Ploščna Krožna Žaga Z Dovozo Skladišča nakup rabljenega (59.804)

Stanje: dober (rabljeno), Leto izdelave: 2014, Funkcionalnost: popolnoma funkcionalen, System consisting of: PANEL SAW SELCO WNT 610 / 4500 x 2200 mm PC-BASED CONTROL SYSTEM Max. cutting length: 4,500 mm Max. saw blade projection (main saw): 95 mm Max. opening width of clamps: 90 mm Min. panel dimensions fed from the rear: 1,830 x 915 mm Max. panel dimensions fed from the rear: 3,100 x 2,200 mm Min. panel thickness for rear feeding: 3 mm Working table height: 985 mm Main saw motor: 15 kW Main saw blade diameter: 380 mm Scoring saw motor: 2.2 kW Scoring saw blade diameter: 200 mm DIGISET: electronic setting of scorer to main saw QUICK CHANGE: fast blade swapping at the press of a button Saw carriage drive: 1 - 140 m/min. Integrated side aligner in saw carriage: 0 - 4,200 mm Automatic measurement system for manual cuts Pusher extension from 5,500 to 7,800 mm 10 pneumatic clamps on pusher with double fingers 3 front aligners 16 roller support rails behind the machine table 4 air flotation tables in front of the machine, rounded, including movement unit for table 2 Automatic ejection of end pieces beyond cut line Material support surface below pusher with brush rollers, suitable for delicate surfaces Machine table with air nozzles for sensitive surfaces Automatic main saw blade control device consisting of a sensor to detect blade flexion and a system to measure main spindle speed Software package: QUICKOPTI for optimizing cutting plans directly on the machine VERSION OSI PLUS INTERFACE OPTIPLANNING optimization software incl. hardware dongle, supports management of up to 10 users via network OS LABELLING: Graphic editor on the machine controller with piece drawing, real-time label printing possible MACHINE FEED SYSTEM COMMUNICATION - SELCO Industrial label printer on the machine Ndedpfexranpjx Anpsa STORAGE FEED SYSTEM RBO WINSTORE 2D STANDARD TRAVERSE 8000 MM Rotatable suction frame 0 - 180 degrees with controlled axis Panel alignment system / angle correction system consisting of 3 photocells mounted on pneumatic cylinders Panel weight detection via load cell mounted at the suction frame in the separating area, checks if the specific weight value matches the expected range for this panel type. If not, the panel is returned and the separation cycle restarts. Roller conveyor for stack loading/unloading 4,200 mm Software: LINE SUPERVISOR with stock mapping, catalogue, import of processing data from optimizer, management of parts lists, system control

Stanje: rabljeno, Leto izdelave: 2003, zavrtljiv, ni pa nagiben Premer žaginega lista 550 mm Luknja 50 mm Število vrtljajev 2800 1/min Ndodpfxezd Tiko Anpoa Motor z zavoro 3,0 kW Širina reza pri 90° 420 mm Širina reza pri 45° zavrteno 295 mm Višina reza pri 90° 200 mm Teža pribl. 330 kg Skladišče: Nattheim

Leto izdelave: 2006, stanje: pripravljen za uporabo (rabljen), Panel type: Core panels for 3-layer parquet, panel length: 2230mm, panel width: 782mm, panel thickness: 9mm-22mm, panel thickness tolerance: 0.5mm/panel, feed speed: 15m-50m/min, capacity: 12 cycles/min, working height: 1015mm, max. saw blade diameter: 250mm. Includes extraction system. Documentation available. On-site inspection possible. Ndodpot Amc Iefx Anpja

