Portalna Avtomatska Stružnica S 6 Vreteni nakup rabljenega (104.282)

Leto izdelave: 1987, stanje: rabljeno, številka stroja/vozila: 7.0176, Note: We have 6 units of this machine in stock! Manufacturer: Gildemeister Iiodjin Ub Tspfx Aptsf Type: GS 36 – 6 A/C Machine No.: 7.0176 Year of manufacture: 1987 Weight: 11 t General / Technical Data: Portal 6-spindle automatic lathe Spindle pitch circle diameter: 300 mm Number of longitudinal slides: 6 Number of cross slides: 2 Max. cross slide travel: 60 mm Max. longitudinal slide travel: 125 mm Spindle speeds: Infinitely variable 562 – 3373 rpm Main time range: Infinitely variable 1.95 – 78 sec. Nonproductive time range: 0.79 – 2.13 sec. Drive power: DC motor spindles 20 kW; feed drives 8 kW Footprint: approx. 1720 x 4700 mm Note: The machine cannot be converted for bar work. Equipment: – 1 creep feed drive for setup operation – 1 automatic central lubrication system – 1 coolant system with pipes and pump – 1 facing slide, position 3 (without cams) – 1 facing slide, position 5 – 6 longitudinal slides (without drive, without cams) – Feed for independent longitudinal slide, flexible, positions 1-6 – Programmable logic controller IPC 620 – Noise protection measures 80 dB – Automatic feed re-engagement with electric interlock on side door – Hinged belt chip conveyor – Machine version with DC drives for speed and feed – KIENZLE terminal 2450-07 with signal interface and data transmission control Accessories: Electrical configuration: The electrical equipment consists of a DC main drive with 20 kW power output for spindle drive and an AC servo motor for feed drive with 8 kW power output (protection rating IP 54), as well as the corresponding switching and control devices and necessary installation. Total connected load for the machine: 32 kW/h.

Stanje: rabljeno, Leto izdelave: 2012, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: AA2/001942, delovna širina: 230 mm, delovna višina: 120 mm, Oprema: CE označba, AVTOMATSKA PROFILIRKA S 6 VRETENI SCM MOD. SUPERSET NTPL – PO CE STANDARDIH - Konfiguracija vreten: Iiodpezcn A Refx Aptsf 1. Spodnje vodoravno 11 kW 2. Desno navpično 7,5 kW 3. Levo navpično 7,5 kW 4. Zgornje vodoravno 11 kW 5. Zgornje vodoravno 7,5 kW 6. Spodnje vodoravno 7,5 kW - Delovna širina: 230 mm - Delovna višina: 120 mm - Serijska št.: AA2/001942 - Leto: 2012

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 1995, 1995 Comec MMO/5-CL+CA vodoravni dletni stroj z dvojnim nihanjem, CE označen, s 6 vreteni. Največja dolžina obdelovanca: 65 cm. Iijdpfxox A T Drs Aptjf

Stanje: zelo dobro (rabljeno), Leto izdelave: 2012, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: AA2/001942, Avtomatski večstranski skobeljni stroj s 6 vreteni SCM mod. SUPERSET NTPL - V skladu s CE normativi - Konfiguracija vreten: 1. Spodnje vodoravno 11 kW Iedoywfkvopfx Aptsif 2. Desno navpično 7,5 kW 3. Levo navpično 7,5 kW 4. Zgornje vodoravno 11 kW 5. Zgornje vodoravno 7,5 kW 6. Spodnje vodoravno 7,5 kW - Serijska št.: AA2/001942 - Leto: 2012

