Omec 450 nakup rabljenega (5.411)

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Ročna rezkalna stroj za spoje predalnikov OMEC 450 – po tehničnem pregledu, pripravljena na uporabo Specifikacija: Gbsdpfx Aoy R Ewpohmjn • stanje – rabljeno, po celovitem pregledu • proizvajalec – OMEC • skupna moč – 1,1 kW • največja širina rezkanja – cca 35 cm • ročno vodenje glav • pnevmatske vpenjalke – 4 kosi • mere – 90 x 60 x 128 cm (š x d x v) Dodatne informacije: • stroj je v dobrem tehničnem stanju, pripravljen za takojšnjo uporabo • priložene fotografije prikazujejo dejansko stanje prodajanega predmeta • možnost ogleda in preizkusa naprave na mestu • brezplačno usposabljanje za upravljanje stroja (v prostorih podjetja) • cena v oglasu ne vključuje DDV in stroškov prevoza Financiranje in transport: • organiziramo prevoz s floto MDD, kurirskimi podjetji ali zunanjimi prevozniki • omogočamo finančno podporo v obliki lizinga ali lizinške posojila

Stanje: novo, Funkcionalnost: omejena funkcionalnost, Leto izdelave: 2025, vrsta upravljanja: ročni, Oprema: CE označba, dokumentacija / priročnik, OMEC 4-Roller Mechanical Symmetrical Plate Rolling Machine with Double Pinch 1530×2.5 mm Brand New “CE” Certified. Made in Italy. Double Pinch Design. Powered Upper and Lower Rollers with Equal Drive. Motorized Side Rollers for Vertical Adjustment. Front Opening for Upper Roller. Special Bearings for Side Rollers. External Lever for Roller Tilt Adjustment. Sheet Clamping System with Bearing Device. 2-Pedal Foot Switch. Electrical Panel Compliant with “CE” Standards. Gbjdpfx Ahey E Schomsn Millimeter Scale Indicator for Sheet Clamping Position. Standard equipment included with the rolling machine: - Conical device on the upper roller (frontal). - No. 2 digital position displays for the side rollers. - No. 1 display for motorized sheet clamping. - Grinding/turning of rollers after hardening process. - Roller hardening. - Lateral sheet loading table + sheet centering guides with millimeter references. Working width: 1530 mm. Upper and lower roller diameter: 90 mm. Side roller diameter: 95 mm. Sheet thickness: 1.5 – 2 – 2.5 mm (1.5 x D, 3 x D, 5 x D). Roller hardening: HRC 55/60, depth 2 mm. Installed power: 1.8 kW. Dimensions: 2290 x 750 x 1150 mm. Weight: 690 kg.

