Okuma Komponenta nakup rabljenega (3.100)

Stanje: dober (rabljeno), Leto izdelave: 2010, Funkcionalnost: popolnoma funkcionalen, stružna dolžina: 1.000 mm, premer struženja: 630 mm, največja hitrost vretena: 3.800 obr/min, potovalna razdalja osi X: 580 mm, pomik osi Y: 160 mm, pomik po osi Z: 935 mm, največja hitrost vrtenja: 10.000 obr/min, Oprema: vrtilna hitrost brezstopenjsko nastavljiva, Technical Data Okuma Multus B300-W with Y-axis and Bar Loader Year of Manufacture: 2010 Machine Configuration: - Control: Okuma OSP200A (including simultaneous use of Hi-Cut PRO and CAS) - Tool Spindle: 10,000 rpm with HSK-A63 - Air blast through spindle center - Tool Magazine: 60 positions - Workpiece catcher - Renishaw 3D probe RMP60 incl. preparation for in-process measurement - Chip conveyor: Hinged belt, Interlit - High-pressure pump: Brinkmann TM26/180 - Prepared for oil mist extraction - Short bar loader: SAMSYS Multi-3000LR 1240/65 Main Spindle: - BigBore with spindle nose A8 – Speed: 38–3,800 rpm - Extension kit A8 for through-hole clamping; max. bar diameter 65 mm Ksdpfeyiayxsx Al Nolr - SMW collet chuck, axial pull – Hainbuch Spanntop system Sub-Spindle: - Max. speed: 5,000 rpm with spindle nose A6 - Extension kit A6 for through-hole clamping - Workpiece ejector for sub-spindle, diameter 52 mm Working Area: - Swing diameter up to max. 630 mm - Swing diameter over cross slide/bed: 630 mm - X-axis travel: 580 mm – rapid traverse 40 m/min - Z-axis travel: 935 mm – rapid traverse 40 m/min - Y-axis travel: 160 mm (+80/-80) – rapid traverse 26 m/min - W-axis travel: 1,000 mm – rapid traverse 20 m/min - B-axis is incremental at 0.001 degrees Weight: Approx. 10,300 kg

Stanje: rabljeno, Leto izdelave: 2022, številka stroja/vozila: L2E0253, CNC stružnica Klodpfx Ajy Axr Rsl Njr

Stanje: rabljeno, Leto izdelave: 2019, številka stroja/vozila: 0711-101349, Oprema: transportni trak za ostružke, Vertikalni obdelovalni center CNC Kljdpfjy Axf Dox Al Nor

Stanje: dober (rabljeno), Leto izdelave: 2011, Funkcionalnost: popolnoma funkcionalen, Opis: Stroj je v dobrem tehničnem stanju, po predhodnem dogovoru je možen preizkus. Krmilni sistem: OKUMA OSP-P200MA. Priključna moč: 58 kVA. Pomik v osi X: 1000 mm. Pomik v osi Y: 900 mm. Pomik v osi Z: 1000 mm. Opis: 4 osi. Teža: 26 t. Zasedena površina: 3,3 x 6,5 m. Kapaciteta zalogovnika orodij: 100. Sistem vpenjanja orodij: BT50. Parametri stroja: Klsdpfxsy Ehaij Al Nsr Pomiki v oseh X, Y, Z: 1000 x 900 x 1000 mm.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2013, This Okuma MCR-A5C30x65 portal milling machine was manufactured in 2013. It features a robust 100 mm spindle with a speed of up to 4000 rpm and can accommodate a maximum workpiece size of 2540 mm x 5540 mm. On its large 2500 × 6300 mm table, the machine supports an impressive 30,000 kg. Ideal for heavy-duty milling operations with rapid traverse speeds of up to 20,000 mm/min. Contact us for further information about this machine. Machine Advantages Technical Machine Advantages • Machine dimensions (L×W×H): 2500 mm x 6600 mm x 6350 mm // Weight: 59,000 kg • Maximum workpiece width: 2540 mm // Maximum workpiece length: 5540 mm • Table size (width × length): 2500 mm × 6300 mm // Max. table load: 30,000 kg // Table height from floor: 850 mm // Effective width between columns: 3050 mm // T-slot (width × number): 24H7 × 13 • Cutting feed rate: 1 to 10,000 mm/min // Rapid traverse: 20,000 mm/min // Table movement X-axis: 6500 mm // X-axis travel: 6500 mm // Y-axis travel: 3500 mm // Z-axis travel: 650 mm • Tool holder: Type BT50 + MAS // Tool magazine capacity: 50 tools // Max. tool length: 300 mm • Power supply: 400V, 3-phase, 50Hz // Rated power: 513 kVA // Full load current: 741 A // Peak current: 117/138 A // Short circuit current: 18 kA • Spindle diameter: 100 mm // Spindle speed: 30 to 4000 rpm Klodpfjx D S Ekox Al Njr • Large table, suitable for heavy loads / Large tool magazine capacity / High rapid traverse for efficient operations.