Stanje: zelo dobro (rabljeno), Catalogue number: 7853 TECHNICAL SPECIFICATIONS - Max diameter of main saw blade without scorer: 400 mm - Max diameter of main saw blade with scorer: 350 mm - Main blade electrically adjustable up/down and for tilt - Spindle diameter: 30 mm - Spindle lock - Comes with sliding table - Includes crosscut table & angle stop - Sliding table length: 3000 mm - Max cutting width at rip fence: 1350 mm - With side carriage - With scorer Ndedpfezum Diox Anpea - Max scorer blade diameter: 120 mm - Scorer motor power: 0.75 kW - Main motor power: 6 kW - Motor for height adjustment: 0.25 kW - Motor for angle adjustment: 0.25 kW - 3 spindle speeds: 3500/4500/6000 rpm - Main table dimensions: 1220 x 650 mm - Table extension/width: 1920 x 1450 mm - Large blade guard - Extraction port diameters: 80 mm, 125 mm - Overall dimensions (LxWxH): 3500 x 3460 x 1500 mm - Weight: 1000 kg ADVANTAGES – Polish-made – Equipped with scorer – Supplied with DTR documentation & CE certificate – Used machine, in very good condition Net price: 23,900 PLN Net price: 5,690 EUR (based on EUR exchange rate of 4.2) (Prices may vary depending on currency fluctuations)

Stanje: zelo dobro (rabljeno), CATALOG NUMBER 7541 Technical specifications: - Max main saw blade diameter (without scoring unit): 400 mm - Max main saw blade diameter (with scoring unit): 350 mm - Saw blade bore diameter: 30 mm - Max cutting height with 400 mm blade: 90° – 120 mm, 45° – 85 mm - Max cutting height with 350 mm blade: 90° – 95 mm, 45° – 67 mm - Main blade adjustable vertically and for bevel cuts - Saw blade guard included - Equipped with side sliding table - Cutting length on sliding table: 1700 mm - Cutting width on sliding table: 1400 mm - Cutting width at rip fence: 1350 mm - Main motor: 6 kW - Table dimensions: 1190 x 990 mm - With table extension: 1880 mm - With table elongation: 1890 mm - With scoring unit - Max scoring blade diameter: 120 mm - Scoring spindle diameter: 20 mm Ndedpsztavvsfx Anpsa - Scoring motor: 0.75 kW - 3 spindle rotation speeds: 3500, 4500, 6000 rpm - Brake - Extraction port diameter: 80/120 mm - Dimensions (LxWxH): 3050 x 2200 x 1600 mm - Weight: 800 kg ADVANTAGES – Manufactured in Poland – DTR technical documentation included – Saw blade guard – With scoring unit – With table extension and enlargement – Used saw, very good condition Net price: PLN 15,900 Net price: EUR 3,780 (based on an exchange rate of 4.2 EUR) (Prices subject to change with significant exchange rate fluctuations.)

Stanje: zelo dobro (rabljeno), Kataloška številka 7956 TEHNIČNI PODATKI - maks. premer glavnega žaginega lista: 350 mm - premer odprtine žaginega lista: 30 mm - maks. višina reza: 90 mm - glavni žagin list nastavljiv gor/dol in pod kotom - zaščita za žagin list - s stranskim vozičkom - dolžina reza na vozičku: 1300 mm - širina reza ob vodilu: 1340 mm - glavni motor: 4 kW - dimenzije mize: 1100 x 1030 mm - dimenzije mize z razširitvijo in podaljškom: 2100 x 1840 mm - s predrezovalnikom - maks. premer predrezovalnega lista: 100 mm - premer vretena predrezovalnika: 22 mm - motor predrezovalnika: 0,55 kW - 3 hitrosti vrtenja: 4000, 5000, 6500 obr/min - premer odsesovalnega priključka: 125 mm - mere d/š/v: 3280 x 2340 x 1450 mm - teža: 866 kg PREDNOSTI – proizvodnja Poljska – zaščita za žagin list – s predrezovalnikom – DTR dokumentacija – rabljena žaga, v zelo dobrem stanju Neto cena: 11.900 PLN Neto cena: 2.840 EUR (odvisno od tečaja 4,2 EUR) (Cene se lahko spreminjajo glede na večje nihanje) Nedpfxeztanro Anpjda