Stanje: novo, OMEC 3-roll Mechanical Symmetrical Plate Rolling Machine with Double Pre-bending Brand New “CE” Made in Italy WORKING WIDTH: 2050 mm UPPER ROLL DIAMETER: 150 mm LOWER ROLL DIAMETER: 150 mm SIDE ROLL DIAMETER: 150 mm MAXIMUM BENDING THICKNESS 1.5 x D: 4 mm MAXIMUM BENDING THICKNESS 3 x D: 4.5 mm MAXIMUM BENDING THICKNESS 5 x D: 5 mm MACHINE DIMENSIONS: 920 x 3400 x 1100 mm TOTAL INSTALLED POWER: 6.5 kW WEIGHT: 1700 kg The FX3-3 series stands out among mechanical asymmetric 3-ROLL plate rolling machines with simple FULL FEEDING SYSTEM. The side roll (bending roll) comes standard with steel supports, bearings, and external bronze pads ensuring maximum reliability and minimal friction over time. The roll rotation is applied to the UPPER and LOWER rolls via a gear reducer and self-braking motor. Sheet metal feeding and clamping use top-quality motors and reducers. Equipped with hardened rolls, motorized movement and clamping, preparation for profile bending rolls, and a conical forming device directly on the upper roll, these machines offer an outstanding balance between absolute quality and operator-friendly use for a variety of cylindrical and conical bending applications. The top roll opens laterally for easy removal of the rolled shell as standard. MACHINE CONFIGURATION: - MOTORIZED UPPER and LOWER ROLLS with equal power for rotation - MOTORIZED SIDE ROLL for up/down movement - MOTORIZED SHEET CLAMPING - DIGITAL POSITION INDICATOR for side roll position Gbedpfegyk S Ajx Ahmen - DIGITAL INDICATOR for sheet clamping position - ROLL HARDENING HRC 55/60, 2mm depth - Side roll supports: steel + shielded bearings + external bronze pads - PRE-ARRANGEMENT FOR SIDE ROLL INCLINATION to form cones (conical device excluded) - EXTERNAL SIDE ROLL INCLINATION LEVER (right) for FX3.2/FX3.3 – (right & left) for FX4.1/FX4.2 - PRE-ARRANGEMENT FOR PROFILE BENDING ROLLS - 2-PEDAL FOOT SWITCH + side roll up/down control and sheet clamping + emergency stop mushroom - ELECTRONIC PHASE CONTROL for power supply - ELECTRICAL PANEL COMPLIANT WITH CE STANDARDS SUPPLIED WITH THE MACHINE: - Front conical device on the upper roll - Digital indicator for side roll position - Digital indicator for sheet clamping position

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2025, OMEC 4-Roller Mechanical Plate Rolling Machine. Available for immediate delivery unless previously sold. Model: FX4.90.1330. Dual Pre-Bending. Working width: 1330 mm. Top and bottom roller diameter: 90 mm. Side roller diameter: 95 mm. Max plate thickness: 2, 2.5, 3 mm. (1.5 x D, 3 x D, 5 x D) Top and bottom rollers powered with equal output. Gjdjfh Skpepfx Ahmobn Motorized side rollers for up/down movement. Front opening top roller. Roller hardening HRC 55/60, hardness depth: 2 mm. Special bearings for side rollers. External lever for roller tilt adjustment. Sheet clamping with bearing-supported device. 2-pedal foot control. Electrical panel compliant with “CE” standards. Millimeter indicator for sheet clamping position. 4-ROLLER MECHANICAL PLATE ROLL with complete dual pre-bending and front release system. The top roller is fixed, while the upward and downward movements are assigned to the side rollers and the bottom roller. Sheet clamping is exceptionally straightforward: after the sheet is placed between the top and bottom rollers, raising the bottom roller securely clamps the sheet. Power: 1.8 kW Dimensions (mm): 800 x 2100 x H 1300 Weight: 625 kg Machine is supplied complete with: - Conical bending device on the top roller. - 2 digital readouts for side roller positioning. - Roller grinding/turning after hardening treatment. - Hardened rollers.

Stanje: novo, The manual milling machine Omec 650-M is suitable for the production of dovetails on drawers and all types of furniture parts. The machine is equipped with a spindle unit with a milling cutter, allowing the machining of dovetails with different heights. The machine can produce four types of dovetail joints with various pitches. Clamping and releasing of workpieces is carried out manually via eccentric shafts. Operation (On/Off) is performed via an overload relay on the motor terminal board and handwheels with levers mounted on the sides of the machine. The machine is built in accordance with CE standards. Technical data: Connection power: 0.75 kW, 400 V, 50 Hz Number of spindles: 1 Spindle speed: 16,500 rpm Standard dovetail pitch spacing: 25 / 40 / 50 / 60 mm Machine weight: 100 kg Space requirement (L x W x H): 450 x 540 x 1420 mm Workpiece dimensions: Workpiece length: 200 – 1500 mm Workpiece width: 60 – 280 mm Dovetail height: 5 – 18 mm Workpiece thickness: 7 – 45 mm Godpfx Aodcdwbehmobn The machine comes as standard with the following parts: - Eccentric HSS milling cutter mounted on the machine - Set of tools for machine adjustment and maintenance - Operating manual.