Stanje: dober (rabljeno), Leto izdelave: 2014, Funkcionalnost: popolnoma funkcionalen, CNC lathe with driven tools, part ejection blade, tool alignment eye for automatic tool setting, chip conveyor, and material feeder. Control system: OSP-P300L CNC with 15” color touchscreen Machine hours Power-on time: 65,458 h (as of 18.03.2026) NC operation time: 36,054 h Spindle rotation time: 19,533 h Cutting time: 16,582 h Power consumption: 33.1 kVA Maximum swing diameter: 480 mm Maximum machining diameter: 340 mm Maximum turning length: 785 mm Clamping: Collet + 10” hydraulic chuck B210-A06-01, 3x soft jaws (Schunk KM-WBL 103), 1x hard jaws (Schunk SHB-J 100), hydraulic through cylinder SS 1770, draw tube Main spindle: Spindle nose JIS A2-6, bore dia. 80 mm, integrated motor Speed range: 45 - 5,000 rpm Power/continuous duty: 22 kW / 15 kW Continuously controlled C-axis, 360° with 0.001° increment Sub spindle Speed range: 50 – 6,000 rpm Power/continuous duty: 11 kW / 7.5 kW Spindle nose dia. 140 mm, bore dia. 62 mm, integrated motor Continuously controlled C-axis, 360° with 0.001° increment Collet + 6” hydraulic chuck B206-01, 3x set soft jaws (Schunk KM-WBL 62) Hydraulic through cylinder SS1243, draw tube Sub spindle traverse (NC axis W, stroke for W450): 595 mm Spring-loaded part ejector on sub spindle W axis overload monitoring (drive torque) Tailstock clamping (tailstock) in sub spindle Turret Number of tool stations: 12, static and live tools BMT60 (not VDI) Tool holder in: 25 x 25 mm Tool holder out: dia. 40 mm Driven tools Drive output: 7.1/4.1 kW Speed range: 45 – 6,000 rpm Rapid traverse Rapid traverse X and Z axes: 25/30 m/min C axis rapid traverse: 200 rpm Travel X axis: 260 mm Z axis: 510 mm Y axis: 115 mm (+70 mm / -45 mm) Machine data Width: 3,330 mm (without feeder and conveyor) Depth: 1,800 mm Height: 2,250 mm Machine weight: 5,250 kg Accessories: - OSP-P300L Advanced One Touch CF-M-E set including: * Coordinate transformation function * Profile generation function Klodpfx Aloy A N Hxo Nsr * Advanced One Touch IGF * 3D machining process simulation * Overcut time control * Load monitoring (spindle, feed axes) * NC operation monitoring (incl. part counting) * Cycle time reduction function * Hi-Cut Pro function * Spindle speed control function - High-pressure cooling, max. 20 bar, max. 50 l/min - Material feeder ILS type MUK 7012, with bar magazine 6–70 mm/1,250 mm, year 05/2014, manufacturer Kurt Breuning – IRCO Maschinenbau GmbH, Steinenbronn - Filtermist FX4002 extractor Machine equipment: - Collet chuck: SMW AUTOBLOK: KSZ-DZN-065-A06 201342 (currently on main spindle) Collets for dia. (mm): 6–7–8–9–10–11–12–13–14–15–16–17–18–19–20–21–22–23–24–25–26–27–28 –29–30 31–32–34–35–36–38–39–40–41–42–44–45–46–48–50–51–53–55–57–60–64–6 5 Collets with keyway dia. (mm): 55–60–65 - Collet chuck: SMW AUTOBLOK: KSZ-DZN-042 Z140 205073 (currently on sub spindle) Collets for dia. (mm): 6–7–8–9–10–11–12–13–14–15–16–17–18–19–20–21–22–23–24–25–26–27–28 –30 31–32–34–35–36–39–38–40–41 - Holders: Axial holder - 5x; Toolholder - 5x; Parting blade holder - 2x; Double-face driven tool holder - 3x; Cross driven tool holder - 3x - Reducing bushing (made from bar stock) - Reducer – nylon dia. (mm): 12–14–15.5–17–20–22–24–26–28–30–31–34–36–38–40–42–44–47–50–52 06/2019 spindle repair due to defective bearings. 06/2025 U4 control unit replaced. 10/2025 M control unit replaced. Repairs performed by manufacturer (supplier) technicians, original parts used after overhaul.

