Optimum L28 Hs Cnc nakup rabljenega (12.552)

Stanje: kot nova (razstavni stroj), Leto izdelave: 2026, Machine is on display. Optiturn L28 HS CNC lathe - directly from the manufacturer. L28 HS - The OPTIMUM CNC lathe equipped with Siemens SINUMERIK 808D Advanced PPU 150 control. - Reinforced machine bed made of cast iron - High-quality spindle bearing - Emergency stop push-switch - Centralized lubrication system - Reference switches - Maintenance-friendly protective enclosure - Rear maintenance access panel - Safety switch on the front sliding door - Turret positioned behind the turning center (left-hand turning tools) - Linear guides - Software package “SINUMERIK 808D on PC” included (practical training software allowing workpieces to be programmed and simulated offline on a PC; free to download) - Includes two-year SIEMENS warranty Technical Data Electrical connection: 400 V / 3 Ph ~50 Hz Total connected load: 3.75 kVA Spindle - Drive motor (S1 operation): 2.2 kW - Torque drive motor (S1 operation): 14 Nm - Torque at spindle: 28 Nm - Spindle mount: DIN 6350 A2-3 - Spindle taper: 5C - Spindle bore: Ø 30 mm Coolant System - Coolant pump power: 95 W - Tank capacity: 25 liters Machine Data - Center height: 169 mm - Center distance: 430 mm - Swing over cross slide: Ø 200 mm - Swing over bed: Ø 300 mm Speed Range - Spindle speeds*: 40 - 4,000 rpm Tool Turret Hfodpfx Ajzi Er Ish Ton - Type: Electric - Number of tool stations: 6 tools - Maximum tool shank size (square): 16 mm - Maximum boring bar diameter: 16 mm Precision - Repeatability: ± 0.01 mm - Positioning accuracy: ± 0.01 mm Travel - X-axis: 145 mm - Z-axis: 465 mm Feed Rate - X-axis: 10,000 mm/min - Z-axis: 12,000 mm/min Machine leasing available via Siemens Finance (subject to liquidity).

Stanje: kot nova (razstavni stroj), Leto izdelave: 2026, The machine is on display. Optiturn L34 HS CNC lathe - Directly from the manufacturer. L34 HS – The OPTIMUM CNC lathe with Siemens SINUMERIK 808D Advanced PPU 150 control system. - Reinforced machine bed made of grey cast iron - Sophisticated spindle bearing system Hfedpjzi Evgefx Ah Tjn - Emergency stop punch button - Central lubrication - Spindle and feed motors supplied by Siemens - Maintenance-friendly protective enclosure - Rear service access panel for maintenance - Safety interlock on the front sliding door - Turret is located behind the turning center (left-hand turning tools) - Linear guideways - "SINUMERIK 808D on PC" software package included (practical training software that allows workpieces to be programmed and simulated offline on a PC; free to download) Technical Data Electrical connection: 400 V / 3 Ph ~50 Hz Total connected load: 6.5 kVA Spindle - Drive motor (S1 operation): 3.7 kW - Drive motor torque (S1 operation): 23.6 Nm - Torque at spindle: 40 Nm - Spindle mount: DIN 6350 A2-3 - Spindle bore: Ø 46 mm Coolant system - Coolant pump power: 95 W - Tank capacity: 75 liters Machine Data - Center height: 165 mm - Center distance: 600 mm - Swing over cross slide: Ø 146 mm - Swing over bed: Ø 350 mm Speed range - Spindle speeds*: 30 - 3500 rpm Tool Turret - Type: Electric - Number of tool stations: 6 tools - Maximum square tool size (height/width): 16 mm - Maximum boring bar diameter: 16 mm Accuracy - Repeatability: ± 0.01 mm - Positioning accuracy: ± 0.01 mm Travel - X-axis: 145 mm - Z-axis: 465 mm Feed rate - X-axis: 6,000 mm/min - Z-axis: 8,000 mm/min Machine leasing available through Siemens Finance, subject to liquidity.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2019, Funkcionalnost: popolnoma funkcionalen, izvrtina vretena: 30 mm, hitrost vretena (min.): 40 obr/min, potovalna razdalja osi X: 145 mm, pomik po osi Z: 465 mm, največja hitrost vrtenja: 4.000 obr/min, širina na sredini: 650 mm, višina središča: 150 mm, nosilnost: 1.200 kg, globina grla: 4.000 mm, For sale is an as-new CNC lathe from the brand OPTIMUM, model OPTIturn L28HS. The machine is in like-new condition, originating from a vocational training institute (BFI), and was used exclusively for training purposes (setup and program transfer). Technical data: Control: Siemens Sinumerik 808D Advanced Year of manufacture: 2019 First commissioning: 2021 Center height: 150 mm Distance between centers: 650 mm Swing diameter over bed: 300 mm Swing diameter over cross slide: 200 mm Speed range: 40–4,000 rpm Spindle mount: Iso 702-1 No.3 – Type A2 Spindle bore: 32 mm Spindle motor power: 2.2 kW Spindle torque: 28 Nm Tool turret: 8 stations Tool holder: VDI 20 X-axis travel: 145 mm Z-axis travel: 465 mm Tailstock taper: MT2 Quill stroke: 80 mm Required installation space: 1,655 x 1,485 x 1,955 mm Note: The machine hours can be read out on site if you have the necessary knowledge. Since the machine was only used for training purposes, very low operating hours can be expected. Tools and tool holders are not included in the offer. Transport and loading can be organized Europe-wide upon request, subject to additional costs. Hfsdpfx Ahjy D Hkqs Ton Prices are plus VAT. Inspection available by appointment. Contact us – our team looks forward to assisting you. Trade-in or exchange possible! Machinery purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE. Are you looking for a high-quality yet affordable metalworking machine for your production, or do you want to sell one? For further information or to get in touch, visit our website.