Stanje: dober (rabljeno), Koda: 0125 Blagovna znamka: OMEC - ITALIJA Model: F8 - CE standard Gbodpfx Aewl Iv Rohmjn Avtomatski utorni stroj za izdelavo lastovičjih spojev na predalnikih in različnih pohištvenih elementih - v skladu s CE standardom Stroj je opremljen z enoto z 8 vreteni z enako profiliranimi rezkarji, ki omogočajo izdelavo utorov različnih višin. Tehnični podatki: Število vreten: 8 Vrtljaji vreten/min: 17.000 Največja delovna širina: 400 mm Razdalja med središči utorov: 25 mm Izdelava predalov: 120 kosov/uro Moč: 7,5 kW Delovni tlak: 6 atm Skupne mere: 1500 x 1000 x 1200 mm (v) Teža: 1.100 kg

Stanje: dober (rabljeno), Koda: 0106 Znamka: OMEC - ITALIJA Model: 650-M Rezilni stroj za lastovičje spoje Tehnične lastnosti: Vgrajena moč na stroju: 0,75 kW Gbsdpfx Ahjyg N Hlsmen Maksimalna delovna širina: 420 mm Razdalja med sredinami utorov: 25-40-50-80 mm Skupne dimenzije: 800 x 720 x 1320 mm (V x Š x G) Teža: 130 kg

Stanje: dober (rabljeno), Koda: 0324 Znamka: OMEC Model: 750 Avtomatski rezkalni stroj za lastovičje spoje na predalih in različnih pohištvenih delih Tehnični podatki: Uporabna delovna širina: 480 mm Debelina sprednjih delov predalov: 60 mm Število spojev na minuto: pri 1. hitrosti 25, pri 2. hitrosti 35 Moč elektromotorja vretena nosilca orodja: 1,5 Hp Gedpfsytr Sdox Ahmsbn Moč elektromotorja za premik: 1,5 Hp Skupne mere: 800 x 1300 x 1200 mm (višina) Teža: 350 kg

Stanje: zelo dobro (rabljeno), OMEC TA185 Crosscut Saw Maximum cutting height: 180 mm Maximum cutting width: 900 mm Saw blade diameter: 550 mm Pneumatic material clamp Pneumatic saw feed Two-button saw operation Main motor power: 7.5 kW 2x roller tables, each 160 cm long CE certificate Technical documentation Gsdpfxjrk Nxge Ahmebn

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, Prečna žaga OMEC TA185 Največja višina reza 180 mm Največja širina reza 900 mm Premer žaginega lista 550 mm Pnevmatski pritisni mehanizem materiala Pnevmatski pomik žage Gsdpfxjy Sff Ns Ahmjbn Upravljanje žage z dvema gumboma Glavni motor 7,5 kW Dimenzije stroja 492x145x120 cm (V) Teža 600 kg

Stanje: novo, Leto izdelave: 2022, approx. 100.16 running meters, H: 450 cm, shelf load: 3,000 kg, pallet racking, heavy-duty racking, high-bay racking, industrial shelving, racks available immediately from stock Details: - Height: approx. 450 cm - Depth: approx. 110 cm - Length: approx. 100.16 running meters - Load capacity: 3,000 kg per shelf level - Upright frames galvanized - Beams: 270 x 14 x 5 cm, T30 - Beams in orange - New BLT / PR45 - Manufactured in Europe and tested according to the current DIN EN 15512 standard - 100% quality at the best price Rack configuration: - 37 x Upright frames approx. 450 x 110 cm, disassembled - 144 x Beams approx. 270 x 14 x 5 cm, T30 - 288 x Locking pins - Levels: floor + 2 - 324 pallet spaces including floor level — IMMEDIATELY AVAILABLE IN MULTIPLE QUANTITIES — Price: €10,900 net plus legally applicable VAT You will receive an invoice with VAT shown separately Frame pre-assembly can be carried out by us for a small additional charge of €12.50/net per piece Transport: Delivery available on request via our partner freight forwarder – costs depend on postal code Assembly: Gsdpfx Aszbkztshmsbn Our qualified personnel are available to assist you with the professional installation and dismantling of your warehouse equipment Our recommendation: Let us know your requirements… We are happy to support you in realizing your projects, from planning and ordering to installation.