Stanje: dober (rabljeno), Leto izdelave: 2002, Ref. št.: 10434 Proizvajalec: OKUMA Tip: LC 40 Leto izdelave: 2002 Vrsta krmiljenja: CNC Krmiljenje: FANUC 18-i TB Lokacija skladišča: Halberstadt Država izvora: Nemčija Število vrtljajev: 10 - 2.800 vrt/min Prehod palice: 91 mm Premer vpenjalne glave: 450 mm Premer konjička: 120 mm Premer struženja: 550 mm Dolžina struženja: 800 mm Obodni premer: 800 mm Prehod vretena: 90 mm Vpenjalna glava vretena: A2-8 Pomik pinole konjička: 150 mm Skupna potrebna moč: 44 kW Približna teža stroja: 8 t Število orodnih postaj: 12 kos. Kljdpfx Aoy Ed Ayjl Nsr

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2008, največja hitrost vretena: 4.200 obr/min, potovalna razdalja osi X: 200 mm, pomik po osi Z: 1.000 mm, moč vretenovega motorja: 22.000 W, skupna višina: 2.300 mm, skupna širina: 2.100 mm, skupna masa: 6.100 kg, največja dolžina izdelka: 3.900 mm, število mest v zalogovniku orodij: 24, število osi: 5, This 5-axis Okuma LB3000EX MYW was manufactured in 2008. It features a maximum turning diameter of 360 mm and a Z-axis travel of 1000 mm. The machine is equipped with a twin-spindle configuration and an OSP-P200 control system. If you are looking for a high-quality lathe, you should consider the Okuma LB3000EX MYW horizontal turning machine we are offering for sale. Please contact us for further details. • Maintenance contract: Yes • Utilisation: 60% • Shifts: 2 • Number of turrets/magazines: 2 • Priority: 3 • Maximum turning diameter: 360 mm • Spindle configuration: Twin spindle • Control system: OSP-P200 • Tool holder: BMT 60 • Turret: 12 stations • Spindle bore: approx. 80 mm • Electrical maintenance was performed 1.5 years ago. Some electrical components were replaced or cleaned at that time. Additional equipment Klsdpfjy Ddtvsx Al Nor • Bar feeder • OPTIONAL for an extra charge: Approx. 200 tools available, collets, powered tools Technical Specification Counter Spindle: No Driven Tools: Yes