Stanje: pripravljen za uporabo (rabljen), Colchester Master 3250 Lead-/Feed-Screw Lathe Engine Lathe Metalworking Lathe Swing over bed: 350 mm Swing over cross slide: approx. 196 mm Centre height: 170 mm Spindle bore: 42 mm Spindle speed: approx. 20–3250 rpm Distance between centres: 1250 mm Main motor: 7.5 kW (10 HP) Threads: Metric pitch 0.2–14 mm (51) Inch threads T.P.I. 2–56 (56) Module pitches 0.2–3.5 (20) Diametral pitch (D.P.) 8–56 (20) You are welcome to visit for an inspection. We are happy to arrange cost-effective shipping for you! You will receive a proper invoice. For foreign customers, a net invoice can also be issued, provided a valid VAT identification number is supplied. Subject to prior sale. Visit our shop and also take a look at our other offers. Company names and trademarks mentioned are the property of their respective owners and are only used for identification and product description purposes. Iijdpfx Asy Nknkjptsf Deviations from technical data or errors in the article description may occur and are subject to change.

Stanje: rabljeno, As-new CNC chuck lathe TAIKAN model HPT 08-380 Serial No. 2015122 Year of manufacture 2017 CNC linear control SIEMENS Sinumerik 828 D Basic Max. turning length without chuck: 350 mm Max. turning length with chuck: approx. 300 mm Turning diameter - nominal diameter: 250 mm Swing diameter over bed: 500 mm Iijdowz Rifepfx Aptsf Axis travel Z-axis: 385 mm Axis travel X-axis: 200 mm Feed rate (X + Z): 1-8000 mm/sec Rapid traverse speed (X): 30,000 mm/sec Rapid traverse speed (Z): 36,000 mm/sec Spindle speed: max. 4,500 rpm Spindle bore: 66 mm Draw tube inner diameter: 50 mm Spindle nose: presumably A2-6 Workpiece weight incl. chuck: max. 200 kg Spindle drive motor power: 11 kW Electrical connection: 400 Volt, 50 Hz - Electronic handwheel - USB, LAN data interface, + CF card - Disc turret with 12 tool stations - Hydraulic 3-jaw power chuck, Ø 215 mm - Stepless spindle speed - Coolant system - Chip conveyor with rear discharge + simple chip bin Machine footprint including chip conveyor: Length 2200 mm x Depth 2750 mm x Height 1700 mm Machine installation space required: Length 2200 mm x Depth 1750 mm x Height 1700 mm Chip conveyor installation space required: Length 2700 mm x Width 600 mm x Height 1400 mm Weight: 3.5 tons Very good condition – as new Machine comes from a showroom and has only a few operating hours.

Leto izdelave: 2002, stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, 3 main spindles with 70mm bar capacity FUNCTIONS The raw bar is machined in spindle 1 and 2 using a 12-position turret. Additionally, a 2-position front turret can operate on these spindles (for drilling or internal boring). After machining, the drum indexes. The pre-machined part is finish-machined and parted off/picked off in spindle 3 using a 12-position turret. Subsequently, the part is finish-machined in the counter spindle and unloaded by the unloading gripper (monitoring system included). The bar is fed forward and the drum indexes. TECHNICAL DETAILS Bar capacity: 70 mm Counter spindle Tool turrets: 5 units, VDI30 (CNC cross-slide) High-pressure internal coolant supply: two turrets Measuring system: direct, high-resolution on all X-axes Control: Siemens 840 D Powerline Tool monitoring: Artis Collet chucks: 4x Hainbuch SK65 Number of parallel tools: 5 Main spindle 1: Roughing of turned part Tool holder: 12-position turret Iodpfx Apon Uum Heteif Additional: Option for simultaneous work with a 2-position front turret Main spindle 2: Finishing of turned part Tool holder: 12-position turret Additional: Option for simultaneous work with a 2-position front turret Main spindle 3: Finishing, parting off, and backworking of turned part Tool holder: 12-position turret EQUIPMENT Bar feeder for bars up to 1,500 mm in length

