Mte Bt3200 nakup rabljenega (841)

Stanje: rabljeno, Leto izdelave: 2014, potovalna razdalja osi X: 3.000 mm, pomik osi Y: 1.200 mm, pomik po osi Z: 1.500 mm, največja hitrost vretena: 6.000 obr/min, hitrost vretena (min.): 20 obr/min, RepairFIT by Dornhöfer The Difference. Including Installation & Commissioning! TECHNICAL MAIN DATA Year of manufacture: 2014 Travel ranges / Axis travels: Longitudinal (X): mm 3,000 Cross (Y): mm 1,200 Vertical (Z): mm 1,500 Clamping table / Table area: Length: mm 3,200 Width: mm 1,000 Number of T-slots on the table surface: Units: 7 T-slot size: mm 22H12 Reference slot: mm 22H7 Distance between slots: mm 140 Max. workpiece load: kg 11,000 Paintwork: Graphite grey RAL 7024 and agate grey RAL 7038 Tool holder: ISO 50, DIN 69871 AD Pull stud: DIN 69872 Form A Main drive: Max. drive power: From 198 rpm kW 30 Spindle speed range: Spindle speed: min⁻¹ 20–6,000 Max. torque: Nm 935 Spindle speed control: 3-stage (oil-cooled) With automatic changeover Feeds: X-, Y- and Z-axis mm/min 2–15,000 Max. rapid traverse speed: X-, Y- and Z-axis mm/min 25,000 Max. feed force: X-, Y- and Z-axis: N 22,000 Space requirements: Length approx. BT3200 mm 8,100 (without cross conveyor + 1,280mm) Height approx. (at Z=1,500mm) mm 3,800 Width approx. (at Y=1,200mm) mm 5,000 (with spacer 4,500mm) Weight: kg approx. 20,200 Connected load: kVA approx. 52 Dusdsygipajpfx Afaeu HEIDENHAIN iTNC 530 HSCI Automatic MTE universal milling head Diagonal 2.5° x 2.5° Automatic tool changer with 40 positions 2 chip conveyors + cross conveyor Coolant system with 20 bar & ICS (internal coolant supply) RepairFIT is our proven solution for a profitable entry into our product lines. The machines available in this line are procured after a strict selection process and undergo a thorough inspection (deep-dive check). After intensive cleaning, any obvious faults and defects identified are professionally repaired by our skilled service team.

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2007, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 4.000 mm, pomik osi Y: 1.200 mm, pomik po osi Z: 1.500 mm, največja hitrost vretena: 3.000 obr/min, hitrost vretena (min.): 20 obr/min, širina mize: 1.000 mm, dolžina mize: 4.200 mm, RepairFIT by Dornhöfer The Difference. Including installation & commissioning! TECHNICAL MAIN DATA Year of manufacture: 2007 Capacities / Travels: Longitudinal (X): 4,000 mm Transversal (Y): 1,200 mm Vertical (Z): 1,500 mm Table size: Dujdpfx Aoy T Elljfasu Length: 4,200 mm Width: 1,000 mm T-slot width: H9 Reference slot: H7 Paint finish: RAL 5010 and RAL 9002 Tool holder: ISO 50, DIN 69871 AD Pull stud: DIN 69872 Form A Main drive: Drive power: 30 kW Spindle speed range: Spindle speed: 20–3,000 rpm Feed rates: X, Y, and Z axes: 2 – 12,000 mm/min Max. rapid traverse speed: X, Y, and Z axes: 15,000 mm/min Weight: approx. 22,000 kg HEIDENHAIN iTNC 530 Automatic MTE Diagonal Milling Head Coolant system RepairFIT is our proven offering for a profitable entry into our product lines. Machines available in this line are sourced through a strict selection process and subjected to a thorough inspection (Deep-Dive-Check) by our team. After intensive cleaning, any obvious defects and faults detected are professionally rectified by our expert service team.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2000, Takoj na voljo na lokaciji: CNC posteljni rezkalni stroj MTE Tip Kompakt Plus Leto izdelave 2000 Heidenhain TNC 410 Miza 2200 x 750 mm Pomiki X/Y/Z 2000/800/800 mm Obremenitev mize 4 t Vpenjalo SK 50 Duedezb Dh Hopfx Afasu Hidravlično vpenjanje rezkarja Vrtljaji vretena 40 – 2500 min⁻¹ Moč vretena 15 kW Skupna potrebna moč 30 kW Hladilna naprava Teža 12 t Cena: 11.000,— EUR + DDV, iz lokacije