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, Stroj za lastovičji rep OMEC 750 za lastovičje spoje na predalih in različnih kosih pohištva Primeri obdelave. Rabljeni stroj Gbedogzrlpspfx Ahmsn Delovno stanje: dobro Stroj za lastovičji rep z orodji: DA Napetost: 380/50

Stanje: zelo dobro (rabljeno), Faceplate Diameter: 450 mm Height: 110 mm Jaw height: 55 mm Long taper mounting: - Large diameter: 100.5 mm - Small diameter: 85 mm Gbedefhvkvjpfx Ahmen - Taper length: 73 mm External thread for locknut: Thread 130 x 4 Keyway: 16 mm

Stanje: delavnici obnovljeno (rabljeno), VK 450 Odkorňovačka byla kompletně repasována. Godpeq Hr N Ijfx Ahmjbn

Stanje: zelo dobro (rabljeno), Bottene pila wahadłowa Moc silnika: 3,7 kW, 380 V, 50 Hz Maksymalna średnica tarczy: 500 mm Wysokość cięcia: ok. 120 mm Maksymalny wysięg: 500 mm Ze stołem rolkowym i prowadnicą wzdłużną po lewej stronie, 3000 mm Ze stołem rolkowym po prawej stronie, 1000 mm Średnica króćca odciągu: 120 mm Wymiary (dł. x szer. x wys.): ok. 4200 x 1150 x 1650 mm Waga: ok. 200 kg Piła odchylana w prawo Piła i stół rolkowy przejezdne W komplecie tarcza tnąca Informacje dotyczące maszyn używanych: • Zastrzegamy pomyłki w danych technicznych oraz sprzedaż międzyczasową. • Podane ceny dotyczą odbioru z lokalizacji – załadunek w cenie! • Maszyna została wyczyszczona i sprawdzona pod kątem działania. • Wszystkie maszyny sprzedawane są w stanie jak widać, bez jakiejkolwiek gwarancji. Oględziny na miejscu możliwe dla kupującego. • Szczególne ustalenia wyłącznie w formie pisemnej. (Odpowiadamy tylko na zapytania zawierające adres i numer telefonu!) Gsdpfxeydnitj Ahmobn