Stanje: zelo dobro (rabljeno), KATALOŠKA ŠTEVILKA 8066 Tehnični podatki: - največji premer diska: 400 mm - premer luknje diska: 30 mm - zaščita za disk - največja višina reza: 110 mm - največja širina reza: 700 mm - možnost rezanja pod kotom v navpični ravnini +90°/-90° (premik roke ali premik diska) - možnost vrtenja roke: desno/levo - motor: 3 kW - dimenzije mize: 1180 x 600 mm - premer odtočnega priključka: 60 mm, 120 mm - dimenzije (dolžina/širina/višina): 1340 x 1180 x 1600 mm - teža: 200 kg Prednosti: - italijanska proizvodnja - nelakirana Ndsdpfx Anezrwflspoa - zelo dobro stanje - rabljena žaga Neto cena: 8900 PLN Neto cena: 2120 EUR, odvisno od menjalnega tečaja 4,20 EUR (Cene se lahko spremenijo glede na večje nihaje menjalnega tečaja)

Stanje: zelo dobro (rabljeno), KATALOŠKA ŠTEVILKA 8017 TEHNIČNI PODATKI - širina gosenice 335 mm - širina valja 400 mm - največji premer rezila 350 mm - premer odprtine rezila 80 mm - največja višina reza 120 mm - širina mize s svetlobno odprtino 700 mm - dolžina mize 1720 mm Zgornji del: - odbijači/zaklepi - kovinski drsni pritisni valj - odbijači/zaklepi - kovinski drsni pritisni valj - valj z žagami - drsni pritisni kovinski valj, 2 kosa Spodnji del: - pnevmatsko vodilno letev - kovinski drsni valj - odbijači/zaklepi - gosenica - kovinski drsni izhodni valj - električno dviganje ohišja 0,35 kW - ročno dviganje valja z žagami - centralno mazanje - brezstopenjsko nastavljanje hitrosti podajanja 1,5 kW - glavni motor 30 kW - laser 3 kosi - plavajoče rezilo - dodatna tulec za večlistno žago - čiščenje žag - premer odsesovalnega priključka 260 mm - skupne dimenzije dolžina/širina/višina 2300x2000x2150 mm - teža približno 3000 kg Nodpfxezrmqws Anpoda PREDNOSTI – nemška proizvodnja – plavajoče rezilo – 3 laserji – čiščenje žag – dodatna tulec za večlistno žago – pnevmatsko nastavljiva vodilna letev – brezstopenjska regulacija hitrosti – rabljena večlistna žaga, zelo dobro stanje Neto cena: 136.900 PLN Neto cena: 32.595 EUR (glede na tečaj 4,20 EUR) (Cene se lahko spreminjajo glede na nihanja tečaja)

Stanje: novo, moč: 22 kW (29,91 KM), največja širina rezanja: 800 mm, skupna višina: 2.450 mm, skupna masa: 1.700 kg, število rezil: 2, Mebor board edgers are recognised by their strong and robust construction, giving reliability, high performance and low maintenance costs. VR machines can use up to 3 (5) moveable heads (blades) and are designed for both edging of boards and multi-ripping of cants. Mebor’s precision made frame ensures high precision of cutting and high quality of your products. Simple to highly automated versions are available. Upgrade to motorised infeed. Ndjdpfxerpmmae Anpja Re-feed guide for straight-edge boards. Positioning chains. Operator-free, OPTIMISED infeed with scanning & automatic positioning. Auto. blade positioning (1/2/3 mobile heads). Faster automatic blade positioning (1-5 mobile heads). VR Equipment & Options Infeed options Simple control options Outfeeds with separation of waste (simple outfeeds also available) For boards OVR – for 2 cuts For boards OCVR – for multiple cuts For boards & cants OSVR

Stanje: rabljeno, Leto izdelave: 2019, Premer žaginega lista: 350 mm Območje reza v ploščini pri 90°: 170 x 100 mm Nedpfsznxg Njx Anpeda Območje reza v ploščini pri 45°: 120 x 100 mm Območje reza v obliki kroga: 120 mm Pnevmatični sistem za napajanje žaginega lista Črpalka za hladilno tekočino / sistem za minimalno količino razprševanja Pnevmatično vpenjanje materiala Prednastavitev za rezanje nerjavečega jekla Dolžinski oporni člen z avtomatskim nastavljanjem do 6200 mm Valjčna pot s 1000 mm na levi strani Teža: približno 800 kg

