Mikroskop Vickers Microplan 10X nakup rabljenega (662)

Stanje: rabljeno, To je oglas za objektiv Vickers Microplan 10X za mikroskop. Enota je v popolnoma delujočem stanju in je pripravljena za takojšnjo uporabo. Opis: Objektiv za mikroskop Vickers Microplan 10× Gre za objektiv – torej del optičnega sistema mikroskopa, ne za celoten mikroskop. Konkretno gre za objektiv z oznako "Vickers England MICROPLAN 10/0.25 + PH.1", kar pomeni 10-kratno povečavo in numerično aperturo (NA) 0,25. Oznaka "PH.1" označuje, da gre za fazno kontrastni objektiv. Standardna dolžina znaša okoli 37–39 mm, teža pa med 58 in 63 g. Gsdpsxhfduofx Aa Usuc Uporaba in vrednost Ti objektivi s fazno kontrastno tehniko so izdelani za uporabo na mikroskopih, ki podpirajo takšno optično metodo. Ta objektiv je primeren za revolverje z RMS navojem, ki so značilni za mikroskope Vickers, Cooke‑Baker ali podobne tipe stojal. Fazni obroč (PH.1) omogoča izboljšano opazovanje prosojnih vzorcev, saj fazne razlike pretvarja v kontrast – idealno za uporabo v biologiji ali pri opazovanju nebarvanih preparatov.

Stanje: rabljeno, Ta oglas velja za 1 od 2 binokularnih mikroskopov Vickers Instruments. Naprava je popolnoma delujoča in pripravljena za takojšnjo oddajo. Guodpfx Aajxxzmys Uoc

Stanje: rabljeno, Pogon Vickers DBM-03 / DBM-L2A / CG1616 03- za 2 osi: 25/70 ECC 50/140 ECC Guodpoyxg Tzefx Aa Uec - Odstranjeno iz stroja Ferromatik E50 - Odstranjeno iz delujočega stroja - Popolnoma funkcionalno Proizvajalec: Vickers Tip: DBM-03 / DBM-L2A Št. proizvajalca: CG1616 03 Št. nadomestnega dela: 1676559190

Stanje: rabljeno, Tlačni tlak / bar Pretok v litrih / l Pogonska moč 5,5 kW Gsdpfezcgipjx Aa Usuc Hidravlična črpalka z motorjem Tehnični podatki (motor) Proizvajalec: BROOK HANSEN Tip: WU-DA132SJ-D Koda: A581502 obr/min: 1450 Moč: 5,5 kW Tehnični podatki (hidravlična črpalka) Proizvajalec: VICKERS Tip: PV010A2R Skupna teža: 190 kg

Stanje: zelo dobro (rabljeno), Wild Heerbrugg M3 – profesionalni stereoskopski mikroskop Ponujam visokokakovostni stereoskopski mikroskop priznane švicarske znamke Wild Heerbrugg. Naprava se uporablja v laboratorijih, nadzoru kakovosti, elektroniki, zlatarstvu, urarstvu ter pri natančnih delih. Tehnične specifikacije: • Proizvajalec: Wild Heerbrugg • Model: M3 • Država proizvodnje: Švica • Binokularna glava • Nastavitev ostrine • Masiven laboratorijski stativ • Visokokakovostna optika Stanje: Guedpezagapefx Aa Ujc Rabljen predmet. Vizualno v dobrem stanju, vidne običajne sledi uporabe. Prodaja se v konfiguraciji prikazani na fotografijah.

Stanje: dober (rabljeno), Technical data for the locking pin: System: Arestant Type: AS Scope of delivery: 10x locking pins, used Material colour: fully galvanized Weight: 0.018 kg/pc For securing longitudinal beams against unintentional lifting Your contact persons at our company: Gusdew Hbhpepfx Aa Usc Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is only offered for collection. Any desired transport or shipment of this item is associated with additional costs, which can be requested from us separately depending on the place of delivery and the scope of delivery.