Stanje: rabljeno, prevoženi kilometri: 929.764 km, moč: 331 kW (450,03 KM), prva registracija: 11/2020, vrsta goriva: dizel, lastna masa: 10.500 kg, največja dovoljena obremenitev: 15.500 kg, skupna masa: 26.000 kg, velikost pnevmatike: 315/80 R22,5, konfiguracija osi: 6x2, medosna razdalja: 4.750 mm, barva: oranžna, voznikova kabina: drugo, vrsta prenosa: samodejen, emisijski razred: Euro 6, vzmetenje: zrak, število sedežev: 2, Oprema: ABS, dvižna zadnja plošča, klimatska naprava, nadzor oprijema, nizka raven hrupa, parkirni grelec, računalnik na krovu, spojka prikolice, tempomat, zapora diferenciala, Colour: Orange, unladen weight: 10,500 kg, gross vehicle weight: 26,000 kg, 1st axle: 315/80 R22.5, 2nd axle: 315/80 R22.5, air suspension, tail lift, lifting axle, retarder, digital tachograph, electronic braking system (EBS), brake assist, electronic stability program (ESP), traction control (ASR), automatic climate control, adaptive cruise control (ACC), heated seats, H7 headlights, automatic driving lights, headlight range adjustment, radio, multi-function display, Bluetooth hands-free, rain sensor, power steering, adjustable steering column, roof hatch, sliding roof, external temperature display, roof spoiler, fog lights, electrically adjustable and heated exterior mirrors, electrically operated kerb mirror, wide-angle mirror, immobilizer, central locking, wind deflector, sun visor, winter tyres, cool box, axle load indicator, work lights, hill-start assist, LED daytime running lights, 1x 15-pin power socket, safety package, telematics system, collision warning, mirror package, speed limiter, touchscreen controls, wide-base tyres, traffic jam assist, Scania G450B6X24NB with lifting and steering axle, automatic climate control, retarder, auxiliary heating, ACC adaptive cruise control, wheelbase 4550 mm, LED headlights, full air suspension, CG 17 driver’s cab with 1 bed, ACC adaptive cruise control, reversing camera, Carrier Supra 900 U cooling unit (diesel, electricity, 2,157 operating hours), W+R contract vehicle with service booklet, 1st owner, Bär 2.5 t tail lift, non-binding offer, errors and prior sale excepted. Image may not match actual offer. Godpfx Ajzczz Tohmebn

Stanje: nepreverjeno (rabljeno), Leto izdelave: 1978, Funkcionalnost: nepreverjeno, X-travel: 300 mm, Y-travel: 150 mm, Gsdpswrp Eyefx Ahmsbn Z-travel: 200 mm, Table dimensions: 350 × 450 mm, Weight: approx. 1.4 t, Machine condition unknown,

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2006, Funkcionalnost: popolnoma funkcionalen, največja širina rezanja: 450 mm, delovna dolžina: 16.000 mm, delovna širina: 450 mm, Oprema: varnostna svetlobna zapora, For sale is a well-maintained Hundegger K2 joinery line with planing machine. The system is fully functional and has been serviced several times a year by Hundegger. The machine will remain in operation until early November and can then be dismantled by the buyer. = Equipment: = Machine type K2-5-450 - Maximum wood length intake and outfeed: 16 m - Colour: RAL 5012 blue - Infeed cross conveyor: 6 strands, horizontal, 2.2 m, with flat link chains - Extendable timber unloading platform - Underslung swivel cross-cut saw - 5-axis universal milling unit UFS (roller cutter, finger cutter, dovetail cutter) - Combination support for vertically-operating tools (finger cutter, drill unit 2.2 kW) - Combination support for horizontally-operating tools (drill unit 2.2 kW, drill unit 2.2 kW) - Front marking unit Gbedpfxszb I Iwe Ahmsn - 6-arm discharge table - Hydraulic beam turning station - Refined timber contact surfaces (the susceptible plastic coating replaced by maintenance-free stainless steel, chrome-plated tables, stainless steel rollers) - 10 m extension roller conveyor with feed roller - Outfeed cross conveyor: 7 strands, 3.5 m, with flat link chain - Planing machine interface: HMD = Planing machine - HM-D - Fully automatic four-sided planing and chamfering - Planing motors 7 kW - Automatic thickness planing adjustment - Direct planing control - Planer directly integrated downstream of the joinery machine = Miscellaneous - Viewing possible at any time by appointment. - If in operation, an inspection during production is possible. - A new K2 with planing machine and comparable equipment costs around €800,000. - New spare parts in stock can be included at a favourable price. - Machine runs perfectly, however, no warranty or liability will be assumed for future damages. - Ideal machine for medium to large-sized timber construction businesses or sawmills. = Contact - Friedrich Hirsch GmbH - Schwaig 2, 3351 Weistrach, Lower Austria - Managing Director and Owner: Friedrich Hirsch - For questions, please call Monday to Friday from 7:00 to 12:00 and from 13:00 to 17:00, or by email anytime. - Unfortunately, I could not provide a mobile number, otherwise the ad would be blocked.