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2011, moč vretenovega motorja: 22.000 W, največja hitrost vretena: 3.800 obr/min, potovalna razdalja osi X: 1.670 mm, pomik osi Y: 505 mm, pomik po osi Z: 190 mm, skupna višina: 2.950 mm, skupna širina: 2.960 mm, skupna masa: 13.700 kg, največja dolžina izdelka: 5.110 mm, število osi: 9, This 9-axis Okuma MAC TURN 350-W was manufactured in 2011. It features a maximum turning diameter of 550 mm and a center distance of 1500 mm. The machine is equipped with a powerful main and sub spindle, both reaching a spindle speed of 3,800 rpm and a milling spindle speed of 12,000 rpm. If you are looking for top-quality turning and milling capabilities, consider the Okuma MAC TURN 350-W turn-mill center that we are offering for sale. Please contact us for further details. • Control unit: OKUMA OSP P200L-H • Included control options: Collision Avoidance System (CAS), One Touch IGF, helical interpolation • Distance between centers: 1500 mm • Maximum swing diameter over covers: 550 mm • Maximum turning diameter: 550 mm • Bar capacity: 75 mm • Main spindle: • Attachment: ASA 8" large bore • Sub spindle: • Attachment: ASA 8 Super Big Bore • Speed: 3,800 rpm • Power: 22/15 kW • Milling spindle: • Taper: HSK A63 • Speed: 12,000 rpm • Power: 11 kW • Tooling: • Tool magazine: 44 positions • Lower turret: 12 positions with live tooling • Axes: • Axis travels: 1670 mm / 1655 mm; 505 mm / 210 mm; 190 mm • B-axis: Continuous 210° • C-axis: 360,000 increments • Coolant/pump pressure: 15 bar Kledpfoy Ddiwex Al Nor • Operating hours (as indicated): • 30870: 8:15 • 13909:49:34 • 6594: 8:59 • 9497:37:03 Additional equipment • Chip conveyor Technical Specification Counter Spindle No Driven Tools No

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2016, potovalna razdalja osi X: 925 mm, pomik osi Y: 1.050 mm, pomik po osi Z: 600 mm, obremenitev mize: 600 kg, največja hitrost vretena: 12.000 obr/min, moč vretenovega motorja: 26.000 W, število osi: 5, This 5-axis Okuma MU 6300 V was manufactured in 2016. It features an impressive X-axis travel of 925 mm, Y-axis travel of 1,050 mm, and Z-axis travel of 600 mm. The machine has a maximum load capacity of 600 kg and a C-axis table diameter of 630 mm. If you are looking for high-quality machining capabilities, consider the Okuma MU 6300 V vertical machining center we have for sale. Contact us for further details. • Table/C-axis diameter: 630 mm • Max. workpiece dimensions: Ø 830 x 550 mm • C-axis rotation: 360,000 positions / 360° continuous • A-axis rotation: +90° to -120° • Distance between table and spindle: 60 - 660 mm • Rapid traverse (X/Y/Z): 50 m/min • Maximum feed rate: 50,000 mm/min • Positioning accuracy (X/Y/Z): 0.004 mm (Std JIS) • Repeatability (X/Y/Z): mm (Std JIS) • Spindle taper: BT50 Big Plus • Tool magazine: Matrix, 98 positions (expandable to 166) • Axis feedback: X-Y-Z optical scales Kljdpfx Ajy Dc Nisl Nor • Operating hours: Power on 25,683 h; Operating 10,364 h; Cutting 9,209 h • Included control/software options: 5-Axis Super-NURBS Kit, Centering Tool Programming, Tool Length Compensation, DNC-DT Interface, Tool Orientation Command Additional Equipment • Mayfran MT10 chip conveyor • Renishaw TS27R tool setter • Renishaw RMP60 workpiece probe • 5-axis calibration set • Coolant shower • Pallet changer ready (preparation) • Industry 4.0 kit (registered 2026) Technical Specification Taper size BT 50

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2010, največja hitrost vretena: 4.500 obr/min, potovalna razdalja osi X: 165 mm, pomik po osi Z: 400 mm, moč vretenovega motorja: 11.000 W, skupna višina: 1.569 mm, skupna masa: 3.800 kg, proizvajalec krmilnikov: OKUMA, model krmilnika: OSP P200 L, število osi: 3, This 3-axis Okuma GENOS L200E-M was manufactured in 2010. It features a maximum turning diameter of 200 mm and a turning length of 380 mm. The machine is equipped with a spindle speed of 4,500 rpm and a main spindle power of 11 kW. If you are looking for a high-quality lathe, you should consider the Okuma GENOS L200E-M horizontal turning center we offer for sale. Contact us for further details. • Max. swing over covers: 450 mm Klsdpsy A I Stefx Al Njr • Max. turning diameter: 200 mm • Max. turning length: 380 mm • Spindle nose: ASA A2-6 • Front bearing diameter: 100 mm • Spindle bore: 62 mm • Bar capacity: 50 mm • Rapid traverse (X/Z): 20–25 m/min • Tailstock taper: MT No. 5 • Tailstock quill stroke: 100 mm • Turret type: VDI-30 V12 • Indexing time (1 position): 0.1 sec • OD tool size: 20 x 20 mm • ID tool size: 32 mm • Driven tool speed: 6,000 rpm • Driven tool power: 4.0 / 1.8 kW • Overall dimensions: 2.081 x 1.550 m • Total power-on hours: 23,498 hours • Operating hours: 6,490 hours • Cutting hours: 5,278 hours Additional Equipment • Static tool holders included Technical Specification Counter spindle: No Driven tools: No