Stanje: rabljeno, Leto izdelave: 2021, obratovalne ure: 13.640 h, številka stroja/vozila: 21121341, Kataloška št.: 1.2, 3 zaščitni vozički z ogledom iz pleksi stekla, vsak 250x300 cm, krmiljenje HEIDENHAIN TNC-640, 6 krmiljenih osi, držalo orodja SK50, ploščno polje: 9.000x2.000 mm, največja dovoljena obremenitev mize: 30 t, hodi X/Y/Z: 8.000/1.300/2.500 mm, posebna oprema: avtomatska brezstopenjsko vrtljiva univerzalna rezkalna glava v 2 nivojih, IKZ, avtomatski menjalec orodij za 60 orodij, rotacijska miza (10 t, 1.500x1.500 mm), vpenjalna površina, brezstopenjsko nastavljiva, merilna sonda RENISHAW, 4 vpenjalni koti, možnost zunanjega programiranja preko Mastercam, prodaja vmes pridržana. Duodpfx Asy T Nx Aofasu

Stanje: zelo dobro (rabljeno), 1 rabljena, zelo dobro ohranjena univerzalna rezkalna glava sistem "HURON" s hidravličnim vpenjanjem orodja Proizvajalec: EMENA - MTE, poreklo Španija Model: VAR 3 - BF, BM, KOMPAKT Tehnični podatki: Vreteno: ISO 50 Domet: 358 mm Djdoyc Eizopfx Afajuu Maks. število vrtljajev: 3000 min⁻¹ Maks. pogonska moč: 22 kW Montirna prirobnica: Zunanji premer: Ø 306 mm Mere (D x Š x V): 460 x 306 x 360 mm Teža: ca. 150 kg Oprema / Posebnosti: • 2 vrtilni osi sistem "HURON" • Hidravlično vpenjanje orodja • Primerna za naknadno vgradnjo na konvencionalne, NC ali CNC rezkalne stroje (npr.: MTE, LAGUN, CORREA, ZAYER, CME, AYCE, SACEM, JUARISTI, UNION, ARSENAL, ...) ali katerikoli vrtalni stroj, … Ta visokokakovostna rezkalna glava je bila uporabljena kot nadomestna glava in je bila uporabljena samo v času popravil, ko je bila druga rezkalna glava v servisu in obnovi. Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund-Wambel

Stanje: dober (rabljeno), Leto izdelave: 1998, Ref. št.: 10583 Proizvajalec: MTE Tip: BF 4200 Leto izdelave: 1998 Vrsta krmiljenja: CNC Krmiljenje: Heidenhain TNC 426 Lokacija skladišča: Halberstadt Država izvora: Nemčija X-hod: 4000 mm Y-hod: 1200 mm Z-hod: 1500 mm Število vrtljajev: 2.500 o/min Hitri pomik X/Y/Z: 400 m/min Vpenjalna površina mize (D x Š): 4200 x 1000 mm Menjalec orodij: 40 Največja obremenitev mize: 13.000 kg Vpenjalo orodja: SK 50 Teža: 20 t Število T-utorov: 7 kos Širina T-utorov: 22 mm Razdalja med utori: 140 mm Duedpfx Afey Ed Ipoaeu Dodatne informacije: - Heidenhain ročni kolesni upravljalnik HR410 - 3D skener, infrardeč - Kroglično vreteno na oseh Z in Y je vpeto in leži na kombiniranih radialno/aksialnih valjčnih ležajih in radialnih krogličnih ležajih s togostjo 250 N/qm. Stroj je mogoče videti pod napetostjo.