Stanje: zelo dobro (rabljeno), Leto izdelave: 1999, Funkcionalnost: popolnoma funkcionalen, Večlistna krožna žaga K34/G/2200 Vzdolžno razrezovanje z obdelavo robov • Podajalna hitrost 2–48 m/min • Višina reza do 58 mm • Glavni motor 22 kW Ndodpfx Aozh U A Hsnpea • 9 žagnih listov + 2 robilnika

Stanje: novo, Leto izdelave: 2026, Enclosed and secure sawing area for increased safety thanks to a legally required saw blade guard Anti-rotation protection for the timber via stamped barbs in the rocking table Robust, torsion-resistant steel frame Transport device for easy mobility Impact, scratch, and weather resistant due to high-quality powder coating Phase inverter Dimensions and Weights Working height: 700 mm Rocking table support: 740 mm Length approx.: 1030 mm Width/Depth approx.: 770 mm Height approx.: 1095 mm Weight approx.: 92.5 kg Drive Type: Electric motor with direct drive Electrical Data Rated power: 5 kW Supply voltage: 400 V Mains frequency: 50 Hz Saw Blade Diameter: 700 mm Cutting Capacity Round wood in rocking table: 250 mm Location: ex stock 54634 Bitburg Ndedpjhkz Hiefx Anpsa - immediately available - Subject to prior sale

Stanje: novo, Leto izdelave: 2025, ALTENDORF F 35 Typ 3 - 1000 formátová pila s předřezem 7,5 kW (10 HP), 3 otáčky, Motorické nastavení výšky a naklápění, Velký bezpečnostní kryt, Dvojitý pojízdný vozík 3 200 mm, Předřezová jednotka s LED osvětlením, CNC podélný doraz, šířka řezu 1 000 mm, Digitální úhlový/mitrový doraz (Digit-L), Prodloužení/rozšíření stolu, S osvědčeným povrchem CDF ----- Technické údaje ----- Rozsah naklápění: 0 - 46 °, Délka vozíku: 3 200 mm, Max. délka řezu: 3 100 mm, Max. šířka řezu: 1 000 mm, Max. výška řezu: 154 mm, Max. průměr pilového kotouče: 450 mm, Ndedpfx Anexyl Ecopea Výkon motoru: 7,5 kW, Velikost obrazovky: 15 palců, Výška pracovního stolu: 910 mm, Průměr odsávacího hrdla: 80 + 120 mm Vybavení: Altendorf F 35 Typ: III - 1000 7,5 kW (10 HP), 3 otáčky (M51064) Digitální úhlový/mitrový doraz Digit L - volitelně (M44154) Místo: skladem 54634 Bitburg - ihned k dispozici -

Stanje: novo, Leto izdelave: 2025, Formatna krožna žaga ALTENDORF F 35 Tip 1 - 1000 Top za masivni les - Nova naprava - takoj dobavljiva iz skladišča Bitburg - Nsdpfx Asxyl Epjnpjda Moč motorja 7,5 kW, 400 V, 50 Hz, 3 hitrosti Motorizirano dviganje in nagibanje Velik zaščitni pokrov Dvojni voziček 3.200 mm Priprava za predrezovalec Vzporedno vodilo, širina reza 1.000 mm Kotno-poševni prislon 3.450 mm, brez dolžinskega izravnanja Podaljšanje/razširitev mizne plošče: površina s prašnim premazom Območje nagiba žaginega lista: 0 - 46 ° Dolžina vozička: 3.200 mm Dolžina reza: 3.100 mm Širina reza: 1.000 mm Višina reza: 154 mm max. Ø žaginega lista: 450 mm Velikost zaslona: 15 palcev, Višina delovne mize: 910 mm, Priključek sesalnika Ø: 80 + 120 mm Vključene možnosti: M45102 Vzporedno vodilo 1000 mm Digit_X Lokacija: iz zaloge 54634 Bitburg - takoj na voljo -