Stanje: pripravljen za uporabo (rabljen), Ponujamo CNC stružnico Optimum. Premer obdelovanca nad strojno posteljo/podreznim sledilcem: 300 mm/200 mm, razdalja med centri: 430 mm, hod osi X/Z: 145 mm/465 mm, hitri hod osi X/Z: 10 m/min/12 m/min, premer obdelovanca za obdelavo palic: 30 mm, premer vretena: 30 mm, največja hitrost vretena: 4000 vrt/min, število orodnih mest: 6, krmilni sistem: Siemens SINUMERIK 808D ADVANCED. Dimenzije stroja X/Y/Z: približno 1655 mm/1590 mm/1955 mm, teža: približno 832 kg. Možnost ogleda na kraju samem. Hsdpfx Ahoztdtxj Tofn

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, The machine is located in the showroom and has only been used for demonstration purposes. Optiturn S400 HSC CNC Premium CNC lathe direct from the manufacturer. S400 HSC – The OPTIMUM premium CNC turning machine with Siemens SINUMERIK 828D control system stands out for its performance, speed, precision, and long service life. Heavy-duty construction · Compact design · SIEMENS servo motors on all axes · Renishaw measuring arm for tool measurement · All servo motors with integrated encoder for maximum accuracy · Main spindle implemented as motor spindle · 45° slant bed for particularly large machining diameters and unobstructed chip discharge into the chip tray · Hydraulic three-jaw chuck Ø 170 mm with soft jaws · Servo tool changer VDI 30 with 12 tool stations · Hardened and precision-ground ball screws for high rapid traverse speeds on all axes · Faster tool change speed · High hydraulic clamping force · Heavy-duty machining without vibration, for automated machining and high efficiency even under extreme conditions · Rigid linear guides ensure long service life with maximum static and dynamic stiffness · Device for manual tool measurement · Heat exchanger · Portable electronic handwheel with enabling button and emergency stop switch makes program setup significantly easier · Belt-type chip conveyor for efficient removal of chips · Work light for complete illumination of the working area Hfjdpfxeymlhrs Ah Tjn · Coolant system with cleaning gun · RJ45 and power interface · EMC (electromagnetic compatibility) · Additional SIEMENS material defect liability and free online/on-site service OSS Plus; see "SIEMENS OSS Plus Package" on page 117 · 1 year basic maintenance contract included Machine specifications Electrical connection: 400 V / 3 Ph ~50 Hz Total connected load: 25 kVA Spindle Drive motor S1 operation: 11.6 kW Torque drive motor S1 operation: 65 Nm Drive motor S6-30% operation: 14.4 kW Torque drive motor S6-30% operation: 81 Nm Spindle mount: A2-5 Spindle bore: Ø 56 mm Chuck passage: Ø 45 mm Hydraulic chuck: Ø 170 mm Coolant system Coolant pump output: 700 W Tank capacity: 160 liters Hydraulic system Hydraulic pump output: 1.5 kW Tank capacity: 36 liters Machine data Max. turning diameter: 220 mm Turning length: 320 mm Swing diameter over cross slide: 300 mm Swing diameter over bed: 500 mm Slant bed: 45° Speed range Spindle speeds*: 30 - 6,000 min⁻¹ Tool changer Type: Servo VDI 30 Number of tool stations: 12 Accuracy Repeat accuracy: ±0.004 mm Positioning accuracy: ±0.004 mm Travel X-axis: 180 mm Z-axis: 350 mm Feed force, dynamic X-axis: 3.6 kN Z-axis: 3.6 kN Feed rate X-axis / Z-axis: 30 m/min Motor torque X-axis / Z-axis: 6 Nm Dimensions Length x width x height: 2,000 x 2,250 x 1,550 mm Total weight: 2,600 kg

Stanje: zelo dobro (rabljeno), Leto izdelave: 2013, Rabljena avtomatska tračna žaga MEP SHARK 310 CNC HS Dimenzije rezila: 4640x34x1,1mm Variabilna rezalna hitrost rezila: 15-115m/min Kapaciteta reza: okroglo 310mm , kvadrat 310x310 Avtomatski napenjalec lista Avtomatski odstranjevalec opilkov Dodatna oprema: vertikalni primež Teža stroja: 2200kg Stroj je v odličnem stanju in bo v celoti prgledan in servisiran. Hjdpfx Ahjyyuxno Tefn

Stanje: zelo dobro (rabljeno), Leto izdelave: 2018, Funkcionalnost: popolnoma funkcionalen, Nadzorna enota SIEMENS 828D z vmesnikom USB in zaslonom LCD. Dimenzije mize: 1200 x 600 mm. Velikost T-utora: 16 mm. Število T-utorov: 5. Razdalja med T-utorji: 100 mm. Maksimalna nosilnost: 800 kg. Avtomatski hod osi X: 1050 mm. Avtomatski hod osi Y: 600 mm. Avtomatski hod osi Z: 600 mm. Vretenčna konica: SK40 DIN69871. Območje vrtljajev: 10000 vrt/min. Kapaciteta skladišča: 30 orodij. Moč pogona: 11 kW. Potreba po električni energiji: 400 V / 40 kVA / 3 x 32 A. Teža: približno 7000 kg. Dimenzije (D x Š x V): 4319 x 2300 x 3000 mm. Oprema in dodatna oprema: - Modul SHOPMILL v nadzorni enoti. - Sistem za odvajanje stržkov. - Sistem za hlajenje. - Ročno kolo, ki ga je mogoče odstraniti. - LED osvelitev. - Hladilnik vretena. - Priročniki. Stroj se prodaja zaradi likvidacije podjetja. V zelo dobrem stanju. Trenutno je stroj vključen v naš razstavni prostor. Hedpfx Aez Ih E Eeh Tsfn

Leto izdelave: 2016, stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: MACH1097, Prodajam zanesljivo in natančno brusilno napravo francoskega vrhunskega proizvajalca Forézienne (MFLS), ki je namenjena avtomatskemu in kakovostnemu brušenju tračnih žag in obnovi profila. Zahvaljujoč natančnemu CNC-nadzoru naprava zagotavlja enakomerno geometrijo zob žage, podaljšuje življenjsko dobo rezalnih orodij in bistveno skrajšuje čas nastavitve. Naprava je pripravljena za industrijsko uporabo, vzdrževana in primerna tako za bruseče centre kot za lesno industrijo. Hsdjzxpkmepfx Ah Tjfn