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2008, največja hitrost vretena: 3.200 obr/min, potovalna razdalja osi X: 350 mm, pomik po osi Z: 920 mm, moč vretenovega motorja: 40.000 W, skupna višina: 2.600 mm, skupna širina: 2.600 mm, skupna masa: 13.500 kg, največja dolžina izdelka: 5.200 mm, število mest v zalogovniku orodij: 100, število osi: 4, This 4-axis Okuma LU35-M was manufactured in 2008. It features a maximum turning diameter of 550 mm and a Z-axis travel distance of 920 mm. The machine is equipped with two turrets, offering a total of 22 tool stations, and operates at a spindle speed of 3,200 rpm. If you are looking for a high-quality lathe, you should consider the Okuma LU35-M horizontal lathe, which we are offering for sale. Contact us for further details. • Maintenance contract: Yes • Utilization: 85% • Shifts: 2 • Number of tools: 12 • Number of turrets/magazines: 2 • Maximum turning diameter: 550 mm • Control system: OSP-P200L • Turret A: 12 stations • Turret B: 10 stations • Spindle bore: 90 mm • Supply voltage: 400 V • Phase: 3 • Frequency: 50 Hz • Rated power: 53.1 kVA • Full load current: 76.7 A • Maximum motor current: 134 A • Interrupting capacity: 10 kA • X-axis travel (A turret): 350 mm (equivalent to max. Ø700 mm) • X-axis travel (B turret): 240 mm (equivalent to max. Ø480 mm) Kedpfxjy A Ibhj Al Nolr OPTIONAL at extra cost: approx. 100 tools, clamping elements, set of chuck jaws, 2-jaw chucks, zero-point clamping system. Electrical maintenance was performed 1.5 years ago, during which several electrical components were replaced or cleaned. Technical Specification Counter Spindle: No Driven Tools: No Taper Size: VDI 50

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2010, obratovalne ure: 32.760 h, potovalna razdalja osi X: 1.500 mm, pomik osi Y: 660 mm, pomik po osi Z: 660 mm, skupna višina: 3.300 mm, skupna širina: 5.800 mm, obremenitev mize: 1.500 kg, skupna masa: 11.000 kg, največja hitrost vretena: 15.000 obr/min, moč vretenovega motorja: 22.000 W, število mest v zalogovniku orodij: 48, teža orodja: 8.000 g, največja dolžina izdelka: 3.000 mm, število osi: 3, This 3-axis Okuma MB66-VA was manufactured in 2010. It features travel distances of 1500 mm on the X-axis, 660 mm on the Y-axis, and 660 mm on the Z-axis. The machine comes with a table size of 1530 x 660 mm and a maximum table load of 1,500 kg. If you are seeking high-quality machining capabilities, you should consider the Okuma MB66-VA vertical machining centre we have available for sale. Contact us for further details. • Maintenance contract: Yes • Condition: An electrical maintenance was performed approximately 1.5 years ago; some electrical components were replaced or cleaned (guides, linear axes, geometry) • Utilization: 70% Kjdjy Ama Njpfx Al Nelr • Shifts: 2 • Operating hours: 32,760 h • Control system: OSP-P200M • Table size: 1530 x 660 mm • 4th axis: possible (separately controlled) • Spindle speeds: 8,000 / 12,000 / 15,000 rpm • Magazine capacity: 20 standard (optionally 32 or 48) • Number of turrets/magazines: 1 • Maximum tool length: 300 mm • Maximum tool diameter: 125 mm • Rated voltage: 400 V • Number of phases: 3 • Frequency: 50 Hz • Maximum power consumption: 42.6 kVA • Total current draw: 61.5 A • Maximum motor current: 112 A • Short-circuit withstand capacity: 15 kA • Voltage: 200 VAC, 50 Hz, 3~ • Control voltage: 24 VDC • Power: 9 kW • Weight: 50 kg Additional equipment • Optional: Zero-point clamping plate for table 1530 x 660 mm available at extra cost • Optional: Approx. 530 tools available at extra cost Technical Specification Taper size: SK 40