Stanje: dober (rabljeno), MBO K760E S-KTL/6+ – stroj za zlaganje s stiskalnico SBAP 82ME Proizveden leta 2016. Iiodezlaimopfx Aptsf Format papirja: 760 x 1100 mm Največja hitrost: 180 m/min Visok sistem za podajanje skladov, podajalnik palet FP-95 6 vložkov na prvi enoti 2 noža 1 stranski vložek za nožem Dodaten vložek za furnir. Zvočna izolacija na vseh enotah MBO SBAP-82ME – stiskalnica za zlaganje Vključeni rezervni deli in dokumentacija. Stroj je v odličnem stanju in pripravljen za delo.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2006, Funkcionalnost: popolnoma funkcionalen, Avtomatska oprema za polnjenje izdelkov – PETBLOK 18 / 24 / 6 Proizvajalec – „NATE a. s.“ CHOTEBOR, Češka Letnik proizvodnje – 2006; Prostornina – 2000 steklenic/uro, prostornina 2,0 L; Uporaba: Izpiranje, polnjenje in zapiranje PET plastičnih steklenic različnih prostornin (0,3 ÷ 2,0 L) za vodo, brezalkoholne pijače ali pivo. Iodpoy Ru Dxofx Apteif Komplet vključuje: - 18 pozicij za izpiranje; - 24 ventilov za polnjenje; - 6 glav za zapiranje. Oprema je v popolnoma delujočem stanju. Cena vključuje tako zračne kot mehanske transporterje.

Stanje: rabljeno, Leto izdelave: 2004, Technical Data: Main Spindle: Maximum turning diameter: 33 mm Maximum speed: 8,000 rpm Drive power: 5.5 kW Drive power at 60% duty cycle: 7.5 kW Slide 1: Z1 travel: 320 mm X1 travel: 50 mm Y1 travel: 255 mm Rapid traverse speed: 30 m/min Ballscrew diameter: 25 mm Slide 1 Tool Mount: Tool positions Fixed, with tool shank 16 x 16 mm: 5 units Slide 2: X2 travel: 165 mm Z2 travel: 200 mm Rapid traverse speed: 30 m/min Ballscrew diameter: 30 mm Slide 2 Tool Mount: Number of turret stations with integrated spindle: 8 units Number of axial live tools (integrated): 8 units Iedpfx Aetzyx Toptoif Coolant tank, approx.: 400 l Coolant pump, max. capacity: 80 l/min Dimensions (LxWxH), approx.: 2460 x 1510 x 1750 mm Equipment: - Fanuc iT CNC control - Workpiece unloading system - IEMCA bar feeder - 5-position tool holder plate for slide 1 - Electrical interface and software for bar feeder - Collet chuck for main and sub-spindle - 2 double drill holders for rear machining support with cylinder - Sub-spindle parts ejector

Stanje: rabljeno, Leto izdelave: 1995, CNC-portalna plazemska rezalna naprava Iiodpfx Aeyay Dhjptef Proizvajalec: Messer Tip: Omnimat P 7000 Letnik izdelave: 1995 CNC-krmiljenje: Global Control Plus Širina tirnic: 7.000 mm 8 x avtogeni gorilnik, tip ALFA 8 x Omnilift 200 Brez tirnic Brez mize Brez filtra 3826ä

Stanje: zelo dobro (rabljeno), Leto izdelave: 2008, Swing diameter over bed: 32 mm Spindle bore: 32 mm Turning length: 125 mm Control: YASKAWA SIEMENS 840 DI V2 Clamping diameter: 32 mm Spindle speeds: 7,000 rpm Workpiece length – max.: 150 mm Feed rate: 0 – 2,000 mm/min Iiodpfx Apsvwgmyjtef Machine weight: approx. 5.7 t Required space: approx. 10.5 x 2 x 1.9 m The sliding headstock automatic lathe is in good condition, fully operational, and will be supplied with toolholders and spare parts. >> Two identical STAR 32T sliding headstock automatic lathes are available.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2007, Swing diameter over bed 32 mm Spindle bore 32 mm Turning length 125 mm Control YASKAWA SIEMENS 840 DI V2 Spindle speeds 7,000 rpm Workpiece length – max. 150 mm Ijdpfjxq Hk Uex Aptjif Clamping diameter 32 mm Feed rate 0 – 2,000 mm/min Machine weight approx. 5.7 t Space required approx. 10.5 x 2 x 1.9 m The sliding headstock automatic lathe is in good condition, ready for immediate use, and is supplied with tool holders and spare parts. >> There are two identical STAR 32T sliding headstock automatic lathes available.