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, Stroj je razstavljen. OPTIMILL F 200 HSC Premium CNC-rezalni stroj, neposredno od proizvajalca. F 200 HSC – OPTIMUM Premium CNC-rezalni stroj s krmilnikom Siemens SINUMERIK 828D se odlikuje po zmogljivosti, hitrosti, natančnosti in dolgi življenjski dobi. Močna izvedba · Visoka produktivnost · Visoka zanesljivost · Masivna, togo ojačana konstrukcija stroja, odporna na torzijo · Profilne tirnice z valjčnim vodilom za visoke hitrosti gibanja v vseh osi · Močni servomotorji v vseh treh osi · Teleskopska zaščita vodil v vseh treh osi · Avtomatsko mazanje · Masivna, natančna miza za rezanje s petimi T-utorami, velike dimenzije in natančno brušena · Prenosni, elektronski ročni krmilnik z gumbom za premik in stikalom za nujni postanek olajša uvoz programov Nwswouy Tckex Eb Ncsi · Sistem za hlajenje z odvajanjem sekancev in čistilno pištolo · Notranje hlajenje vretena z 20 bar · Transportni sistem za sekance v pasovni izvedbi zagotavlja učinkovito odstranjevanje sekancev · Voziček za sekance · RJ45 priključek in električni priključek 230 V · Zaprt nadzorni omara z vgrajenim toplotnim izmenjevalnikom zagotavlja optimalno temperaturo in preprečuje vdor umazanije · Strojna luč na delovnem prostoru Hfjdpfxozi Ex Ue Ah Tsn · Dodatni paket SIEMENS – garancija za pomanjkljivosti materiala in brezplačna spletna/na kraju samem storitev OSS Plus · 1 leto osnovnega servisnega paketa, vključeno v D/A/CH Rezalno vreteno - vreteno v liniji Podatki o stroju Električni priključek 400 V / ~50 Hz Skupna priključna moč 20 kVA Rezalno vreteno Pogonski motor, neprekinjen obrat S1 10,5 kW Navor pogonskega motorja, neprekinjen obrat S1 50 Nm Pogonski motor, občasen obrat S6-30% 26,4 kW Navor pogonskega motorja, občasen obrat S6-30% 125 Nm Vretenčni vmesnik SK 40 / DIN 69871 Sistem za hlajenje in mazanje Moč črpalk za hlajenje, 3 kos 1 kW Pretok 35 l/min Prostornina rezervoarja 200 litrov Čistilna črpalka Moč čistilne črpalke 530 W Natančnost rezanja Ponovljivost ± 0,005 mm Natančnost pozicioniranja ± 0,005 mm Menjava orodja Tip: dvojno ročni manipulator Število mest za orodje 24 Premer orodja, maks. 78 mm Premer orodja (dodatna mesta, prosta) maks. 120 mm Dolžina orodja 300 mm Teža orodja, maks. 8 kg Čas menjave orodja: od orodja do orodja 2,5 sekunde Gib Osi X 850 mm Osi Y 500 mm Osi Z 550 mm Pogon za premikanje Hitrost gibanja osi X, Y, Z 48 m/min Navor motorja Osi X / Y / Z 16 Nm / 16 Nm / 20 Nm Sile za premikanje Osi X / Y / Z 5,34 kN / 5,34 kN / 6,68 kN Območje hitrosti Število vrtljajev* 12.000 min-1 Pnevmatski sistem Zračni tlak 6 - 8 bar Poraba zraka na uro 6 - 8 kg/m³ Miza za rezanje Razdalja vreteno - miza 100 - 650 mm Dolžina x širina mize 1.000 x 500 mm Velikost T-utora / število / razdalja 18 mm / 5 / 100 mm Maksimalna nosilnost 500 kg Dimenzije Dolžina x širina x višina 2.400 x 2.355 x 2.860 mm Skupna teža 5.500 kg

Stanje: kot nova (razstavni stroj), Leto izdelave: 2022, Machine on display. Optimill F 310 HSC Premium CNC Milling Machine direct from the manufacturer. F 310 HSC – The OPTIMUM Premium CNC Milling Machine with Siemens SINUMERIK 828D control system stands out for its performance, speed, precision, and long service life. • Heavy-duty construction • High productivity • High reliability • Strongly ribbed, torsion-resistant machine base • Profile rail with roller circulation in all axes for high load capacities • High-torque servo drives, direct to the ballscrews in all three axes • Precision-ground, preloaded high-performance ballscrews for rapid traverse speeds on all axes • Telescopic guideway covers on all three axes • Main spindle SK40 with spindle speed up to 12,000 rpm with inline spindle • Massive, precise milling table with five T-slots, large dimensions and precision-ground • The portable electronic handwheel with enabling switch and emergency stop button greatly facilitates program setup • Tool changer with 30-tool dual-arm gripper • Coolant system with chip-flushing setup and cleaning gun • Internal spindle coolant 20 bar • Band-type chip conveyor provides efficient chip removal • Chip trolley • Oil separator • Machine light in the work area • Additional SIEMENS package: warranty on material defects and free OSS Plus online/on-site service • 1-year Basic maintenance contract included in DE/AT/CH • Control • 15.6" color display • 16:9 format • Complete Package • Safety Integrated • Residual material detection and processing • ShopMill step programming • Manage network drive • 3D simulation • Trace function • Equipment Details Hodoynf Unepfx Ah Tjfn • Inline spindle • Tool holder SK 40 / DIN 69871 • Spindle speed 12,000 rpm • Dimensions and Weights • Length: approx. 4319 mm • Width/Depth: approx. 2300 mm • Height: approx. 3000 mm • Weight: approx. 7000 kg • Rapid Traverse Speed • X-axis: 30 m/min • Y-axis: 30 m/min • Z-axis: 30 m/min • Electrical Data • Connection voltage: 400 V • Mains frequency: 50 Hz • Electrical connection • Total connected load: 56 kVA • Horizontal Milling Table • Length: 1200 mm • Width: 600 mm • T-slot size: 16 mm • Number of T-slots: 5 • T-slot spacing: 100 mm • Max. load capacity: 800 kg • Accuracy • Repeatability: ± 0.005 mm • Positioning accuracy: ± 0.005 mm • Travel • X-axis automatic: 1050 mm • Y-axis automatic: 600 mm • Z-axis automatic: 600 mm • Vertical Spindle • Spindle taper: SK 40 DIN 69871 • Speed range: 12,000 rpm • Main drive motor continuous operation S1: 20 kW • Main drive motor S6-30% operation: 50.3 kW • Main drive motor torque continuous S1: 96 Nm • Torque at 30% duty cycle S6: 240 Nm • Feed Force • X-axis feed force: 6.68 kN • Y-axis feed force: 6.68 kN • Z-axis feed force: 10 kN • Feed Motor Torque • X-axis continuous S1: 18 Nm • Y-axis continuous S1: 18 Nm • Z-axis continuous S1: 27 Nm • Tool Changer • Double arm gripper • Number of tool positions: 30 • Max. tool length: 300 mm • Max. tool weight: 8 kg • Tool-to-tool change time: 2.5 s