Stanje: rabljeno, Horizontal machining center, 6 pallets, OKUMA MA40 HAT 6P, OSP U100M CNC, 6 pallets, 400 mm x 400 mm, max. 400 kg, max. workpiece dimensions 600 x 710 mm. Spindle: BT40 / through-spindle coolant. 4th axis: 1° indexing. Tool changer: 100 positions. 200 tool holders available. Travels: X = 560 mm, Y = 610 mm, Z = 560 mm. Rapid traverse: 40 m/min. Installed and powered on at Mimu Machine Tools (Italy). X travel: 560 mm Kljdpst Ek Slefx Al Nor Number of pallets: 6 Pallet size: 400 x 400 mm

Stanje: rabljeno, Leto izdelave: 2008, CNC stružnica Okuma LB3000 EX letnik 2008 z gnanimi orodji in krmilnikom Okuma OSP-P200L Maks. premer struženja: ø340 mm. Maks. dolžina struženja: 1.000 mm. Premer nad posteljo: 580 mm. Premer nad suportom: 470 mm. Premer vretena: ø80 mm. Kapaciteta vretena: ø120 mm. Hitrost vretena: 45–5.000 vrt/min. Os Z: 1.065 mm. Os Y: 260 mm. Revolver: 12 postaj (vse gnana orodja). Hitrost gnanih orodij: 45–6.000 vrt/min. Os C: 360° indeksiranje. Konica: MT5. Moč vretena: 22 kW. Serijska št.: 141960 (2008) Kljdpfx Ajy Dr I Iel Nsr Teža stroja: 6.150 kg. Skupne mere (D x Š x V): 3.500 x 1.900 x 2.000 mm. Vključen transporter za odrezke: pribl. 4.700 x 600 x 1.500 mm

Stanje: rabljeno, Leto izdelave: 2000, Maksimalni premer struženja: 800 mm Maksimalna dužina struženja: 800 mm Stezna glava: bez Dokumentacija: uključena Upravljački sistem: Okuma OSP Opseg obrtaja: 10-2800 o/min Prečnik šipke: približno 91 mm Nosač vretena: A2-8 Snaga: 44 kW Prečnik stezne glave: oko 450 mm Revolver: 12 pozicija Konjić: oko 150 mm Težina mašine: oko 8 t +++++ Molimo da obratite pažnju da je mašina u demontiranom i spremnom za utovar stanju. Zbog toga demonstracija pod naponom ili izrada video snimka nisu mogući. Naš oglas sadrži najreprezentativnije fotografije najvišeg mogućeg kvaliteta. Slanje dodatnih slika, nažalost, nije moguće. +++++ Kledsh D Anaopfx Al Nsr

Stanje: dober (rabljeno), Leto izdelave: 2001, CNC lathe Manufacturer: OKUMA Type: LB-250T Model: OSP-U10L Ksdpfx Alok Hz Iwj Nslr Year of manufacture: 2001 2-axis CNC lathe with robotic loading Description: 2-axis (X-Z) lathe for short workpieces, equipped with a robotic workpiece magazine X-axis travel: 180 mm Z-axis travel: 325 mm Spindle speed: 4500 rpm Coolant system and chip conveyor