Stanje: novo, Saw blade tiltable 0 - 45° Gbsdpfx Ahjxmk A Tsmen Carriage length 3,200/3,350 mm Cutting width 1,100 mm Motor power 5.5 kW Cutting height 155 mm Cutting height at 45°: 110 mm Saw blade diameter 450 mm Speed 3,000/3,600/4,200 rpm Extraction port diameter 1x120, 1x80 mm HoKuTech panel saw P 450 AX ----- 3-axis control for blade height, tilt, and motorized parallel fence Manufacturer's specifications: - Programmable saw blade height adjustment - Programmable saw blade tilt adjustment - Programmable parallel fence adjustment - Motors: main saw: 5.5 kW / 7.5 HP - Scoring unit with motor General features P 450: • Sliding table made from anodized aluminum, including high-precision guide made from hardened and ground steel • Sliding table lockable in any position • Saw blade guard with swing-away device • Extension arm with adjustable miter fence and longitudinal compensation • Belt shifting for speed change from above • Display for preset saw blade speed Technical data: • Crosscutting length: 3,350 mm • Max. cutting height at 90°/45°: 155 mm/110 mm • Cutting width with parallel fence: 1,100 mm • Motor power (400 V): 5.5 kW / 7.5 HP • Main saw blade speed: 3,000/3,600/4,200 rpm • Scoring saw blade speed: 7,600 rpm • Max. diameter main saw blade: 450 mm • Max. diameter scoring saw blade: 120 mm • Saw blade tilt: 0° to 45° • Extraction port diameter: 1 x 80 / 1 x 120 mm • Carriage length: 3,200 mm • Weight: 1,000 kg ----- Price for the above-mentioned machine upon request! ----- Prices plus packaging and shipping Prices plus statutory VAT ----- (Technical specifications according to manufacturer—no liability assumed!)

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, prevoženi kilometri: 136.500 km, prva registracija: 11/2019, IVECO TRAKKER 450 z mešalcem za beton CIFA Gbjdpfezcy E Dsx Ahmen Prva registracija 12.11.2019 - Euro 6 136.500 km 4 osi Oprema CIFA RY1300 - izhodna gred (PTO) Gume 70/80 % Veljaven tehnični pregled Dobro stanje Takoj na voljo OCENJUJEMO MENJAVE VOZIL VSEH ZNAMK, MAN, MERCEDES, DAF, RENAULT, VOLVO, SCANIA, Z OPREMO CIFA, SERMAC, PUTZMEISTER; ALI GRADBENO MEHANIZACIJO CATERPILLAR, FIAT HITACHI, KOMATSU

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, prevoženi kilometri: 185.000 km, prva registracija: 06/2008, vrsta goriva: dizel, gorivo: dizel, zavore: zaviranje z motorjem, barva: bela, število prestav: 16, emisijski razred: Euro 5, Leto izdelave: 2008, Oprema: ABS, EBS (Elektronski zavorni sistem), Tahograf, airbag, klimatska naprava, meglenke, Tovornjak Iveco Trakker 450 Zadnja prekucna kesona Leto 06/2008 Delovno vozilo 4 osi 8x4 Gedpfx Ahjzc Riaomsbn Ročni menjalnik ZF 16 prestav Dizel Euro 5 332 kW (451 KM) Mehansko vzmetenje z listnatimi vzmetmi Motorska zavora Klimatska naprava ABS Električna ogledala in stekla Senčnik Radio 185.000 km ODLIČNO STANJE!!!