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, The machine is on display. Optiturn Premium CNC lathe, direct from the manufacturer. S600M – The OPTIMUM Premium CNC lathe equipped with Siemens SINUMERIK 828D control system. • Heavy-duty design • Renishaw probing arm for manual tool measurement • Ball screw drive with enhanced accuracy, rigidity, and thermal stability • Siemens servo motors on all axes • All servo motors with integrated encoder for highest precision • 45° slant-bed design for particularly large components Hodpfeymk Uksx Ah Tjfn • Hydraulic three-jaw chuck, Ø 200 mm • Sauter tool turret VDI 40 with 8 tool positions and driven tools • Hardened and precision ground ball screws for high rapid traverse speeds on all axes • Manual tool measurement setup • Tailstock with hydraulic quill • Heat exchanger • Portable electronic handwheel with enabling switch and emergency-stop strike switch greatly facilitates program setup • Belt-type chip conveyor • Work lamp for full illumination of the workspace • Coolant system with cleaning gun Linear guides • Maximum static and dynamic rigidity • High positioning accuracy • Smooth, backlash-free movement • Hydraulic VDI 40 turret • All 12 stations powered by an integrated motor designed for speeds up to 4,000 rpm Machine bed • Heavily ribbed • 45-degree slant • High stiffness and durability • Facilitates chip removal SAFETY Integrated – Setup operations with door open • Functional safety also protects against high costs! Complete package • Safety Integrated • Remnant material detection and processing • ShopMill step programming • Manage network drives • 3-D simulation • Path tracking SIEMENS OSS Plus additional packages • 12 months; item no. 3589020 • 24 months; item no. 3589021 • 36 months; item no. 3589022 Dimensions and weights Length approx. 4570 mm Width/depth approx. 1845 mm Height approx. 1955 mm Weight approx. 4200 kg Work areas Chuck diameter: 320 mm Turning length: 475 mm Swing over bed: 570 mm Swing over cross slide: 400 mm C-axis (optionally ex works) Angular accuracy: 51" Repeatability: 20" Motor torque X-axis: 11 Nm Z-axis: 11 Nm Speed range Speed range: 30 – 4000 rpm Rapid traverse speed X-axis: 24 m/min Z-axis: 30 m/min Electrical data Supply voltage: 400 V Line frequency: 50 Hz Electrical connection Total connected load: 40 kVA Accuracy Repeatability: ± 0.002 mm Positioning accuracy: ± 0.004 mm Chuck through-hole diameter: 51 mm Slant-bed angle: 45° Tailstock Taper: MK 5 Quill travel: 100 mm Quill diameter: 100 mm Quill actuation: hydraulic Spindle Spindle mount: DIN ISO 702-1 No. 6 Main spindle hydraulic chuck: 200 mm Spindle nose: A2-6 Main spindle bore: 65 mm Travel X-axis: 235 mm Z-axis: 530 mm Vertical spindle Drive motor power, continuous S1: 11 kW Drive motor power, S6-30% duty: 22 kW Drive motor torque: 70 Nm Drive motor torque, S6-30% duty: 140 Nm Feed force Feed force X-axis: 8.4 kN Feed force Z-axis: 5.6 kN Tool changer Type: Servo VDI 40 – DIN 5480 Number of tool positions: 12 Drive motor power: 4.82 kW Permissible maximum speed at tool coupling: 6000 rpm Maximum tool torque: 20 Nm

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2020, Funkcionalnost: popolnoma funkcionalen, CUT 2530S - Variabilný CNC stroj Hedowfdm Eopfx Ah Tjfn EPS rezací stroj so 4 nezávisle pohyblivými osami a variabilným pracovným stolom.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, The machine is currently on display. Optimill F 110 HSC Premium CNC Milling Machine, direct from the manufacturer. F 110 HSC – The OPTIMUM Premium CNC Milling Machine with Siemens SINUMERIK 828D Control stands out for its performance, speed, precision, and long service life. · Heavy-duty construction · High productivity · High reliability · Robust, torsion-resistant machine base with strong ribbing · Profile rail with recirculating ball bearings for high rapid traverse speeds in all axes · High-torque servo drives in all three axes · Telescopic way covers on all three axes · Automatic lubrication · Solid, precise milling table with three T-slots, generously dimensioned and precision ground · The portable electronic handwheel with enabling button and emergency stop pushbutton greatly facilitates program setup · Coolant system with chip flush and cleaning gun · Belt-type chip conveyor ensures efficient chip removal · Chip trolley · RJ45 interface and 230 V power connection · Enclosed electrical cabinet with integrated heat exchanger for optimal temperature control and prevention of dust ingress · Machine light in the working area · Additional SIEMENS warranty for material defects and free online/on-site service OSS Plus · 1-year basic maintenance contract included for Germany/Austria/Switzerland Spindle: Inline spindle Machine data Electrical connection: 400 V / ~50 Hz Total connected load: 15 kVA Milling spindle Drive motor S1 operation: 9 kW Torque, drive motor S1: 57 Nm Drive motor S6-30% operation: 21.2 kW Torque, drive motor S6-30%: 135 Nm Spindle taper: SK 40 / DIN 69871 Optional internal spindle cooling Drive motor S1 operation: 10.5 kW Torque, drive motor S1: 50 Nm Drive motor S6-30% operation: 26.4 kW Torque, drive motor S6-30%: 125 Nm Cooling lubricant system Coolant pump output (2 units): 900 W Max. flow rate: 35 l/min Tank capacity: 116 liters Cleaning pump Cleaning pump output: 530 W Milling accuracy Repeatability: ± 0.005 mm Positioning accuracy: ± 0.005 mm Tool changer Type: Double-arm gripper Number of tool stations: 20 Max. tool diameter: 78 mm Max. tool diameter (if adjacent stations are empty): 120 mm Tool length: 300 mm Max. tool weight: 8 kg Tool change time (tool to tool): 2.5 seconds Travel distances X-axis: 650 mm Y-axis: 400 mm Z-axis: 500 mm Feed drive Rapid traverse (X, Y, Z): 48 / 48 / 32 m/min Motor torque (X/Y/Z): 11 Nm / 11 Nm / 20 Nm Feed forces X/Y/Z: 3.67 kN / 3.67 kN / 6.68 kN Speed range Speeds*: 12,000 rpm Pneumatics Air pressure: 6 bar Air consumption per hour: 6–8 kg/m³ Hfodpeymka Hjfx Ah Ten Milling table Spindle-to-table distance: 100–600 mm Table (L x W): 850 x 400 mm T-slot size/quantity/spacing: 18 mm / 3 / 100 mm Max. table load: 400 kg Dimensions L x W x H: 2,100 x 2,300 x 2,750 mm Total weight: 4,300 kg