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1997, Maks. premer struženja 250 mm. Maks. premer nad ležiščem 530 mm. Maks. dolžina struženja 500 mm. Klsdpfx Alsy Dhf Nj Nor 12-pozicijska revolverska glava VDI 40 Transporter za ostružke Dimenzije cca. 3335 mm, 1900 mm, 1900 mm. Teža stroja cca. 5800 kg.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2008, največja hitrost vretena: 5.000 obr/min, potovalna razdalja osi X: 260 mm, pomik po osi Z: 565 mm, moč vretenovega motorja: 22.000 W, skupna višina: 2.300 mm, skupna širina: 2.100 mm, skupna masa: 6.000 kg, največja dolžina izdelka: 3.900 mm, število osi: 3, Ta 3-osni stružnica Okuma LB3000 EX je bila izdelana leta 2008. Ima maksimalni premer struženja 340 mm in konjično razdaljo 1020 mm. Stroj je opremljen z zmogljivim krmiljem OSP-P200 in ponuja območje vrtljajev vretena od 45 do 5000 min⁻¹. Če iščete visokokakovostno stružnico, razmislite o horizontalni stružnici Okuma LB3000 EX, ki jo imamo na voljo za prodajo. Za več informacij nas kontaktirajte. OPTIONALNO za doplačilo: Na voljo približno 200 orodij. Kledoy Aaxropfx Al Nsr Pred 1,5 leti je bilo izvedeno električno vzdrževanje, pri katerem so bili nekateri električni deli zamenjani ali očiščeni. Tehnične specifikacije Kontra vreteno: Ne Pogonska orodja: Da

Stanje: zelo dobro (rabljeno), Leto izdelave: 2016, Funkcionalnost: popolnoma funkcionalen, Krmilnik OKUMA OSP-P300M Velikost mize: 1300 x 560 mm Maksimalna obremenitev mize: 900 kg Pomik v osi X: 1050 mm Pomik v osi Y: 560 mm Pomik v osi Z: 460 mm Hitrost vretena: 12.000 min⁻¹ Vpenjalni stožec: SK50 Magazin: 32 mest Potreba po električni moči: 22,2 kVA / 400V Skupna teža: 7700 kg Dimenzije (D x Š x V): 2900 x 2450 x 2900 mm Dodatna oprema, oprema - Transporter za odrezke Ksdpeyvr N Nsfx Al Nelr - Hladilni sistem - Transformator - Nekaj vpenjalnih prijemal s privijačnimi vijaki - Hladilnik vretena - Dvižne kljuke - Priročniki Stroj se prodaja zaradi zaprtja podjetja.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2005, proizvajalec krmilnikov: OKUMA, model krmilnika: OSP E-100M, število osi: 4, To 4-osno horizontalno obdelovalno središče Okuma MA-600HB je bilo izdelano leta 2005. Idealno za zahtevne obdelovalne naloge, odlikuje ga robustna konstrukcija in natančnost. Razmislite o možnosti nakupa tega horizontalnega obdelovalnega centra Okuma MA-600HB. Za več informacij nas kontaktirajte. Dodatna oprema Kljdpfsx D Nlzox Al Nsr • Balluf bralno/pisalna enota • Renishaw MP10 • 30 barov hladilne tekočine • Mayfran Consept 2000 Prednosti stroja Tehnične prednosti stroja • NC-miza (natančnost 0,001 stopinje) • ATC s 320 mesti (80 mest za 600 mm orodja) • Kontrola preloma orodja • MOP-kontrola orodij Dodatne informacije Stroj je še vedno priključen na električno omrežje

Stanje: zelo dobro (rabljeno), Leto izdelave: 2013, Funkcionalnost: popolnoma funkcionalen, CNC stružno-rezkalni center Okuma LT 2000 EX -MY 2ST Krmilnik: OSP-P300L Letnik: 2013 Interna št. stroja: 24 Premer struženja nad posteljo: 400 mm Razdalja med konicama: 960 mm Premer struženja: 210 mm Hitrost vrtenja: 50 – 6.000 obr/min Hitrost protivretena: 50 – 6.000 obr/min Pomiki: W-os: 730 mm X-os: 205 mm C-os: 360 stopinj (0,001) 2 kosa revolverskih glav z 16 mesti vsaka (vsa mesta gnana) Oprema: Klsdpfxjyvfhdo Al Nsr - Transporter za ostružke - Filtrirna naprava s papirnatim trakom in visokotlačno črpalko - 2x 3-čeljustni vpenjalni tulec Kitagawa - OGL portlni nalagalnik s pribl. 5 kg nosilnosti - Skladiščni magazin s 20 mesti - Touchsetter - Merilna sonda Renishaw - Odsesovalna naprava - različna dodatna oprema