Leto izdelave: 1998, stanje: rabljeno, številka stroja/vozila: MBMAKZDoppel, 1 piece - Demag chain hoist crane lifting unit 250kg DKUND 2-250 K V1 with double chain, each with 125kg load capacity 10 units available 250kg / 0.25t load capacity / lifting capacity - single strand Distance between the two lifting chains variable: 20-120cm, lifting height approx. 3m Without frame, only the chain hoist with both chain return pulleys incl. blue mounting plates is sold Guedpfx Aajtn Rito Usc Total weight approx. 50kg, connection: 400V 50Hz TOP condition, fully functional. No worn-out or used-up unit! Connect and put into operation. Taken directly from ongoing operations Item location: 75053 Gondelsheim See pictures

Stanje: zelo dobro (rabljeno), For sale: Professional automatic Vickers hardness tester Mitutoyo HV-100, made in Japan, in excellent technical and visual condition. The device is equipped with the AUTOVICK automatic measurement system and the Mitutoyo Vision Unit module, enabling fast, repeatable, and fully automatic hardness measurements without subjective operator influence. This equipment is intended for measurement laboratories, quality control departments, manufacturing plants, the automotive and aerospace industries, as well as tool rooms. — Key information: • Measurement method: Vickers (HV) • Model: HV-100 (series HV-100B / HV-100C / 100D) • Load range: up to 100 kgf • AUTOVICK automatic system • Integrated Mitutoyo Vision Unit module • Automatic indentation recognition and HV calculation • Made in Japan Gjdsyc H I Sjpfx Aa Ueuc • Power supply: 230 V • Stable, heavy-duty laboratory construction — Technical condition: • Device is operational and complete • Very good visual condition • Regularly used in industrial environment • Last technical inspection: 2020 • Ready for operation upon connection — Included in the set: • Mitutoyo HV-100 hardness tester • Vision Unit (measurement camera) • AUTOVICK automatic system • Set of weights • Original accessories and holders • Transport crates with equipment • Original Mitutoyo documentation and manuals • Weight: 65 kg.

Stanje: rabljeno, Leto izdelave: 2002, Funkcionalnost: popolnoma funkcionalen, skupna višina: 850 mm, skupna širina: 1.000 mm, skupna dolžina: 1.000 mm, skupna masa: 1.000 kg, višina plošče: 160 mm, Granite Surface Plate - Dimensions: 1000 x 1000 x 160 mm - Accuracy grade 1 or 0 (to be verified by measurement) Gsdpsvki S Ejfx Aa Uouc - Supplied with steel tube frame and cabinet - Optional roof structure available upon request

Stanje: rabljeno, Hydraulic Power Unit with RACINE / VICKERS Hydraulic Pump Hydraulic Power Pack Operating pressure: max. 44 bar Flow rate: 13 litres/min. Tank capacity: 40 litres Motor speed: 950 rpm Motor power: 0.75 kW Power supply: 380 Volt, 50 Hz Godpfsgprpnox Aa Ueuc - 1 x hydraulic vane pump PVQ-PSS=-06CR-J11 - Hydraulic tank with maintenance cover and oil level sight glass - 2 x hydraulic hoses with 12L fittings, length = 950 mm Required space (L x W x H): 700 x 400 x 750 mm Net weight: 97 kg (without oil)

Stanje: pripravljen za uporabo (rabljen), Hydraulic power unit was used to drive 2 hydraulic motors Power: 45 kW Max. pressure: 210 bar Tank: 100 l Flow rate: 95 l/min Godpfektkg Eox Aa Ujuc

Stanje: generalkompletno obnovljen (rabljeno), Hydraulic pump Sperry Vickers Type: GPA2-10-E-30-R-GE 334 Godpod Szm Tefx Aa Usuc with attached clutch, gear motor Leroy - Somer from coupling technology

Stanje: rabljeno, Leto izdelave: 1984, Radial piston motor Gusdshpiiqjpfx Aa Uec Radial piston engine Oil motor Oil motor suitable for Dimter DKV 5