Stanje: rabljeno, Leto izdelave: 2013, obratovalne ure: 18.995 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: VH-20053, potovalna razdalja osi X: 2.000 mm, pomik osi Y: 1.000 mm, pomik po osi Z: 1.500 mm, hitro pomikanje X-os: 10 m/min, hitri pomik os Y: 10 m/min, hitri pomik na osi Z: 10 m/min, hitrost pomika os X: 5 m/min, hitrost podajanja osi Y: 5 m/min, hitrost podajanja os Z: 5 m/min, položaj glave za glodanje: mittig, največja hitrost vretena: 3.500 obr/min, hitrost vretena (min.): 50 obr/min, širina mize: 1.050 mm, obremenitev mize: 5.000 kg, dolžina mize: 2.100 mm, višina mize: 860 mm, skupna višina: 3.500 mm, skupna širina: 4.485 mm, skupna dolžina: 5.550 mm, vrsta vhodnega toka: Klimatska naprava, teža obdelovanca (maks.): 5.000 kg, skupna masa: 11.000 kg, širina krmilne omare: 600 mm, moč: 25 kW (33,99 KM), dolžina elektro omare: 1.275 mm, višina krmilne omare: 2.370 mm, Oprema: vrtilna hitrost brezstopenjsko nastavljiva, À vendre : fraiseuse à banc CNC MTE BF-2000, année 2013, en très bon état et avec une faible utilisation. Idéale pour les travaux d’usinage de précision et de forte capacité dans la construction mécanique et la fabrication d’outils. La conception robuste du banc et la broche puissante permettent l’usinage fiable de pièces de grande taille et lourdes. La machine est entretenue, en état de fonctionnement, et une visite est possible sur rendez-vous. Autres données techniques et accessoires sur demande. Commande Siemens 840D SL Cône de broche SK50 (DIN69871) Dodpjytqdrofx Afaeuu Le prix indiqué s’entend hors démontage, emballage et expédition. Vente depuis site, sous réserve de vente préalable. Les machines sont vendues en état d’occasion ; toute garantie ou réclamation est exclue.

Stanje: rabljeno, Leto izdelave: 2015, Verfahrweg - x 3.000 mm Verfahrweg - y 1.500 mm Verfahrweg - z 2.000 mm Steuerung HEIDENHAIN - iTNC 530 Drehzahlbereich 0 - 6.000 U/min mit NC-Rundtisch 1.600 x 1.400 mm Werkstückgewicht 12.000 kg Anzahl der Plätze im Werkzeugwechsler 40 Werkzeugaufnahme SK50 CNC Bettfräsmaschine - Universal | MTE - RT-3000 mit integriertem NC-Rundtisch, IKZ (20 bar), Funkmesstaster und 40-fachem Werkzeugwechsler ausgestattet. Die Maschine ist in einem guten Zustand und kann unter Strom besichtigt werden. Djdpfsy E Txqsx Afaeuu Bitte entnehmen Sie weitere Ausstattungsinformationen zu dieser Maschine aus der im Angebot beigefügten Original- Auftragsbestätigung. Das Maschinenvideo vom Werksstandort teilen wir gerne auf Anfrage mit Ihnen. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: RT30 | RT 30

Leto izdelave: 2002, stanje: dober (rabljeno), Hinge width: 300 mm Insertion width / height: 390 x 100 mm Insertion length: 4615 mm Height from floor to lower edge of chip chute: 700 mm Hinge drive: 0.37 kW Transport dimensions (L x W x H): approx. 5965 x 750 x 1010 mm (height without feet!) Dedpjmdqx Hefx Afaeuu Weight: approx. 500 kg Adjustable foot height: yes This hinge-type chip conveyor, manufacturer TEKNICALDE, model TC 1 ½ 300, was used on an MTE Kompakt CNC bed-type milling machine. Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1998, All detailed information is in the photos; for further details, please contact us. Djdpsw Dt Tlefx Afaeuu

Stanje: rabljeno, Leto izdelave: 2009, skupna dolžina: 2.550 mm, Vlačilec Mafi MTE 2/15, električni pogon, leto izdelave 2009 Duedpfx Afsy E Ubgeaeu

Stanje: novo, MIG/MAG - Pulzni MIG/MAG - TIG DC HF - Elektrodno varjenje Enofazna napajalna napetost 1x230V Inverterska tehnologija greenWave® Vgrajena enota za podajanje žice 9 inovativnih varilnih postopkov Böhler Welding 3,5'' barvni LCD upravljalni panel Duodpfsyrfd Rox Afaeu 220A pri 35% (40°C) 23,7 kg

Stanje: novo, Višina konic 260 mm Višina konic 1000 mm Premer vrtenja nad posteljo 520 mm Premer vrtenja nad prečnim suportom 265 mm Širina postelje 320 mm Premer vretena 62/110 mm Vpenjanje vretena Camlock 6/8“ Območje vrtljajev 0 - 2000 vrt/min Moč vretena 10,7 kW Hitri pomik X/Z 3 m/min. Sila pomika X 250 daN Sila pomika Z 500 daN Dimenzije (D x V x Š) 2532 x 1506 x 1790 mm Duodpjyxb Dnsfx Afaju Teža 2150 kg

