – 20 mm Maximum face width: 250 mm Measuring carriage stroke approx.: 300 mm Maximum helix angle: 0 – 90° Maximum centre distance in between centers: approx. 1,150 mm Overhang of the tailstock: 450 mm Chart recorder magnification: 50/250/500/1000 x Maximum test gear weight: approx. 4,000 kg Weight: approx. 3,000 kg Total drive: approx. 1 kW – 380 V – 50 Hz / Suitable for testing: - Tooth profile (involute) - Tooth direction (helix angle/lead) on internal and external gears, hobs, shaper cutters, worm gears, etc. - Tooth runout, surface roughness - Determination/reconstruction of the base circle and helix angle, etc. Accessories / special equipment: - Optical base circle setting and optical angle setting (no longer using base-circle discs) - High workpiece weight possible due to specific construction, testing sequence motorised or manual via handwheels - Rotatable mounting turntable Ø 480 mm for mounting larger gear blanks, with 2 sets of different extension supports (400 and 470 mm long) for max. gear diameter of 1,600 mm - Counterholder AV 17 for max. workpiece length of 1,150 mm - Separate electrical cabinet for control of manual movements as well as - GFM Computer Type ZMP 20 e with software for automatic gear measurement, updated in English and optionally in German, program update to current version V 21.17, ideal for generating modern test reports with graphics, graphical display on monitor, other subprograms, HP printer, flat screen - Various probe inserts, small parts, height-adjustable mount for a pitch measurement device (rear mounted), leveling feet, etc. - However, pitch measurement device not included. Mounting fixture available and installed at rear. Godpot Hwptofx Adkebr Condition: Very good – ready for demonstration, dismantled and reassembled by specialist.