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, The machine is on display and has only been used for demonstration purposes. Optimill F50 E CNC milling machine – direct from the manufacturer. F50 E – The OPTIMUM CNC milling machine with Siemens SINUMERIK 808D Advanced control stands out for its performance, speed, precision, and long service life. • Machine in column design made of cast iron for high rigidity • Carousel-type tool changer with eight tool stations • All linear guides equipped with stainless steel covers • Automatic central lubrication • Siemens main spindle motor • Siemens servo drive in all axes (closed-loop system) • Maximum spindle speed of 10,000 rpm • Portable electronic handwheel with enabling switch and emergency stop button significantly facilitates program setup • Coolant system with a 70-liter coolant tank • Tool changes carried out automatically or by pressing a button (electropneumatic tool clamping system) • Heavy-duty, precision-milled worktable – large, dimensionally stable, and precision ground for high accuracy • Very generously sized access doors to minimize cleaning and maintenance time • LED machine lamp for complete illumination of the work area • SIEMENS add-on package: material defect liability and free on-site service OSS SINUMERIK 808D • Software package with identical control layout, ensuring process reliability • LED tool number display • MCP with rotary switch for feed and spindle override • Absolute encoder – no homing required • Higher accuracy Control • 8.4” LCD color display with 800 x 600 resolution SIEMENS OSS add-on package • 12 months; Item No. 3589010 • 36 months; Item No. 3589012 • Dimensions and weights Length approx. 2030 mm Width/depth approx. 1600 mm Height approx. 1980 mm Weight approx. 1900 kg Electrical specifications Connection voltage: 400 V Mains frequency: 50 Hz Electrical connection Total connected load: 10 kVA Milling table (horizontal) Length: 690 mm Width: 225 mm Distance vertical spindle–table min.: 90 mm Distance vertical spindle–table max.: 410 mm T-slot size: 14 mm Number of T-slots: 3 T-slot spacing: 63 mm Max. load capacity: 150 kg Accuracy Repeat accuracy: ± 0.015 mm Positioning accuracy: ± 0.015 mm Pneumatic connection Operating pressure: 6 bar Travel X-axis (automatic): 330 mm Y-axis (automatic): 220 mm Z-axis (automatic): 320 mm Distance spindle–column min.: 280 mm Distance spindle–column max.: 280 mm Vertical spindle Spindle taper: BT 30 Speed range: 10,000 rpm Drive motor power S1 (continuous): 3.7 kW Drive motor power S6-30%: 5.5 kW Drive motor torque S1 (continuous): 24 Nm Drive motor torque S6-30%: 36 Nm Feed rate X-axis: 15,000 mm/min Y-axis: 15,000 mm/min Z-axis: 15,000 mm/min Feed motor torque (continuous, S1) X-axis: 3.5 Nm Y-axis: 6 Nm Z-axis: 6 Nm Tool changer Design: carousel Number of tool stations: 8 Max. tool diameter: 100 mm Max. tool length: 200 mm Max. tool weight: 6 kg Hjdpfx Ahsymkdxj Tofn Tool-to-tool change time: 7 s

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2015, Proizvajalec: OPTIMUM Maschinen Germany GmbH Hfedpfx Asy Ia Uweh Ton Model: F 150 Tip stroja: 3-osni CNC obdelovalni center Serijska številka: 1521211505 Letnik: 2015 Krmilje: Siemens Sinumerik 828D Pomiki osi X/Y/Z: pribl. 750 / 500 / 500 mm Držalo orodja: BT40 Moč vretena: 12 kW Moč vretena S1: 9 kW Skupna moč: 25 kW Napajanje: 400 V / 50 Hz Delovna miza z T-utorji: pribl. 800 × 450 mm Oprema: Vgrajen menjalec orodja Vgrajen transportni trak za ostružke Teža stroja: pribl. 3520 kg