Stanje: rabljeno, Leto izdelave: 2009, skupna dolžina: 2.850 mm, Vlačilec Mafi MTE 2/15, električni pogon, leto izdelave 2009 Duedpfsyfiffex Afasu

Stanje: pripravljen za uporabo (rabljen), Migatronic MTE 440 TIG AC/DC welding machine for steel and aluminium. Water cooling unit: Migatronic CTU 3000. Djdpfoh Ib Idox Afaeuu Maximum welding current: 440 A. Inspected by EWM Service. You are welcome to arrange a viewing. You will receive a proper invoice. For international customers, a net invoice can be issued, provided a valid VAT ID number is supplied. Subject to prior sale. If you have any questions, please feel free to contact us by phone. The mentioned company names and trademarks are the property of their respective owners and are used for identification and description purposes only. Technical data may vary, and errors in the description of the item may occur and are subject to change. Shipping is only available to commercial customers – private buyers can only collect the item in person.

Stanje: rabljeno, Leto izdelave: 1978, Pressure 7 t Outreach 180 mm Stroke 100 mm Table surface 300x300 mm Ram surface Ø105 mm Clear opening in table Ø60 mm Table height 1050 mm Dodsvnwfbjpfx Afaeuu Pin hole in ram Ø30 mm Total power requirement kW Space requirement approx. WxDxH 1200x1200x2100 mm Light barrier for safety and cycle operation Travel and pressure cut-off Mechanical fixed stop Foot control

Stanje: novo, Leto izdelave: 2025, Multitel MTE 270 on Iveco 'Daily' – 3.5t truck-mounted aerial platform (self-propelled access platform/lift) – year 2023 – NEW with warranty – Duedeq T Nycspfx Afaeu

Stanje: novo, lastna masa: 6.900 kg, največja dovoljena obremenitev: 14.100 kg, skupna masa: 21.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 5.250 mm, širina tovornega prostora: 2.300 mm, višina nakladalnega prostora: 1.220 mm, prostornina tovornega prostora: 15 m³, skupna dolžina: 2.550 mm, skupna širina: 2.870 mm, skupna višina: 7.580 mm, vzmetenje: zrak, velikost pnevmatike: 600/55 R26.5, velikost sprednje pnevmatike: 600/55 R26.5, velikost zadnje pnevmatike: 600/55 R26.5, gradbena višina: 2.880 mm, Oprema: registracija tovornjaka, zavorni sistem na stisnjen zrak, | FARMTECH GRAVIS 2000 težki prekucni priklopnik | FAD osi s nihajnim agregatom in bobnastimi zavorami (ADR zavorne osi) | HARDOX® jeklo spodaj / ob strani 8 mm / 6 mm | Nakladalne mere/nadgradnja: 5250 x 2300 mm | Kroglična vlečna kljuka K80 | Nihajna zavora za hidravlično zadnjo stranico, nastavljiv kot kipanja | Pnevmatske gume: 600/55 R26.5 | Novo vozilo. Prodaja samo pravnim osebam. Pridržujemo si pravico do napak in predhodne prodaje. | Nihajni agregat za vozila v izjemno zahtevnih delovnih okoljih in na posebej zahtevnem terenu! | ADR zavorne osi so posebej zasnovane za naletne zavorne sisteme in ponujajo cenovno ugodno ter okolju prijazno rešitev. Primerne so za priklopnike do skupne dovoljene mase 8.000 kg in jih je mogoče kombinirati z različnimi zavornimi sistemi. Dujdpfx Aeygw Dfefaou