Stanje: rabljeno, Kapna in kotna žaga za aluminij EISELE tip LMS II HVG-225 Št. stroja: 0107, Letnik: 1980 Območje žaganja 90° = 150 x 100 mm Ndedpfxezinzrs Anpoa 45° = 120 x 100 mm Maksimalni premer žaginega lista: 400 mm Kotni rez: +/- 45° Hitrost vrtenja žaginega lista: 1700 / 3400 1/min Moč motorja: 1,4 / 1,9 kW Električni priklop: 380 V, 50 Hz Velikost mize pred kotnim prislonom: 580 x 350 mm - Motor tip RF 1,5 / 4 / 2-7 - Žagalni agregat nagiben za šifterski rez 45° levo - Stroj opremljen z žaginim listom za aluminij Ø 400 mm - Priključek za cev za odsesavanje odrezkov Ø 80 mm - Stabilno kovinsko ogrodje Potrebna površina D x Š x V: 1050 x 1020 x 1700 mm Teža: 150 kg V dobrem stanju

Stanje: dober (rabljeno), Leto izdelave: 1992, Altendorf F45 Dgit X, krožna žaga za rezanje, v popolnoma delujočem stanju. Digitalni prikazovalnik za vzporedni vodilni profil je še prisoten. Merilna letev in tipalo sta na voljo. Digitalni prikazovalnik za nastavitev kota je popolnoma delujoč. Moč: 5,5 kW (glavni motor) in 0,75 kW (predrezovalni motor) Dolžina voznega okvirja: 280 cm Premer žaginega lista: maks. 350 mm Dolžina vzporednega vodila: do 1.250 mm vključno z dodatnim pomožnim vodilnim profilom (zložljiv) Nodpfx Ansznipbspjda Žaga je bila izdelana leta 1992 in je bila uporabljena v učni delavnici. Po dogovoru je možen transport s tovorno službo. #8504

Stanje: dober (rabljeno), Hladna krožna žaga, krožna žaga za kov, kotna žaga, krožna žaga, žagalna naprava, kovinska žaga -Proizvajalec: MEP, hladna krožna žaga za kov tip TRL 300, nagibna na obe strani -Motor: tip C 112 M -Moč: 2,2 / 3,0 kW -Hitrost: 720 / 1450 obr/min Ndodpfsxlzytjx Anpja -Krožna žaga: Ø 315 mm -Območje reza pri 90 stopinjah plosko: 110 x 70 mm -Območje reza pri 45 stopinjah: 100 mm -Dodatki: vklj. 2 krožna rezila, glejte slike -Mere: 1230/630/V1800 mm -Teža: 273 kg

Leto izdelave: 1979, stanje: dober (rabljeno), Underslung circular saw, cross-cut saw, pull saw, chop saw, panel saw, table saw, aluminium circular saw, panel sizing saw -Manufacturer: Martin, panel saw model T 70 with automatic feed -Motor power: 11 kW Nodpohfufgofx Anpeda -Speed: 1445 rpm -Saw blade: Ø 410 x 5 mm -Max. cutting height: 140 mm at 90° / 110 mm at 45° -Mitre cut: up to 45° -Sliding table: 355 x 1500 mm -Overall dimensions: 2275/2010/H1400 mm -Weight: 1058 kg

Stanje: zelo dobro (rabljeno), Leto izdelave: 2002, številka stroja/vozila: 3398, Funkcionalnost: popolnoma funkcionalen, vhodna napetost: 380 V, vhodna frekvenca: 50 Hz, največja višina reza: 200 mm, premer osi rezila: 70 mm, Oprema: CE označba, VEČLISTNA KROŽNA ŽAGA Z 2 GREDAMA COSMEC MOD. SMB200 - Maksimalna višina reza: 200 mm Njdpeywd Nkefx Anpsda - Širina traku: 400 mm - Spremenljiva napredovalna hitrost: 5–30 m/min - Moč glavnih motorjev: 2 x 45 kW - Premer osi žaginega lista: 70 mm - Serijska št.: 3398 - Napetost: 380/50 - CE - Leto izdelave: 2002

Stanje: rabljeno, Leto izdelave: 2015, Funkcionalnost: popolnoma funkcionalen, VEČLISTNA KROŽNA ŽAGA CML MOD. SCA J350RT - V SKLADU S CE NORMAMI - 2 pomični listi - 37 kW Nodpfx Aox Run Ronpjda - Leto izdelave: 2015