Stanje: dober (rabljeno), Leto izdelave: 2016, CNC-portalna plazemska rezalna naprava Iodpfx Apsgqkc Njtjif Proizvajalec: Sato Tip: Satronik D5765 Letnik izdelave: 2016 CNC-nadzor: Satocontrol CNC 3010 Širina tirnice: 5.750 mm 6 x avtogeni gorilniki brez vodila brez mize brez filtra 3826

Stanje: rabljeno, Leto izdelave: 2007, številka stroja/vozila: 402235, Premer vretena: 36 mm, maksimalna hitrost vretena: 7.000 vrt/min. Os C, 1 revolverna glava, osi X/Z, 7 položajev + sinhrono vreteno, pogonjeni orodja, 1 revolver za orodja, osi X/Z, 6 položajev, pogonjeni orodja, upravljalnik INDEX C 200-4 D, obdelava zadnje strani, odstranjevanje obdelovanca, transportni trak, odvajalnik stržkov, avtomatski podajalnik palic MBL 52/3200. Stranke morajo ustrezno odsesati in odstraniti hladilno emulzijo/maziva. Iodezqy U Topfx Aptsif

Stanje: rabljeno, Leto izdelave: 2007, številka stroja/vozila: 511979, Dolžina obdelave: približno 400 mm, premer obdelovanca: 60 mm, os Y, protivreteno, 2 x 14-pozicijski rotacijski menjalnik orodij, križni suport X/Y/Z, nadzor osi B INDEX C 200-4 D, odvoz obdelovanca, transportni trak, odvajalnik ostankov, proizvajalec KNOLL, podajalnik palic MBL 65/3700, stroj potrebuje popravilo, zobniška črpalka je neupravljiva, stroški popravila glede na ponudbo: približno 6.000,00 € neto, stranka mora ustrezno odsesati in odstraniti vrtalno emulzijo/maziva. Ijdpfx Ajzqy Uyjptsif

Leto izdelave: 2018, stanje: rabljeno, številka stroja/vozila: 01165, največji premer obdelovanca: 42 mm, največja dolžina obdelave: 300 mm, nadzorni sistem FANUC Series 32I-Model B, filtrirna enota, 1 podajalnik palic BARLOAD Vito (nameščen na levi strani), leto izdelave: 2018, serijska številka: 22181649, teža: 980 kg, transportni trak (nameščen na desni strani), sistem za odvajanje žagovine, hladilnik olja HABOR, sistem za gašenje, brez orodij. Iiodpfxjzqy S So Aptof

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, prevoženi kilometri: 160.000 km, prva registracija: 06/2016, vrsta goriva: dizel, skupna masa: 2.743 kg, gorivo: dizel, barva: bela, emisijski razred: Euro 5, število sedežev: 6, Leto izdelave: 2016, Oprema: ABS, airbag, drsna vrata, klimatska naprava, meglenke, Fiat Scudo 6 sedežev Leto 06/2016 Dizel Ročni menjalnik s 6 prestavami + R Prostornina motorja 1.997 cm³ 94 kW (130 KM multijet) Euro 5B Nosilnost 826 kg Skupna masa 2.743 kg Skupna dolžina vozila 4.813 mm Klimatska naprava ABS Električna ogledala in okna 12-mesečna garancija na motor in menjalnik 160.000 km. Isdeyir U Repfx Aptjif