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2019, obratovalne ure: 2.607 h, Funkcionalnost: popolnoma funkcionalen, Oprema: dokumentacija / priročnik, For sale: As-new PEMTec PEM800 from 2019. The machine can be inspected and tested under power. Operating hours: 9,880 PEM hours: 2,607 Pulse output current: 6,000A HOW THE PROCESS WORKS Metal parts are machined contactlessly and precisely using this process. An electrically conductive electrolyte (saltwater) is introduced between a negatively charged tool electrode (cathode) and a positively charged workpiece (anode). The ionized material is carried anodically out of the machining gap between the electrode and the workpiece. During the process, the electrode is mapped inversely onto the metal. The targeted current pulse, oscillating tool electrode, and extremely small working gap form the foundation for this technology's precision. The PECM process is the further development of electrochemical sinking (ECM). By utilizing synchronized current pulses and an oscillating tool electrode, PEMTec enables an extremely small machining gap. This allows for ultra-precise and cost-effective production with no process-related tool wear. Absolutely contactless machining without thermal or mechanical influences produces workpieces with imaging accuracy and repeatability in the lower micrometer range and surface finishes as fine as 0.03 µm. TECHNICAL DATA - Machine frame made of natural granite Dusdpsy Etcvofx Afaju - Usable working area: 375–545 mm (min./max.) - Machine table: 660 × 540 mm (W × D) - Installation footprint: 2,200 × 2,560 × 2,870 mm (W × D × H), without electrolyte treatment system - Maintenance-free precision working axis with direct drive - Workholding fixture via 6 T-slot rails (M10) in the machine table - Real-time system for process control and short-circuit detection - HMI via 21.5-inch touchscreen - Water-cooled, modular generator from 1,200 A to 12,000 A - Automatic electrolyte treatment system - Optional XY alignment aid and C axis - The electrolyte system’s output is optimally matched to the application—standard systems starting from 1,000 or 2,000 liters

Stanje: rabljeno, Leto izdelave: 2001, Wood processing dimensions: Infeed lengths min/max: 500 - 6500 mm Full optimization up to max: 1500 mm Infeed widths min/max: 40 - 300 mm Infeed thicknesses min/max: 15 - 120 mm Max. wood cross-sections: 300 x 40 mm or 200 x 120 mm Fixed lengths after saw min: 510 – 2800 mm Special application: Cutting blocks, min/max length: 100 – 200 mm (Note: Multiple block lengths during sorting; blocks are conveyed to the end of the sorting line and fall into customer-supplied mesh boxes) Cutting/trim tolerance: +/- 0.8 – 1.5 mm (depending on timber quality with minimal resin content and uniform surface. Tolerance up to 1 m fixed length; maximum tolerance for longer parts up to 2.5 m). Thickness tolerance: +/- 3 mm Wood curvature in all directions: max. 10 mm per meter length Wood species: Softwood or hardwood System performance: Feed speed, steplessly adjustable up to max. 230 m/min Duedpfx Aow Sy T Hofaou Cutting cycle: 0.6 – 1 s To determine actual daily output, an efficiency factor dependent on the customer’s production conditions must be applied. Working height infeed and saw: 900 mm (to be placed on customer-side platform; saw requires concrete base) Sorting working height: 2000 mm Connection data: Total electrical connection load: approx. 18 kW Operating voltage: 380 Volt / 50 Hz Voltage fluctuations max. 5 % Air consumption: approx. 1200 NL/min Operating pressure: approx. 8 bar Extraction speed: approx. 30 m/s Paint finish: pebble grey RAL 7032 and blue NCS 5030-R 80 B POSITION OVERVIEW: Pos. 1: Infeed and marking station with 1 adjustable side support table, 1 table as stop edge Pos. 2: Support roller without drive, front-facing sheets table for easier loading Pos. 3: Length measuring station with built-in fluorescence camera to detect error markings Pos. 4: Automatic, contactless width measurement Pos. 5: Optimizing cross-cut saw OptiCut 304 – right-hand version with integrated waste chute, incl. equipment package for large wood cross-sections Graphic-capable input terminal (16 x 40 characters, numeric keypad) with software package for optimization and system control Available for processing: - max. 16 product groups - max. 8 grades per product group - max. 200 fixed lengths per product group Pos. 6: Outfeed conveyor belt as sorting station with drive unit, length 7500 mm Pos. 7: 2 ejectors mounted on outfeed conveyor Location: Nattheim