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2021, obratovalne ure: 400 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: skyCNC 6008, potovalna razdalja osi X: 900 mm, pomik osi Y: 6.100 mm, pomik po osi Z: 270 mm, hitrost pomika os X: 20 m/min, hitrost podajanja osi Y: 15 m/min, hitrost podajanja os Z: 8 m/min, dolžina obdelovanca (maks.): 6.000 mm, širina obdelovanca (maks.): 800 mm, premer obdelovanca (maks.): 270 mm, širina mize: 800 mm, obremenitev mize: 400 kg, skupna masa: 3.250 kg, hitrost vretena (min.): 15.000 obr/min, X 900 Y 6100 Z 270 mm 11kW (table 800) Available immediately! PFEIFER technology skyCNC Milling Machine 6008 – 11kW / 5 ATC (as new, from 2021, only 400 operating hours) CNC Milling Machine – High-precision and powerful milling and drilling with extremely high speed and quality For sale on behalf of a customer: An as-new 6-meter CNC milling machine with automatic tool changer. The system is immediately available and operational at the user’s facility; the sale is due to a switch to laser processing. The system can be inspected under power at the customer's/seller's site in 07819 Triptis. Key Features: Hfjdpfxowlqpyj Ah Ten - Working/travel area (LxWxH): 6100 mm x 900 mm x 270 mm (clearance under gantry 300 mm, max. tool length 300 mm) - Automatic 5-position tool changer, ISO40 tool holder (optional 10 tool positions available); incl. 5x ISO40-ER32-75 tool holders and 5x ER32 collets - HPM minimal-quantity lubrication/spray cooling for cooling workpiece and tool, automatically controlled via solenoid valve by M-code - T-slot table 6000 mm x 800 mm - Incl. 3 pneumatic quick-action vices HOMGE HBV-8-300; jaw width 200 mm, clamping force up to 8.0t – infinitely adjustable; high clamping accuracy; patented pneumatic system - Central lubrication access points - Automatic tool length measurement - Mobile MPG control unit for easy and quick operation, workpiece zero points freely selectable - Ethernet connection for network data transfer, USB port - File formats: G-code, DIN ISO data - Incl. industrial computer system with 17" TFT touchscreen, PC keyboard and mouse - HF milling spindle: HSD spindle ES951 A 1112 S / 11kW, air-cooled; spindle speed: 3,000 - 15,000 rpm - Power connection: 3-phase AC 400V / 50 Hz, max. power consumption: 15 kW - Dimensions (LxWxH): 6850 x 1440 x 2163 mm, weight: approx. 3,250 kg - Compressed air connection: min. 7 bar, air filter required Sale exclusively to commercial customers only! Support and service by PFEIFER technology & Innovation Plauen

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, Machine is located in the showroom. Optimill F 80 CNC milling machine, directly from the manufacturer. F 80 CNC – The OPTIMUM CNC milling machine with Siemens SINUMERIK 808D control stands out thanks to its performance, speed, precision, and long service life. • Column-type machine frame made from cast iron for high rigidity • Carousel tool changer with 12 tool stations • All linear guides equipped with stainless steel covers • Automatic central lubrication • Siemens main spindle motor • Siemens servo drives on all axes (closed-loop control) • Maximum spindle speed of 10,000 rpm • Portable electronic handwheel with enabling switch and emergency stop facilitates program setup • Coolant system with 70-litre coolant tank • Tool change can be performed automatically or at the push of a button (electropneumatic tool clamping) • Massive, precise milling table – large dimensions and precision-machined surface • Large access doors to minimize cleaning and maintenance time • LED machine light for full illumination of the work area SINUMERIK 808 ADVANCED Compact and robust Communicative • Front USB panel (IP65) • Serial interface RS232C • RJ45 Ethernet at the rear User-friendly • Technology-specific keyboard layout • Hard keys with protective membrane Hfodjymkcuepfx Ah Tjn Process-safe • LED tool number display • MCP with rotary switch for feed and spindle override Comprehensive package • RJ45 Ethernet port • Prepared for remote maintenance • AST function; enables easy optimization for higher dynamic and accuracy requirements • Absolute encoder / no homing sequence required • Higher accuracy Dimensions and weights Length approx. 1995 mm Width/depth approx. 1930 mm Height approx. 1640 mm Weight approx. 2300 kg Rapid traverse speed X axis 20 m/min Y axis 20 m/min Z axis 20 m/min Electrical data Connected voltage 400 V Line frequency 50 Hz Total power requirement 12 kVA Milling table (horizontal) Length 800 mm Width 260 mm Distance vertical spindle – table min. 100 mm Distance vertical spindle – table max. 550 mm T-slot size 16 mm Number of T-slots 5 T-slot spacing 50 mm Max. load capacity 200 kg Precision Repeatability ± 0.01 mm Positioning accuracy ± 0.01 mm Coolant system Coolant pump motor power 450 W Tank capacity 80 l Pneumatic connection Operating pressure 7 bar Traverse paths X axis (automatic) 450 mm Y axis (automatic) 260 mm Z axis (automatic) 450 mm Distance spindle – column max. 370 mm Vertical spindle Spindle taper BT 40 Speed range 50 – 10,000 rpm Note on speed range: Maximum continuous spindle speed must be reduced by about 20% for continuous operation Drive motor rated power (S1) 3.7 kW Drive motor power (S6-30% duty) 5.5 kW Drive motor torque (S1) 24 Nm Drive motor torque (S6-30% duty) 36 Nm Feed motor torque X axis (S1) 6 Nm Y axis (S1) 6 Nm Z axis (S1) 11 Nm Tool changer Type: Carousel Number of tool stations: 12 tools Max. tool diameter: 95 mm Max. tool length: 300 mm Max. tool weight: 8 kg Tool change time (chip-to-chip): 7 s

Leto izdelave: 2009, stanje: pripravljen za uporabo (rabljen), Na voljo je CNC ravnoležiščni stružnica Optimum. Premer obdelave nad ležiščem/vozičkom: 280 mm/170 mm, razdalja med konicama: 700 mm, vreteninska odprtina: 27 mm, hitrost vrtenja: 4000 obr/min, hod X/Z: 165 mm/660 mm, pomik X/Z: 2 m/min/3 m/min, število orodnih mest: 4, hod pinole: 85 mm. Dimenzije stroja X/Y/Z: pribl. 2000 mm/750 mm/1550 mm, teža: pribl. 450 kg, krmiljenje: Siemens Sinumerik. Dokumentacija je na voljo. Možen je ogled na lokaciji. Hedpfx Ahsyyplij Tsfn