Stanje: pripravljen za uporabo (rabljen), Mitsubishi HA33C-S sinhroni servomotor SN:M54644060 + Tamagawa OSE 12.5KN-6-12-0 dajalnik SN:7945T, rabljen, z običajnimi sledmi uporabe, 100% delujoč, dobava kot na slikah. Iisdpfxoi D I N Uo Aptof

Stanje: rabljeno, Leto izdelave: 1971, Premer v obhodu 520 mm Premer struženja nad prečnim suportom 400 mm Iodpoy Nd S Asfx Aptsif Premer struženja v izrezu 1000 mm Dolžina struženja 1250 mm Območje vrtljajev vretena 11,2 - 1120 min⁻¹ Skupna potrebna moč 7 kW Teža stroja ca. 3,8 t Potrebni prostor ca. 2,7 x 1,7 x 1,7 m Stroj ima 4-kratni nosilec za orodja s hitromenjalnimi vložki in digitalni prikazovalnik.

Leto izdelave: 1984, stanje: pripravljen za uporabo (rabljen), Krmiljenje: Philips B2T, stroj trenutno ni v obratovanju, delno razstavljen, ventilator glavnega vretenskega motorja je bil popolnoma obnovljen, glavni pogon in mehanske skupine (vretena glava, revolver, kroglični vretenasti vijak) so v dobrem stanju, motor osi Z je okvarjen in je bil že strokovno odstranjen, hidravlični vpenjalni valj zahteva popravilo oziroma zamenjavo. Ogled na lokaciji je mogoč. Iiodpfoy Uyf Nex Aptef

Leto izdelave: 1985, stanje: pripravljen za uporabo (rabljen), Napetost: 380V, poraba toka: 125/118A, krmilje: Philips B2T 6, oprema: hidravlično krmiljeni revolverski glavi, zaprt delovni prostor z poševno posteljo, vpenjalna hidravlika, cevna napeljava, stanje: popolnoma funkcionalno, zelo dobro mehansko stanje, vizualno vzdrževano, delno obnovljeno, orodna revolverska glava: kodirnik kota popolnoma obnovljen, revolver taktira po podatkovnem listu popolnoma brezhibno in natančno, CNC krmilje: napajalnik strokovno obnovljen, glavni vretenasti pogon: delež zmogljivosti/pogon popolnoma obnovljen, s hidravličnim vpenjalnim vpenjalom in osnovnimi čeljustmi. Ogled na lokaciji je mogoč. Iijdey U Nqnspfx Aptof

Leto izdelave: 2008, stanje: pripravljen za uporabo (rabljen), Main spindle: max. bar capacity: 65 mm, draw tube bore: 75 mm, collet chuck diameter: 160 mm, centering chuck diameter: 175 mm, spindle nose: 140 mm, max. speed: 5,000 rpm, nominal torque (S1): 150 Nm, nominal power (S1): 22 kW. Counter spindle: draw tube bore: 45 mm, centering chuck diameter: 175 mm, spindle nose: 140 mm, max. speed: 5,000 rpm, nominal torque (S1): 100 Nm, nominal power (S1): 16.8 kW. W2 axis (counter spindle): travel: 690 mm, max. speed: 30 m/min, max. acceleration: 5 m/s², nominal feed force (S1): 5,000 N. X1 axis: travel: 165 mm, max. speed: 30 m/min, max. acceleration: 5 m/s², nominal feed force (S1): 5,000 N. Z1 axis: travel: 220 mm, max. speed: 30 m/min, max. acceleration: 5 m/s², nominal feed force (S1): 5,000 N. X2 axis: travel: 165 mm, max. speed: 30 m/min, max. acceleration: 5 m/s², nominal feed force (S1): 5,000 N. Z2 axis: travel: 150 mm, max. speed: 30 m/min, max. acceleration: 5 m/s², nominal feed force (S1): 5,000 N. X3 axis: travel: 165 mm, max. speed: 40 m/min, max. acceleration: 10 m/s², nominal feed force (S1): 2,400 N. Z3 axis: travel: 678 mm, max. speed: 30 m/min, max. acceleration: 5 m/s², nominal feed force (S1): 5,000 N. Y3 axis: travel: 80 mm (+50/-30), max. speed: 30 m/min, max. acceleration: 5 m/s², nominal feed force (S1): 5,000 N. Workpiece unloading (UA-WA): max. unloading weight: 4 daN, max. unloading diameter: 70 mm. Total number of tool stations: 12, tool holder diameter: 30 mm, driven positions: 12, max. speed of driven tools: 4,000 rpm, nominal torque (S1-n = 0 rpm): 17 Nm, nominal power (S1-n = 4,000 rpm): 2.9 kW, control: Siemens 840D, operator panel: ErgoLine, screen: color TFT 19", number of spindles (C-axes): 2, number of axes: 10, number of channels: 4. Total operating hours: 70,035 h powered on, 48,657 h in production, machine operates with cutting oil. Complete with documentation and bar feeder FMB Turbo 8-80 XT 3200. On-site inspection is possible. Iodpfeyln Ekjx Aptjif