Stanje: dober (rabljeno), Leto izdelave: 2011, Single-sided edge banding machine, right-hand version, with workpiece return system for hot-melt glue and/or PU gluing, used, year of manufacture 2011; approx. 8,700 operating hours Edge thickness: 0.4 – 10 mm Workpiece dimensions: Min. width: 70 mm, Min. height: 8 mm, Max. height: 60 mm, Min. length: 150 mm Feed speed: 14 – 20 m/min, infinitely variable Glue application: Glue application roller with Vario-melt dosing automation Working height: 900 mm Machine dimensions: Height: 1,600 mm, Width: 1,100 mm, Length: 8,200 mm Machine weight: 4,000 kg Machine equipped with: Duedpfszb Iuqox Afaju - Double pressure roller unit with electronic positioning - Pneumatic control of all units from the central touch-screen panel via Beckhoff industrial PC - CM – CombiMelt gluing system: Processing units: - Fk – Jointing unit for edge processing of particle boards with 2 HF motors 2.2 kW, 200 Hz, 12,000 rpm, working in both directions, path controlled. Tool: DIA jointing cutter set Ø 85 x 45 x 30, z=3, for panel thickness up to 42 mm - AKM – Edge magazine for automatic feeding of strip edges, with spiked roller feed and pneumatic pressure beam. Including optical edge monitoring - M4+1 – Fourfold magazine Automatic roll retraction. Holds four edge rolls. With variable edge chute for quick edge changes. With automatic selection menu. - K 13 – DOUBLE END TRIM UNIT with 2 HF-motors 0.6 kW, 200 Hz, 12,000 rpm, motors and saw blades pneumatically tiltable 0/5° - K 160 – 2 HM SAW BLADES 140 x 3.2 x 16 mm, Z 36 - Bfc – FLUSH MILLING UNIT for pre-milling of applied edges, operating against feed direction. Single-sided sensing, adjustment via program control. 2 HF motors 0.7 kW, 200 Hz, 12,000 rpm Tool: 2 carbide reversible tip heads Ø 70 x 20 x 16 mm, z 4 (HF70). - HFt – FINE MILLING UNIT for radius milling of applied edges, operating against feed. Double-sided sensing, automatic edge thickness adjustment via program control. 2 HF motors 0.3 kW, 200 Hz, 12,000 rpm Tool: 2 carbide reversible tip heads Ø 70 x 20 x 16 mm, Z 4 (HF70), optionally also equipped with radius tools - HFt – FINE MILLING UNIT for radius milling of applied edges, operating against feed. Double-sided sensing, automatic edge thickness adjustment via program control. 2 HF motors 0.3 kW, 200 Hz, 12,000 rpm Tool: 2 carbide radius reversible planer heads (AR 73), Ø 73 x 16 x 16, z 3 for R1 – R3 inserts. - AKF – AUTOMATIC CONTOUR TRIMMING with two separate work spindles for top and bottom. 2 HF motors 0.37 kW, 200 Hz, 12,000 rpm Tool: 2 PCD diamond radius cutters Ø 73 x 13 x Ø 16 With integrated dust extraction. - AZK 4 – automatic SCRAPER CHANGER UNIT - ZKf – SURFACE SCRAPER UNIT with fine-sensing device for residual hot-melt glue removal on the joint area – with extraction. Additional equipment: - AS – Antistatic spray unit, double, on the glue joint - GS – Glide spray unit for applying antistatic lubricant to the edge surface, electronically controlled - RS – Cleaning set with 4-fold spray unit and fine buffing device for surface cleaning - KEO-c – EDGE POLISHING UNIT, oscillating and automatic feed. 2 motors 0.2 kW, with 2 cloth wheels - WE – Angle infeed aid as folding pusher slide, for narrow parts. Interface for workpiece return system Ligmatech ZHR 05 or equivalent