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, Machine is on display. Optimill F 300 HSC Premium CNC milling machine direct from the manufacturer. F 300 HSC – The OPTIMUM premium CNC milling machine equipped with the Siemens SINUMERIK 828D control system stands out for its performance, speed, precision, and long service life. • Heavy-duty design • High productivity • High reliability • Strongly ribbed, torsion-resistant machine base • Profile rail guides with roller bearings in all axes for high load capacity • High-torque servo drives mounted directly to the ballscrews in all three axes • Precision-ground, preloaded, high-performance ballscrews for rapid traverse speeds in all axes • Telescopic guideway covers on all three axes • Main spindle SK40 with up to 15,000 rpm and inline spindle • Solid, precise milling table with five T-slots, generously dimensioned and precision-ground • Portable electronic handwheel with enabling button and emergency stop button greatly simplifies program setup • Tool changer with double gripper and 30-tool capacity • Coolant system with chip flushing and cleaning pistol • Through-spindle coolant supply at 20 bar • Belt-type chip conveyor for efficient chip removal • Chip trolley • Oil separator • Work area machine lamp • Additional Siemens package: material defect liability and free Online-/On-site-Service OSS Plus • 1-year Basic maintenance contract included in DE/AT/CH • Control system features • 15.6" color display • 16:9 format • Complete package • Safety Integrated • Remnant material detection and processing • ShopMill step programming • Network drive management • 3D simulation • Path tracing • Siemens OSS PLUS add-on package • 12 months; item no. 3589020 • 24 months; item no. 3589021 • 36 months; item no. 3589022 • Equipment details • Inline spindle • Taper SK 40 / DIN 69871 • Spindle speed 15,000 rpm • Dimensions and weights • Length approx. 2856 mm • Width/depth approx. 2300 mm • Height approx. 2850 mm • Weight approx. 6500 kg • Rapid traverse speed • X-axis 36 m/min • Y-axis 36 m/min • Z-axis 32 m/min • Electrical data • Connection voltage 400 V • Mains frequency 50 Hz • Electrical connection • Total connected load 30 kVA • Horizontal milling table • Length 1200 mm • Width 600 mm • T-slot size 18 mm • Number of T-slots 5 • T-slot spacing 100 mm • Max. load capacity 800 kg • Accuracy • Repeatability ± 0.005 mm • Positioning accuracy ± 0.005 mm • Travel • X-axis automatic 1000 mm • Y-axis automatic 620 mm • Z-axis automatic 630 mm • Vertical spindle • Spindle taper SK 40 DIN 69871 • Speed range 15,000 rpm • Drive motor power S1 continuous operation 20 kW • Drive motor power S6-30% operation 52.4 kW • Drive motor torque S1 continuous operation 96 Nm • Drive motor torque S6 30% operation 250 Nm • Feed force • Feed force X-axis 6.68 kN • Feed force Y-axis 6.68 kN • Feed force Z-axis 12.01 kN • Feed motor torque • X-axis continuous operation S1 20 Nm • Y-axis continuous operation S1 20 Nm • Z-axis continuous operation S1 36 Nm • Tool changer • Double arm gripper • Number of tool stations 30 Hedpfx Ajymd Epoh Tofn • Max. tool length 300 mm • Max. tool weight 8 kg • Tool-to-tool change time 2.5 s

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2018, Proizvajalec: Optimum Maschinen Germany GmbH Hedey Ia Uqopfx Ah Tofn Model: L34HS Serijska številka (SN): 11261804002 Tip stroja: CNC stružnica s plosko posteljo Leto izdelave: 2018 Moč motorja: 3,7 kW Napajanje: 400 V / 50 Hz Območje vrtljajev vretena: pribl. 30 – 3500 vrt/min Maksimalna hitrost vretena: 3500 vrt/min Maksimalni premer struženja: pribl. 350 mm Premer struženja nad suportom: pribl. 146 mm Razdalja med konicami: pribl. 600 mm Pomik osi X/Y/Z: pribl. 185 / 185 / 540 mm Kužel / vpenjanje: MK 3 Teža: pribl. 1200 kg

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2005, skupna dolžina: 10.000 mm, CNC 5000 control with 17-inch color TFT touchscreen. - Automatic cutting via rotary shear - Double set of hydraulic clamps for sheet metal holding (short and long) Upper beam with water bending groove, oil filling, fastening and leveling materials, safety stop rail along the full machine length, emergency stop integrated in foot pedal for the upper beam and folding beam, second foot pedal for two-person operation, upper beam safety device, and two short part holding fingers. Hodpfxjwnyu Ds Ah Tofn The machine is professionally repaired, overhauled, and cleaned by a specialist and is fully operational. A functional test will be performed. Sheet width: 10,000 mm Steel sheet thickness: 1.5 mm Aluminum sheet thickness: 2.5 mm Stainless steel sheet (VA) thickness: 1.5 mm Back gauge width: 150 - 1150 mm Color: light blue/light grey Total power required: 400 V Required space: 12,500 x (2,367 x 700) + fence 2,070 mm Insertion depth: 1,150 mm Machine weight: 18,500 kg Positioning speed: 250 mm/sec Number of uprights: 8 pcs Number of clamping jaws: 8 Bending angle: 145 degrees