Stanje: nepreverjeno (rabljeno), Hydraulic power units for Dimter DKV III throughfeed press, output 2 x 22 kW Gsdshtrpropfx Aa Ueuc

Stanje: rabljeno, Hidravlična enota, hidravlična enota VICKERS Št. naročila: 62357390 Leto izdelave: ca. 1985 Godpfoxf Uyaox Aa Ujuc Obratovalni tlak glavne črpalke: 60 barov Pretok glavne črpalke: 16 litrov/min. Obratovalni tlak hladilne obtokovne črpalke: 5 barov Pretok hladilne obtokovne črpalke: 5 litrov/min. Prostornina rezervoarja: 160 litrov Moč motorja: 2,2 kW Omrežni priključek: 400 V, 50 Hz - 2 kosa hidravličnih črpalk: 1x glavna črpalka in 1x hladilna obtokovna črpalka - 1 kos tlačnega akumulatorja BOSCH 2 litra - Regulator za omejevanje tlaka - Hidravlični filter - Pokrov za čiščenje Potrebni prostor D x Š x V: 1000 x 620 x 1100 mm Lastna teža: ca. 150 kg Dobro stanje

Stanje: rabljeno, Piston diameter 0 0 Max. stroke length 0 0 Godpfx Aed Ig Uvsa Uouc 2 cabinets full of hydraulic and pneumatic spare parts from Rexroth, Parker, Vickers, Festo, Wabco, and Orsta! Cabinets not included, only the spare parts! Some parts are unused. Detailed photos can be provided.

Stanje: rabljeno, Hydraulic power unit, hydraulic pump -Electric motor SIDO type: D160L-84 -Motor power: 7.5/12 kW -Speed: 720/1435 rpm -Hydraulic pump Sperry Vickers type: GC4/40/3/10 -Max. pressure: bar Gujdoc Il Dwopfx Aa Usc -Dimensions: 960/400/H520 mm -Weight: 242 kg

Stanje: rabljeno, Hydraulic power unit, hydraulic pump - Electric motor - Motor power: 5.5 kW - Speed: 1,435 rpm - Hydraulic pump - Max. pressure: 60 bar Gujdpjdcfmqofx Aa Uec - Flow rate: 50 l/min - Dimensions: 720 x 640 x H700 mm - Weight: 145 kg

Stanje: rabljeno, Double hydraulic pump, oil pump, gear pump Gsdpjcdp Erjfx Aa Usuc - Capacity: approx. 1.5 l - Electric: 1.1 kW, 1380 rpm - Protection class: IP 55 - Hydraulic valve - Pressure relief valve - Pressure gauge - Dimensions: 575/285/H230 mm - Weight: 23 kg

Stanje: dober (rabljeno), Hydraulic power unit, hydraulic pump, piston pump (axial piston pump) Gujdpfxjb A Hcnj Aa Ujc - Housing material: stainless steel - Drive power: 11 kW - Speed: 1750 rpm - Pump: Vickers PVB10 RSV31 CG20 - Flow rate: approx. 36 L/min - Pressure: 210 bar - Hydraulic valve - Filter - Hydraulic tank dimensions: 500/450/H370 mm - Overall dimensions: 520/330/H600 mm - Weight: 320 kg

Stanje: dober (rabljeno), Hydraulic power unit, hydraulic pump Gujdsb A Rzdspfx Aa Usc - Maximum pressure: approx. 150 bar - Flow rate: approx. 30 l/min - Drive: 3 kW, 1400 rpm - Dimensions: 520 x 360 x H340 mm - Weight: 65 kg

Stanje: dober (rabljeno), 4/3-potni ventil, magnetni ventil, hidravlični ventil, tlačni ventil, ventilni blok, krmilni blok -Tip: DG4V-3-6C -Količina: 1 kos na voljo Guedpfx Aajb A Sf De Ujc -Teža: 2,5 kg