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, vhodna napetost: 230 V, vrsta vhodnega toka: Klimatska naprava, laserska moč: 30 W, vrsta hlajenja: zrak, skupna širina: 1.550 mm, skupna višina: 2.050 mm, skupna dolžina: 900 mm, skupna masa: 120 kg, vrsta nastavitve višine: električni, širina odprtine vrat: 700 mm, višina odprtine vrat: 400 mm, potrebna širina: 1.550 mm, potrebna višina: 2.100 mm, valovna dolžina laserja: 1.064 nm, temperatura okolja (min.): 15 °C, okoljska temperatura (maks.): 35 °C, The universally applicable LAS 28 XLe laser marking system from Systemtechnik Hölzer GmbH can be used for a wide range of marking applications. With the integrated fiber laser, you can mark almost all materials such as steel, carbide, aluminum, and plastics. Depending on requirements, the system can be equipped with a 20, 30, or 50 watt fiber laser. In many industries, the use of a laser has become indispensable for permanent marking. The powerful laser software allows you to create texts, numbers, 2D codes, QR codes, and logos with just a few clicks and without extensive programming knowledge. The software can automatically increment serial and part numbers after prior setup. In addition, it can read data (variable information such as drawing numbers, project designations, etc.) from existing tables and automatically transfer them to predefined fields. Use of a handheld scanner is also possible. Dedpfx Afewlc Stoaouu The standard equipment includes an integrated PC with Windows operating system and laser software. Optionally, the LAS 28 XLe can be fitted with a rotary axis (3-jaw chuck) for marking cylindrical components. Further options, such as lateral extensions for marking long parts, motorized Z-axis, drawer systems, etc., are also available. Made in Germany Fiber laser 30 Watt (optionally 20 Watt or 50 Watt) • Class 1 laser • Wavelength 1064 nm • Marking field size 150x150 mm (optionally larger) • Signal lamp to indicate operating status • Optional: rotary axis (3-jaw chuck) • Optional: extraction system (incl. activated carbon filter) • Optional: digital height measurement system • Optional: autofocus system for automatic determination of focus distance • Marking software EZCAD available in German / English (other software available on request) • Pilot laser (simple preview, plain text preview) • Focus finder (easy focus adjustment) • Max. part height approx. 300 mm • Electrically adjustable Z-axis • Integrated PC with Windows operating system • IPS PCAP touch screen and keyboard tray, height adjustable • Frame made of aluminum profile • Air-cooled • Door width approx. 700 mm / door height (pass-through): approx. 400 mm • Power supply 230V • Dimensions: approx. 900 x 800 x 1900 mm (LxWxH) with monitor holder approx. 1500 x 800 x 1900 mm (LxWxH) • Weight: approx. 120 kg

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, vhodna napetost: 230 V, laserska moč: 30 W, vrsta hlajenja: zrak, skupna širina: 1.550 mm, skupna višina: 2.050 mm, skupna dolžina: 900 mm, skupna masa: 120 kg, vrsta nastavitve višine: električni, širina odprtine vrat: 700 mm, višina odprtine vrat: 400 mm, dolžina območja skeniranja: 150 mm, širina območja skeniranja: 150 mm, temperatura okolja (min.): 15 °C, okoljska temperatura (maks.): 35 °C, The LAS 28 XLe laser marking system from Systemtechnik Hölzer GmbH is a universally applicable, high-performance marking solution designed for industrial applications. It is suitable for precise and permanent marking of a wide range of materials including metals such as steel, aluminum, and hard metals, as well as plastics. The integration of a fiber laser ensures high marking quality while keeping maintenance requirements to a minimum. The system can be configured with fiber lasers in power classes of 20 W, 30 W, or 50 W, enabling optimal adaptation to different requirements concerning material type, marking depth, and cycle time. In many industrial sectors, the use of this technology is indispensable due to the durability and abrasion resistance of the markings. The included laser software allows the creation and positioning of content such as texts, numbering, 2D codes (e.g., DataMatrix), QR codes, and logos. Automatic serialization logic enables the generation of consecutive serial numbers without manual intervention. Additionally, the software supports importing and processing of external data sources (e.g., Excel spreadsheets) for variable contents like drawing numbers or project names. Integration of a hand scanner for data capture is optionally available. By default, the LAS 28 XLe is delivered with an integrated industrial PC (Windows-based) and fully installed laser software. Various options are available to expand its functionality, including a rotary axis (3-jaw chuck) for marking cylindrical components, side arms for processing long parts, a motorized Z-axis, and modular drawer systems for part feeding. Made in Germany Fiber laser: 30 W, 20 W, or 50 W • Laser class 1 • Wavelength: 1064 nm • Marking field size: 150 x 150 mm (optionally larger) • Signal tower for operating status display • Optional: Rotary axis (3-jaw chuck) • Optional: Extraction system (incl. activated carbon filter) • Optional: Digital height measurement system Duodowkpx Rspfx Afaou • Optional: Autofocus system – automatic focus distance determination • Optional: Side arms for large components (single or double-sided) • Optional: Programmable X, Y, and Z axes (software controlled) • EZCAD marking software (German/English) • Pilot laser (easy preview, plain text preview) • Focus finder (simple focus adjustment) • Max. component height approx. 300 mm • Electrically adjustable Z-axis • Integrated PC with Windows OS • Height-adjustable monitor and keyboard shelf • Aluminium profile frame • Air-cooled • Door width approx. 700 mm / Door height (pass-through): approx. 400 mm • Power supply: 230 V • Dimensions: approx. 900 x 800 x 1900 mm (LxWxH) with monitor holder: approx. 1500 x 800 x 1900 mm (LxWxH) • Weight: approx. 120 kg