Stanje: kot nova (razstavni stroj), Leto izdelave: 2026, The machine is on display and has only been used for demonstration purposes. Optiturn L44 CNC Premium CNC Lathe – direct from the manufacturer. L44 CNC – The OPTIMUM Premium CNC lathe equipped with Siemens SINUMERIK 828D control stands out for its power, speed, precision, and long service life. Dimensions and Weights Max. width/depth: 2300 mm Length approx.: 2530 mm Width/depth approx.: 1595 mm Height approx.: 1795 mm Weight approx.: 2600 kg Working Ranges Chuck diameter: 150 mm Chuck actuation: Hydraulic Center height: 223 mm Distance between centers: 850 mm Swing over bed: 446 mm Swing over gap: 520 mm Swing over cross slide: 240 mm Bed width: 300 mm Motor Torque X-axis: 6 Nm Z-axis: 8.5 Nm Speed Range Number of speed ranges: 1 Speed range: 10 – 3000 rpm Electrical Data Drive motor power: 7 kW Connection voltage: 400 V Mains frequency: 50 Hz Electrical Connection Total connected load: 23 kVA Accuracy Repeatability: ± 0.005 mm Hedpsymkwrjfx Ah Tefn Positioning accuracy: ± 0.005 mm Hydraulic System Motor power: 0.75 kW Tank capacity: 50 l Ball Screw X-axis diameter: 25 mm X-axis pitch P: 5 mm X-axis accuracy class: C3 Z-axis diameter: 40 mm Z-axis pitch P: 5 mm Z-axis accuracy class: C3 Coolant System Coolant pump power: 270 W Tank capacity: 90 l Machine Data Bar capacity diameter: 40 mm Motor(s) Drive motor torque: 33 Nm Tailstock Taper: MT 4 Quill stroke: 165 mm Quill diameter: 52 mm Spindle Spindle nose: DIN ISO 702-1 No. 5 Spindle bore/bar capacity diameter: 52 mm Control Type: Sinumerik 828D PPU 240 System software: SW 24 CNC memory: 3 MB Look Ahead: 50 Block change time: 3 ms Number of tool positions: 128 Travel X-axis: 250 mm Z-axis: 760 mm Vertical Spindle Continuous-duty drive motor power S1: 7 kW Drive motor power S6-30% duty: 16 kW Drive motor torque: 33 Nm Drive motor torque S6-30% duty: 80 Nm Feed Rate X-axis: 15,000 mm/min Z-axis: 15,000 mm/min Feed Force Feed force X-axis: 7.5 kN Feed force Z-axis: 5.3 kN Tool Changer Type: Hydraulic; VDI 30 Number of tool stations: 8 Max. tool holder height/width (square): 20 x 20 mm Max. boring bar holder diameter: 25 mm • SIEMENS spindle and servo motors • Fully enclosed with safety device • Standard with max. spindle speed up to 3000 rpm • Automatic central lubrication • Swivelling operator panel • Tailstock cover • Electronic handwheels for X and Z axes • Coolant system with 90-liter coolant tank • RJ45 interface, USB port, and 230 V power outlet • Electromagnetic compatibility (EMC) • Six leveling feet • Operator's tools SINUMERIK 828D Basic COMPLETE PACKAGE • Safety Integrated • Remnant detection and machining • ShopTurn step programming • Manage network drives • 3-D simulation • Graphic tracking Control • 10.4" color display • 4:3 format • User-friendly SINUMERIK Operate software • Front interfaces: USB 2.0, RJ45 Ethernet, Compact Flash (CF) card Guideways • Robust flat-bed guides Ball Screw • High rapid traverse speeds in all axes • Reduced wear • High positioning and repeat accuracy

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1994, TRAUB TNS 65 D / 5-osno CNC obdelovalni center TX8D -Nadzorni sistem TX 8D -CELOTNE TEHNIČNE PODATKE SI OGLEJTE NA FOTOGRAFIJAH -Letnik izdelave 1994 -Hidravlični sistem za nalaganje orodij -Podporni konični vrtalnik -Različni pogonski držala orodij -Trikolensko vpenjalno pripravo -Držalo orodij -Popolna dokumentacija Hfjdpfszpf I Asx Ah Ton Pridržana pravica do sprememb / napak pri vnosu.

Stanje: novo, Leto izdelave: 2023, CNC stružnica HS-440HL TEHNIČNI PODATKI: - krmilje FANUC 0i-TF Plus (5) - servo motor vretena: FANUC 11/15 kW - servo motorji po X-/Z-osi: FANUC 1.6 kW - maks. premer obdelovanca/struženja fi 450 mm / fi 300 mm - maks. dolžina struženja 450 mm - hod po X-/Z-osi: 165 mm / 500 mm - delovni hodi 5m/min; hitri hodi 30 m/min - hitrost vrtenja vretena 45-4500 obr./min - izvrtina skozi vreteno / premer palice: 62 mm / 52 mm - hidravlična stružna glava fi 200 mm - 12-mestni hidravlični revolver orodij - hidravlični konjiček MK4 / hod pinole konjička 130 mm - linearna kroglična vodila po vseh oseh - dimenzije stroja (š x g x v) 3950 x 1552 x 1825 - teža stroja 4500 kg STANDARDNA OPREMA - popolnoma zaščiteno delovno področje s kabino - 12-mestni hidravlični zalogovnik orodij - držala za izvrtine 4 kosi - držala za stružne nože 8 setov - vrtljiva konica MK4 - transporter ostružkov (tračni) z zabojnikom - avtomatski mazalni sistem - hladilni sistem z rezervoarjem in črpalkami - toplotni izmenjevalec elektro omarice - transformator - kaseta z orodjem za osnovno posluževanje s strojem - nivelirni vijaki in podloge (6 set-ov) Hfodpfxsiwtk No Ah Ton - signalna luč / delovna svetilka LED

Stanje: novo, Leto izdelave: 2026, Delovno območje: X – 2100 mm, Y – 3000 mm Prostor za premikanje po osi Z: 300 mm Tip delovne mize: Hibridna (vakuum + mehanske tirnice) Število vakuumskih segmentov: 6 Največja hitrost obdelave v načinu počasnega gibanja: do 40 m/min Največja hitrost obdelave: do 25 m/min Ločljivost programa: 0,01 mm Mehanska ločljivost: 0,04 mm 9-kW električni vreten, 24.000 vrt/min z ležaji iz polne keramike Vakuumska črpalka Becker VTLF 2.250 Pogon: AC servo pogoni Leadshine z močjo 1500 W in visokim zadrževalnim navorom (dvojni na osi Y) Prenos pogona: Visoko natančni planetni reduktorji NIDEC SHIMPO Pogonski sistem: 30-mm linearni vodila in drsniki PMI s spiralnimi vodilnimi letevami za največjo kontaktno površino Sistem za mazanje vodil: Avtomatski Hfedpfjzr D Nwox Ah Tsn Sistem za merjenje dolžine orodja: Avtomatski Krmilni sistem: NK-105 G3 Standardna programsko oprema CAD/CAM: Artcam Open 2016 Neobvezna programsko oprema CAD/CAM: Vectric Cut 2D PRO (funkcija dostopa do naklonov, samodejno ugnezdenje) – doplačilo 2.000 PLN neto Napajanje: 3 faze, 400 V, 50–60 Hz Ognjeporna kablovina, fleksibilna in zaščitena pred deformacijami Dimenzije stroja: 4835 x 2900 x 2205 mm