Stanje: dober (rabljeno), 4/2 way valve, solenoid valve, hydraulic valve, air valve, pressure valve, valve block, control block -Type: DG4V-3 2A M U H7 6Q Gjdpeb A Sf Hjfx Aa Ujuc -Weight: 2 kg

Stanje: zelo dobro (rabljeno), Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 5B0S000433, No reserve price – guaranteed sale to the highest bidder! The original purchase price of the microscope was approximately €100,000! Further technical details can be found in the attached data sheet! TECHNICAL DETAILS Maximum magnification: x1000 Camera: VHX-7100 Sensor size: 1/1.7 inch Sensor type: 12.22-megapixel CMOS sensor Total pixels (H x V): 4,168 × 3,062 Virtual pixels (H x V): 4,024 × 3,036 High-speed (H x V): 2,048 × 1,536 High-resolution, 4K mode OFF (H x V): 2,880 × 2,160 High-resolution, 4K mode ON (H x V): 4,000 × 3,000 Ultra-high resolution (H x V): 12,000 × 9,000 Electronic shutter: 1/30, 1/60, 1/120, 1/250, 1/500, 1/1,000, 1/2,000, 1/5,000, 1/9,000, 1/19,000 Supercharge shutter: 0.01 s steps from 0.03 to 4 s LCD Monitor Size: 27-inch color LCD Screen dimensions (H x V): 596.16 × 335.34 mm Pixel pitch (H x V): 0.15525 × 0.15525 mm Number of pixels (H x V): 3,840 × 2,160 Displayable colors: approx. 1.07 billion Viewing angle: ±89° horizontal, ±89° vertical Stand: VHX-S770E Travel range of XY stage: ±50 mm XYθ stage size (surface): 233 × 185 mm Maximum motorized XY stage speed: 20 mm/s Z stage travel range: 49 mm Load capacity: 5 kg Gusdpfx Aaozb Eixe Uoc Weight: 25.3 kg MACHINE DETAILS Connection: Digital Dimensions & Weight Dimensions without protruding parts (W x H x D): 635 x 450 x 132 mm Controller weight: 10.8 kg EQUIPMENT KEYENCE VHX-X1 microscope unit VHX-AX1D control console OP-88885 processing unit VHX-7100 camera unit VH-Z00T lens High-performance lens VH-Z100 Motorized tilting head Motorized precision stand VHX-S770E Large motorized XY stage VHX-H6M software module OP-88164 ring light and illumination adapter 3D profile measurement Manufacturer documentation Original accessories

Stanje: pripravljen za uporabo (rabljen), X-os: 300 mm, Y-os: 200 mm, Z-os: 200 mm, delovna razdalja: 77 mm, maks. višina obdelovanca: 200 mm, maks. teža obdelovanca: 20 kg, dolžina: 730 mm, širina: 900 mm, višina: 950 mm, teža: 125 kg, optična napaka merjenja dolžine (2D): 2,9 + L/100 µm (L v mm) pri 20°C ±1K, taktilna napaka merjenja dolžine (MM2/TP20): 4 + L/75 µm (L v mm), optični objektiv: 1,5-kratni, povečava zaslona: 47- do 80-kratna, vidno polje: 4,5 x 3,5 mm, kamera: 1,3-megapikselni CMOS z avtomatskim ostrenjem. Oprema: 3-osni CNC krmiljenje preko servomotorja in joysticka, merilna programska oprema IK 5000, merilni računalnik IK 5000 za 2D- in 3D-geometrijske meritve, integriran CAD modul za podatke DXF in IGES, samodejna fit rutina za primerjavo prostih oblikovnih kontur, rutina za skaliranje, kontrola toleranc v skladu z DIN ISO 1101, izvoz podatkov v Microsoft Office ali v baze podatkov/SPC/QS sisteme prek vmesnika ODBC, generator poročil za poljubno definirane merilne naloge, shranjevanje izvedenih akcij kot merilni makro. Ogled na lokaciji je možen. Gusdozc Rdwopfx Aa Usc