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Motor power: 2.2 kW Manual feed of units Blade diameter: 330 mm 3000 rpm Maximum distance between units: 3300 mm Cutting angle adjustment: -45/+45 degrees Ndodpfjy N Ribsx Anpoa Vertical pneumatic clamps Cutting process activated by foot pedal Emergency stop switch Width: 900 mm, height: 1500 mm

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, 6226 OMS INVINCIBILE OK 330 Double Mitre Saw Nodpoy N Rg Tefx Anpjda Motor power: 1.8 kW Manual movement of cutting units Blade diameter: 330 mm Speed: 3000 rpm Maximum distance between units: 3500 mm Cutting angle adjustment: -45/+45 degrees Pneumatic vertical and horizontal clamps Cutting process started by dual-button operation Safety switch Width: 900 mm, height: 1500 mm Year: 2003

Stanje: zelo dobro (rabljeno), Leto izdelave: 2013, I am selling a panel saw with scoring unit. Manufacturer: FELDER Model: K975 Year of manufacture: 2013 Nedpfxstt Nq Do Anpeda Cutting length: 3200 mm Cutting width: 1350 mm Maximum cutting height: 130 mm (saw blade diameter 400 mm) Saw blade and scorer tilting: 0-45°, digital Saw blade and scorer height adjustment: digital Rip fence adjustable manually Main saw blade and scorer can be switched on from the control panel. Main saw blade and scorer can also be switched on from the aluminium sliding table. Main motor panel saw: 5.5 kW (7.5 HP) (speed adjustable: 3500/4500/5500 rpm) Scoring unit motor for panel saw Tools, options, and accessories as shown in the pictures are included in the price. Very good condition. Available immediately.

Stanje: novo, Leto izdelave: 2023, SPECIAL PRICE, Stock Machine Year 2023! List price for standard machine + "LUBETOOL" minimal lubrication system option: €28,810 STOCK MACHINE – Fully Automatic Aluminum Circular Saw, 90° Cut with drilling unit TR 12 (up to ø 10 mm) or TR 20 (up to ø 20 mm), offering simple, safe operation and outstanding cutting performance. This machine is designed exclusively for 90° cuts! In a single operation, workpieces can be drilled and cut to length. Ndjdpfsmftiwox Anpea Technical Data: ● Cutting capacity: 90° round: 100 mm / square: 100 x 100 mm / rectangular: 170 x 60 mm ● Drive power: 1.9 kW / 400 V / 50 Hz ● Speed: 3,000 rpm ● Feed: Simple stroke 300 mm (double stroke up to 600 mm) ● Max. cutting height: 100 mm ● Blade size: 350 x 32 mm Standard Equipment: ● 90° cut machine with powerful drive motor ● Clearly arranged, large control panel ● Adjustable cut length from 5 to 300 mm via handwheel and counter ● Main clamp with 3 pneumatic cylinders, 1 horizontal, 2 vertical ● Feed clamp with horizontal and vertical pneumatic cylinder ● Large safety guard covering the entire working area, pneumatically lifted ● Adjustable cutting and feed speed ● Air gun for cleaning the machine ● Connections for extraction system ● TR 12 or TR 20, fixed automatic drilling unit with single tool holder, spindle speed, drilling depth adjustments, etc. done manually; drilling cycle is automatic ● Optionally fitted to stock machine: "LUBETOOL" minimal lubrication system with two pumps --> Also available as CNC version or in various sizes!

Stanje: novo, Leto izdelave: 2026, max. cutting height: 200 mm max. cutting width: 400 mm max. passage width: 490 mm feed speed: 5–30 m/min saw motors: 2 × 37 kW (higher power available) feed motor: 2.2 kW saw shaft diameter: 70 mm Njdpfx Aneu I Dujpsda saw blade diameter: 325 mm weight: 2,800 kg Standard features: electric height adjustment for upper rollers Optional equipment: laser with adjustment mechanism driven roller conveyors electronic braking system