Leto izdelave: 1993, stanje: pripravljen za uporabo (rabljen), A complete painting line is available, comprising the following equipment: 1) Sergiani S.p.A. Monomatic S, year of manufacture: 2001. 2) Finnrose FLT 6, year of manufacture: 1993. 3,4,5) Three identical Bürkle DAL1-1300 presses, year of manufacture: 1993. 6) Karl Heesemann FGA 6 EX, year of manufacture: 1993. 7) Finnrose FLT-4.5, year of manufacture: 1993. 8) Bürkle DAL2-1300, year of manufacture: 1985. Hackemack KTR 2040, year of manufacture: 1996. All machines are part of the painting system. On-site inspection is possible. Iiodpfetpp H Eox Aptef

Leto izdelave: 1993, stanje: pripravljen za uporabo (rabljen), Na prodaj je CNC stružni avtomat Traub, vključno s podajalnim magazinom in transporterjem za ostružke. Maks. premer palice: 42 mm, min./maks. premer materiala palice: 12 mm-42 mm, premer struženja: 42 mm, dolžina struženja: ca. 250 mm, maks. hitrost vrtenja: 4000 obratov/min, hod delovne vretena: 100 mm, podajalna sila delovne vretena: 1600 N, število utornih sani: 4, hod sani X: 60 mm, delovni hod utornih sani: 33 mm, podajalna sila utornih sani: 4 kN, hitri pomik utornih sani: 15 m/min, hitrost podajanja utornih sani: 2,5 m/min, dimenzije sani X/Y: 112 mm/320 mm, širina vodila: 30 mm, revolverske sani X/Z-os: ca. 80 mm/245 mm, hitri pomik X/Z: 15 m/min/15 m/min, podajalna sila X/Z: ca. 3200 N/9000 N, število orodnih mest: 8, premer vpenjanja orodja: 25,4 mm, maks. čas preklopa revolverja: ca. 0,9 s, dimenzija ostanka X/Y: 42 mm/240 mm, maks. dimenzije obdelovanca za obdelavo zadnje strani X/Y: 42 mm/100 mm, vzdolžni hod za obdelavo zadnje strani: ca. 115 mm, maks. hitrost vrtenja za obdelavo zadnje strani: 5600 obratov/min, navor obdelave zadnje strani: 18 Nm, razpon vpenjanja postaje za vrtanje/narezovanje navojev: 1 mm-16 mm, maks. delovni hod Q-os: 25 mm, maks. hitrost vrtalne vretena: ca. 3500 obratov/min, maks. hitrost narezovalne vretena: ca. 1000 obratov/min, teža: 3200 kg, dimenzije stroja: ca. 2500 mm/1120 mm/1620 mm. Ogled je možen po dogovoru. Iedpfx Apozipg Notjif