Stanje: rabljeno, Keba analog module AM 450/A Kemro K2-400 – suitable for Engel CC200 control - Removed from a running machine - Fully functional Gedpfx Aew Ah N Sjhmebn Manufacturer: Keba Type: AM 450/A Kemro K2-400 Manufacturer no.: 054202

Stanje: rabljeno, Keba temperature card TM 450/A Kemro K2-400 – suitable for Engel CC200 control unit - removed from an operational machine Gsdpfx Ahew Ah Nfemsbn - fully functional Manufacturer: Keba Type: TM 450/A Kemro K2-400 Manufacturer number: 054492

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2019, obratovalne ure: 100 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: F9B192402, dolžina podajanja os X: 450 mm, dolžina pomika po osi Y: 350 mm, dolžina podajanja os Z: 400 mm, največja hitrost vretena: 5.000 obr/min, hod vretena: 80 mm, hitro pomikanje X-os: 5 m/min, hitri pomik os Y: 5 m/min, hitri pomik na osi Z: 5 m/min, skupna višina: 1.990 mm, skupna širina: 2.030 mm, skupna dolžina: 1.980 mm, širina mize: 270 mm, dolžina mize: 400 mm, vrsta vhodnega toka: trifazni, največja hitrost vrtenja: 5.000 obr/min, vrtljajska hitrost (min.): 10 obr/min, obremenitev mize: 450 kg, skupna masa: 2.270 kg, vhodna napetost: 400 V, teža obdelovanca (maks.): 450 kg, vhodni tok: 16 A, vhodna frekvenca: 50 Hz, Oprema: CE označba, dokumentacija / priročnik, vrtilna hitrost brezstopenjsko nastavljiva, EMCOMAT FB-450 MC with Sinumerik 828D Path Control with “Manual Machine” Godpfxjxapdcs Ahmsbn Universal tool milling and drilling machine equipped with Sinumerik 828D path control and hydraulic tool clamping Working area X450/Y350/Z400mm Drive power 7/10 kW Speed range from 10–5000 rpm Feed rate from 10–5000 mm/min Rapid traverse up to 5000 mm/min Machinist’s precision as per DIN 8615 Tool holder: DIN 69871 SK40 Includes: • Linear guides • Ball screw spindles • Vertical milling head, swivels +/-90°, with 80mm quill travel • Swivel-out device for vertical head • Hydraulic tool clamping • Coolant system • LED machine lamp • Fixed angle table 800x400mm • Work area guard incl. chip tray • Automatic central lubrication • Operating tools • Documentation • Machining with open door (Operating Mode 3) • Controlled and manual operation modes combined in one machine • Sinumerik 828D path control incl. control package for 3 axes with ball screws and servo motors, Process cycles with graphical user support: Drilling cycles for drilling, deep drilling, reaming, tapping (with length compensation) on bolt circles and linear hole patterns, rectangular and circular pockets, slot milling cycle, facing cycles, etc., USB interface

Leto izdelave: 1988, stanje: zelo dobro (rabljeno), številka stroja/vozila: 3284, • Protective screens around the machine. (min.) Material thickness: 0.65 mm (max.) Material thickness: 2 mm Technical specifications: Maximum/minimum film width: 450/350 mm Maximum forming area: 430 x 160 mm Maximum draw depth negative/positive: 6/20 mm (22 mm negative upon request) Maximum top heating: 10.15 kW Motor drives: 3.0 kW Total connected load at 100% duty cycle: 12.7 kW Operating air pressure: 6 bar Maximum air consumption (depending on production): 1250 l/min Gsdpshbu E Hjfx Ahmsbn Maximum water throughput: 1.0 m³/h COMPACT AND ROBUST – designed for high continuous output with easy operation. Ergonomic design (e.g. removal height 1300 mm). QUICKLY CONVERTIBLE – from 30° to 90° film feed, allowing for maximum material utilization for both rectangular and round lids (easy heater change). PRECISION – The precise forming table guidance via guide columns with ball bushings. The safe, reliable guarantee of precision. OPTIMAL CUTTING ACCURACY AT HIGH ENDURANCE LEVELS Cam-controlled functional sequence guarantees the highest repeat accuracy.