Stanje: dober (rabljeno), Leto izdelave: 2005, Machine was serviced annually under a maintenance contract with Okuma. Okuma Mac Turn 550 W / 9-axis turning-milling center Year of manufacture: 2005 Control: OSP-E 100 L / Expansion kit “M“ Kit One Touch IGF Milling spindle slide X/Y/Z/B Sub-spindle W axis Main spindle with C axis Sub-spindle with C axis Lower turret slide X/Z axis Max. turning diameter: 720 mm Turning length: 2,000 mm Distance between tailstock tip and spindle nose: 2,505 mm Y axis: 250 mm / ±125 mm Main spindle speed up to 3,500 rpm Spindle power: 30 kW Lower turret: 12 positions, no driven tool stations Lower turret with steady rest, therefore only 9 stations instead of 12 Self-centering steady rest: 35 – 240 mm Milling spindle with infinitely variable B axis (0.001°) Magazine: 80 positions Tool holder: HSK 100 New Forkhardt three-jaw chuck, Ø 400 mm, valued at €12,000 Sub-spindle currently without chuck, equipped with arbor / delivery without arbor Enlarged main spindle, 110 mm (Ø 150/110 mm) Spindle nose size 11 2-stage clamping pressure Sub-spindle as hollow shaft motor, speed up to 3,800 rpm Ethernet LAN interface Renishaw in-process measuring system Additional measurement system for Y axis Maximum tool length: 450 mm instead of 350 mm Door automation for both doors Chip conveyor Gravity band filter with 900-liter clean tank Frequency-controlled supply pump up to 20 bar Machine was serviced annually under a maintenance contract with Okuma. In 2023, the cable track of the W axis, including all hoses, was replaced. In October 2024, linear guides X/Y/Z were renewed. Works carried out by Okuma: - Machine cleaned - Sheet metal covers dismantled - 8th axis removed - Gantry removed and lifted out of the machine. ATC removed and lifted out. - All linear guides removed - Mounting surfaces of the ZA axis cleaned - New ZA linear guide, including carriages, installed and tightened to specified torque - New ZA ball screw, including bearings, installed - Base plate of the gantry installed and tightened to specified torque, or bolted to the carriages. Lubrication lines connected. - ATC including add-on parts installed and connected - New linear guides for YA and XA installed and tightened to the corresponding torques. New YA ball screw with bearings installed - Gantry installed and lubrication lines connected. XA base plate installed and aligned - 8th axis assembled and aligned - H1 turret assembled - Drive motor of the 8th axis installed - 8th axis plus new H1 installed and geometry set - Functional test of 8th axis and H1 Kjdpfxsyt Nvtj Al Nelr - Run-in program for B axis approx. 12 hours, then drain old oil from 8th axis - Run-in program for H1 and defect report for OEG created - Left door installed, various sheet metals adjusted - Power chuck installed - Zero points adjusted - Tool change checked

Stanje: zelo dobro (rabljeno), Leto izdelave: 2021, CNC stružnica Okuma Genos L3000 e MYW Krmilnik: OSP-P300LA-e Letnik proizvodnje: 2021 Interna številka stroja: 15 maks. obdelovalni premer: 390 mm Premer nad prečnim drsnikom: 260 mm maks. dolžina struženja: 500 mm Pomiki: X-os: 235 mm Z-os: 450 mm Kledpfx Aeyt E A Nol Ner Y-os: ±50 mm C-os: 360° / 0,001° Revolver: 12 postaj – vse pogonske Hitrost vrtenja: 38 - 3.800 min⁻¹ Orodno vpenjanje: VDI 40 Dodatna oprema/Pribor - Transporter za ostružke - Touchsetter - one Touch IGF - Pobiralnik kosov - Ojačana hladilna naprava 8 bar - Izvlečna naprava

Stanje: rabljeno, Okuma LB400 Ksdoy Apq Ropfx Al Nolr