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, laserska moč: 30 W, vrsta hlajenja: zrak, skupna masa: 45 kg, vrsta nastavitve višine: električni, dolžina območja skeniranja: 110 mm, širina območja skeniranja: 110 mm, valovna dolžina laserja: 1.064 nm, temperatura okolja (min.): 15 °C, okoljska temperatura (maks.): 35 °C, The LAS 22 is a compact desktop unit with a small working area, ideal for marking small components. Thanks to its compact design, the system is extremely user-friendly and can be used virtually anywhere. The universally applicable LAS 22 laser marking system from Systemtechnik Hölzer GmbH is suitable for a very wide range of marking applications. With the integrated fiber laser, you can mark almost any material, such as steel, carbide, aluminum, and plastics. Depending on requirements, the system can be equipped with a 20 or 30-watt fiber laser. In many industries, laser marking is essential for permanent markings. The powerful laser software allows you to create texts, numbers, 2D codes, QR codes, and logos with just a few clicks, without requiring extensive programming knowledge. The software can automatically increment serial and article numbers after initial configuration. Moreover, the software can read data (variable information such as drawing numbers, project names, etc.) from existing tables and automatically transfer it to predefined fields. Using a hand scanner is also possible. Standard equipment includes a laptop with Windows operating system and laser software. Optionally, the LAS 22 laser model can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. - Fiber laser 30 watt (optional: 20 watt) - Laser class 1 - Wavelength: 1064 nm - Marking field size: 110 x 110 mm - Marking software EZCAD in German / English - Pilot laser (easy preview, contour preview) - Focus finder (simple focusing) - Max. workpiece height approx. 95 mm - Grid holes for fixtures - Clamping area: 310 x 190 mm - Electrically adjustable Z-axis - Electric door with pinch protection stop - Optional: extraction system (incl. activated carbon filter) - Welded steel sheet construction - Connection: 230 V - Air-cooled - Laptop with Windows OS (German or English) - Dimensions (LxWxH): 600 x 400 x 690 mm - Weight: approx. 45 kg Dodpfx Afsuy H Nqjasuu

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, vhodna napetost: 230 V, vrsta vhodnega toka: Klimatska naprava, laserska moč: 30 W, vrsta hlajenja: zrak, skupna širina: 400 mm, skupna višina: 690 mm, skupna dolžina: 600 mm, skupna masa: 45 kg, vrsta nastavitve višine: električni, dolžina območja skeniranja: 110 mm, širina območja skeniranja: 110 mm, potrebna višina: 900 mm, valovna dolžina laserja: 1.064 nm, temperatura okolja (min.): 15 °C, okoljska temperatura (maks.): 35 °C, vhodna frekvenca: 50 Hz, vrsta laserja: vlakenski laser, The LAS 22 is a compact tabletop unit with a small working area, making it ideally suited for small parts or, for example, nameplates. Due to its compact design, the machine is very practical and can be used virtually anywhere. The device is very easy to operate and requires no programming knowledge. With the powerful laser software, texts, numbers, 2D codes, QR codes, and logos can be created in just a few clicks, without extensive programming skills. The software automatically increments serial and item numbers after initial setup. In addition, the software can retrieve data (such as variable information like drawing numbers, project names, etc.) from existing tables and automatically transfer it to predefined fields. The use of a handheld scanner is also possible. A laptop with a Windows operating system and laser software comes as standard. Optionally, the LAS 22 laser model can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. - 30-watt fiber laser (optional: 20 watts, 50 watts) - Laser class 1 - Wavelength 1064 nm - Marking field size 110 x 110 mm - Marking software EZCAD in German/English - Pilot laser (easy preview/contour preview) - Focus finder (easy focusing) - Max. component height approx. 95 mm - Grid bores for fixtures - Clamping area 310 x 190 mm - Electrically adjustable Z-axis - Electric door with pinch protection - Optional: Fume extraction (incl. activated carbon filter) - Welded construction made of sheet steel - 230 V connection - Air-cooled - Laptop with Windows operating system (German or English) - Dimensions (W x D x H): 600 x 400 x 690 mm - Weight: approx. 45 kg - Low operating costs Dodoy I Nbmepfx Afajuu